"description":"All settings for a Adaptive Lighting component. The option names correspond with the YAML settings. No options are shown if you have this entry defined in YAML.",
"sleep_transition":"sleep_transition: Duration of transition when \"sleep mode\" is toggled in seconds. 😴",
"transition_until_sleep":"transition_until_sleep: When enabled, Adaptive Lighting will treat sleep settings as the minimum, transitioning to these values after sunset. 🌙",
"brightness_mode":"brightness_mode: Brightness mode to use. Possible values are `default`, `linear`, and `tanh` (uses `brightness_mode_time_dark` and `brightness_mode_time_light`). 📈",
"brightness_mode_time_dark":"brightness_mode_time_dark: (Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness before/after sunrise/sunset. 📈📉",
"brightness_mode_time_light":"brightness_mode_time_light: (Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness after/before sunrise/sunset. 📈📉.",
"take_over_control":"take_over_control: Disable Adaptive Lighting if another source calls `light.turn_on` while lights are on and being adapted. Note that this calls `homeassistant.update_entity` every `interval`! 🔒",
"detect_non_ha_changes":"detect_non_ha_changes: Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Disable this feature if you encounter such issues.",
"only_once":"only_once: Adapt lights only when they are turned on (`true`) or keep adapting them (`false`). 🔄",
"adapt_only_on_bare_turn_on":"adapt_only_on_bare_turn_on: When turning lights on initially. If set to `true`, AL adapts only if `light.turn_on` is invoked without specifying color or brightness. ❌🌈 This e.g., prevents adaptation when activating a scene. If `false`, AL adapts regardless of the presence of color or brightness in the initial `service_data`. Needs `take_over_control` enabled. 🕵️ ",
"separate_turn_on_commands":"separate_turn_on_commands: Use separate `light.turn_on` calls for color and brightness, needed for some light types. 🔀",
"send_split_delay":"send_split_delay: Delay (ms) between `separate_turn_on_commands` for lights that don't support simultaneous brightness and color setting. ⏲️",
"adapt_delay":"adapt_delay: Wait time (seconds) between light turn on and Adaptive Lighting applying changes. Might help to avoid flickering. ⏲️",
"skip_redundant_commands":"skip_redundant_commands: Skip sending adaptation commands whose target state already equals the light's known state. Minimizes network traffic and improves the adaptation responsivity in some situations. 📉Disable if physical light states get out of sync with HA's recorded state.",
"multi_light_intercept":"multi_light_intercept: Intercept and adapt `light.turn_on` calls that target multiple lights. ➗⚠️ This might result in splitting up a single `light.turn_on` call into multiple calls, e.g., when lights are in different switches.",
"include_config_in_attributes":"include_config_in_attributes: Show all options as attributes on the switch in Home Assistant when set to `true`. 📝"
"description":"Applies the current Adaptive Lighting settings to lights.",
"fields":{
"entity_id":{
"description":"The `entity_id` of the switch with the settings to apply. 📝",
"name":"entity_id"
},
"lights":{
"description":"A light (or list of lights) to apply the settings to. 💡",
"name":"lights"
},
"transition":{
"description":"Duration of transition when lights change, in seconds. 🕑",
"name":"transition"
},
"adapt_brightness":{
"description":"Whether to adapt the brightness of the light. 🌞",
"name":"adapt_brightness"
},
"adapt_color":{
"description":"Whether to adapt the color on supporting lights. 🌈",
"name":"adapt_color"
},
"prefer_rgb_color":{
"description":"Whether to prefer RGB color adjustment over light color temperature when possible. 🌈",
"name":"prefer_rgb_color"
},
"turn_on_lights":{
"description":"Whether to turn on lights that are currently off. 🔆",
"name":"turn_on_lights"
}
}
},
"set_manual_control":{
"name":"set_manual_control",
"description":"Mark whether a light is 'manually controlled'.",
"fields":{
"entity_id":{
"description":"The `entity_id` of the switch in which to (un)mark the light as being `manually controlled`. 📝",
"name":"entity_id"
},
"lights":{
"description":"entity_id(s) of lights, if not specified, all lights in the switch are selected. 💡",
"name":"lights"
},
"manual_control":{
"description":"Whether to add (\"true\") or remove (\"false\") the light from the \"manual_control\" list. 🔒",
"name":"manual_control"
}
}
},
"change_switch_settings":{
"name":"change_switch_settings",
"description":"Change any settings you'd like in the switch. All options here are the same as in the config flow.",
"fields":{
"entity_id":{
"description":"Entity ID of the switch. 📝",
"name":"entity_id"
},
"use_defaults":{
"description":"Sets the default values not specified in this service call. Options: \"current\" (default, retains current values), \"factory\" (resets to documented defaults), or \"configuration\" (reverts to switch config defaults). ⚙️",
"name":"use_defaults"
},
"include_config_in_attributes":{
"description":"Show all options as attributes on the switch in Home Assistant when set to `true`. 📝",
"name":"include_config_in_attributes"
},
"turn_on_lights":{
"description":"Whether to turn on lights that are currently off. 🔆",
"name":"turn_on_lights"
},
"initial_transition":{
"description":"Duration of the first transition when lights turn from `off` to `on` in seconds. ⏲️",
"name":"initial_transition"
},
"sleep_transition":{
"description":"Duration of transition when \"sleep mode\" is toggled in seconds. 😴",
"name":"sleep_transition"
},
"max_brightness":{
"description":"Maximum brightness percentage. 💡",
"name":"max_brightness"
},
"max_color_temp":{
"description":"Coldest color temperature in Kelvin. ❄️",
"name":"max_color_temp"
},
"min_brightness":{
"description":"Minimum brightness percentage. 💡",
"name":"min_brightness"
},
"min_color_temp":{
"description":"Warmest color temperature in Kelvin. 🔥",
"name":"min_color_temp"
},
"only_once":{
"description":"Adapt lights only when they are turned on (`true`) or keep adapting them (`false`). 🔄",
"name":"only_once"
},
"prefer_rgb_color":{
"description":"Whether to prefer RGB color adjustment over light color temperature when possible. 🌈",
"name":"prefer_rgb_color"
},
"separate_turn_on_commands":{
"description":"Use separate `light.turn_on` calls for color and brightness, needed for some light types. 🔀",
"name":"separate_turn_on_commands"
},
"send_split_delay":{
"description":"Delay (ms) between `separate_turn_on_commands` for lights that don't support simultaneous brightness and color setting. ⏲️",
"name":"send_split_delay"
},
"sleep_brightness":{
"description":"Brightness percentage of lights in sleep mode. 😴",
"name":"sleep_brightness"
},
"sleep_rgb_or_color_temp":{
"description":"Use either `\"rgb_color\"` or `\"color_temp\"` in sleep mode. 🌙",
"name":"sleep_rgb_or_color_temp"
},
"sleep_rgb_color":{
"description":"RGB color in sleep mode (used when `sleep_rgb_or_color_temp` is \"rgb_color\"). 🌈",
"name":"sleep_rgb_color"
},
"sleep_color_temp":{
"description":"Color temperature in sleep mode (used when `sleep_rgb_or_color_temp` is `color_temp`) in Kelvin. 😴",
"name":"sleep_color_temp"
},
"sunrise_offset":{
"description":"Adjust sunrise time with a positive or negative offset in seconds. ⏰",
"name":"sunrise_offset"
},
"sunrise_time":{
"description":"Set a fixed time (HH:MM:SS) for sunrise. 🌅",
"name":"sunrise_time"
},
"sunset_offset":{
"description":"Adjust sunset time with a positive or negative offset in seconds. ⏰",
"name":"sunset_offset"
},
"sunset_time":{
"description":"Set a fixed time (HH:MM:SS) for sunset. 🌇",
"description":"Disable Adaptive Lighting if another source calls `light.turn_on` while lights are on and being adapted. Note that this calls `homeassistant.update_entity` every `interval`! 🔒",
"description":"Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Disable this feature if you encounter such issues.",
