Documentation, BOM and source code

Documentation, BOM and source code

Co-Authored-By: Robert Turinský <rturinsky@users.noreply.github.com>

BOM/E-AXIS.md

@@ -0,0 +1,51 @@
+![e-axis](img/e-axis.png?raw=true "e-axis")
+
+**PRINTED PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|MINI-extruder-front|1|
+|MINI-extruder-idler|1|
+|MINI-extruder-rear|1|
+|MINI-inspection-door|1|
+
+**FASTENERS**
+
+|Name|Qty|
+|:---------------|:---:|
+|M3x12 screw|3|
+|M3x25 screw|6|
+|M3x40 screw|1|
+|M3n|4|
+|M3nN|1|
+|M3nS|1|
+
+**ELECTRICAL PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|[MINI-E-axis motor](/DOCUMENTATION/ELECTRONICS/mini-motor-kit.pdf)|1|
+
+
+**STANDARD PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|Bearing 625 2Z|2|
+|MINI extruder idler spring|1|
+|Zip tie|3|
+
+
+**CUSTOM PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|[MINI fitting](/DOCUMENTATION/MECHANICAL%20PARTS/mini-fitting.pdf)|1|
+|[MINI fitting swivel nut](/DOCUMENTATION/MECHANICAL%20PARTS/mini-fitting-swivel-nut.pdf)|1|
+|[MINI fitting olive](/DOCUMENTATION/MECHANICAL%20PARTS/mini-fitting-olive.pdf)|1|
+|[MINI motor pinion](/DOCUMENTATION/MECHANICAL%20PARTS/mini-motor-pinion.pdf)|1|
+|[MINI filament spur](/DOCUMENTATION/MECHANICAL%20PARTS/mini-extruder-spur.pdf)|1|
+|[MINI extruder PTFE tube 4x2x15](/DOCUMENTATION/MECHANICAL%20PARTS/PTFE-tube-extruder-15.pdf)|1|
+|[MINI input PTFE tube 4x2x150](/DOCUMENTATION/MECHANICAL%20PARTS/PTFE-tube-input-150.pdf)|1|
+|[MINI bowden 4x2x275](/DOCUMENTATION/MECHANICAL%20PARTS/PTFE-tube-bowden-275.pdf)|1|
+|[MINI shaft 5x12](/DOCUMENTATION/MECHANICAL%20PARTS/mini-idler-shaft.pdf)|1|

BOM/FILAMENT SENSOR.md

@@ -0,0 +1,37 @@
+![fs](img/fs.png?raw=true "fs")
+
+**PRINTED PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|MINI-Fsensor-box|1|
+|MINI-Fsensor-cover|1|
+|MINI-Fsensor-lever|1|
+
+**FASTENERS**
+
+|Name|Qty|
+|:---------------|:---:|
+|M3x12 screw|4|
+|M2x8 screw|1|
+
+**ELECTRICAL PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|[IR filament sensor](https://github.com/prusa3d/MKxS-IR-sensor)|1|
+|[IR filament sensor cable](/DOCUMENTATION/ELECTRONICS/mini-filament-sensor-cable.pdf)|1|
+
+**STANDARD PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|Magnet 10x6x2|2|
+|Stainless steel ball 7mm|1|
+
+**CUSTOM PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|[MINI FS textile sleeve](/DOCUMENTATION/MECHANICAL%20PARTS/mini-oplet-5x300.pdf)|1|
+|[MINI FS PTFE 4x2x15](/DOCUMENTATION/MECHANICAL%20PARTS/PTFE-tube-extruder-15.pdf)|1|

BOM/SPOOLHOLDER.md

@@ -0,0 +1,28 @@
+![spoolholder](img/spoolholder.png?raw=true "spoolholder")
+
+**PRINTED PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|MINI-spoolholder-base|4|
+|MINI-spoolholder-rail|2|
+
+**FASTENERS**
+
+|Name|Qty|
+|:---------------|:---:|
+|M3x8 screw|4|
+|M3x12 screw|4|
+|M3n|4|
+		
+**STANDARD PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|Bearing 608 2Z|4|
+
+**CUSTOM PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|[MINI spoolholder foam pads](/DOCUMENTATION/MECHANICAL%20PARTS/mini-s-holder-pads.pdf)|4|

BOM/X-AXIS.md

@@ -0,0 +1,64 @@
+![x-axis](img/x-axis.png?raw=true "x-axis")
+
+**PRINTED PARTS**		
+
+|Name|Qty|
+|:---------------|:---:|
+|MINI-x-carriage|1|
+|MINI-x-end|1|
+|MINI-z-carriage-front|1|
+|MINI-z-carriage-rear|1|
+|MINI-fan-spacer|1|
+|MINI-fan-spacer-clip|1|
+|MINI-minda-holder|1|
+
+**FASTENERS**
+
+|Name|Qty|
+|:---------------|:---:|
+|M3x12 screw|12|
+|M3x20 screw|9|
+|M3x30 screw|4|
+|M3x10 button head screw|1|
+|M3x4 grub screw|4|
+|M3n|4|
+|M3nN|1|
+|M3nS|13|
+
+**ELECTRICAL PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|[MINI hotend thermistor](/DOCUMENTATION/ELECTRONICS/mini-termistor.pdf)|1|
+|[MINI heater](/DOCUMENTATION/ELECTRONICS/mini-heater.pdf)|1|
+|[MINI heatsink fan](/DOCUMENTATION/ELECTRONICS/mini-extruder-fan.pdf)  ([DS](/DOCUMENTATION/ELECTRONICS/mini-extruder-fan-DS.pdf))|1|
+|[MINI print fan](/DOCUMENTATION/ELECTRONICS/mini-turbine-fan.pdf)  ([DS](/DOCUMENTATION/ELECTRONICS/mini-turbine-fan-DS.pdf))|1|
+|[MINI M.I.N.D.A.](/DOCUMENTATION/ELECTRONICS/mini-minda.pdf)|1|
+|[2S connector](/DOCUMENTATION/ELECTRONICS/mini-2s.pdf)|1|
+|[MINI X-axis motor](/DOCUMENTATION/ELECTRONICS/mini-motor-kit.pdf)|1|
+
+**STANDARD PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|LM8UU linear bearing	|2|
+|LM10LUU linear bearing|2|
+|Pulley Bearing Idler 623h|1|
+|Pulley Motor GT2-16|1|
+|X-axis belt 561 mm|1|
+
+**CUSTOM PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|[MINI X smooth rod](/DOCUMENTATION/MECHANICAL%20PARTS/mini-x-rod.pdf)|2|
+|[MINI heatsink](/DOCUMENTATION/MECHANICAL%20PARTS/mini-heatsink.pdf)|1|
+|[MINI heatbreak](/DOCUMENTATION/MECHANICAL%20PARTS/mini-heatbreak.pdf)|1|
+|[MINI heaterblock](/DOCUMENTATION/MECHANICAL%20PARTS/mini-heaterblock.pdf)|1|
+|[MINI nozzle 0.4](/DOCUMENTATION/MECHANICAL%20PARTS/mini-nozzle.pdf)|1|
+|[MINI fitting](/DOCUMENTATION/MECHANICAL%20PARTS/mini-fitting.pdf)|1|
+|[MINI fitting swivel nut](/DOCUMENTATION/MECHANICAL%20PARTS/mini-fitting-swivel-nut.pdf)|1|
+|[MINI fitting olive](/DOCUMENTATION/MECHANICAL%20PARTS/mini-fitting-olive.pdf)|1|
+|[MINI hotend PTFE tube 4x2x43.4](/DOCUMENTATION/MECHANICAL%20PARTS/PTFE-tube-hotend.pdf)|1|
+|[MINI X motor textile sleeve](/DOCUMENTATION/MECHANICAL%20PARTS/mini-oplet-5x300.pdf)|1|
+|[MINI hotend textile sleeve](/DOCUMENTATION/MECHANICAL%20PARTS/mini-oplet-8x700.pdf)|1|

BOM/Y-AXIS.md

@@ -0,0 +1,62 @@
+![y-axis](img/y-axis.png?raw=true "y-axis")
+
+**PRINTED PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|MINI-y-belt-holder|1|		
+|MINI-y-idler|1|
+|MINI-y-plate-front|1|	
+|MINI-y-plate-rear|1|		
+|MINI-heatbed-cable-cover-bottom|1|
+|MINI-heatbed-cable-cover-top|1|		
+|MINI-display-box|1|		
+|MINI-knob|1|		
+
+**FASTENERS**
+
+|Name|Qty|
+|:---------------|:---:|
+|M3x8 screw|15|		
+|M3x12 screw|7|		
+|M3x20 screw|3|		
+|M5x20r screw|8|		
+|M3x4 Torx|9|		
+|M3nN|11|		
+|M3nS|2|		
+|M3nE|3|		
+|[M3x6 hex spacer](/DOCUMENTATION/MECHANICAL%20PARTS/mini-column.pdf)|9|		
+
+**ELECTRICAL PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|[MINI heatbed](https://github.com/prusa3d/Heatbed-Mini-PCB)|1|		
+|[MINI heatbed termistor](/DOCUMENTATION/ELECTRONICS/MK3s-HB-termistor.pdf)|1|		
+|[MINI heatbed cable](/DOCUMENTATION/ELECTRONICS/mini-bed.pdf)|1|		
+|[MINI Y-axis motor](/DOCUMENTATION/ELECTRONICS/mini-motor-kit.pdf)|1|		
+|[MINI display](/DOCUMENTATION/ELECTRONICS/mini-display-ldopr28lcd-a003.zip)  [(driver DS)](/DOCUMENTATION/ELECTRONICS/mini-lcd-driver-st7789v.pdf)  [(lcd module DS)](/DOCUMENTATION/ELECTRONICS/mini-lcd-module-fw024tft-v14.pdf)|1|		
+|[MINI lcd cable](/DOCUMENTATION/ELECTRONICS/mini-lcd-cable.pdf)|1|		
+
+**STANDARD PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|LM8UU linear bearing|3|		
+|Pulley Bearing Idler 623h|1|		
+|Pulley Motor GT2-16|1|		
+|Y-axis belt 496 mm|1|		 
+
+
+**CUSTOM PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|[MINI aluminium extrusion 262mm](/DOCUMENTATION/MECHANICAL%20PARTS/mini-y-extrusion.pdf)|2|	
+|[MINI Y smooth rod](/DOCUMENTATION/MECHANICAL%20PARTS/mini-y-rod.pdf)|2|		
+|[MINI Y carriage](/DOCUMENTATION/MECHANICAL%20PARTS/mini-y-carriage.pdf)|1|		
+|[MINI heatbed textile sleeve](/DOCUMENTATION/MECHANICAL%20PARTS/mini-oplet-5x350.pdf)|1|		
+|[U bolt](/DOCUMENTATION/MECHANICAL%20PARTS/u-bolt.pdf)|3|		
+|[MINI steel sheet](/DOCUMENTATION/MECHANICAL%20PARTS/mini-steelsheet-std.pdf)|1|		
+|[MINI foam pad](/DOCUMENTATION/MECHANICAL%20PARTS/mini-foam-pad.pdf)|5|		
+

BOM/Z-AXIS.md

@@ -0,0 +1,39 @@
+![z-axis](img/z-axis.png?raw=true "z-axis")
+
+**PRINTED PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|MINI-z-bottom|1|
+|MINI-z-bottom-cover|1|
+|MINI-z-bottom-cable-cover|1|
+|MINI-z-top|1|
+
+**FASTENERS**
+
+|Name|Qty|
+|:---------------|:---:|
+|M3x8 screw|4|
+|M3x12 screw|4|
+|M3x20 screw|10|
+|M3x40 screw|1|
+|M5x16r screw|4|
+|M3n|4|
+|M3nS|10|
+
+**ELECTRICAL PARTS**
+
+|Name|Qty|
+|:---------------|:---:|
+|[MINI Buddy board v1.0.x](https://github.com/prusa3d/Buddy-board-MINI-PCB)|1|
+|[MINI power switch](/DOCUMENTATION/ELECTRONICS/mini-power-switch.pdf)|1|
+|[MINI display cable](/DOCUMENTATION/ELECTRONICS/mini-lcd-cable.pdf)|1|
+|[MINI Z-axis motor](/DOCUMENTATION/ELECTRONICS/mini-motor-kit.pdf)|1|
+
+**CUSTOM PARTS**		
+
+|Name|Qty|
+|:---------------|:---:|
+|[MINI Z plate bottom](/DOCUMENTATION/MECHANICAL%20PARTS/mini-z-plate-bottom.pdf)|1|
+|[MINI aluminium extrusion 289mm](/DOCUMENTATION/MECHANICAL%20PARTS/mini-z-extrusion.pdf)|1|
+|[MINI Z smooth rod](/DOCUMENTATION/MECHANICAL%20PARTS/mini-z-rod.pdf)|2|

DOCUMENTATION/.gitkeep

@@ -0,0 +1 @@
+

DOCUMENTATION/PRINT SETTINGS/recommended print settings for Original Prusa MINI.md

@@ -0,0 +1,144 @@
+### Recommended print settings :
+
+Printer : **Original Prusa MINI**
+
+Print settings : **0.20mm Quality**
+
+Material : **Prusament PETG**
+
+Nozzle : **0.4 mm**
+
+Layer : **0.2 mm**
+
+Support : **no supports**
+
+### **Edit :**
+
+Infill pattern : **grid**
+
+Infill density : **10 %**
+
+<br/>
+
+### **Parts :**
+
+
+- MINI-z-bottom-cover
+
+- MINI-z-bottom-cable-cover
+
+- MINI-fan-spacer
+
+- MINI-fan-spacer-clip
+
+- MINI-fsenzor-box
+
+- MINI-fsenzor-cover
+
+- MINI-fsenzor-lever
+
+- MINI-minda-holder
+
+- MINI-inspection-door
+
+- MINI-knob
+
+- MINI-heatbed-cable-cover-bottom
+
+- MINI-heatbed-cable-cover-top
+
+- MINI-rail-spoolholder
+
+- MINI-base-spoolholder
+
+
+
+
+
+
+-------------------------------------------------------------------------------------------------------------------
+
+### Recommended print settings :
+
+Printer : **Original Prusa MINI**
+
+Print settings : **0.20mm Quality**
+
+Material : **Prusament PETG**
+
+Nozzle : **0.4 mm**
+
+Layer : **0.2 mm**
+
+Support : **no supports**
+
+### **Edit :**
+
+Infill pattern : **grid**
+
+Infill density : **20 %**
+
+<br/>
+
+### **Parts :**
+
+
+- MINI-x-carriage
+
+- MINI-x-end
+
+- MINI-y-belt-holder
+
+- MINI-y-idler
+
+- MINI-y-plate-rear
+
+- MINI-y-plate-front
+
+- MINI-z-carriage-rear
+
+- MINI-z-carriage-front
+
+- MINI-z-bottom
+
+- MINI-z-top
+
+- MINI-extruder-rear
+
+- MINI-extruder-front
+
+- MINI-extruder-idler
+
+- MINI-display-box
+
+
+
+
+
+
+-----------------------------------------------------------------------------------------------
+
+Please keep in mind thermal expansion of used material especially in XY plane. Printed parts are tempered by heatbed - then cooled down to room temperature so parts shrink.
+
+```
+Apply this linear relation: delta D´ = D * gamma * delta T
+	delta D´	= final dimension difference
+	D		= original dimension
+	gamma		= coefficient of thermal expansion for used material
+	delta T		= printed part temperature difference between current temperature 
+			  while it's printed and ambient temperature in use
+
+Example:
+material	PETG: 	HB temp. = 90 [°C]
+			amb. temp. = 25 [°C] 
+delta T		90 - 25 = 65 [°C]
+gamma		0.000068 [m/m*°C] [1/°C] (doesn't matter if Celsius or Kelvin)
+D		100 [mm]
+Use basic unit!
+
+delta D´ = D * gamma * delta T
+delta D´ = 0.1 * 0.000068 * 65
+delta D´ = 0.000442 [m] = 0.442 [mm]
+```
+
+Linear thermal expansion works for each layer if there's any delta T but every layer has different delta T if the heatbed temperates printed part - the higher layer position the smaller delta T. It's due to cooling printed part by ambient air and air flow from print fan.

DOCUMENTATION/PRINT SETTINGS/recommended print settings for Original Prusa i3 MK3S.md

@@ -0,0 +1,144 @@
+### Recommended print settings :
+
+Printer : **Original Prusa i3 MK3S**
+
+Print settings : **0.20mm Quality**
+
+Material : **Prusament PETG**
+
+Nozzle : **0.4 mm**
+
+Layer : **0.2 mm**
+
+Support : **no supports**
+
+### **Edit :**
+
+Infill pattern : **grid**
+
+Infill density : **10 %**
+
+<br/>
+
+### **Parts :**
+
+
+- MINI-z-bottom-cover
+
+- MINI-z-bottom-cable-cover
+
+- MINI-fan-spacer
+
+- MINI-fan-spacer-clip
+
+- MINI-fsenzor-box
+
+- MINI-fsenzor-cover
+
+- MINI-fsenzor-lever
+
+- MINI-minda-holder
+
+- MINI-inspection-door
+
+- MINI-knob
+
+- MINI-heatbed-cable-cover-bottom
+
+- MINI-heatbed-cable-cover-top
+
+- MINI-rail-spoolholder
+
+- MINI-base-spoolholder
+
+
+
+
+
+
+-------------------------------------------------------------------------------------------------------------------
+
+### Recommended print settings :
+
+Printer : **Original Prusa i3 MK3S**
+
+Print settings : **0.20mm Quality**
+
+Material : **Prusament PETG**
+
+Nozzle : **0.4 mm**
+
+Layer : **0.2 mm**
+
+Support : **no supports**
+
+### **Edit :**
+
+Infill pattern : **grid**
+
+Infill density : **20 %**
+
+<br/>
+
+### **Parts :**
+
+
+- MINI-x-carriage
+
+- MINI-x-end
+
+- MINI-y-belt-holder
+
+- MINI-y-idler
+
+- MINI-y-plate-rear
+
+- MINI-y-plate-front
+
+- MINI-z-carriage-rear
+
+- MINI-z-carriage-front
+
+- MINI-z-bottom
+
+- MINI-z-top
+
+- MINI-extruder-rear
+
+- MINI-extruder-front
+
+- MINI-extruder-idler
+
+- MINI-display-box
+
+
+
+
+
+
+-----------------------------------------------------------------------------------------------
+
+Please keep in mind thermal expansion of used material especially in XY plane. Printed parts are tempered by heatbed - then cooled down to room temperature so parts shrink.
+
+```
+Apply this linear relation: delta D´ = D * gamma * delta T
+	delta D´	= final dimension difference
+	D		= original dimension
+	gamma		= coefficient of thermal expansion for used material
+	delta T		= printed part temperature difference between current temperature 
+			  while it's printed and ambient temperature in use
+
+Example:
+material	PETG: 	HB temp. = 90 [°C]
+			amb. temp. = 25 [°C] 
+delta T		90 - 25 = 65 [°C]
+gamma		0.000068 [m/m*°C] [1/°C] (doesn't matter if Celsius or Kelvin)
+D		100 [mm]
+Use basic unit!
+
+delta D´ = D * gamma * delta T
+delta D´ = 0.1 * 0.000068 * 65
+delta D´ = 0.000442 [m] = 0.442 [mm]
+```
+
+Linear thermal expansion works for each layer if there's any delta T but every layer has different delta T if the heatbed temperates printed part - the higher layer position the smaller delta T. It's due to cooling printed part by ambient air and air flow from print fan.