weeheavy/Original-Prusa-MINI
1
0
Fork 0
mirror of https://github.com/prusa3d/Original-Prusa-MINI.git synced 2024-09-11 17:55:30 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions
Original-Prusa-MINI/STEP/PRINTED PARTS
History
Exact
akukan 03b7aedde3 Adjustments to avoid print problems 
Y-BELT_HOLDER : Length increased by 0.5 mm on both sides near channel for the wrench - thin wall elimination

Y-IDLER : Chamfer near cut for the rib - thin wall elimination
2020-08-21 16:20:45 +02:00
..
MINI-base-spoolholder.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-display-box.stp larger hole for encoder 2020-01-23 18:23:36 +01:00
MINI-extruder-front.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-extruder-idler.stp selective infill adjusted 2020-04-27 13:25:40 +02:00
MINI-extruder-rear.stp larger hole for PTFE connector 2020-04-27 13:28:10 +02:00
MINI-fan-spacer-clip.stp new mounting method of the extruder cables 2020-01-23 18:18:11 +01:00
MINI-fan-spacer.stp new mounting method of the extruder cables 2020-01-23 18:18:11 +01:00
MINI-fsenzor-box.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-fsenzor-cover.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-fsenzor-lever.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-heatbed-cable-cover-bottom.stp Selective infill adjustment , heatbed thermistor cable space adjusted 2020-03-03 13:47:23 +01:00
MINI-heatbed-cable-cover-top.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-inspection-door.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-knob.stp increased height of the knob, deeper hole for encoder shaft 2020-01-23 18:22:04 +01:00
MINI-minda-holder.stp more robust part, held in place by 2 screws 2020-01-23 18:19:06 +01:00
MINI-rail-spoolholder.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-x-carriage.stp belt slots adjusted 2020-01-23 18:21:16 +01:00
MINI-x-end.stp opening holes for screws holding part on the smooth rods 2020-01-23 18:21:34 +01:00
MINI-y-belt-holder.stp Adjustments to avoid print problems 2020-08-21 16:20:45 +02:00
MINI-y-idler.stp Adjustments to avoid print problems 2020-08-21 16:20:45 +02:00
MINI-y-plate-front.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-y-plate-rear.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-z-bottom-cable-cover.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-z-bottom-cover.stp wider protrusion for better cable management 2020-01-23 18:23:20 +01:00
MINI-z-bottom.stp hole adjustments, selective infill 2020-04-27 13:29:36 +02:00
MINI-z-carriage-front.stp Selective infill, smooth rods seating adjusted 2020-04-27 13:30:53 +02:00
MINI-z-carriage-rear.stp Initial commit 2019-12-11 13:50:56 +01:00
MINI-z-top.stp Initial commit 2019-12-11 13:50:56 +01:00