adaptive-lighting/docs/automation-examples.md

icon
lucide/bot

Automation Examples

Real-world automation examples showing how to integrate Adaptive Lighting with your Home Assistant setup.

Replace every entity ID below with the IDs from your Home Assistant instance. Fresh Adaptive Lighting profiles use child IDs such as switch.adaptive_lighting_living_room_sleep_mode; profiles created before the device-based entity change may retain older IDs.

Blocks that begin with - alias are entries for automations.yaml. Blocks with a top-level script: or adaptive_lighting: key are complete configuration.yaml examples. If your configuration uses script: !include scripts.yaml, omit that outer key and place its contents in scripts.yaml.

change_switch_settings updates a profile while its main switch is off, but lights are adapted only while that switch is on. It preserves manual-control flags, so manually controlled lights remain paused.

Automatically reset manual control after one hour.

Use the built-in timeout so every new manual change renews a single timer for that light:

adaptive_lighting:
  - name: "Living Room"
    lights:
      - light.living_room
    autoreset_control_seconds: 3600

This is a top-level configuration.yaml example. The timer clears manual control and immediately readapts a light when both it and the Adaptive Lighting switch are on.

Toggle multiple Adaptive Lighting switches to "sleep mode" using an input_boolean.sleep_mode.

- alias: "Adaptive lighting: toggle 'sleep mode'"
  trigger:
    - platform: state
      entity_id: input_boolean.sleep_mode
    - platform: homeassistant
      event: start  # apply the helper's restored state
  variables:
    sleep_mode: "{{ states('input_boolean.sleep_mode') }}"
  conditions:
    - condition: template
      value_template: "{{ sleep_mode in ['on', 'off'] }}"
  actions:
    - action: "switch.turn_{{ sleep_mode }}"
      target:
        entity_id:
          - switch.adaptive_lighting_living_room_sleep_mode
          - switch.adaptive_lighting_bedroom_sleep_mode

Set sunrise and sunset from an alarm.

Call this script from your alarm automation. It sets one Adaptive Lighting profile's sunrise to the current time and its sunset to 12 hours later on the local clock.

script:
  set_adaptive_lighting_alarm_times:
    alias: "Adaptive lighting: set times from alarm"
    variables:
      alarm_time: '{{ now().strftime("%H:%M:%S") }}'
    sequence:
      - action: adaptive_lighting.change_switch_settings
        data:
          entity_id: switch.adaptive_lighting_alarm_lights
          sunrise_time: "{{ alarm_time }}"
          sunset_time: >
            {{ (strptime(alarm_time, "%H:%M:%S") + timedelta(hours=12))
               .strftime("%H:%M:%S") }}

Use a Schedule helper as a step-based custom lighting profile.

Create a Schedule helper named Adaptive Lighting Profile. Add time blocks with Additional data like this:

brightness_pct: 20
color_temp_kelvin: 2500

Use different values for each block. The automation below applies the active block whenever the schedule state or its attributes change. Setting both brightness limits and both color temperature limits to the same value keeps each block at its setpoint. Outside a block, the configured Adaptive Lighting settings are restored.

- alias: "Adaptive lighting: apply scheduled profile"
  triggers:
    - trigger: state
      entity_id: schedule.adaptive_lighting_profile
    - trigger: homeassistant
      event: start
  actions:
    - choose:
        - conditions:
            - condition: state
              entity_id: schedule.adaptive_lighting_profile
              state: "on"
          sequence:
            - action: adaptive_lighting.change_switch_settings
              data:
                entity_id: switch.adaptive_lighting_living_room
                min_brightness: >
                  {{ state_attr('schedule.adaptive_lighting_profile', 'brightness_pct') | int(1) }}
                max_brightness: >
                  {{ state_attr('schedule.adaptive_lighting_profile', 'brightness_pct') | int(1) }}
                min_color_temp: >
                  {{ state_attr('schedule.adaptive_lighting_profile', 'color_temp_kelvin') | int(2000) }}
                max_color_temp: >
                  {{ state_attr('schedule.adaptive_lighting_profile', 'color_temp_kelvin') | int(2000) }}
      default:
        - action: adaptive_lighting.change_switch_settings
          data:
            entity_id: switch.adaptive_lighting_living_room
            use_defaults: configuration
  mode: restart

This creates step changes at block boundaries. It does not interpolate between schedule points. Runtime settings also reset when Home Assistant restarts, so the startup trigger reapplies the active block. The default branch restores every configured setting; restore only the four fields explicitly if other automations also change runtime settings.

Reduce daytime brightness when an illuminance sensor detects strong daylight.

Keep a low configured min_brightness for late night and let an automation lower max_brightness while the room has ample daylight. Use a sensor that is not significantly affected by the controlled lights to avoid a feedback loop.

- alias: "Adaptive lighting: limit brightness in daylight"
  triggers:
    - trigger: numeric_state
      entity_id: sensor.living_room_illuminance
      above: 300
    - trigger: numeric_state
      entity_id: sensor.living_room_illuminance
      below: 200
    - trigger: homeassistant
      event: start
      id: startup
  actions:
    - if:
        - condition: trigger
          id: startup
      then:
        - wait_template: >
            {{ is_number(states('sensor.living_room_illuminance')) }}
          timeout: "00:05:00"
          continue_on_timeout: false
    - choose:
        - conditions:
            - condition: numeric_state
              entity_id: sensor.living_room_illuminance
              above: 300
          sequence:
            - action: adaptive_lighting.change_switch_settings
              data:
                entity_id: switch.adaptive_lighting_living_room
                max_brightness: 30
        - conditions:
            - condition: numeric_state
              entity_id: sensor.living_room_illuminance
              below: 200
          sequence:
            - action: adaptive_lighting.change_switch_settings
              data:
                entity_id: switch.adaptive_lighting_living_room
                max_brightness: 100
  mode: restart

The separate 200 and 300 lux thresholds add hysteresis. After a restart, the automation waits for a numeric sensor state before evaluating it. If the initial value is between the thresholds, Adaptive Lighting keeps its configured maximum. Replace 30 and 100 with your desired daytime limit and normal maximum.

min_brightness and max_brightness are the solar-midnight and daytime endpoints of the brightness curve. Setting min_brightness higher than max_brightness is supported and creates an inverted curve that is brighter at night and dimmer during the day. If you only want a daytime limit, keep the reduced maximum at or above the configured minimum.

Turn on Hue-controlled lights with the current Adaptive Lighting values.

For a Hue button exposed to Home Assistant, call this script from the button automation. It turns on the listed lights directly with the current Adaptive Lighting brightness and color.

script:
  living_room_adaptive_lighting:
    alias: "Living room: adaptive lighting"
    sequence:
      - action: adaptive_lighting.apply
        data:
          entity_id: switch.adaptive_lighting_living_room
          lights:
            - light.living_room_ceiling
            - light.living_room_table
          turn_on_lights: true
          transition: 0

This requires Home Assistant to receive the button event. The one-shot apply call works while the main Adaptive Lighting switch is off, turns on the listed lights, and applies values even if a light is marked as manually controlled. It leaves the profile switch and manual-control state unchanged.

Adaptive Lighting does not update scenes stored on the Hue Bridge, so scenes activated only inside Hue cannot use this script and retain Hue's operation when Home Assistant is unavailable.

Use a fixed RGB stage before sleep mode.

This script starts sleep mode with a fixed dim red color, waits 30 minutes, and then restores the configured Adaptive Lighting settings. The main profile switch and the light must already be on.

script:
  adaptive_lighting_bedtime:
    alias: "Adaptive lighting: bedtime"
    mode: restart
    sequence:
      - action: adaptive_lighting.change_switch_settings
        data:
          entity_id: switch.adaptive_lighting_bedroom
          sleep_rgb_or_color_temp: rgb_color
          sleep_rgb_color: [255, 56, 0]
          sleep_brightness: 20
      - action: switch.turn_on
        target:
          entity_id: switch.adaptive_lighting_bedroom_sleep_mode
      - delay: "00:30:00"
      - action: adaptive_lighting.change_switch_settings
        data:
          entity_id: switch.adaptive_lighting_bedroom
          use_defaults: configuration

The light must support RGB color. The first stage uses a fixed brightness rather than following the normal brightness curve. When sleep mode changes from off to on, the default reset_manual_control_on_sleep_mode_change: true returns manually controlled lights to Adaptive Lighting control so they receive the stage. If you disable that option, manually controlled lights remain paused. Restoring configuration defaults resets every runtime setting on this Adaptive Lighting switch, so restore only the sleep fields explicitly if other automations also change runtime settings.

Stopping this script or reloading scripts during the delay prevents the final action, leaving the runtime overrides active. To recover, call adaptive_lighting.change_switch_settings for the profile with use_defaults: configuration. A Home Assistant restart reloads the configured settings.

Run a fixed virtual day across midnight.

Fixed virtual sunrise and sunset times can cross midnight. This configuration ramps an indoor garden from its minimum at 16:00 to its maximum at 22:00, then back to its minimum at 04:00.

adaptive_lighting:
  - name: "Indoor Garden"
    lights:
      - light.indoor_garden
    sunrise_time: "16:00:00"
    sunset_time: "04:00:00"
    min_brightness: 10
    max_brightness: 100
    brightness_mode: linear
    brightness_mode_time_dark: 0
    brightness_mode_time_light: 21600  # 6 hours

Adaptive Lighting changes brightness and color while a light is on; it does not manage the light's power schedule. This separate automation turns the example light on and off:

- alias: "Indoor garden: power schedule"
  triggers:
    - trigger: time
      at: "16:00:00"
      id: turn_on
    - trigger: time
      at: "04:00:00"
      id: turn_off
    - trigger: homeassistant
      event: start
      id: startup
  actions:
    - choose:
        - conditions:
            - condition: trigger
              id: turn_on
          sequence:
            - action: light.turn_on
              target:
                entity_id: light.indoor_garden
        - conditions:
            - condition: trigger
              id: startup
            - condition: time
              after: "16:00:00"
              before: "04:00:00"
          sequence:
            - action: light.turn_on
              target:
                entity_id: light.indoor_garden
      default:
        - action: light.turn_off
          target:
            entity_id: light.indoor_garden

Use min_sunrise_time, max_sunrise_time, min_sunset_time, or max_sunset_time instead when you want to constrain astronomical sunrise or sunset to an earliest or latest time rather than replace it.

Tip

Have a useful automation? Share your automation examples by opening an issue or submitting a pull request to the README.