Update install page

docs/locales/zh_CN/LC_MESSAGES/install.po

@@ -21,29 +21,29 @@ msgstr ""
 
 #: ../../install.rst:2
 msgid "Installing Pelican"
-msgstr ""
+msgstr "安装Pelican"
 
 #: ../../install.rst:4
 msgid ""
 "Pelican currently runs best on 3.7+; earlier versions of Python are not "
 "supported."
-msgstr ""
+msgstr "Pelican需要运行在3.7版本以上的Python，低版本的Python是不支持的。"
 
 #: ../../install.rst:6
 msgid ""
 "You can install Pelican via several different methods. The simplest is "
 "via Pip_::"
-msgstr ""
+msgstr "有几种不同的方法可以安装Pelican，最简单的就是通过 Pip_："
 
 #: ../../install.rst:10
 msgid "Or, if you plan on using Markdown::"
-msgstr ""
+msgstr "如果您需要使用Markdown，请使用下面的命令安装："
 
 #: ../../install.rst:14
 msgid ""
 "(Keep in mind that some operating systems will require you to prefix the "
 "above command with ``sudo`` in order to install Pelican system-wide.)"
-msgstr ""
+msgstr "（在某些操作系统中，需要在命令前加 ``sudo`` 才能在整个系统上安装Pelican）"
 
 #: ../../install.rst:17
 msgid ""
@@ -52,7 +52,8 @@ msgid ""
 "installing Pelican. Assuming you have virtualenv_ installed, you can then"
 " open a new terminal session and create a new virtual environment for "
 "Pelican::"
-msgstr ""
+msgstr "尽管上面是最简单的安装方法，但我们推荐使用虚拟环境 virtualenv_ 完成Pelican的安装。"
+"当您安装好了 virtualenv_ 后，打开一个新的命令行来为Pelican创建一个虚拟环境："
 
 #: ../../install.rst:26
 msgid ""
@@ -60,123 +61,130 @@ msgid ""
 "be installed via ``python -m pip install pelican`` as noted above. "
 "Alternatively, if you have the project source, you can install Pelican "
 "using the distutils method::"
-msgstr ""
+msgstr "当创建并激活虚拟环境后，使用之前提到过的命令 ``python -m pip install pelican`` 就可以安装Pelican了。"
+"或者，如果您想要从源码安装，可以通过distutils的安装脚本完成："
 
 #: ../../install.rst:33
 msgid ""
 "If you have Git installed and prefer to install the latest bleeding-edge "
 "version of Pelican rather than a stable release, use the following "
 "command::"
-msgstr ""
+msgstr "如果安装过Git，并且您希望安装Pelican的最最新版本（而不是稳定版），"
+"请使用下面的命令："
 
 #: ../../install.rst:38
 msgid ""
 "Once Pelican is installed, you can run ``pelican --help`` to see basic "
 "usage options. For more detail, refer to the :doc:`Publish<publish>` "
 "section."
-msgstr ""
+msgstr "当您安装了Pelican，可以执行 ``pelican --help`` 命令来查看一些基本的用法。"
+"从文档的 :doc:`Publish<publish>` 章节可以了解更多信息。"
 
 #: ../../install.rst:42
 msgid "Optional packages"
-msgstr ""
+msgstr "可选包"
 
 #: ../../install.rst:44
 msgid ""
 "If you plan on using `Markdown <https://pypi.org/project/Markdown/>`_ as "
 "a markup format, you can install Pelican with Markdown support::"
-msgstr ""
+msgstr "如您希望使用 `Markdown <https://pypi.org/project/Markdown/>`_ 来写作"
+"执行下面的命令来安装Markdown支持："
 
 #: ../../install.rst:49
 msgid ""
 "Typographical enhancements can be enabled in your settings file, but "
 "first the requisite `Typogrify <https://pypi.org/project/typogrify/>`_ "
 "library must be installed::"
-msgstr ""
+msgstr "Pelican还支持排版增强，若您需要使用，请先安装 `Typogrify <https://pypi.org/project/typogrify/>`_ 库，"
+"稍后您可以在设置文件中启用它。"
 
 #: ../../install.rst:56
 msgid "Dependencies"
-msgstr ""
+msgstr "依赖"
 
 #: ../../install.rst:58
 msgid ""
 "When Pelican is installed, the following dependent Python packages should"
 " be automatically installed without any action on your part:"
-msgstr ""
+msgstr "当Pelican安装完成后，下面的所有Python依赖应该都会自动安装，无需另外做任何操作："
 
 #: ../../install.rst:61
 msgid ""
 "`feedgenerator <https://pypi.org/project/feedgenerator/>`_, to generate "
 "the Atom feeds"
-msgstr ""
+msgstr "`feedgenerator <https://pypi.org/project/feedgenerator/>`_，用于生成Atom feeds"
 
 #: ../../install.rst:63
 msgid "`jinja2 <https://pypi.org/project/Jinja2/>`_, for templating support"
-msgstr ""
+msgstr "`jinja2 <https://pypi.org/project/Jinja2/>`_，用于模板"
 
 #: ../../install.rst:64
 msgid "`pygments <https://pypi.org/project/Pygments/>`_, for syntax highlighting"
-msgstr ""
+msgstr "`pygments <https://pypi.org/project/Pygments/>`_，用于语法高亮"
 
 #: ../../install.rst:65
 msgid ""
 "`docutils <https://pypi.org/project/docutils/>`_, for supporting "
 "reStructuredText as an input format"
-msgstr ""
+msgstr "`docutils <https://pypi.org/project/docutils/>`_，用于reStructuredText格式"
 
 #: ../../install.rst:67
 msgid "`pytz <https://pypi.org/project/pytz/>`_, for timezone definitions"
-msgstr ""
+msgstr "`pytz <https://pypi.org/project/pytz/>`_，用于定义时区"
 
 #: ../../install.rst:68
 msgid ""
 "`blinker <https://pypi.org/project/blinker/>`_, an object-to-object and "
 "broadcast signaling system"
-msgstr ""
+msgstr "`blinker <https://pypi.org/project/blinker/>`_，对象-对象的信号广播系统"
 
 #: ../../install.rst:70
 msgid ""
 "`unidecode <https://pypi.org/project/Unidecode/>`_, for ASCII "
 "transliterations of Unicode text utilities"
-msgstr ""
+msgstr "`unidecode <https://pypi.org/project/Unidecode/>`_，用于将Unicode文本转为ASCII字符的音译"
 
 #: ../../install.rst:73
 msgid ""
 "`MarkupSafe <https://pypi.org/project/MarkupSafe/>`_, for a markup-safe "
 "string implementation"
-msgstr ""
+msgstr "`MarkupSafe <https://pypi.org/project/MarkupSafe/>`_，用于转义字符的安全处理"
 
 #: ../../install.rst:75
 msgid ""
 "`python-dateutil <https://pypi.org/project/python-dateutil/>`_, to read "
 "the date metadata"
-msgstr ""
+msgstr "`python-dateutil <https://pypi.org/project/python-dateutil/>`_，用于读取日期相关的元数据"
 
 #: ../../install.rst:79
 msgid "Upgrading"
-msgstr ""
+msgstr "更新升级"
 
 #: ../../install.rst:81
 msgid ""
 "If you installed a stable Pelican release via Pip_ and wish to upgrade to"
 " the latest stable release, you can do so by adding ``--upgrade``::"
-msgstr ""
+msgstr "对于通过 Pip_ 安装的稳定版本的Pelican，可以通过在安装命令中加 ``--upgrade`` 来升级到最新版："
 
 #: ../../install.rst:86
 msgid ""
 "If you installed Pelican via distutils or the bleeding-edge method, "
 "simply perform the same step to install the most recent version."
-msgstr ""
+msgstr "对于通过distutils安装的或是通过Git安装的最最新版的Pelican"
+"再做一遍和安装时同样的步骤即可。"
 
 #: ../../install.rst:90
 msgid "Kickstart your site"
-msgstr ""
+msgstr "启动网站"
 
 #: ../../install.rst:92
 msgid ""
 "Once Pelican has been installed, you can create a skeleton project via "
 "the ``pelican-quickstart`` command, which begins by asking some questions"
 " about your site::"
-msgstr ""
+msgstr "Pelican安装完成后，通过 ``pelican-quickstart`` 命令创建项目的整体框架"
+"执行这个命令后，您需要输入一些站点相关的信息："
 
 #: ../../install.rst:98
 msgid ""
@@ -187,7 +195,9 @@ msgid ""
 "Otherwise, the default is the current working directory. To set the new "
 "project path on initial invocation, use: ``pelican-quickstart --path "
 "/your/desired/directory``"
-msgstr ""
+msgstr "如果是在虚拟环境中执行 ``pelican-quickstart`` ，系统会自动在 ``$VIRTUAL_ENV/.project`` 目录中查找这个命令"
+"若这个这个命令存在并且路径是正确的，一个新的Pelican项目就会在目标位置创建。"
+"否则，会默认在当前的工作目录下创建这个项目。若要在初始化时指定项目路径，请使用 ``pelican-quickstart --path /your/desired/directory``"
 
 #: ../../install.rst:105
 msgid ""
@@ -195,11 +205,13 @@ msgid ""
 " the following hierarchy (except for *pages* — shown in parentheses below"
 " — which you can optionally add yourself if you plan to create non-"
 "chronological content)::"
-msgstr ""
+msgstr "当您回答完所有问题后，项目就会创建。"
+"项目中会包含下述的一些层级结构（除了用括号括起来的 *pages*）"
+"如果有一些内容不需要按时间排序，您可以将它们放在（pages）所在的位置："
 
 #: ../../install.rst:119
 msgid ""
 "The next step is to begin to adding content to the *content* folder that "
 "has been created for you."
-msgstr ""
+msgstr "下一步就可以开始往 *content* 目录中添加自己创建的内容了。"