Fix TypeError when 'light.turn_off' is called with a string transition (#1589)

* Fix TypeError when 'light.turn_off' is called with a string transition

`EVENT_CALL_SERVICE` carries the *raw* service data, not the data
`light.turn_off`'s schema produced for the service handler, so its
`vol.Coerce(float)` never reaches `AdaptiveLightingManager`. A caller
passing `transition: "2"` — a template rendering to a string, or any
JSON payload where the value was quoted — therefore stores a `str` in
`turn_off_event`.

Both places that derive a delay from it compare it against an int:

    delay = max(transition or 0, TURNING_OFF_DELAY)  # during turn-off
    delay = max(transition, TURNING_OFF_DELAY)       # just_turned_off

which raises `TypeError: '>' not supported between instances of 'int'
and 'str'`. Because `just_turned_off` runs inside the state-change
listener task, the exception is swallowed: it surfaces only as
"Error doing job: Task exception was never retrieved (task: None)",
while the light quietly stops being adapted after that turn-off.

Read the transition through a helper that coerces to float. Schema
validation runs before the event fires, so whatever reaches the helper
is coercible.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Normalize turn-off transitions with the light service validator

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: Bas Nijholt <bas@nijho.lt>

.devcontainer.json

@@ -1,7 +1,7 @@
 {
     "name": "basnijholt/adaptive_lighting",
-    "image": "mcr.microsoft.com/vscode/devcontainers/python:0-3.11-bullseye",
-    "postCreateCommand": "scripts/setup",
+    "image": "mcr.microsoft.com/devcontainers/python:3-3.13",
+    "postCreateCommand": "./scripts/setup-devcontainer && . .venv/bin/activate",
     "forwardPorts": [
         8123
     ],
@@ -36,7 +36,5 @@
         }
     },
     "remoteUser": "vscode",
-    "features": {
-        "ghcr.io/devcontainers/features/rust:1": {}
-    }
+    "features": {}
 }

.dockerignore

@@ -0,0 +1,28 @@
+# The Home Assistant core checkout. tests/README.md has you clone it to ./core,
+# but the Dockerfile clones its own copy to /core and links /app/core to it.
+# Without this entry `COPY . /app/` ships ~300MB into every build and leaves
+# /app/core as a real directory, so `ln -s /core /app/core` links *inside* it
+# rather than creating the intended symlink.
+core/
+
+# Local virtualenvs
+.venv/
+venv/
+env/
+ENV/
+
+# Not used by the build
+.git/
+.vscode/
+.idea/
+
+# Caches and test output
+__pycache__/
+*.py[cod]
+.pytest_cache/
+.ruff_cache/
+.mypy_cache/
+htmlcov/
+.coverage
+.coverage.*
+coverage.xml

.github/ISSUE_TEMPLATE/bug-report.md

@@ -18,7 +18,7 @@ If you need help with using or configuring Adaptive Lighting, please [open a Q&A
 Please confirm that you have completed the following steps:
 
 - [ ] I have updated to the [latest Adaptive Lighting version](https://github.com/basnijholt/adaptive-lighting/releases) available in [HACS](https://hacs.xyz/).
-- [ ] I have reviewed the [Troubleshooting Section](https://github.com/basnijholt/adaptive-lighting#troubleshooting) in the [README](https://github.com/basnijholt/adaptive-lighting#readme).
+- [ ] I have reviewed the [Troubleshooting Section](https://github.com/basnijholt/adaptive-lighting#sos-troubleshooting) in the [README](https://github.com/basnijholt/adaptive-lighting#readme).
 - [ ] (If using Zigbee2MQTT) I have read the [Zigbee2MQTT troubleshooting guide](https://github.com/basnijholt/adaptive-lighting#zigbee2mqtt) in the [README](https://github.com/basnijholt/adaptive-lighting#readme).
 - [ ] I have checked the [V2 Roadmap](https://github.com/basnijholt/adaptive-lighting/discussions/291) and [open issues](https://github.com/basnijholt/adaptive-lighting/issues) to ensure my issue isn't a duplicate.
 

.github/renovate.json

@@ -0,0 +1,38 @@
+{
+    "$schema": "https://docs.renovatebot.com/renovate-schema.json",
+    "rebaseWhen": "behind-base-branch",
+    "dependencyDashboard": true,
+    "labels": [
+        "dependencies",
+        "no-stale"
+    ],
+    "commitMessagePrefix": "⬆️",
+    "commitMessageTopic": "{{depName}}",
+    "prBodyDefinitions": {
+        "Release": "yes"
+    },
+    "packageRules": [
+        {
+            "matchManagers": [
+                "github-actions"
+            ],
+            "addLabels": [
+                "github_actions"
+            ],
+            "rangeStrategy": "pin"
+        },
+        {
+            "matchManagers": [
+                "github-actions"
+            ],
+            "matchUpdateTypes": [
+                "minor",
+                "patch"
+            ],
+            "automerge": true
+        }
+    ],
+    "extends": [
+        "config:recommended"
+    ]
+}

.github/update-services.py

@@ -1,4 +1,5 @@
 """Creates a services.yaml file with the latest docs."""
+
 import sys
 from pathlib import Path
 
@@ -6,7 +7,7 @@ import yaml
 
 sys.path.append(str(Path(__file__).parent.parent))
 
-from custom_components.adaptive_lighting import const  # noqa: E402
+from custom_components.adaptive_lighting import const
 
 services_filename = Path("custom_components") / "adaptive_lighting" / "services.yaml"
 with open(services_filename) as f:  # noqa: PTH123

.github/update-strings.py

@@ -1,6 +1,8 @@
 """Update strings.json and en.json from const.py."""
+
 import json
 import sys
+from copy import deepcopy
 from pathlib import Path
 
 import homeassistant.helpers.config_validation as cv
@@ -8,26 +10,63 @@ import yaml
 
 sys.path.append(str(Path(__file__).parent.parent))
 
-from custom_components.adaptive_lighting import const  # noqa: E402
+from custom_components.adaptive_lighting import const
 
 folder = Path("custom_components") / "adaptive_lighting"
 strings_fname = folder / "strings.json"
 en_fname = folder / "translations" / "en.json"
+translation_fnames = (folder / "translations").glob("*.json")
 with strings_fname.open() as f:
     strings = json.load(f)
 
+
+def _partition_options(values):
+    """Partition option translations into basic and advanced dictionaries."""
+    basic = {
+        key: values[key]
+        for key, _, _ in const.VALIDATION_TUPLES
+        if key in const.BASIC_OPTIONS and key in values
+    }
+    advanced = {
+        key: values[key]
+        for key, _, _ in const.VALIDATION_TUPLES
+        if key not in const.BASIC_OPTIONS and key in values
+    }
+    return basic, advanced
+
+
+def _migrate_translation_options(step):
+    """Move translated advanced options under the advanced section."""
+    sections = step.setdefault("sections", {})
+    advanced = sections.setdefault("advanced", {})
+    for key in ("data", "data_description"):
+        values = {**advanced.get(key, {}), **step.get(key, {})}
+        step[key], advanced[key] = _partition_options(values)
+
+
 # Set "options"
 data = {}
 data_description = {}
 for k, _, typ in const.VALIDATION_TUPLES:
     desc = const.DOCS[k]
-    if len(desc) > 40 and typ != bool and typ != cv.entity_ids:
+    if len(desc) > 40 and typ not in (bool, cv.entity_ids):
         data[k] = k
         data_description[k] = desc
     else:
         data[k] = f"{k}: {desc}"
-strings["options"]["step"]["init"]["data"] = data
-strings["options"]["step"]["init"]["data_description"] = data_description
+basic_data, advanced_data = _partition_options(data)
+basic_descriptions, advanced_descriptions = _partition_options(data_description)
+options_step = strings["options"]["step"]["init"]
+options_step["data"] = basic_data
+options_step["data_description"] = basic_descriptions
+options_step["sections"] = {
+    "advanced": {
+        "name": "Advanced settings",
+        "description": "Additional settings for fine-tuning Adaptive Lighting.",
+        "data": advanced_data,
+        "data_description": advanced_descriptions,
+    },
+}
 
 # Set "services"
 services_filename = Path("custom_components") / "adaptive_lighting" / "services.yaml"
@@ -57,10 +96,22 @@ with en_fname.open() as f:
     en = json.load(f)
 
 en["config"]["step"]["user"] = strings["config"]["step"]["user"]
-en["options"]["step"]["init"]["data"] = data
-en["options"]["step"]["init"]["data_description"] = data_description
+en["options"]["step"]["init"] = deepcopy(options_step)
 en["services"] = services_json
 
 with en_fname.open("w") as f:
     json.dump(en, f, indent=2, ensure_ascii=False)
     f.write("\n")
+
+# Keep translated labels and descriptions when moving advanced options into a section.
+for translation_fname in translation_fnames:
+    if translation_fname == en_fname:
+        continue
+    with translation_fname.open() as f:
+        translation = json.load(f)
+    if "options" not in translation:
+        continue
+    _migrate_translation_options(translation["options"]["step"]["init"])
+    with translation_fname.open("w") as f:
+        json.dump(translation, f, indent=2, ensure_ascii=False)
+        f.write("\n")

.github/workflows/deploy-webapp.yml

@@ -1,62 +0,0 @@
-# Simple workflow for deploying WebAssembly app to GitHub Pages
-name: Deploy WebAssembly app to Pages
-
-on:
-  # Runs on pushes targeting the default branch
-  push:
-    branches: ["main"]
-
-  # Allows you to run this workflow manually from the Actions tab
-  workflow_dispatch:
-
-# Sets permissions of the GITHUB_TOKEN to allow deployment to GitHub Pages
-permissions:
-  contents: read
-  pages: write
-  id-token: write
-
-# Allow only one concurrent deployment, skipping runs queued between the run in-progress and latest queued.
-# However, do NOT cancel in-progress runs as we want to allow these production deployments to complete.
-concurrency:
-  group: "pages"
-  cancel-in-progress: false
-
-jobs:
-  # Single deploy job since we're just deploying
-  deploy:
-    environment:
-      name: github-pages
-      url: ${{ steps.deployment.outputs.page_url }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-
-      - name: Set Up Python
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.x
-
-      - name: Install Dependencies
-        run: |
-          pip install -r webapp/requirements.txt
-
-      - name: Build the WebAssembly app
-        run: |
-          set -ex
-          cp custom_components/adaptive_lighting/color_and_brightness.py webapp/color_and_brightness.py
-          sed -i 's/homeassistant.util.color/homeassistant_util_color/g' "webapp/color_and_brightness.py"
-          shinylive export webapp site
-
-      - name: Setup Pages
-        uses: actions/configure-pages@v3
-
-      - name: Upload artifact
-        uses: actions/upload-pages-artifact@v2
-        with:
-          # Upload the 'site' directory, where your app has been built
-          path: "site"
-
-      - name: Deploy to GitHub Pages
-        id: deployment
-        uses: actions/deploy-pages@v2

.github/workflows/docker-build.yml

@@ -1,32 +1,50 @@
-name: docker
+name: Docker
 
 on:
   push:
-    branches:
-      - "main"
+    branches: [main]
+    tags: ['v*']
+  pull_request:
+  workflow_dispatch:
+
+env:
+  REGISTRY: ghcr.io
+  IMAGE_NAME: ${{ github.repository }}
 
 jobs:
-  docker:
+  build:
     runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      packages: write
     strategy:
       matrix:
-        platform:
-          - linux/amd64
-          - linux/arm64
+        platform: [linux/amd64, linux/arm64]
     steps:
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v2
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v2
-      - name: Login to Docker Hub
-        uses: docker/login-action@v2
+      - uses: actions/checkout@v7.0.1
+      - uses: docker/setup-qemu-action@v4.3.0
+      - uses: docker/setup-buildx-action@v4.3.0
+      - uses: docker/login-action@v4.6.0
         with:
-          username: ${{ secrets.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-      - name: Build and push
-        uses: docker/build-push-action@v4
+          registry: ${{ env.REGISTRY }}
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+      - id: meta
+        uses: docker/metadata-action@v6.2.0
         with:
-          # Only push on the master branch
-          push: ${{ github.ref == 'refs/heads/master' }}
+          images: ${{ env.REGISTRY }}/${{ env.IMAGE_NAME }}
+          tags: |
+            type=ref,event=branch
+            type=ref,event=pr
+            type=semver,pattern={{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=raw,value=latest,enable={{is_default_branch}}
+      - uses: docker/build-push-action@v7.3.0
+        with:
+          context: .
           platforms: ${{ matrix.platform }}
-          tags: ${{ secrets.DOCKERHUB_USERNAME }}/adaptive-lighting:latest
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}
+          cache-from: type=gha
+          cache-to: type=gha,mode=max

.github/workflows/docs.yml

@@ -0,0 +1,64 @@
+name: Documentation
+
+on:
+  push:
+    branches: [main]
+  pull_request:
+  workflow_dispatch:
+
+permissions:
+  contents: read
+  pages: write
+  id-token: write
+
+concurrency:
+  group: "pages"
+  cancel-in-progress: false
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v7.0.1
+
+      - name: Set up Python
+        uses: actions/setup-python@v7.0.0
+        with:
+          python-version: '3.14.7'
+
+      - name: Install uv
+        uses: astral-sh/setup-uv@v10.0.1
+
+      - name: Install dependencies
+        run: uv sync --group docs
+
+      - name: Build documentation
+        run: uv run zensical build
+
+      - name: Build webapp (simulator)
+        run: uv run shinylive export webapp webapp-site
+
+      - name: Integrate webapp into docs
+        run: |
+          # Copy webapp into docs site at /simulator/
+          mkdir -p site/simulator
+          cp -r webapp-site/* site/simulator/
+          echo "Webapp integrated at site/simulator/"
+
+      - name: Upload artifact
+        uses: actions/upload-pages-artifact@v5.0.0
+        with:
+          path: ./site
+
+  deploy:
+    if: github.ref == 'refs/heads/main' && github.event_name != 'pull_request'
+    environment:
+      name: github-pages
+      url: ${{ steps.deployment.outputs.page_url }}
+    runs-on: ubuntu-latest
+    needs: build
+    steps:
+      - name: Deploy to GitHub Pages
+        id: deployment
+        uses: actions/deploy-pages@v5.0.1

.github/workflows/hassfest.yaml

@@ -11,5 +11,5 @@ jobs:
   validate_hassfest:
     runs-on: "ubuntu-latest"
     steps:
-      - uses: "actions/checkout@v3.0.2"
+      - uses: "actions/checkout@v7.0.1"
       - uses: home-assistant/actions/hassfest@master

.github/workflows/install_dependencies/action.yml

@@ -14,31 +14,28 @@ runs:
   using: "composite"
   steps:
     - name: Check out code from GitHub
-      uses: actions/checkout@v3
+      uses: actions/checkout@v7.0.1
       with:
         repository: ${{ github.repository }}
-        ref: ${{ github.ref }}
+        ref: ${{ github.sha }}
         persist-credentials: false
         fetch-depth: 0
     - name: Check out code from GitHub
-      uses: actions/checkout@v3
+      uses: actions/checkout@v7.0.1
       with:
         repository: home-assistant/core
         path: core
         ref: ${{ inputs.core-version }}
     - name: Set up Python ${{ inputs.python-version }}
       id: python
-      uses: actions/setup-python@v4.1.0
+      uses: actions/setup-python@v7.0.0
       with:
         python-version: ${{ inputs.python-version }}
+    - name: Set up UV
+      uses: astral-sh/setup-uv@v10.0.1
     - name: Install dependencies
       shell: bash
       run: |
-        echo "::warning::### WARNING! Deprecation warnings muted with option '--use-pep517' please address this at some point in pytest.yaml. ###"
-        pip install -r core/requirements.txt --use-pep517
-        # because they decided to pull codecov the package from PyPI...
-        sed -i '/codecov/d' core/requirements_test.txt
-        pip install -r core/requirements_test.txt --use-pep517
-        pip install -e core/ --use-pep517
-        pip install ulid-transform # this is in Adaptive-lighting's manifest.json
-        pip install $(python test_dependencies.py) --use-pep517
+        uv venv --python ${{ inputs.python-version }}
+        ./scripts/setup-dependencies
+        ./scripts/setup-symlinks

.github/workflows/main-to-master-sync.yml

@@ -11,7 +11,7 @@ jobs:
 
     steps:
     - name: Checkout repository
-      uses: actions/checkout@v2
+      uses: actions/checkout@v7.0.1
       with:
         ref: main
         fetch-depth: 0

.github/workflows/markdown-code-runner.yml

@@ -0,0 +1,48 @@
+name: markdown-code-runner
+
+on:
+  push:
+    branches:
+      - main
+  pull_request:
+
+jobs:
+  markdown-code-runner:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v7.0.1
+        with:
+          repository: ${{ github.event.pull_request.head.repo.full_name || github.repository }}
+          ref: ${{ github.head_ref || github.ref }}
+          fetch-depth: 0
+
+      - name: Set up Python
+        uses: actions/setup-python@v7.0.0
+        with:
+          python-version: "3.14.7"
+
+      - name: Install uv
+        uses: astral-sh/setup-uv@v10.0.1
+
+      - name: Update generated content
+        run: ./scripts/update-generated-content
+
+      - name: Check for changes
+        run: |
+          if [ -n "$(git status --porcelain)" ]; then
+            if [ "${{ github.event_name }}" == "pull_request" ]; then
+              echo "::error::Auto-generated files are not up to date. Please run './scripts/update-generated-content' locally and push the changes."
+              exit 1
+            else
+              echo "Changes detected, committing and pushing..."
+              git add -u .
+              git config --local user.email "github-actions[bot]@users.noreply.github.com"
+              git config --local user.name "github-actions[bot]"
+              git commit -m "Update auto-generated content"
+              git pull --rebase
+              git push
+            fi
+          else
+            echo "No changes detected."
+          fi

.github/workflows/pre-commit.yaml

@@ -9,6 +9,6 @@ jobs:
   pre-commit:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v3
-    - uses: actions/setup-python@v3
-    - uses: pre-commit/action@v3.0.0
+    - uses: actions/checkout@v7.0.1
+    - uses: actions/setup-python@v7.0.0
+    - uses: pre-commit/action@v3.0.1

.github/workflows/pytest.yaml

@@ -8,33 +8,43 @@ on:
 jobs:
   pytest:
     name: Run pytest
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-24.04
     timeout-minutes: 60
     strategy:
       fail-fast: false
       matrix:
         include:
-          - python-version: "3.10"
-            core-version: "2022.11.5"
-          - python-version: "3.10"
-            core-version: "2022.12.9"
-          - python-version: "3.10"
-            core-version: "2023.1.7"
-          - python-version: "3.10"
-            core-version: "2023.2.5"
-          - python-version: "3.10"
-            core-version: "2023.3.6"
-          - python-version: "3.10"
-            core-version: "2023.4.6"
-          - python-version: "3.10"
-            core-version: "2023.5.2"
-          - python-version: "3.11"
-            core-version: "2023.6.1"
-          - python-version: "3.11"
-            core-version: "dev"
+          - core-version: "2025.9.4"
+            python-version: "3.13"
+          - core-version: "2025.10.4"
+            python-version: "3.13"
+          - core-version: "2025.11.3"
+            python-version: "3.13"
+          - core-version: "2025.12.5"
+            python-version: "3.13"
+          - core-version: "2026.1.3"
+            python-version: "3.13"
+          - core-version: "2026.2.3"
+            python-version: "3.13"
+          - core-version: "2026.3.4"
+            python-version: "3.14.2"
+          - core-version: "2026.4.4"
+            python-version: "3.14.2"
+          - core-version: "2026.5.4"
+            python-version: "3.14.2"
+          - core-version: "2026.6.4"
+            python-version: "3.14.2"
+          - core-version: "2026.7.4"
+            python-version: "3.14.2"
+          - core-version: "2026.8.3"
+            python-version: "3.14.2"
+          - core-version: "2026.9.1"
+            python-version: "3.14.2"
+          - core-version: "dev"
+            python-version: "3.14.2"
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3
+        uses: actions/checkout@v7.0.1
 
       - name: Install Home Assistant
         uses: ./.github/workflows/install_dependencies
@@ -42,39 +52,73 @@ jobs:
           python-version: ${{ matrix.python-version }}
           core-version: ${{ matrix.core-version }}
 
-      - name: Click here for troubleshooting steps if tests break again.
-        run: |
-          echo "::notice::### If tests fail, try these debug steps: ###"
-          echo "::notice::### 1. Replace '-qq' from .github/workflow/pytest.yaml. with '-v' for extra verbosity. ###"
-          echo "::notice::### 2. Push or run action again. ###"
-          echo "::notice::### 3. Check for any log messages in github actions resembling the following using CTRL+F ###
-          echo "::notice::### 4. ERROR:homeassistant.setup:Setup failed for 'component': Unable to import component: No module named ''module'' ###"
-          echo "::notice::### 5. add 'component'.'module' (without the '') from the above log into the 'required' list inside of 'test_dependencies.py' ###"
-          echo "::notice::### 6. Try again! If more issues persist they should be easily solvable by reading the verbose logs now. ###"
-
-      - name: Link custom_components/adaptive_lighting
-        run: |
-          cd core
-
-          # Link adaptive_lighting tests
-          cd tests/components/
-          ln -fs ../../../tests adaptive_lighting
-          cd -
-
       - name: Run pytest
+        id: pytest
         timeout-minutes: 60
         run: |
           export PYTHONPATH=${PYTHONPATH}:${PWD}
+          source .venv/bin/activate
           cd core
           python3 -X dev -m pytest \
             -vvv \
             -qq \
             --timeout=9 \
             --durations=10 \
-            --cov="custom_components.adaptive_lighting" \
+            --cov=homeassistant.components.adaptive_lighting \
+            --cov-branch \
+            --cov-report=term-missing \
             --cov-report=xml \
+            --cov-report=json \
+            --cov-report=html \
             -o console_output_style=count \
             -p no:sugar \
             tests/components/adaptive_lighting
+
+      - name: Write coverage summary
+        if: ${{ !cancelled() }}
         env:
-          HA_CLONE: true
+          CORE_VERSION: ${{ matrix.core-version }}
+          PYTHON_VERSION: ${{ matrix.python-version }}
+          PYTEST_OUTCOME: ${{ steps.pytest.outcome }}
+        run: |
+          {
+            echo "### Coverage: Home Assistant ${CORE_VERSION}, Python ${PYTHON_VERSION}"
+            echo
+            if [[ -f core/coverage.json ]]; then
+              echo "| Metric | Executed | Total | Coverage |"
+              echo "| --- | ---: | ---: | ---: |"
+              jq -r '
+                def percent(covered; total):
+                  if total == 0 then 100 else (covered / total * 10000 | round) / 100 end;
+                .totals
+                | "| Lines | \(.covered_lines) | \(.num_statements) | \(percent(.covered_lines; .num_statements))% |\n"
+                + "| Branches | \(.covered_branches) | \(.num_branches) | \(percent(.covered_branches; .num_branches))% |"
+              ' core/coverage.json
+            else
+              echo "Coverage JSON was not generated. See the pytest step for details."
+            fi
+          } >> "${GITHUB_STEP_SUMMARY}"
+
+          if [[ ! -f core/coverage.json && "${PYTEST_OUTCOME}" == "success" ]]; then
+            exit 1
+          fi
+
+          if [[ "${CORE_VERSION}" != "dev" && "${PYTEST_OUTCOME}" == "success" ]]; then
+            echo "Required coverage: 89% lines and 80% branches." >> "${GITHUB_STEP_SUMMARY}"
+            if ! jq -e '.totals | .covered_lines * 100 >= .num_statements * 89
+              and .covered_branches * 100 >= .num_branches * 80' core/coverage.json > /dev/null; then
+              echo "::error::Coverage must be at least 89% lines and 80% branches."
+              exit 1
+            fi
+          fi
+
+      - name: Upload coverage reports
+        if: ${{ !cancelled() }}
+        uses: actions/upload-artifact@v7.0.1
+        with:
+          name: coverage-${{ matrix.core-version }}-py${{ matrix.python-version }}
+          path: |
+            core/coverage.xml
+            core/coverage.json
+            core/htmlcov/
+          if-no-files-found: warn

.github/workflows/release-drafter.yml

@@ -17,6 +17,8 @@ jobs:
       pull-requests: write
     runs-on: ubuntu-latest
     steps:
-      - uses: release-drafter/release-drafter@v5
+      - uses: release-drafter/release-drafter@v7.7.0
+        with:
+          dry-run: ${{ github.event_name == 'pull_request' }}
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/toc.yaml

@@ -1,10 +0,0 @@
-on: push
-name: TOC Generator
-jobs:
-  generateTOC:
-    name: TOC Generator
-    runs-on: ubuntu-latest
-    steps:
-      - uses: technote-space/toc-generator@v4
-        with:
-          TOC_TITLE: ""

.github/workflows/update-readme.yml

@@ -1,62 +0,0 @@
-name: Update README.md, strings.json, and services.yaml
-
-on:
-  push:
-    branches:
-      - master
-    paths:
-      - "README.md"
-      - "custom_components/adaptive_lighting/const.py"
-      - "github/workflows/update-readme.yml"
-  pull_request:
-
-jobs:
-  update_readme:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Check out code from GitHub
-        uses: actions/checkout@v3
-
-      - name: Install Home Assistant
-        uses: ./.github/workflows/install_dependencies
-        with:
-          python-version: "3.11"
-
-      - name: Install markdown-code-runner and README code dependencies
-        run: |
-          pip install markdown-code-runner==1.0.0 pandas tabulate
-
-      - name: Link custom_components/adaptive_lighting
-        run: |
-          cd core/homeassistant/components
-          ln -fs ../../../custom_components/adaptive_lighting adaptive_lighting
-
-      - name: Run markdown-code-runner
-        run: markdown-code-runner --debug README.md
-
-      - name: Run update services.yaml
-        run: python .github/update-services.py
-
-      - name: Run update strings.json
-        run: python .github/update-strings.py
-
-      - name: Commit updated README.md, strings.json, and services.yaml
-        id: commit
-        run: |
-          git add -u .
-          git config --local user.email "github-actions[bot]@users.noreply.github.com"
-          git config --local user.name "github-actions[bot]"
-          if git diff --quiet && git diff --staged --quiet; then
-            echo "No changes in README.md, strings.json, and services.yaml, skipping commit."
-            echo "commit_status=skipped" >> $GITHUB_ENV
-          else
-            git commit -m "Update README.md, strings.json, and services.yaml"
-            echo "commit_status=committed" >> $GITHUB_ENV
-          fi
-
-      - name: Push changes
-        if: env.commit_status == 'committed'
-        uses: ad-m/github-push-action@master
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          branch: ${{ github.head_ref }}

.github/workflows/update-test-matrix.yaml

@@ -0,0 +1,59 @@
+name: Update Test Matrix
+
+on:
+  schedule:
+    # Run weekly on Monday at 9:00 UTC
+    - cron: "0 9 * * 1"
+  workflow_dispatch: # Allow manual trigger
+
+permissions:
+  contents: write
+  pull-requests: write
+
+jobs:
+  update-matrix:
+    name: Update HA Core versions in test matrix
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v7.0.1
+
+      - name: Set up Python
+        uses: actions/setup-python@v7.0.0
+        with:
+          python-version: "3.14.7"
+
+      - name: Update test matrix
+        run: python scripts/update-test-matrix.py
+
+      - name: Check for changes
+        id: changes
+        run: |
+          if git diff --quiet .github/workflows/pytest.yaml; then
+            echo "changed=false" >> $GITHUB_OUTPUT
+          else
+            echo "changed=true" >> $GITHUB_OUTPUT
+            echo "Detected changes:"
+            git diff .github/workflows/pytest.yaml
+          fi
+
+      - name: Create Pull Request
+        if: steps.changes.outputs.changed == 'true'
+        uses: peter-evans/create-pull-request@v8.1.1
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          commit-message: "ci: update HA Core test matrix versions"
+          title: "ci: Update Home Assistant Core test matrix"
+          body: |
+            This PR automatically updates the pytest workflow to test against the latest Home Assistant Core versions.
+
+            ## Changes
+            - Updated HA Core versions in the test matrix to include latest patch releases
+
+            ---
+            🤖 Generated automatically by the update-test-matrix workflow
+          branch: update-test-matrix
+          delete-branch: true
+          labels: |
+            automation
+            ci

.github/workflows/validate.yml

@@ -10,8 +10,9 @@ on:
 jobs:
   validate_hacs:
     runs-on: "ubuntu-latest"
+    if: github.repository == 'basnijholt/adaptive-lighting' # Don't run on forked repos
     steps:
-      - uses: "actions/checkout@v2"
+      - uses: "actions/checkout@v7.0.1"
       - name: HACS validation
         uses: "hacs/action@main"
         with:

.gitignore

@@ -135,3 +135,6 @@ dmypy.json
 # Home Assistant configuration
 config/*
 !config/configuration.yaml
+
+# Home Assistant core
+core/

.pre-commit-config.yaml

@@ -1,18 +1,24 @@
 repos:
   - repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.4.0
+    rev: v6.0.0
     hooks:
       - id: check-added-large-files
       - id: trailing-whitespace
       - id: end-of-file-fixer
       - id: mixed-line-ending
         args: ["--fix=lf"]
+  - repo: https://github.com/thlorenz/doctoc
+    rev: v2.5.0
+    hooks:
+      - id: doctoc
+        files: ^README[^/]*\.md$
+        args: ["--notitle"]
   - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: v0.0.282
+    rev: v0.16.6
     hooks:
       - id: ruff
         args: ["--fix"]
-  - repo: https://github.com/psf/black
-    rev: 23.7.0
+  - repo: https://github.com/psf/black-pre-commit-mirror
+    rev: 26.5.1
     hooks:
       - id: black

.ruff.toml

@@ -1,40 +1,62 @@
 # The contents of this file is based on https://github.com/home-assistant/core/blob/dev/pyproject.toml
 
-target-version = "py310"
-
+target-version = "py312"
+[lint]
 select = ["ALL"]
 
 # All the ones without a comment were the ones that are currently violated
 # by the codebase. The plan is to fix them all (when sensible) and then enable them.
 ignore = [
     "ANN",
-    "ANN101",  # Missing type annotation for {name} in method
     "ANN401",  # Dynamically typed expressions (typing.Any) are disallowed in {name}
+    "CPY001",  # Missing copyright notice at top of file
     "D401",    # First line of docstring should be in imperative mood
     "E501",    # line too long
     "FBT001",  # Boolean positional arg in function definition
     "FBT002",  # Boolean default value in function definition
     "FIX004",  # Line contains HACK, consider resolving the issue
-    "PD901",   # df is a bad variable name. Be kinder to your future self.
     "PERF203", # `try`-`except` within a loop incurs performance overhead
+    "PLC0415", # `import` should be at the top-level of a file
     "PLR0913", # Too many arguments to function call (N > 5)
+    "PLR0917", # Too many positional arguments
     "PLR2004", # Magic value used in comparison, consider replacing X with a constant variable
+    "RUF059",  # Unpacked variable is never used
     "S101",    # Use of assert detected
     "SLF001",  # Private member accessed
+    "UP017",   # Use datetime.UTC alias
+    "UP042",   # Replace str, Enum inheritance with StrEnum
 ]
 
-[per-file-ignores]
-"tests/*.py" = ["ALL"]
+[lint.per-file-ignores]
+"tests/*.py" = [
+    "ARG001",  # Unused function argument: `call`
+    "D100",    # Missing docstring in public module
+    "D103",    # Missing docstring in public function
+    "D205",    # 1 blank line required between summary line and description
+    "D400",    # First line should end with a period
+    "D415",    # First line should end with a period, question mark, or
+    "DTZ001",  # The use of `datetime.datetime()` without `tzinfo`
+    "ERA001",  # Found commented-out code
+    "FBT003",  # Boolean positional value in function call
+    "FIX002",  # Line contains TODO, consider resolving the issue
+    "G004",    # Logging statement uses f-string
+    "PLR0915", # Too many statements (94 > 50)
+    "PT004",   # Fixture `cleanup` does not return anything, add leading underscore
+    "PT007",   # Wrong values type in `@pytest.mark.parametrize` expected `list` of
+    "S311",    # Standard pseudo-random generators are not suitable for cryptographic
+    "TD002",   # Missing author in TODO; try: `# TODO(<author_name>): ...` or `# TODO
+    "TD003",   # Missing issue link on the line following this TODO
+]
 ".github/*py" = ["INP001"]
 "webapp/homeassistant_util_color.py" = ["ALL"]
 "webapp/app.py" = ["INP001", "DTZ011", "A002"]
 "custom_components/adaptive_lighting/homeassistant_util_color.py" = ["ALL"]
 
-[flake8-pytest-style]
+[lint.flake8-pytest-style]
 fixture-parentheses = false
 
-[pyupgrade]
+[lint.pyupgrade]
 keep-runtime-typing = true
 
-[mccabe]
+[lint.mccabe]
 max-complexity = 25

.vscode/settings.json

@@ -0,0 +1,23 @@
+{
+    "files.associations": {
+        "*.yaml": "home-assistant"
+    },
+    "python.defaultInterpreterPath": "${workspaceFolder}/.venv/bin/python",
+    "python.testing.pytestEnabled": true,
+    "python.testing.pytestArgs": [
+        "-vvv",
+        "-qq",
+        "--timeout=9",
+        "--durations=10",
+        "--cov=homeassistant",
+        "--cov-report=xml",
+        "-o",
+        "console_output_style=count",
+        "-p",
+        "no:sugar",
+        "core/tests/components/adaptive_lighting"
+    ],
+    "python.analysis.extraPaths": [
+        "${workspaceFolder}/core"
+    ]
+}

Dockerfile

@@ -1,45 +1,41 @@
 # See tests/README.md for instructions on how to run the tests.
 
 # tl;dr:
-# Run the following command in the adaptive-lighting repo folder to run the tests:
-# docker run -v $(pwd):/app basnijholt/adaptive-lighting:latest
+# 1. Clone HA core into ./core: git clone --depth 1 https://github.com/home-assistant/core.git core
+# 2. Setup symlinks: ./scripts/setup-symlinks
+# 3. Run tests (mount entire repo, not individual dirs, or symlinks break):
+#    docker run -v $(pwd):/app basnijholt/adaptive-lighting:latest
 
 # Optionally build the image yourself with:
 # docker build -t basnijholt/adaptive-lighting:latest .
 
-FROM python:3.11-buster
+FROM ghcr.io/astral-sh/uv:debian
 
-RUN apt-get update && \
-    DEBIAN_FRONTEND=noninteractive apt-get install -y \
-    git \
-    build-essential libssl-dev libffi-dev python3-dev \
+# Install build dependencies for Python extensions
+RUN apt-get update && apt-get install -y --no-install-recommends \
+    python3-dev \
+    build-essential \
     && rm -rf /var/lib/apt/lists/*
 
 # Clone home-assistant/core
-RUN git clone --depth 1 https://github.com/home-assistant/core.git /core
-
-# Install home-assistant/core dependencies
-RUN pip3 install -r /core/requirements.txt --use-pep517 && \
-    pip3 install -r /core/requirements_test.txt --use-pep517 && \
-    pip3 install -e /core/ --use-pep517
+RUN git clone --depth 1 --branch dev https://github.com/home-assistant/core.git /core
 
 # Copy the Adaptive Lighting repository
 COPY . /app/
 
 # Setup symlinks in core
-RUN ln -s /app/tests /core/tests/components/adaptive_lighting && \
-    # For test_dependencies.py
-    ln -s /core /app/core
+RUN ln -s /core /app/core && /app/scripts/setup-symlinks
 
-# Install dependencies of components that Adaptive Lighting depends on
-RUN pip3 install $(python3 /app/test_dependencies.py) --use-pep517
+# Install home-assistant/core dependencies
+RUN mkdir -p /.venv
+ENV UV_PROJECT_ENVIRONMENT=/.venv UV_PYTHON=3.14.2 PATH="/.venv/bin:$PATH"
+RUN uv venv
+RUN /app/scripts/setup-dependencies
 
-WORKDIR /core
+WORKDIR /app/core
 
 # Make 'custom_components/adaptive_lighting' imports available to tests
-ENV PYTHONPATH="${PYTHONPATH}:/app"
-# Enable testing against HA clone (instead of pytest_homeassistant_custom_component)
-ENV HA_CLONE=true
+ENV PYTHONPATH="/app"
 
 ENTRYPOINT ["python3", \
     # Enable Python development mode
@@ -52,8 +48,8 @@ ENTRYPOINT ["python3", \
     "--timeout=9", \
     # Print the 10 slowest tests
     "--durations=10", \
-    # Measure code coverage for the 'homeassistant' package
-    "--cov=custom_components.adaptive_lighting", \
+    # Measure code coverage for the 'homeassistant.components.adaptive_lighting' component
+    "--cov=homeassistant.components.adaptive_lighting", \
     # Generate an XML report of the code coverage
     "--cov-report=xml", \
     # Generate an HTML report of the code coverage

blueprints/automation/daylight_limit.yaml

@@ -0,0 +1,112 @@
+blueprint:
+  name: "Adaptive Lighting: limit brightness in daylight"
+  description: >-
+    Lower a profile's maximum brightness in strong daylight and restore the
+    chosen normal maximum when daylight falls. Separate lux thresholds prevent
+    repeated changes near a single threshold. Use a sensor not significantly
+    affected by the controlled lights. Keep the daylight maximum at or above
+    the profile's minimum unless you want an inverted brightness curve.
+    Startup waits up to five minutes for a numeric sensor reading; a reading
+    between the thresholds leaves the configured maximum unchanged.
+  domain: automation
+  homeassistant:
+    min_version: "2025.9.0"
+  input:
+    adaptive_switch:
+      name: Adaptive Lighting profile
+      description: Select the main profile switch, not a sleep or adaptation switch.
+      selector:
+        entity:
+          filter:
+            domain: switch
+            integration: adaptive_lighting
+    illuminance_sensor:
+      name: Illuminance sensor
+      selector:
+        entity:
+          filter:
+            domain: sensor
+            device_class: illuminance
+    high_lux:
+      name: Strong daylight threshold
+      description: Must be greater than the low daylight threshold.
+      default: 300
+      selector:
+        number:
+          min: 0
+          max: 200000
+          mode: box
+          unit_of_measurement: lx
+    low_lux:
+      name: Low daylight threshold
+      default: 200
+      selector:
+        number:
+          min: 0
+          max: 200000
+          mode: box
+          unit_of_measurement: lx
+    daylight_maximum:
+      name: Maximum brightness in strong daylight
+      default: 30
+      selector:
+        number:
+          min: 1
+          max: 100
+          mode: box
+          unit_of_measurement: "%"
+    normal_maximum:
+      name: Normal maximum brightness
+      default: 100
+      selector:
+        number:
+          min: 1
+          max: 100
+          mode: box
+          unit_of_measurement: "%"
+
+mode: restart
+variables:
+  illuminance_sensor: !input illuminance_sensor
+  high_lux: !input high_lux
+  low_lux: !input low_lux
+triggers:
+  - trigger: numeric_state
+    entity_id: !input illuminance_sensor
+    above: !input high_lux
+  - trigger: numeric_state
+    entity_id: !input illuminance_sensor
+    below: !input low_lux
+  - trigger: homeassistant
+    event: start
+    id: startup
+conditions:
+  - condition: template
+    value_template: "{{ high_lux > low_lux }}"
+actions:
+  - if:
+      - condition: trigger
+        id: startup
+    then:
+      - wait_template: "{{ is_number(states(illuminance_sensor)) }}"
+        timeout: "00:05:00"
+        continue_on_timeout: false
+  - choose:
+      - conditions:
+          - condition: numeric_state
+            entity_id: !input illuminance_sensor
+            above: !input high_lux
+        sequence:
+          - action: adaptive_lighting.change_switch_settings
+            data:
+              entity_id: !input adaptive_switch
+              max_brightness: !input daylight_maximum
+      - conditions:
+          - condition: numeric_state
+            entity_id: !input illuminance_sensor
+            below: !input low_lux
+        sequence:
+          - action: adaptive_lighting.change_switch_settings
+            data:
+              entity_id: !input adaptive_switch
+              max_brightness: !input normal_maximum

blueprints/automation/manual_control_at_minimum.yaml

@@ -0,0 +1,123 @@
+blueprint:
+  name: "Adaptive Lighting: pause brightness at minimum"
+  description: >-
+    Mark one light's brightness as manually controlled when its calculated
+    brightness target crosses down to the configured minimum. Set the profile's
+    take_over_control_mode to pause_changed to keep adapting color; pause_all
+    pauses both. Existing manual color control is preserved. Uses the normal
+    manual-control resets, including turning the light off and any configured
+    autoreset_control_seconds timeout. Runs once per downward crossing, so a
+    reset while the target remains low does not immediately pause it again.
+    Waits up to five minutes for reported brightness to reach the rounded
+    0–255 minimum before pausing. This does not prove physical fade completion. Does not
+    change power or adaptation switches. Select an individual light managed by
+    the profile. Shared profiles retain their usual manual-control behavior.
+  domain: automation
+  homeassistant:
+    min_version: "2025.9.0"
+  input:
+    adaptive_switch:
+      name: Adaptive Lighting profile
+      description: Select the main Adaptive Lighting switch, not a sleep or adaptation switch.
+      selector:
+        entity:
+          filter:
+            domain: switch
+            integration: adaptive_lighting
+    brightness_switch:
+      name: Adapt brightness switch
+      description: Select the adapt brightness switch belonging to the same profile.
+      selector:
+        entity:
+          filter:
+            domain: switch
+            integration: adaptive_lighting
+    light_entity:
+      name: Light
+      description: Select one light managed by this profile. Create an automation for each light.
+      selector:
+        entity:
+          filter:
+            domain: light
+    minimum_pct:
+      name: Minimum brightness
+      description: Match the profile's min_brightness setting. Update this if that setting changes.
+      default: 1
+      selector:
+        number:
+          min: 1
+          max: 100
+          step: 1
+          unit_of_measurement: "%"
+          mode: box
+
+mode: single
+variables:
+  adaptive_switch: !input adaptive_switch
+  light_entity: !input light_entity
+  minimum_pct: !input minimum_pct
+  minimum: "{{ (minimum_pct * 255 / 100) | round(0) }}"
+  brightness_switch: !input brightness_switch
+triggers:
+  - trigger: state
+    entity_id: !input adaptive_switch
+    attribute: brightness_pct
+conditions:
+  - condition: state
+    entity_id: !input adaptive_switch
+    state: "on"
+  - condition: state
+    entity_id: !input brightness_switch
+    state: "on"
+  - condition: template
+    value_template: >-
+      {% set before = trigger.from_state.attributes.get('brightness_pct')
+                      if trigger.from_state else none %}
+      {% set after = trigger.to_state.attributes.get('brightness_pct')
+                     if trigger.to_state else none %}
+      {{ is_number(before) and is_number(after)
+         and (before | float * 255 / 100) | round(0) > minimum
+         and (after | float * 255 / 100) | round(0) <= minimum }}
+  - condition: state
+    entity_id: !input light_entity
+    state: "on"
+  - condition: template
+    value_template: >-
+      {{ light_entity not in (state_attr(adaptive_switch, 'manual_control_brightness') or []) }}
+actions:
+  - variables:
+      light_session: "{{ states[light_entity].last_changed.isoformat() }}"
+      profile_session: "{{ states[adaptive_switch].last_changed.isoformat() }}"
+      brightness_session: "{{ states[brightness_switch].last_changed.isoformat() }}"
+  - wait_template: >-
+      {% set target = state_attr(adaptive_switch, 'brightness_pct') %}
+      {{ not is_state(light_entity, 'on') or not is_state(adaptive_switch, 'on')
+         or not is_state(brightness_switch, 'on')
+         or states[light_entity].last_changed.isoformat() != light_session
+         or states[adaptive_switch].last_changed.isoformat() != profile_session
+         or states[brightness_switch].last_changed.isoformat() != brightness_session
+         or not is_number(target) or (target | float * 255 / 100) | round(0) > minimum
+         or light_entity in (state_attr(adaptive_switch, 'manual_control_brightness') or [])
+         or (state_attr(light_entity, 'brightness') | float(256)) <= minimum }}
+    timeout: "00:05:00"
+    continue_on_timeout: false
+  - condition: template
+    value_template: >-
+      {% set target = state_attr(adaptive_switch, 'brightness_pct') %}
+      {{ is_state(light_entity, 'on') and is_state(adaptive_switch, 'on')
+         and is_state(brightness_switch, 'on')
+         and states[light_entity].last_changed.isoformat() == light_session
+         and states[adaptive_switch].last_changed.isoformat() == profile_session
+         and states[brightness_switch].last_changed.isoformat() == brightness_session
+         and is_number(target) and (target | float * 255 / 100) | round(0) <= minimum
+         and (state_attr(light_entity, 'brightness') | float(256)) <= minimum
+         and light_entity not in
+             (state_attr(adaptive_switch, 'manual_control_brightness') or []) }}
+  - action: adaptive_lighting.set_manual_control
+    data:
+      entity_id: !input adaptive_switch
+      lights: !input light_entity
+      manual_control: >-
+        {{ true if light_entity in
+           (state_attr(adaptive_switch, 'manual_control_color') or [])
+           else 'brightness' }}

blueprints/automation/schedule_profile.yaml

@@ -0,0 +1,57 @@
+blueprint:
+  name: "Adaptive Lighting: scheduled profile"
+  description: >-
+    Apply fixed brightness and color temperature from a Schedule helper's
+    brightness_pct and color_temp_kelvin attributes. Uses step changes, not
+    interpolation. Missing attributes fall back to 1% and 2000 K. Outside an
+    active block, restores ALL configured profile settings. Use this only if
+    other automations do not also change runtime settings on this profile.
+    Reapplies the active block on Home Assistant startup. Updates settings
+    while the profile is off without enabling it; preserves manual control.
+  domain: automation
+  homeassistant:
+    min_version: "2025.9.0"
+  input:
+    adaptive_switch:
+      name: Adaptive Lighting profile
+      description: Select the main profile switch, not a sleep or adaptation switch.
+      selector:
+        entity:
+          filter:
+            domain: switch
+            integration: adaptive_lighting
+    schedule_entity:
+      name: Schedule helper
+      description: Add brightness_pct (1–100) and color_temp_kelvin to each block's Additional data.
+      selector:
+        entity:
+          filter:
+            domain: schedule
+
+mode: restart
+variables:
+  schedule_entity: !input schedule_entity
+triggers:
+  - trigger: state
+    entity_id: !input schedule_entity
+  - trigger: homeassistant
+    event: start
+actions:
+  - choose:
+      - conditions:
+          - condition: state
+            entity_id: !input schedule_entity
+            state: "on"
+        sequence:
+          - action: adaptive_lighting.change_switch_settings
+            data:
+              entity_id: !input adaptive_switch
+              min_brightness: "{{ state_attr(schedule_entity, 'brightness_pct') | int(1) }}"
+              max_brightness: "{{ state_attr(schedule_entity, 'brightness_pct') | int(1) }}"
+              min_color_temp: "{{ state_attr(schedule_entity, 'color_temp_kelvin') | int(2000) }}"
+              max_color_temp: "{{ state_attr(schedule_entity, 'color_temp_kelvin') | int(2000) }}"
+    default:
+      - action: adaptive_lighting.change_switch_settings
+        data:
+          entity_id: !input adaptive_switch
+          use_defaults: configuration

blueprints/automation/sleep_mode.yaml

@@ -0,0 +1,42 @@
+blueprint:
+  name: "Adaptive Lighting: synchronize sleep mode"
+  description: >-
+    Keep the selected Adaptive Lighting sleep-mode switches in sync with an
+    input boolean, including its restored state at Home Assistant startup.
+    Unknown or unavailable helper states are ignored. Select only sleep-mode
+    switches, not the main profile or adaptation switches.
+  domain: automation
+  homeassistant:
+    min_version: "2025.9.0"
+  input:
+    sleep_helper:
+      name: Sleep-mode helper
+      selector:
+        entity:
+          filter:
+            domain: input_boolean
+    sleep_switches:
+      name: Adaptive Lighting sleep-mode switches
+      selector:
+        entity:
+          multiple: true
+          filter:
+            domain: switch
+            integration: adaptive_lighting
+
+triggers:
+  - trigger: state
+    entity_id: !input sleep_helper
+  - trigger: homeassistant
+    event: start
+variables:
+  sleep_helper: !input sleep_helper
+  sleep_mode: "{{ states(sleep_helper) }}"
+conditions:
+  - condition: template
+    value_template: "{{ sleep_mode in ['on', 'off'] }}"
+actions:
+  - action: "switch.turn_{{ sleep_mode }}"
+    target:
+      entity_id: !input sleep_switches
+mode: restart

blueprints/automation/turn_off_at_minimum.yaml

@@ -0,0 +1,87 @@
+blueprint:
+  name: "Adaptive Lighting: turn off at minimum brightness"
+  description: >-
+    Turn one light off when its Adaptive Lighting target crosses down into the
+    chosen minimum brightness range. Compares rounded 0–255 commands, not the
+    bulb's physical dimming limit or transition completion. Skips lights currently
+    marked as manually controlled. Changing sleep mode clears manual control by
+    default; set reset_manual_control_on_sleep_mode_change to false in your
+    profile to preserve it. Does not turn lights back on or repeatedly turn them off
+    while the target stays low. Startup at the minimum does not trigger it.
+    Sleep mode can trigger it if its target crosses the chosen minimum.
+    Select a light managed by the chosen profile and its matching brightness switch.
+  domain: automation
+  homeassistant:
+    min_version: "2025.9.0"
+  input:
+    adaptive_switch:
+      name: Adaptive Lighting profile
+      description: Select the main Adaptive Lighting switch, not a sleep or adaptation switch.
+      selector:
+        entity:
+          filter:
+            domain: switch
+            integration: adaptive_lighting
+    brightness_switch:
+      name: Adapt brightness switch
+      description: Select the adapt brightness switch belonging to the same profile.
+      selector:
+        entity:
+          filter:
+            domain: switch
+            integration: adaptive_lighting
+    light_entity:
+      name: Light
+      description: Select one light managed by this profile. Create an automation for each light.
+      selector:
+        entity:
+          filter:
+            domain: light
+    minimum_pct:
+      name: Minimum brightness
+      description: Match the profile's min_brightness setting. Update this if that setting changes.
+      default: 1
+      selector:
+        number:
+          min: 1
+          max: 100
+          step: 1
+          unit_of_measurement: "%"
+          mode: box
+
+mode: single
+variables:
+  adaptive_switch: !input adaptive_switch
+  light_entity: !input light_entity
+  minimum_pct: !input minimum_pct
+triggers:
+  - trigger: state
+    entity_id: !input adaptive_switch
+    attribute: brightness_pct
+conditions:
+  - condition: state
+    entity_id: !input adaptive_switch
+    state: "on"
+  - condition: state
+    entity_id: !input brightness_switch
+    state: "on"
+  - condition: template
+    value_template: >-
+      {% set minimum = (minimum_pct * 255 / 100) | round(0) %}
+      {% set before = trigger.from_state.attributes.get('brightness_pct')
+                      if trigger.from_state else none %}
+      {% set after = trigger.to_state.attributes.get('brightness_pct')
+                     if trigger.to_state else none %}
+      {{ is_number(before) and is_number(after)
+         and (before | float * 255 / 100) | round(0) > minimum
+         and (after | float * 255 / 100) | round(0) <= minimum }}
+  - condition: state
+    entity_id: !input light_entity
+    state: "on"
+  - condition: template
+    value_template: >-
+      {{ light_entity not in (state_attr(adaptive_switch, 'manual_control') or []) }}
+actions:
+  - action: light.turn_off
+    target:
+      entity_id: !input light_entity

custom_components/adaptive_lighting/__init__.py

@@ -1,19 +1,33 @@
 """Adaptive Lighting integration in Home-Assistant."""
+
 import logging
+from functools import partial
 from typing import Any
 
 import homeassistant.helpers.config_validation as cv
 import voluptuous as vol
 from homeassistant.config_entries import SOURCE_IMPORT, ConfigEntry
-from homeassistant.const import CONF_SOURCE
-from homeassistant.core import HomeAssistant
+from homeassistant.const import CONF_SOURCE, Platform
+from homeassistant.core import Event, HomeAssistant
+from homeassistant.helpers import service
 
 from .const import (
-    _DOMAIN_SCHEMA,
+    _DOMAIN_SCHEMA,  # pyright: ignore[reportPrivateUsage]
     ATTR_ADAPTIVE_LIGHTING_MANAGER,
     CONF_NAME,
     DOMAIN,
+    SERVICE_APPLY,
+    SERVICE_CHANGE_SWITCH_SETTINGS,
+    SERVICE_SET_MANUAL_CONTROL,
+    SET_MANUAL_CONTROL_SCHEMA,
     UNDO_UPDATE_LISTENER,
+    apply_service_schema,
+    change_switch_settings_schema,
+)
+from .switch import (
+    handle_apply_service,
+    handle_change_switch_settings,
+    handle_set_manual_control_service,
 )
 
 _LOGGER = logging.getLogger(__name__)
@@ -21,7 +35,7 @@ _LOGGER = logging.getLogger(__name__)
 PLATFORMS = ["switch"]
 
 
-def _all_unique_names(value):
+def _all_unique_names(value: list[dict[str, Any]]) -> list[dict[str, Any]]:
     """Validate that all entities have a unique profile name."""
     hosts = [device[CONF_NAME] for device in value]
     schema = vol.Schema(vol.Unique())
@@ -35,13 +49,45 @@ CONFIG_SCHEMA = vol.Schema(
 )
 
 
-async def reload_configuration_yaml(event: dict, hass: HomeAssistant):  # noqa: ARG001
+async def reload_configuration_yaml(event: Event) -> None:
     """Reload configuration.yaml."""
-    await hass.services.async_call("homeassistant", "check_config", {})
+    hass: HomeAssistant | None = event.data.get("hass")
+    if hass is not None:
+        await hass.services.async_call("homeassistant", "check_config", {})
+    else:
+        _LOGGER.error("HomeAssistant instance not found in event data.")
 
 
-async def async_setup(hass: HomeAssistant, config: dict[str, Any]):
+async def async_setup(hass: HomeAssistant, config: dict[str, Any]) -> bool:
     """Import integration from config."""
+    hass.services.async_register(
+        domain=DOMAIN,
+        service=SERVICE_APPLY,
+        service_func=partial(handle_apply_service, hass),
+        schema=apply_service_schema(),
+    )
+
+    hass.services.async_register(
+        domain=DOMAIN,
+        service=SERVICE_SET_MANUAL_CONTROL,
+        service_func=partial(handle_set_manual_control_service, hass),
+        schema=SET_MANUAL_CONTROL_SCHEMA,
+    )
+
+    if register_platform_service := getattr(
+        service,
+        "async_register_platform_entity_service",
+        None,
+    ):
+        register_platform_service(
+            hass,
+            DOMAIN,
+            SERVICE_CHANGE_SWITCH_SETTINGS,
+            entity_domain=Platform.SWITCH,
+            func=handle_change_switch_settings,
+            schema=change_switch_settings_schema(),
+        )
+
     if DOMAIN in config:
         for entry in config[DOMAIN]:
             hass.async_create_task(
@@ -54,7 +100,7 @@ async def async_setup(hass: HomeAssistant, config: dict[str, Any]):
     return True
 
 
-async def async_setup_entry(hass: HomeAssistant, config_entry: ConfigEntry):
+async def async_setup_entry(hass: HomeAssistant, config_entry: ConfigEntry) -> bool:
     """Set up the component."""
     data = hass.data.setdefault(DOMAIN, {})
 
@@ -64,20 +110,17 @@ async def async_setup_entry(hass: HomeAssistant, config_entry: ConfigEntry):
 
     undo_listener = config_entry.add_update_listener(async_update_options)
     data[config_entry.entry_id] = {UNDO_UPDATE_LISTENER: undo_listener}
-    for platform in PLATFORMS:
-        hass.async_create_task(
-            hass.config_entries.async_forward_entry_setup(config_entry, platform),
-        )
+    await hass.config_entries.async_forward_entry_setups(config_entry, PLATFORMS)
 
     return True
 
 
-async def async_update_options(hass, config_entry: ConfigEntry):
+async def async_update_options(hass: HomeAssistant, config_entry: ConfigEntry) -> None:
     """Update options."""
     await hass.config_entries.async_reload(config_entry.entry_id)
 
 
-async def async_unload_entry(hass, config_entry: ConfigEntry) -> bool:
+async def async_unload_entry(hass: HomeAssistant, config_entry: ConfigEntry) -> bool:
     """Unload a config entry."""
     unload_ok = await hass.config_entries.async_forward_entry_unload(
         config_entry,

custom_components/adaptive_lighting/_docs_helpers.py

@@ -15,7 +15,7 @@ from .const import (
 )
 
 
-def _format_voluptuous_instance(instance):
+def _format_voluptuous_instance(instance: vol.All) -> str:
     coerce_type = None
     min_val = None
     max_val = None
@@ -46,6 +46,8 @@ def _type_to_str(type_: Any) -> str:  # noqa: PLR0911
         return "bool"
     if isinstance(type_, vol.All):
         return _format_voluptuous_instance(type_)
+    if isinstance(type_, vol.Any):
+        return " or ".join(_type_to_str(t) for t in type_.validators)
     if isinstance(type_, vol.In):
         return f"one of `{type_.container}`"
     if isinstance(type_, selector.SelectSelector):
@@ -56,10 +58,8 @@ def _type_to_str(type_: Any) -> str:  # noqa: PLR0911
     raise ValueError(msg)
 
 
-def generate_config_markdown_table():
-    import pandas as pd
-
-    rows = []
+def generate_config_markdown_table() -> str:
+    rows: list[dict[str, str]] = []
     for k, default, type_ in VALIDATION_TUPLES:
         description = DOCS[k]
         row = {
@@ -74,22 +74,21 @@ def generate_config_markdown_table():
     return df.to_markdown(index=False)
 
 
-def _schema_to_dict(schema: vol.Schema) -> dict[str, tuple[Any, Any]]:
-    result = {}
+def _schema_to_dict(schema: vol.Schema) -> dict[str, tuple[bool, Any]]:
+    result: dict[str, tuple[bool, Any]] = {}
     for key, value in schema.schema.items():
-        if isinstance(key, vol.Optional):
-            default_value = key.default
-            result[key.schema] = (default_value, value)
+        if isinstance(key, vol.Required | vol.Optional):
+            required = isinstance(key, vol.Required) and key.default == vol.UNDEFINED
+            result[key.schema] = (required, value)
     return result
 
 
 def _generate_service_markdown_table(
-    schema: dict[str, tuple[Any, Any]],
+    schema: vol.Schema,
     alternative_docs: dict[str, str] | None = None,
-):
-    schema = _schema_to_dict(schema)
-    rows = []
-    for k, (default, type_) in schema.items():
+) -> str:
+    rows: list[dict[str, str]] = []
+    for k, (required, type_) in _schema_to_dict(schema).items():
         if alternative_docs is not None and k in alternative_docs:
             description = alternative_docs[k]
         else:
@@ -97,7 +96,7 @@ def _generate_service_markdown_table(
         row = {
             "Service data attribute": f"`{k}`",
             "Description": description,
-            "Required": "✅" if default == vol.UNDEFINED else "❌",
+            "Required": "✅" if required else "❌",
             "Type": _type_to_str(type_),
         }
         rows.append(row)
@@ -106,11 +105,11 @@ def _generate_service_markdown_table(
     return df.to_markdown(index=False)
 
 
-def generate_apply_markdown_table():
+def generate_apply_markdown_table() -> str:
     return _generate_service_markdown_table(apply_service_schema(), DOCS_APPLY)
 
 
-def generate_set_manual_control_markdown_table():
+def generate_set_manual_control_markdown_table() -> str:
     return _generate_service_markdown_table(
         SET_MANUAL_CONTROL_SCHEMA,
         DOCS_MANUAL_CONTROL,

custom_components/adaptive_lighting/adaptation_utils.py

@@ -1,8 +1,10 @@
 """Utility functions for adaptation commands."""
+
 import logging
 from collections.abc import AsyncGenerator
 from dataclasses import dataclass
-from typing import Any, Literal
+from enum import IntFlag, auto
+from typing import Any
 
 from homeassistant.components.light import (
     ATTR_BRIGHTNESS,
@@ -11,6 +13,8 @@ from homeassistant.components.light import (
     ATTR_BRIGHTNESS_STEP_PCT,
     ATTR_COLOR_NAME,
     ATTR_COLOR_TEMP_KELVIN,
+    ATTR_EFFECT,
+    ATTR_FLASH,
     ATTR_HS_COLOR,
     ATTR_RGB_COLOR,
     ATTR_RGBW_COLOR,
@@ -41,9 +45,53 @@ BRIGHTNESS_ATTRS = {
     ATTR_BRIGHTNESS_STEP_PCT,
 }
 
+# Worst-case rounding error when Home Assistant's 0-255 brightness scale
+# round-trips through a device with coarser resolution (e.g., the 0-99 Z-Wave
+# Multilevel Switch scale). A light cannot report back a value more precise than
+# its own scale, so exact equality would never hold for such targets and
+# 'skip_redundant_commands' would keep sending them forever. The tolerance sits
+# far below the manual-control-detection threshold (BRIGHTNESS_CHANGE = 25), so
+# it cannot mask a genuine user change.
+BRIGHTNESS_TOLERANCE = 2
+
 ServiceData = dict[str, Any]
 
 
+class LightControlAttributes(IntFlag):
+    """Attributes of lights that the adaptation engine can control."""
+
+    NONE = 0
+    BRIGHTNESS = auto()
+    COLOR = auto()
+
+    ALL = BRIGHTNESS | COLOR
+
+    def __str__(self) -> str:
+        """Return a string representation of the attributes."""
+        if self == LightControlAttributes.NONE:
+            return "NONE"
+
+        return "|".join(
+            member.name
+            for member in type(self)
+            if member is not LightControlAttributes.NONE
+            and member in self
+            and member.name is not None
+        )
+
+    def has_any(self) -> bool:
+        """Determine whether any attribute is selected."""
+        return self != LightControlAttributes.NONE
+
+    def has_none(self) -> bool:
+        """Determine whether no attribute is selected."""
+        return self == LightControlAttributes.NONE
+
+    def has_all(self) -> bool:
+        """Determine whether all attributes are selected."""
+        return (self & LightControlAttributes.ALL) == LightControlAttributes.ALL
+
+
 def _split_service_call_data(service_data: ServiceData) -> list[ServiceData]:
     """Splits the service data by the adapted attributes.
 
@@ -53,7 +101,7 @@ def _split_service_call_data(service_data: ServiceData) -> list[ServiceData]:
     common_data = {k: service_data[k] for k in common_attrs if k in service_data}
 
     attributes_split_sequence = [BRIGHTNESS_ATTRS, COLOR_ATTRS]
-    service_datas = []
+    service_datas: list[dict[str, Any]] = []
 
     for attributes in attributes_split_sequence:
         split_data = {
@@ -68,25 +116,52 @@ def _split_service_call_data(service_data: ServiceData) -> list[ServiceData]:
     if service_datas and (transition := service_data.get(ATTR_TRANSITION)) is not None:
         transition /= len(service_datas)
 
-        for service_data in service_datas:
-            service_data[ATTR_TRANSITION] = transition
+        for _service_data in service_datas:
+            _service_data[ATTR_TRANSITION] = transition
 
     return service_datas
 
 
+def _is_attribute_satisfied(key: str, value: Any, attributes: dict[str, Any]) -> bool:
+    """Whether the light's current state already satisfies this target value."""
+    if key not in attributes:
+        return False
+    current = attributes[key]
+    if not isinstance(current, (int, float)) or not isinstance(value, (int, float)):
+        return value == current
+    if key == ATTR_BRIGHTNESS:
+        return abs(value - current) <= BRIGHTNESS_TOLERANCE
+    if key == ATTR_COLOR_TEMP_KELVIN and value > 0 and current > 0:
+        # Compare in mired space: most integrations quantize color temperature
+        # to whole mireds, and the kelvin error of that quantization grows
+        # quadratically with kelvin (~21 K at 6500 K, ~50 K at 10000 K), so no
+        # fixed kelvin tolerance fits the whole range. The tolerance of one
+        # mired absorbs the difference between conversion schemes: HA core's
+        # helpers floor (e.g. 5500 K -> 181 mired -> 5524 K) while some
+        # integrations round (5500 K -> 182 mired -> 5495 K), and no exact
+        # equality converges for both. One mired is far below the ~5.5 mired
+        # just-noticeable difference for color temperature.
+        return abs(round(1_000_000 / value) - round(1_000_000 / current)) <= 1
+    return value == current
+
+
 def _remove_redundant_attributes(
     service_data: ServiceData,
     state: State,
 ) -> ServiceData:
-    """Filter service data by removing attributes that already equal the given state.
+    """Filter service data by removing attributes already satisfied by the state.
 
     Removes all attributes from service call data whose values are already present
-    in the target entity's state.
+    in the target entity's state. Quantized attributes (brightness, color temp) are
+    compared with a small tolerance: a light whose resolution is coarser than Home
+    Assistant's cannot report back the exact value it was given, so exact equality
+    would never hold and the attribute would never be filtered.
     """
+    attributes: dict[str, Any] = dict(state.attributes)
     return {
         k: v
         for k, v in service_data.items()
-        if k not in state.attributes or v != state.attributes[k]
+        if not _is_attribute_satisfied(k, v, attributes)
     }
 
 
@@ -105,7 +180,7 @@ async def _create_service_call_data_iterator(
     hass: HomeAssistant,
     service_datas: list[ServiceData],
     filter_by_state: bool,
-) -> AsyncGenerator[ServiceData, None]:
+) -> AsyncGenerator[ServiceData]:
     """Enumerates and filters a list of service datas on the fly.
 
     If filtering is enabled, every service data is filtered by the current state of
@@ -140,10 +215,10 @@ class AdaptationData:
     entity_id: str
     context: Context
     sleep_time: float
-    service_call_datas: AsyncGenerator[ServiceData, None]
+    service_call_datas: AsyncGenerator[ServiceData]
     force: bool
     max_length: int
-    which: Literal["brightness", "color", "both"]
+    attributes: LightControlAttributes
     initial_sleep: bool = False
 
     async def next_service_call_data(self) -> ServiceData | None:
@@ -159,7 +234,7 @@ class AdaptationData:
             f"sleep_time={self.sleep_time}, "
             f"force={self.force}, "
             f"max_length={self.max_length}, "
-            f"which={self.which}, "
+            f"attributes={self.attributes}, "
             f"initial_sleep={self.initial_sleep}"
             ")"
         )
@@ -169,20 +244,25 @@ class NoColorOrBrightnessInServiceDataError(Exception):
     """Exception raised when no color or brightness attributes are found in service data."""
 
 
-def _identify_lighting_type(
+def _identify_light_control_attributes(
     service_data: ServiceData,
-) -> Literal["brightness", "color", "both"]:
+) -> LightControlAttributes:
     """Extract the 'which' attribute from the service data."""
     has_brightness = ATTR_BRIGHTNESS in service_data
     has_color = any(attr in service_data for attr in COLOR_ATTRS)
-    if has_brightness and has_color:
-        return "both"
+
+    parameters = LightControlAttributes.NONE
+
     if has_brightness:
-        return "brightness"
+        parameters |= LightControlAttributes.BRIGHTNESS
     if has_color:
-        return "color"
-    msg = f"Invalid service_data, no brightness or color attributes found: {service_data=}"
-    raise NoColorOrBrightnessInServiceDataError(msg)
+        parameters |= LightControlAttributes.COLOR
+
+    if parameters == LightControlAttributes.NONE:
+        msg = f"Invalid service_data, no brightness or color attributes found: {service_data=}"
+        raise NoColorOrBrightnessInServiceDataError(msg)
+
+    return parameters
 
 
 def prepare_adaptation_data(
@@ -195,6 +275,7 @@ def prepare_adaptation_data(
     split: bool,
     filter_by_state: bool,
     force: bool,
+    already_applied: LightControlAttributes = LightControlAttributes.NONE,
 ) -> AdaptationData:
     """Prepares a data object carrying all data required to execute an adaptation."""
     _LOGGER.debug(
@@ -212,13 +293,32 @@ def prepare_adaptation_data(
     else:
         sleep_time = split_delay
 
+    # Keep the original split timing, but omit attributes carried by an
+    # intercepted turn-on shared with other lights. Do this before state
+    # filtering: members can have different brightness/color already satisfied.
+    applied_attrs = (
+        BRIGHTNESS_ATTRS
+        if LightControlAttributes.BRIGHTNESS in already_applied
+        else set()
+    ) | (COLOR_ATTRS if LightControlAttributes.COLOR in already_applied else set())
+    if applied_attrs:
+        service_datas = [
+            {key: value for key, value in data.items() if key not in applied_attrs}
+            for data in service_datas
+        ]
+        service_datas = [
+            data
+            for data in service_datas
+            if _has_relevant_service_data_attributes(data)
+        ]
+
     service_data_iterator = _create_service_call_data_iterator(
         hass,
         service_datas,
         filter_by_state,
     )
 
-    lighting_type = _identify_lighting_type(service_data)
+    attributes = _identify_light_control_attributes(service_data)
 
     return AdaptationData(
         entity_id=entity_id,
@@ -226,6 +326,59 @@ def prepare_adaptation_data(
         sleep_time=sleep_time,
         service_call_datas=service_data_iterator,
         force=force,
-        max_length=service_datas_length,
-        which=lighting_type,
+        max_length=len(service_datas),
+        attributes=attributes & ~already_applied,
     )
+
+
+def manual_control_event_attribute_to_flags(
+    manual_control_attribute: bool | str,
+) -> LightControlAttributes:
+    """Convert manual control event data to light control attributes."""
+    if isinstance(manual_control_attribute, bool) and manual_control_attribute:
+        return LightControlAttributes.ALL
+    if manual_control_attribute == "brightness":
+        return LightControlAttributes.BRIGHTNESS
+    if manual_control_attribute == "color":
+        return LightControlAttributes.COLOR
+    return LightControlAttributes.NONE
+
+
+def has_brightness_attribute(
+    service_data: ServiceData,
+) -> bool:
+    """Determine whether the service data contains brightness attributes."""
+    return any(attr in BRIGHTNESS_ATTRS for attr in service_data)
+
+
+def has_color_attribute(
+    service_data: ServiceData,
+) -> bool:
+    """Determine whether the service data contains color attributes."""
+    return any(attr in COLOR_ATTRS for attr in service_data)
+
+
+def has_effect_attribute(
+    service_data: ServiceData,
+) -> bool:
+    """Determine whether the service data contains effect attributes."""
+    return ATTR_FLASH in service_data or ATTR_EFFECT in service_data
+
+
+def get_light_control_attributes(
+    service_data: ServiceData,
+) -> LightControlAttributes:
+    """Get the light control attributes affected by the service call data."""
+    parameters = LightControlAttributes.NONE
+
+    if has_brightness_attribute(service_data):
+        parameters |= LightControlAttributes.BRIGHTNESS
+
+    if has_color_attribute(service_data):
+        parameters |= LightControlAttributes.COLOR
+
+    if has_effect_attribute(service_data):
+        parameters |= LightControlAttributes.BRIGHTNESS
+        parameters |= LightControlAttributes.COLOR
+
+    return parameters

custom_components/adaptive_lighting/color_and_brightness.py

@@ -1,4 +1,5 @@
 """Switch for the Adaptive Lighting integration."""
+
 from __future__ import annotations
 
 import bisect
@@ -7,31 +8,39 @@ import datetime
 import logging
 import math
 from dataclasses import dataclass
-from datetime import timedelta
+from datetime import UTC, timedelta
+from enum import Enum
 from functools import cached_property, partial
-from typing import TYPE_CHECKING, Any, Literal, cast
+from typing import Any, Literal, cast
 
+import astral.sun
 from homeassistant.util.color import (
     color_RGB_to_xy,
     color_temperature_to_rgb,
     color_xy_to_hs,
 )
 
-if TYPE_CHECKING:
-    import astral
 
-# Same as homeassistant.const.SUN_EVENT_SUNRISE and homeassistant.const.SUN_EVENT_SUNSET
-# We re-define them here to not depend on homeassistant in this file.
-SUN_EVENT_SUNRISE = "sunrise"
-SUN_EVENT_SUNSET = "sunset"
+class SunEvent(str, Enum):
+    """A set of sun events that happen during a day."""
 
-SUN_EVENT_NOON = "solar_noon"
-SUN_EVENT_MIDNIGHT = "solar_midnight"
+    # Same as homeassistant.const.SUN_EVENT_SUNRISE and homeassistant.const.SUN_EVENT_SUNSET
+    # We re-define them here to not depend on homeassistant in this file.
+    SUNRISE = "sunrise"
+    SUNSET = "sunset"
+    NOON = "solar_noon"
+    MIDNIGHT = "solar_midnight"
 
-_ORDER = (SUN_EVENT_SUNRISE, SUN_EVENT_NOON, SUN_EVENT_SUNSET, SUN_EVENT_MIDNIGHT)
+
+_ORDER = (SunEvent.SUNRISE, SunEvent.NOON, SunEvent.SUNSET, SunEvent.MIDNIGHT)
 _ALLOWED_ORDERS = {_ORDER[i:] + _ORDER[:i] for i in range(len(_ORDER))}
 
-UTC = datetime.timezone.utc
+# On polar days without a sunrise/sunset, synthetic sun events are placed this
+# far from solar noon (polar night) or solar midnight (midnight sun), giving a
+# 1-hour synthetic "day" or "night" so the adaptation cycle keeps working.
+_POLAR_SUN_EVENT_OFFSET = timedelta(minutes=30)
+_POLAR_SUN_EVENT_EPSILON = timedelta(seconds=1)
+
 utcnow: partial[datetime.datetime] = partial(datetime.datetime.now, UTC)
 utcnow.__doc__ = "Get now in UTC time."
 
@@ -43,7 +52,7 @@ class SunEvents:
     """Track the state of the sun and associated light settings."""
 
     name: str
-    astral_location: astral.Location
+    astral_observer: astral.Observer
     sunrise_time: datetime.time | None
     min_sunrise_time: datetime.time | None
     max_sunrise_time: datetime.time | None
@@ -54,38 +63,98 @@ class SunEvents:
     sunset_offset: datetime.timedelta = datetime.timedelta()
     timezone: datetime.tzinfo = UTC
 
+    def _astral_sunrise_or_sunset(
+        self,
+        dt: datetime.date,
+        event: Literal[SunEvent.SUNRISE, SunEvent.SUNSET],
+        offset: datetime.timedelta,
+    ) -> datetime.datetime:
+        """Return the astral sunrise/sunset, with a fallback for polar regions.
+
+        Above the polar circle the sun never crosses the horizon during polar
+        night and midnight sun, and `astral` raises a `ValueError` (see #1485).
+        On such days, synthesize a 1-hour "day" around solar noon (polar night)
+        or a 1-hour "night" around solar midnight (midnight sun), so the
+        adaptation cycle keeps working. The `(min/max)_(sunrise/sunset)_time`
+        options are applied on top of these synthetic times and can be used to
+        shape the resulting schedule. Configured offsets are limited to the
+        surrounding solar midnight/noon interval so they cannot invert the
+        required event order.
+        """
+        astral_event = (
+            astral.sun.sunrise if event == SunEvent.SUNRISE else astral.sun.sunset
+        )
+        try:
+            return astral_event(self.astral_observer, dt) + offset
+        except ValueError:
+            noon = astral.sun.noon(self.astral_observer, dt)
+            midnight = astral.sun.midnight(self.astral_observer, dt)
+            next_midnight = astral.sun.midnight(
+                self.astral_observer,
+                dt + timedelta(days=1),
+            )
+            noon_elevation = astral.sun.elevation(self.astral_observer, noon)
+            midnight_elevation = astral.sun.elevation(self.astral_observer, midnight)
+            # The sum of the sun's highest and lowest elevation of the day is
+            # ≈2x the solar declination, so its sign robustly distinguishes
+            # midnight sun from polar night, even on the boundary days where
+            # one elevation hovers around the horizon.
+            if noon_elevation + midnight_elevation > 0:
+                # Midnight sun: the sun stays above the horizon all day.
+                synthetic = (
+                    midnight + _POLAR_SUN_EVENT_OFFSET
+                    if event == SunEvent.SUNRISE
+                    else next_midnight - _POLAR_SUN_EVENT_OFFSET
+                )
+            else:
+                # Polar night: the sun stays below the horizon all day.
+                sign = -1 if event == SunEvent.SUNRISE else 1
+                synthetic = noon + sign * _POLAR_SUN_EVENT_OFFSET
+
+            lower, upper = (
+                (midnight, noon) if event == SunEvent.SUNRISE else (noon, next_midnight)
+            )
+            return min(
+                max(synthetic + offset, lower + _POLAR_SUN_EVENT_EPSILON),
+                upper - _POLAR_SUN_EVENT_EPSILON,
+            )
+
     def sunrise(self, dt: datetime.date) -> datetime.datetime:
         """Return the (adjusted) sunrise time for the given datetime."""
         sunrise = (
-            self.astral_location.sunrise(dt, local=False)
+            self._astral_sunrise_or_sunset(
+                dt,
+                SunEvent.SUNRISE,
+                self.sunrise_offset,
+            )
             if self.sunrise_time is None
-            else self._replace_time(dt, self.sunrise_time)
-        ) + self.sunrise_offset
+            else self._replace_time(dt, self.sunrise_time) + self.sunrise_offset
+        )
         if self.min_sunrise_time is not None:
             min_sunrise = self._replace_time(dt, self.min_sunrise_time)
-            if min_sunrise > sunrise:
-                sunrise = min_sunrise
+            sunrise = max(min_sunrise, sunrise)
         if self.max_sunrise_time is not None:
             max_sunrise = self._replace_time(dt, self.max_sunrise_time)
-            if max_sunrise < sunrise:
-                sunrise = max_sunrise
+            sunrise = min(max_sunrise, sunrise)
         return sunrise
 
     def sunset(self, dt: datetime.date) -> datetime.datetime:
         """Return the (adjusted) sunset time for the given datetime."""
         sunset = (
-            self.astral_location.sunset(dt, local=False)
+            self._astral_sunrise_or_sunset(
+                dt,
+                SunEvent.SUNSET,
+                self.sunset_offset,
+            )
             if self.sunset_time is None
-            else self._replace_time(dt, self.sunset_time)
-        ) + self.sunset_offset
+            else self._replace_time(dt, self.sunset_time) + self.sunset_offset
+        )
         if self.min_sunset_time is not None:
             min_sunset = self._replace_time(dt, self.min_sunset_time)
-            if min_sunset > sunset:
-                sunset = min_sunset
+            sunset = max(min_sunset, sunset)
         if self.max_sunset_time is not None:
             max_sunset = self._replace_time(dt, self.max_sunset_time)
-            if max_sunset < sunset:
-                sunset = max_sunset
+            sunset = min(max_sunset, sunset)
         return sunset
 
     def _replace_time(
@@ -112,8 +181,8 @@ class SunEvents:
             and self.min_sunset_time is None
             and self.max_sunset_time is None
         ):
-            solar_noon = self.astral_location.noon(dt, local=False)
-            solar_midnight = self.astral_location.midnight(dt, local=False)
+            solar_noon = astral.sun.noon(self.astral_observer, dt)
+            solar_midnight = astral.sun.midnight(self.astral_observer, dt)
             return solar_noon, solar_midnight
 
         if sunset is None:
@@ -130,21 +199,21 @@ class SunEvents:
             noon = midnight + timedelta(hours=12) * (1 if midnight.hour < 12 else -1)
         return noon, midnight
 
-    def sun_events(self, dt: datetime.datetime) -> list[tuple[str, float]]:
+    def sun_events(self, dt: datetime.datetime) -> list[tuple[SunEvent, float]]:
         """Get the four sun event's timestamps at 'dt'."""
         sunrise = self.sunrise(dt)
         sunset = self.sunset(dt)
         solar_noon, solar_midnight = self.noon_and_midnight(dt, sunset, sunrise)
-        events = [
-            (SUN_EVENT_SUNRISE, sunrise.timestamp()),
-            (SUN_EVENT_SUNSET, sunset.timestamp()),
-            (SUN_EVENT_NOON, solar_noon.timestamp()),
-            (SUN_EVENT_MIDNIGHT, solar_midnight.timestamp()),
+        events: list[tuple[SunEvent, float]] = [
+            (SunEvent.SUNRISE, sunrise.timestamp()),
+            (SunEvent.SUNSET, sunset.timestamp()),
+            (SunEvent.NOON, solar_noon.timestamp()),
+            (SunEvent.MIDNIGHT, solar_midnight.timestamp()),
         ]
         self._validate_sun_event_order(events)
         return events
 
-    def _validate_sun_event_order(self, events: list[tuple[str, float]]) -> None:
+    def _validate_sun_event_order(self, events: list[tuple[SunEvent, float]]) -> None:
         """Check if the sun events are in the expected order."""
         events = sorted(events, key=lambda x: x[1])
         events_names, _ = zip(*events, strict=True)
@@ -158,7 +227,10 @@ class SunEvents:
             _LOGGER.error(msg)
             raise ValueError(msg)
 
-    def prev_and_next_events(self, dt: datetime.datetime) -> list[tuple[str, float]]:
+    def prev_and_next_events(
+        self,
+        dt: datetime.datetime,
+    ) -> list[tuple[SunEvent, float]]:
         """Get the previous and next sun event."""
         events = [
             event
@@ -175,23 +247,26 @@ class SunEvents:
         (_, prev_ts), (next_event, next_ts) = self.prev_and_next_events(dt)
         h, x = (
             (prev_ts, next_ts)
-            if next_event in (SUN_EVENT_SUNSET, SUN_EVENT_SUNRISE)
+            if next_event in (SunEvent.SUNSET, SunEvent.SUNRISE)
             else (next_ts, prev_ts)
         )
         # k = -1 between sunset and sunrise (sun below horizon)
         # k = 1 between sunrise and sunset (sun above horizon)
-        k = 1 if next_event in (SUN_EVENT_SUNSET, SUN_EVENT_NOON) else -1
+        k = 1 if next_event in (SunEvent.SUNSET, SunEvent.NOON) else -1
         return k * (1 - ((target_ts - h) / (h - x)) ** 2)
 
-    def closest_event(self, dt: datetime.datetime) -> tuple[str, float]:
+    def closest_event(
+        self,
+        dt: datetime.datetime,
+    ) -> tuple[Literal[SunEvent.SUNRISE, SunEvent.SUNSET], float]:
         """Get the closest sunset or sunrise event."""
         (prev_event, prev_ts), (next_event, next_ts) = self.prev_and_next_events(dt)
-        if prev_event == SUN_EVENT_SUNRISE or next_event == SUN_EVENT_SUNRISE:
-            ts_event = prev_ts if prev_event == SUN_EVENT_SUNRISE else next_ts
-            return SUN_EVENT_SUNRISE, ts_event
-        if prev_event == SUN_EVENT_SUNSET or next_event == SUN_EVENT_SUNSET:
-            ts_event = prev_ts if prev_event == SUN_EVENT_SUNSET else next_ts
-            return SUN_EVENT_SUNSET, ts_event
+        if SunEvent.SUNRISE in (prev_event, next_event):
+            ts_event = prev_ts if prev_event == SunEvent.SUNRISE else next_ts
+            return SunEvent.SUNRISE, ts_event
+        if SunEvent.SUNSET in (prev_event, next_event):
+            ts_event = prev_ts if prev_event == SunEvent.SUNSET else next_ts
+            return SunEvent.SUNSET, ts_event
         msg = "No sunrise or sunset event found."
         raise ValueError(msg)
 
@@ -201,7 +276,7 @@ class SunLightSettings:
     """Track the state of the sun and associated light settings."""
 
     name: str
-    astral_location: astral.Location
+    astral_observer: astral.Observer
     adapt_until_sleep: bool
     max_brightness: int
     max_color_temp: int
@@ -229,7 +304,7 @@ class SunLightSettings:
         """Return the SunEvents object."""
         return SunEvents(
             name=self.name,
-            astral_location=self.astral_location,
+            astral_observer=self.astral_observer,
             sunrise_time=self.sunrise_time,
             sunrise_offset=self.sunrise_offset,
             min_sunrise_time=self.min_sunrise_time,
@@ -253,7 +328,7 @@ class SunLightSettings:
         event, ts_event = self.sun.closest_event(dt)
         dark = self.brightness_mode_time_dark.total_seconds()
         light = self.brightness_mode_time_light.total_seconds()
-        if event == SUN_EVENT_SUNRISE:
+        if event == SunEvent.SUNRISE:
             brightness = scaled_tanh(
                 dt.timestamp() - ts_event,
                 x1=-dark,
@@ -263,7 +338,7 @@ class SunLightSettings:
                 y_min=self.min_brightness,
                 y_max=self.max_brightness,
             )
-        elif event == SUN_EVENT_SUNSET:
+        elif event == SunEvent.SUNSET:
             brightness = scaled_tanh(
                 dt.timestamp() - ts_event,
                 x1=-light,  # shifted timestamp for the start of sunset
@@ -273,6 +348,9 @@ class SunLightSettings:
                 y_min=self.min_brightness,
                 y_max=self.max_brightness,
             )
+        else:
+            msg = "Unsupported sun event"
+            raise ValueError(msg)
         return clamp(brightness, self.min_brightness, self.max_brightness)
 
     def _brightness_pct_linear(self, dt: datetime.datetime) -> float:
@@ -281,7 +359,7 @@ class SunLightSettings:
         # at ts_event + dt_end, brightness == end_brightness
         dark = self.brightness_mode_time_dark.total_seconds()
         light = self.brightness_mode_time_light.total_seconds()
-        if event == SUN_EVENT_SUNRISE:
+        if event == SunEvent.SUNRISE:
             brightness = lerp(
                 dt.timestamp() - ts_event,
                 x1=-dark,
@@ -289,7 +367,7 @@ class SunLightSettings:
                 y1=self.min_brightness,
                 y2=self.max_brightness,
             )
-        elif event == SUN_EVENT_SUNSET:
+        elif event == SunEvent.SUNSET:
             brightness = lerp(
                 dt.timestamp() - ts_event,
                 x1=-light,
@@ -297,9 +375,12 @@ class SunLightSettings:
                 y1=self.max_brightness,
                 y2=self.min_brightness,
             )
+        else:
+            msg = "Unsupported sun event"
+            raise ValueError(msg)
         return clamp(brightness, self.min_brightness, self.max_brightness)
 
-    def brightness_pct(self, dt: datetime.datetime, is_sleep: bool) -> float:
+    def brightness_pct(self, dt: datetime.datetime, is_sleep: bool) -> float | None:
         """Calculate the brightness in %."""
         if is_sleep:
             return self.sleep_brightness
@@ -334,7 +415,7 @@ class SunLightSettings:
     ) -> dict[str, Any]:
         """Calculate the brightness and color."""
         sun_position = self.sun.sun_position(dt)
-        rgb_color: tuple[float, float, float]
+        rgb_color: tuple[int, int, int]
         # Variable `force_rgb_color` is needed for RGB color after sunset (if enabled)
         force_rgb_color = False
         brightness_pct = self.brightness_pct(dt, is_sleep)
@@ -360,7 +441,8 @@ class SunLightSettings:
             force_rgb_color = True
         else:
             color_temp_kelvin = self.color_temp_kelvin(sun_position)
-            rgb_color = color_temperature_to_rgb(color_temp_kelvin)
+            r, g, b = color_temperature_to_rgb(color_temp_kelvin)
+            rgb_color = (round(r), round(g), round(b))
         # backwards compatibility for versions < 1.3.1 - see #403
         color_temp_mired: float = math.floor(1000000 / color_temp_kelvin)
         xy_color: tuple[float, float] = color_RGB_to_xy(*rgb_color)
@@ -378,8 +460,8 @@ class SunLightSettings:
 
     def get_settings(
         self,
-        is_sleep,
-        transition,
+        is_sleep: bool,
+        transition: float | None,
     ) -> dict[str, float | int | tuple[float, float] | tuple[float, float, float]]:
         """Get all light settings.
 
@@ -432,6 +514,7 @@ def find_a_b(x1: float, x2: float, y1: float, y2: float) -> tuple[float, float]:
     Notes
     -----
     The values of y1 and y2 should lie between 0 and 1, inclusive.
+
     """
     a = (math.atanh(2 * y2 - 1) - math.atanh(2 * y1 - 1)) / (x2 - x1)
     b = x1 - (math.atanh(2 * y1 - 1) / a)
@@ -477,6 +560,7 @@ def scaled_tanh(
     Returns
     -------
         float: The output of the function, which lies in the range [y_min, y_max].
+
     """
     a, b = find_a_b(x1, x2, y1, y2)
     return y_min + (y_max - y_min) * 0.5 * (math.tanh(a * (x - b)) + 1)
@@ -503,16 +587,24 @@ def lerp_color_hsv(
     )
 
     # Convert back to RGB
-    rgb = tuple(int(round(x * 255)) for x in colorsys.hsv_to_rgb(*hsv))
+    rgb = tuple(round(x * 255) for x in colorsys.hsv_to_rgb(*hsv))
     assert all(0 <= x <= 255 for x in rgb), f"Invalid RGB color: {rgb}"
-    return cast(tuple[int, int, int], rgb)
+    return cast("tuple[int, int, int]", rgb)
 
 
-def lerp(x, x1, x2, y1, y2):
+def lerp(x: float, x1: float, x2: float, y1: float, y2: float) -> float:
     """Linearly interpolate between two values."""
     return y1 + (x - x1) * (y2 - y1) / (x2 - x1)
 
 
 def clamp(value: float, minimum: float, maximum: float) -> float:
-    """Clamp value between minimum and maximum."""
-    return max(minimum, min(value, maximum))
+    """Clamp value between minimum and maximum.
+
+    `minimum` is not assumed to be <= `maximum`: a user may intentionally
+    configure `min_brightness > max_brightness` (or the equivalent for color
+    temperature) for an inverted timescale (#1421). Sort the bounds first so
+    that case clamps against the real lower/upper bound instead of
+    collapsing to `minimum` for every input.
+    """
+    low, high = (minimum, maximum) if minimum <= maximum else (maximum, minimum)
+    return max(low, min(value, high))

custom_components/adaptive_lighting/config_flow.py

@@ -1,37 +1,81 @@
 """Config flow for Adaptive Lighting integration."""
-import logging
 
-import homeassistant.helpers.config_validation as cv
+import logging
+from typing import Any
+
 import voluptuous as vol
-from homeassistant import config_entries
+from homeassistant import config_entries, data_entry_flow
 from homeassistant.const import CONF_NAME
 from homeassistant.core import callback
+from homeassistant.helpers.selector import EntitySelector, EntitySelectorConfig
 
 from .const import (  # pylint: disable=unused-import
+    BASIC_OPTIONS,
     CONF_LIGHTS,
     DOMAIN,
     EXTRA_VALIDATION,
     NONE_STR,
     VALIDATION_TUPLES,
 )
-from .switch import _supported_features, validate
+from .switch import validate
 
 _LOGGER = logging.getLogger(__name__)
 
+OPTIONS_FLOW_DESCRIPTION_PLACEHOLDERS = {
+    "webapp_url": "https://basnijholt.github.io/adaptive-lighting",
+    "docs_url": "https://github.com/basnijholt/adaptive-lighting#readme",
+}
+ADVANCED_OPTIONS_SECTION = "advanced"
+
 
 class ConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
     """Handle a config flow for Adaptive Lighting."""
 
     VERSION = 1
 
-    async def async_step_user(self, user_input=None):
+    source_options: dict[str, Any] | None = None
+
+    async def async_step_user(self, user_input: dict[str, Any] | None = None):
         """Handle the initial step."""
-        errors = {}
+        if user_input is None and self._async_current_entries():
+            return await self.async_step_menu()
+        return await self.async_step_wait_for_name(user_input)
+
+    async def async_step_menu(self, user_input: dict[str, Any] | None = None):
+        """Handle the menu step."""
+        if user_input is not None:
+            if user_input["action"] != "new":
+                entry_id = user_input["action"]
+                entry = self.hass.config_entries.async_get_entry(entry_id)
+                if entry:
+                    self.source_options = dict(entry.options)
+            return await self.async_step_wait_for_name()
+
+        entries = self._async_current_entries()
+        options = {"new": "Create new instance"}
+        for entry in entries:
+            options[entry.entry_id] = f"Duplicate '{entry.title}'"
+
+        return self.async_show_form(
+            step_id="menu",
+            data_schema=vol.Schema(
+                {vol.Required("action", default="new"): vol.In(options)},
+            ),
+        )
+
+    async def async_step_wait_for_name(self, user_input: dict[str, Any] | None = None):
+        """Handle the name step."""
+        errors: dict[str, str] = {}
 
         if user_input is not None:
             await self.async_set_unique_id(user_input[CONF_NAME])
             self._abort_if_unique_id_configured()
-            return self.async_create_entry(title=user_input[CONF_NAME], data=user_input)
+            options = self.source_options
+            return self.async_create_entry(
+                title=user_input[CONF_NAME],
+                data=user_input,
+                options=options,
+            )
 
         return self.async_show_form(
             step_id="user",
@@ -39,8 +83,11 @@ class ConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
             errors=errors,
         )
 
-    async def async_step_import(self, user_input=None):
+    async def async_step_import(self, user_input: dict[str, Any] | None = None):
         """Handle configuration by YAML file."""
+        if user_input is None:
+            return self.async_abort(reason="no_data")
+
         await self.async_set_unique_id(user_input[CONF_NAME])
         # Keep a list of switches that are configured via YAML
         data = self.hass.data.setdefault(DOMAIN, {})
@@ -55,12 +102,14 @@ class ConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
 
     @staticmethod
     @callback
-    def async_get_options_flow(config_entry):
+    def async_get_options_flow(
+        config_entry: config_entries.ConfigEntry,  # noqa: ARG004
+    ) -> "OptionsFlowHandler":
         """Get the options flow for this handler."""
-        return OptionsFlowHandler(config_entry)
+        return OptionsFlowHandler()
 
 
-def validate_options(user_input, errors):
+def validate_options(user_input: dict[str, Any], errors: dict[str, str]) -> None:
     """Validate the options in the OptionsFlow.
 
     This is an extra validation step because the validators
@@ -80,46 +129,74 @@ def validate_options(user_input, errors):
 class OptionsFlowHandler(config_entries.OptionsFlow):
     """Handle a option flow for Adaptive Lighting."""
 
-    def __init__(self, config_entry: config_entries.ConfigEntry) -> None:
-        """Initialize options flow."""
-        self.config_entry = config_entry
+    def _flatten_section_input(self, user_input: dict[str, Any]) -> dict[str, Any]:
+        """Flatten section input by merging nested 'advanced' dict into top level."""
+        flat_input: dict[str, Any] = {}
+        for key, value in user_input.items():
+            if key == ADVANCED_OPTIONS_SECTION and isinstance(value, dict):
+                flat_input.update(value)
+            else:
+                flat_input[key] = value
+        return flat_input
 
-    async def async_step_init(self, user_input=None):
-        """Handle options flow."""
+    async def async_step_init(self, user_input: dict[str, Any] | None = None):
+        """Handle options flow with collapsible sections."""
         conf = self.config_entry
         data = validate(conf)
+        form_data = {**conf.data, **conf.options}
         if conf.source == config_entries.SOURCE_IMPORT:
-            return self.async_show_form(step_id="init", data_schema=None)
-        errors = {}
+            return self.async_show_form(
+                step_id="init",
+                data_schema=None,
+                description_placeholders=OPTIONS_FLOW_DESCRIPTION_PLACEHOLDERS,
+            )
+        errors: dict[str, str] = {}
         if user_input is not None:
-            validate_options(user_input, errors)
+            flat_input = self._flatten_section_input(user_input)
+            validate_options(flat_input, errors)
             if not errors:
-                return self.async_create_entry(title="", data=user_input)
+                return self.async_create_entry(title="", data=flat_input)
+            data.update(flat_input)
+            form_data.update(flat_input)
 
-        all_lights = [
-            light
-            for light in self.hass.states.async_entity_ids("light")
-            if _supported_features(self.hass, light)
-        ]
+        # Validate that all configured lights still exist
+        all_lights = set(self.hass.states.async_entity_ids("light"))
         for configured_light in data[CONF_LIGHTS]:
             if configured_light not in all_lights:
-                errors = {CONF_LIGHTS: "entity_missing"}
+                errors[CONF_LIGHTS] = "entity_missing"
                 _LOGGER.error(
                     "%s: light entity %s is configured, but was not found",
                     data[CONF_NAME],
                     configured_light,
                 )
-                all_lights.append(configured_light)
-        to_replace = {CONF_LIGHTS: cv.multi_select(sorted(all_lights))}
 
-        options_schema = {}
+        to_replace: dict[str, Any] = {
+            CONF_LIGHTS: EntitySelector(
+                EntitySelectorConfig(
+                    domain="light",
+                    multiple=True,
+                ),
+            ),
+        }
+
+        basic_schema: dict[vol.Marker, Any] = {}
+        advanced_schema: dict[vol.Marker, Any] = {}
         for name, default, validation in VALIDATION_TUPLES:
-            key = vol.Optional(name, default=conf.options.get(name, default))
-            value = to_replace.get(name, validation)
-            options_schema[key] = value
+            key = vol.Optional(name, default=form_data.get(name, default))
+            schema = basic_schema if name in BASIC_OPTIONS else advanced_schema
+            schema[key] = to_replace.get(name, validation)
+
+        full_schema = {
+            **basic_schema,
+            vol.Required(ADVANCED_OPTIONS_SECTION): data_entry_flow.section(
+                vol.Schema(advanced_schema),
+                data_entry_flow.SectionConfig(collapsed=True),
+            ),
+        }
 
         return self.async_show_form(
             step_id="init",
-            data_schema=vol.Schema(options_schema),
+            data_schema=vol.Schema(full_schema),
             errors=errors,
+            description_placeholders=OPTIONS_FLOW_DESCRIPTION_PLACEHOLDERS,
         )

custom_components/adaptive_lighting/const.py

@@ -1,5 +1,9 @@
 """Constants for the Adaptive Lighting integration."""
 
+from datetime import timedelta
+from enum import Enum
+from typing import Any
+
 import homeassistant.helpers.config_validation as cv
 import voluptuous as vol
 from homeassistant.components.light import VALID_TRANSITION
@@ -13,6 +17,14 @@ ICON_SLEEP = "mdi:sleep"
 
 DOMAIN = "adaptive_lighting"
 
+
+class TakeOverControlMode(Enum):
+    """Modes for pausing adaptation when control of a light is taken over externally."""
+
+    PAUSE_ALL = "pause_all"
+    PAUSE_CHANGED = "pause_changed"
+
+
 DOCS = {CONF_ENTITY_ID: "Entity ID of the switch. 📝"}
 
 
@@ -31,6 +43,7 @@ DOCS[CONF_DETECT_NON_HA_CHANGES] = (
     "Needs `take_over_control` enabled. 🕵️ "
     "Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result "
     "in lights turning on unexpectedly. "
+    "Note that this calls `homeassistant.update_entity` every `interval`! "
     "Disable this feature if you encounter such issues."
 )
 
@@ -50,9 +63,9 @@ DOCS[CONF_INITIAL_TRANSITION] = (
 )
 
 CONF_SLEEP_TRANSITION, DEFAULT_SLEEP_TRANSITION = "sleep_transition", 1
-DOCS[
-    CONF_SLEEP_TRANSITION
-] = 'Duration of transition when "sleep mode" is toggled in seconds. 😴'
+DOCS[CONF_SLEEP_TRANSITION] = (
+    'Duration of transition when "sleep mode" is toggled in seconds. 😴'
+)
 
 CONF_INTERVAL, DEFAULT_INTERVAL = "interval", 90
 DOCS[CONF_INTERVAL] = "Frequency to adapt the lights, in seconds. 🔄"
@@ -82,9 +95,19 @@ CONF_ADAPT_ONLY_ON_BARE_TURN_ON, DEFAULT_ADAPT_ONLY_ON_BARE_TURN_ON = (
 DOCS[CONF_ADAPT_ONLY_ON_BARE_TURN_ON] = (
     "When turning lights on initially. If set to `true`, AL adapts only if `light.turn_on` is "
     "invoked without specifying color or brightness. ❌🌈 "
-    "This e.g., prevents adaptation when activating a scene. "
+    "This e.g., prevents adaptation when activating a scene and marks the light as manually controlled. "
     "If `false`, AL adapts regardless of the presence of color or brightness in the initial `service_data`. "
-    "Needs `take_over_control` enabled. 🕵️ "
+    "Needs `take_over_control` enabled. 🕵️"
+)
+
+CONF_MANUAL_CONTROL_ON_EXTERNAL_TURN_ON, DEFAULT_MANUAL_CONTROL_ON_EXTERNAL_TURN_ON = (
+    "manual_control_on_external_turn_on",
+    False,
+)
+DOCS[CONF_MANUAL_CONTROL_ON_EXTERNAL_TURN_ON] = (
+    "Treat turn-ons without a matching Home Assistant `light.turn_on` context as "
+    "manual control. Normal manual-control resets apply. Still allows "
+    "`detect_non_ha_changes` for already-on lights. Needs `take_over_control` enabled. 🕵️"
 )
 
 CONF_PREFER_RGB_COLOR, DEFAULT_PREFER_RGB_COLOR = "prefer_rgb_color", False
@@ -112,30 +135,30 @@ DOCS[CONF_SLEEP_COLOR_TEMP] = (
 )
 
 CONF_SLEEP_RGB_COLOR, DEFAULT_SLEEP_RGB_COLOR = "sleep_rgb_color", [255, 56, 0]
-DOCS[
-    CONF_SLEEP_RGB_COLOR
-] = 'RGB color in sleep mode (used when `sleep_rgb_or_color_temp` is "rgb_color"). 🌈'
+DOCS[CONF_SLEEP_RGB_COLOR] = (
+    'RGB color in sleep mode (used when `sleep_rgb_or_color_temp` is "rgb_color"). 🌈'
+)
 
 CONF_SLEEP_RGB_OR_COLOR_TEMP, DEFAULT_SLEEP_RGB_OR_COLOR_TEMP = (
     "sleep_rgb_or_color_temp",
     "color_temp",
 )
-DOCS[
-    CONF_SLEEP_RGB_OR_COLOR_TEMP
-] = 'Use either `"rgb_color"` or `"color_temp"` in sleep mode. 🌙'
+DOCS[CONF_SLEEP_RGB_OR_COLOR_TEMP] = (
+    'Use either `"rgb_color"` or `"color_temp"` in sleep mode. 🌙'
+)
 
 CONF_SUNRISE_OFFSET, DEFAULT_SUNRISE_OFFSET = "sunrise_offset", 0
-DOCS[
-    CONF_SUNRISE_OFFSET
-] = "Adjust sunrise time with a positive or negative offset in seconds. ⏰"
+DOCS[CONF_SUNRISE_OFFSET] = (
+    "Adjust sunrise time with a positive or negative offset in seconds. ⏰"
+)
 
 CONF_SUNRISE_TIME = "sunrise_time"
 DOCS[CONF_SUNRISE_TIME] = "Set a fixed time (HH:MM:SS) for sunrise. 🌅"
 
 CONF_MIN_SUNRISE_TIME = "min_sunrise_time"
-DOCS[
-    CONF_MIN_SUNRISE_TIME
-] = "Set the earliest virtual sunrise time (HH:MM:SS), allowing for later sunrises. 🌅"
+DOCS[CONF_MIN_SUNRISE_TIME] = (
+    "Set the earliest virtual sunrise time (HH:MM:SS), allowing for later sunrises. 🌅"
+)
 
 CONF_MAX_SUNRISE_TIME = "max_sunrise_time"
 DOCS[CONF_MAX_SUNRISE_TIME] = (
@@ -144,22 +167,22 @@ DOCS[CONF_MAX_SUNRISE_TIME] = (
 )
 
 CONF_SUNSET_OFFSET, DEFAULT_SUNSET_OFFSET = "sunset_offset", 0
-DOCS[
-    CONF_SUNSET_OFFSET
-] = "Adjust sunset time with a positive or negative offset in seconds. ⏰"
+DOCS[CONF_SUNSET_OFFSET] = (
+    "Adjust sunset time with a positive or negative offset in seconds. ⏰"
+)
 
 CONF_SUNSET_TIME = "sunset_time"
 DOCS[CONF_SUNSET_TIME] = "Set a fixed time (HH:MM:SS) for sunset. 🌇"
 
 CONF_MIN_SUNSET_TIME = "min_sunset_time"
-DOCS[
-    CONF_MIN_SUNSET_TIME
-] = "Set the earliest virtual sunset time (HH:MM:SS), allowing for later sunsets. 🌇"
+DOCS[CONF_MIN_SUNSET_TIME] = (
+    "Set the earliest virtual sunset time (HH:MM:SS), allowing for later sunsets. 🌇"
+)
 
 CONF_MAX_SUNSET_TIME = "max_sunset_time"
-DOCS[
-    CONF_MAX_SUNSET_TIME
-] = "Set the latest virtual sunset time (HH:MM:SS), allowing for earlier sunsets. 🌇"
+DOCS[CONF_MAX_SUNSET_TIME] = (
+    "Set the latest virtual sunset time (HH:MM:SS), allowing for earlier sunsets. 🌇"
+)
 
 CONF_BRIGHTNESS_MODE, DEFAULT_BRIGHTNESS_MODE = "brightness_mode", "default"
 DOCS[CONF_BRIGHTNESS_MODE] = (
@@ -185,9 +208,19 @@ DOCS[CONF_BRIGHTNESS_MODE_TIME_LIGHT] = (
 
 CONF_TAKE_OVER_CONTROL, DEFAULT_TAKE_OVER_CONTROL = "take_over_control", True
 DOCS[CONF_TAKE_OVER_CONTROL] = (
-    "Disable Adaptive Lighting if another source calls `light.turn_on` while lights "
-    "are on and being adapted. Note that this calls `homeassistant.update_entity` "
-    "every `interval`! 🔒"
+    "Pause adaptation of individual lights and hand over (manual) control to other sources that "
+    "issue `light.turn_on` calls for lights that are on. 🔒"
+)
+
+CONF_TAKE_OVER_CONTROL_MODE, DEFAULT_TAKE_OVER_CONTROL_MODE = (
+    "take_over_control_mode",
+    TakeOverControlMode.PAUSE_ALL.value,
+)
+DOCS[CONF_TAKE_OVER_CONTROL_MODE] = (
+    "The adaptation pausing mode when other sources change brightness and/or color of lights. "
+    "`pause_all` always pauses both brightness and color adaptation. "
+    "`pause_changed` pauses the adaptation of only the changed attributes and continues adapting "
+    "unchanged attributes, e.g., continues color adaptation when only brightness was changed."
 )
 
 CONF_TRANSITION, DEFAULT_TRANSITION = "transition", 45
@@ -220,6 +253,15 @@ DOCS[CONF_AUTORESET_CONTROL] = (
     "Set to 0 to disable. ⏲️"
 )
 
+(
+    CONF_RESET_MANUAL_CONTROL_ON_SLEEP_MODE_CHANGE,
+    DEFAULT_RESET_MANUAL_CONTROL_ON_SLEEP_MODE_CHANGE,
+) = ("reset_manual_control_on_sleep_mode_change", True)
+DOCS[CONF_RESET_MANUAL_CONTROL_ON_SLEEP_MODE_CHANGE] = (
+    "Reset manual control when the sleep mode switch is toggled. "
+    "Set to `false` to preserve manual control across sleep mode changes. 😴"
+)
+
 CONF_SKIP_REDUNDANT_COMMANDS, DEFAULT_SKIP_REDUNDANT_COMMANDS = (
     "skip_redundant_commands",
     False,
@@ -249,6 +291,14 @@ DOCS[CONF_MULTI_LIGHT_INTERCEPT] = (
     "Requires `intercept` to be enabled."
 )
 
+CONF_EXPAND_LIGHT_GROUPS, DEFAULT_EXPAND_LIGHT_GROUPS = "expand_light_groups", True
+DOCS[CONF_EXPAND_LIGHT_GROUPS] = (
+    "Expand light groups to their members (`true`, default). Set `false` to send "
+    "commands to the group and track manual control for the group. Explicit member "
+    "targets in services stay individual targets."
+)
+
+
 SLEEP_MODE_SWITCH = "sleep_mode_switch"
 ADAPT_COLOR_SWITCH = "adapt_color_switch"
 ADAPT_BRIGHTNESS_SWITCH = "adapt_brightness_switch"
@@ -281,8 +331,9 @@ DOCS_MANUAL_CONTROL = {
     "light as being `manually controlled`. 📝",
     CONF_LIGHTS: "entity_id(s) of lights, if not specified, all lights in the "
     "switch are selected. 💡",
-    CONF_MANUAL_CONTROL: 'Whether to add ("true") or remove ("false") the '
-    'light from the "manual_control" list. 🔒',
+    CONF_MANUAL_CONTROL: 'Whether to add ("true") or remove ("false") all '
+    'adapted attributes of the light from the "manual_control" list, or the '
+    "name of an attribute for selective addition. 🔒",
 }
 
 DOCS_APPLY = {
@@ -290,14 +341,27 @@ DOCS_APPLY = {
     CONF_LIGHTS: "A light (or list of lights) to apply the settings to. 💡",
 }
 
+# Basic options shown at top level in options flow (not in collapsed section)
+BASIC_OPTIONS: set[str] = {
+    CONF_LIGHTS,
+    CONF_MIN_BRIGHTNESS,
+    CONF_MAX_BRIGHTNESS,
+    CONF_MIN_COLOR_TEMP,
+    CONF_MAX_COLOR_TEMP,
+    CONF_SLEEP_BRIGHTNESS,
+    CONF_SLEEP_COLOR_TEMP,
+    CONF_TRANSITION,
+    CONF_INTERVAL,
+}
 
-def int_between(min_int, max_int):
+
+def int_between(min_int: int, max_int: int) -> vol.All:
     """Return an integer between 'min_int' and 'max_int'."""
     return vol.All(vol.Coerce(int), vol.Range(min=min_int, max=max_int))
 
 
-VALIDATION_TUPLES = [
-    (CONF_LIGHTS, DEFAULT_LIGHTS, cv.entity_ids),
+VALIDATION_TUPLES: list[tuple[str, Any, Any]] = [
+    (CONF_LIGHTS, DEFAULT_LIGHTS, cv.entity_ids),  # type: ignore[arg-type]
     (CONF_INTERVAL, DEFAULT_INTERVAL, cv.positive_int),
     (CONF_TRANSITION, DEFAULT_TRANSITION, VALID_TRANSITION),
     (CONF_INITIAL_TRANSITION, DEFAULT_INITIAL_TRANSITION, VALID_TRANSITION),
@@ -310,7 +374,7 @@ VALIDATION_TUPLES = [
     (
         CONF_SLEEP_RGB_OR_COLOR_TEMP,
         DEFAULT_SLEEP_RGB_OR_COLOR_TEMP,
-        selector.SelectSelector(
+        selector.SelectSelector(  # type: ignore[arg-type]
             selector.SelectSelectorConfig(
                 options=["color_temp", "rgb_color"],
                 multiple=False,
@@ -322,7 +386,7 @@ VALIDATION_TUPLES = [
     (
         CONF_SLEEP_RGB_COLOR,
         DEFAULT_SLEEP_RGB_COLOR,
-        selector.ColorRGBSelector(selector.ColorRGBSelectorConfig()),
+        selector.ColorRGBSelector(selector.ColorRGBSelectorConfig()),  # type: ignore[arg-type]
     ),
     (CONF_SLEEP_TRANSITION, DEFAULT_SLEEP_TRANSITION, VALID_TRANSITION),
     (CONF_ADAPT_UNTIL_SLEEP, DEFAULT_ADAPT_UNTIL_SLEEP, bool),
@@ -337,7 +401,7 @@ VALIDATION_TUPLES = [
     (
         CONF_BRIGHTNESS_MODE,
         DEFAULT_BRIGHTNESS_MODE,
-        selector.SelectSelector(
+        selector.SelectSelector(  # type: ignore[arg-type]
             selector.SelectSelectorConfig(
                 options=["default", "linear", "tanh"],
                 multiple=False,
@@ -348,6 +412,20 @@ VALIDATION_TUPLES = [
     (CONF_BRIGHTNESS_MODE_TIME_DARK, DEFAULT_BRIGHTNESS_MODE_TIME_DARK, int),
     (CONF_BRIGHTNESS_MODE_TIME_LIGHT, DEFAULT_BRIGHTNESS_MODE_TIME_LIGHT, int),
     (CONF_TAKE_OVER_CONTROL, DEFAULT_TAKE_OVER_CONTROL, bool),
+    (
+        CONF_TAKE_OVER_CONTROL_MODE,
+        DEFAULT_TAKE_OVER_CONTROL_MODE,
+        selector.SelectSelector(  # type: ignore[arg-type]
+            selector.SelectSelectorConfig(
+                options=[
+                    TakeOverControlMode.PAUSE_ALL.value,
+                    TakeOverControlMode.PAUSE_CHANGED.value,
+                ],
+                multiple=False,
+                mode=selector.SelectSelectorMode.DROPDOWN,
+            ),
+        ),
+    ),
     (CONF_DETECT_NON_HA_CHANGES, DEFAULT_DETECT_NON_HA_CHANGES, bool),
     (
         CONF_AUTORESET_CONTROL,
@@ -356,6 +434,16 @@ VALIDATION_TUPLES = [
     ),
     (CONF_ONLY_ONCE, DEFAULT_ONLY_ONCE, bool),
     (CONF_ADAPT_ONLY_ON_BARE_TURN_ON, DEFAULT_ADAPT_ONLY_ON_BARE_TURN_ON, bool),
+    (
+        CONF_MANUAL_CONTROL_ON_EXTERNAL_TURN_ON,
+        DEFAULT_MANUAL_CONTROL_ON_EXTERNAL_TURN_ON,
+        bool,
+    ),
+    (
+        CONF_RESET_MANUAL_CONTROL_ON_SLEEP_MODE_CHANGE,
+        DEFAULT_RESET_MANUAL_CONTROL_ON_SLEEP_MODE_CHANGE,
+        bool,
+    ),
     (CONF_SEPARATE_TURN_ON_COMMANDS, DEFAULT_SEPARATE_TURN_ON_COMMANDS, bool),
     (CONF_SEND_SPLIT_DELAY, DEFAULT_SEND_SPLIT_DELAY, int_between(0, 10000)),
     (CONF_ADAPT_DELAY, DEFAULT_ADAPT_DELAY, cv.positive_float),
@@ -367,10 +455,11 @@ VALIDATION_TUPLES = [
     (CONF_INTERCEPT, DEFAULT_INTERCEPT, bool),
     (CONF_MULTI_LIGHT_INTERCEPT, DEFAULT_MULTI_LIGHT_INTERCEPT, bool),
     (CONF_INCLUDE_CONFIG_IN_ATTRIBUTES, DEFAULT_INCLUDE_CONFIG_IN_ATTRIBUTES, bool),
+    (CONF_EXPAND_LIGHT_GROUPS, DEFAULT_EXPAND_LIGHT_GROUPS, bool),
 ]
 
 
-def timedelta_as_int(value):
+def timedelta_as_int(value: timedelta) -> float:
     """Convert a `datetime.timedelta` object to an integer.
 
     This integer can be serialized to json but a timedelta cannot.
@@ -380,7 +469,7 @@ def timedelta_as_int(value):
 
 # conf_option: (validator, coerce) tuples
 # these validators cannot be serialized but can be serialized when coerced by coerce.
-EXTRA_VALIDATION = {
+EXTRA_VALIDATION: dict[str, tuple[Any, Any]] = {
     CONF_INTERVAL: (cv.time_period, timedelta_as_int),
     CONF_SUNRISE_OFFSET: (cv.time_period, timedelta_as_int),
     CONF_SUNRISE_TIME: (cv.time, str),
@@ -395,7 +484,7 @@ EXTRA_VALIDATION = {
 }
 
 
-def maybe_coerce(key, validation):
+def maybe_coerce(key: str, validation: Any) -> vol.All | Any:
     """Coerce the validation into a json serializable type."""
     validation, coerce = EXTRA_VALIDATION.get(key, (validation, None))
     if coerce is not None:
@@ -403,7 +492,7 @@ def maybe_coerce(key, validation):
     return validation
 
 
-def replace_none_str(value, replace_with=None):
+def replace_none_str(value: Any, replace_with: Any | None = None) -> Any:
     """Replace "None" -> replace_with."""
     return value if value != NONE_STR else replace_with
 
@@ -421,16 +510,13 @@ _DOMAIN_SCHEMA = vol.Schema(
 )
 
 
-def apply_service_schema(initial_transition: int = 1):
+def apply_service_schema() -> vol.Schema:
     """Return the schema for the apply service."""
     return vol.Schema(
         {
-            vol.Optional(CONF_ENTITY_ID): cv.entity_ids,
-            vol.Optional(CONF_LIGHTS, default=[]): cv.entity_ids,
-            vol.Optional(
-                CONF_TRANSITION,
-                default=initial_transition,
-            ): VALID_TRANSITION,
+            vol.Optional(CONF_ENTITY_ID): cv.entity_ids,  # type: ignore[arg-type]
+            vol.Optional(CONF_LIGHTS, default=[]): cv.entity_ids,  # type: ignore[arg-type]
+            vol.Optional(CONF_TRANSITION): VALID_TRANSITION,
             vol.Optional(ATTR_ADAPT_BRIGHTNESS, default=True): cv.boolean,
             vol.Optional(ATTR_ADAPT_COLOR, default=True): cv.boolean,
             vol.Optional(CONF_PREFER_RGB_COLOR, default=False): cv.boolean,
@@ -439,10 +525,26 @@ def apply_service_schema(initial_transition: int = 1):
     )
 
 
+def change_switch_settings_schema() -> dict[vol.Marker, Any]:
+    """Return the schema for the change_switch_settings service."""
+    args: dict[vol.Marker, Any] = {
+        vol.Optional(CONF_USE_DEFAULTS, default="current"): cv.string,
+    }
+    # Modifying these after init isn't possible
+    skip = (CONF_INTERVAL, CONF_NAME, CONF_LIGHTS)
+    for k, _, valid in VALIDATION_TUPLES:
+        if k not in skip:
+            args[vol.Optional(k)] = valid
+    return args
+
+
 SET_MANUAL_CONTROL_SCHEMA = vol.Schema(
     {
-        vol.Optional(CONF_ENTITY_ID): cv.entity_ids,
-        vol.Optional(CONF_LIGHTS, default=[]): cv.entity_ids,
-        vol.Optional(CONF_MANUAL_CONTROL, default=True): cv.boolean,
+        vol.Optional(CONF_ENTITY_ID): cv.entity_ids,  # type: ignore[arg-type]
+        vol.Optional(CONF_LIGHTS, default=[]): cv.entity_ids,  # type: ignore[arg-type]
+        vol.Optional(CONF_MANUAL_CONTROL, default=True): vol.Any(
+            cv.boolean,
+            vol.In(["brightness", "color"]),
+        ),
     },
 )

custom_components/adaptive_lighting/diagnostics.py

@@ -0,0 +1,131 @@
+"""Diagnostics support for Adaptive Lighting."""
+
+from typing import Any
+
+from homeassistant.components.light import (
+    ATTR_BRIGHTNESS,
+    ATTR_COLOR_TEMP_KELVIN,
+    ATTR_RGB_COLOR,
+    ATTR_TRANSITION,
+)
+from homeassistant.components.switch import DOMAIN as SWITCH_DOMAIN
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.const import STATE_OFF, STATE_ON, STATE_UNAVAILABLE, STATE_UNKNOWN
+from homeassistant.core import HomeAssistant
+
+from .adaptation_utils import LightControlAttributes
+from .const import (
+    ADAPT_BRIGHTNESS_SWITCH,
+    ADAPT_COLOR_SWITCH,
+    ATTR_ADAPTIVE_LIGHTING_MANAGER,
+    DOMAIN,
+    SLEEP_MODE_SWITCH,
+)
+from .switch import AdaptiveLightingManager, AdaptiveSwitch
+
+_REPORTABLE_LIGHT_STATES = {
+    STATE_OFF,
+    STATE_ON,
+    STATE_UNAVAILABLE,
+    STATE_UNKNOWN,
+}
+_TARGET_ATTRIBUTES = (
+    ATTR_BRIGHTNESS,
+    ATTR_COLOR_TEMP_KELVIN,
+    ATTR_RGB_COLOR,
+    ATTR_TRANSITION,
+)
+
+
+def _last_adaptation_values(
+    manager: AdaptiveLightingManager,
+    light: str,
+) -> dict[str, Any] | None:
+    """Return latest retained value for each allowlisted adaptation attribute.
+
+    Values may come from different commands because the manager merges partial
+    service data per attribute.
+    """
+    service_data = manager.last_service_data.get(light)
+    if service_data is None:
+        return None
+    target = {
+        attribute: (
+            list(service_data[attribute])
+            if attribute == ATTR_RGB_COLOR
+            else service_data[attribute]
+        )
+        for attribute in _TARGET_ATTRIBUTES
+        if attribute in service_data
+    }
+    return target or None
+
+
+def _autoreset_seconds(
+    manager: AdaptiveLightingManager,
+    light: str,
+) -> float | None:
+    """Return remaining time for a running global manual-control reset."""
+    timer = manager.auto_reset_manual_control_timers.get(light)
+    if timer is None or not timer.is_running():
+        return None
+    remaining = timer.remaining_time()
+    return round(remaining, 3) if remaining > 0 else None
+
+
+async def async_get_config_entry_diagnostics(
+    hass: HomeAssistant,
+    config_entry: ConfigEntry,
+) -> dict[str, Any]:
+    """Return an allowlisted, on-demand snapshot for one config entry."""
+    domain_data = hass.data.get(DOMAIN)
+    if not isinstance(domain_data, dict):
+        return {"loaded": False}
+    entry_data = domain_data.get(config_entry.entry_id)
+    manager = domain_data.get(ATTR_ADAPTIVE_LIGHTING_MANAGER)
+    if not isinstance(entry_data, dict) or not isinstance(
+        manager,
+        AdaptiveLightingManager,
+    ):
+        return {"loaded": False}
+    switch = entry_data.get(SWITCH_DOMAIN)
+    if not isinstance(switch, AdaptiveSwitch):
+        return {"loaded": False}
+
+    lights: dict[str, Any] = {}
+    for index, light in enumerate(sorted(switch.lights), start=1):
+        state = hass.states.get(light)
+        state_value = "missing"
+        if state is not None:
+            state_value = (
+                state.state
+                if state.state in _REPORTABLE_LIGHT_STATES
+                else STATE_UNKNOWN
+            )
+        manual_control = manager.get_manual_control_attributes(light)
+        lights[f"light_{index}"] = {
+            "state": state_value,
+            "global_manager_manual_control": {
+                "brightness": bool(
+                    manual_control & LightControlAttributes.BRIGHTNESS,
+                ),
+                "color": bool(manual_control & LightControlAttributes.COLOR),
+            },
+            "global_manager_autoreset_seconds": _autoreset_seconds(manager, light),
+            "global_manager_last_adaptation_values": _last_adaptation_values(
+                manager,
+                light,
+            ),
+        }
+
+    return {
+        "loaded": True,
+        "profile_switches": {
+            "profile": switch.is_on,
+            "adapt_brightness": entry_data[ADAPT_BRIGHTNESS_SWITCH].is_on,
+            "adapt_color": entry_data[ADAPT_COLOR_SWITCH].is_on,
+            "sleep_mode": entry_data[SLEEP_MODE_SWITCH].is_on,
+        },
+        "manager_fact_scope": "global_shared_across_profiles",
+        "lights": lights,
+    }

custom_components/adaptive_lighting/docs_gen.py

@@ -0,0 +1,35 @@
+"""Documentation generation utilities for Adaptive Lighting.
+
+Provides functions to transform content for the documentation site.
+Used by markdown-code-runner to generate documentation pages from README content.
+"""
+
+from __future__ import annotations
+
+import re
+
+
+def _transform_readme_links(content: str) -> str:
+    """Transform README internal links to docs site links."""
+    # Map README anchors to doc pages
+    link_map = {
+        "#gear-configuration": "configuration.md",
+        "#memo-options": "configuration.md#all-options",
+        "#hammer_and_wrench-services": "services.md",
+        "#adaptive_lightingapply": "services.md#adaptive_lightingapply",
+        "#adaptive_lightingset_manual_control": "services.md#adaptive_lightingset_manual_control",
+        "#adaptive_lightingchange_switch_settings": "services.md#adaptive_lightingchange_switch_settings",
+        "#robot-automation-examples": "automation-examples.md",
+        "#sos-troubleshooting": "troubleshooting.md",
+        "#exclamation-common-problems--solutions": "troubleshooting.md#common-problems-solutions",
+        "#bar_chart-graphs": "advanced/brightness-modes.md#graphs",
+        "#bulb-features": "index.md#features",
+        "#control_knobs-regain-manual-control": "advanced/manual-control.md",
+        "#eyes-see-also": "see-also.md",
+    }
+
+    for old_link, new_link in link_map.items():
+        content = content.replace(f"]({old_link})", f"]({new_link})")
+
+    # Remove ToC link pattern [[ToC](#...)]
+    return re.sub(r"\[\[ToC\]\([^)]+\)\]", "", content)

custom_components/adaptive_lighting/hass_utils.py

@@ -1,15 +1,35 @@
 """Utility functions for HA core."""
+
 import logging
 from collections.abc import Awaitable, Callable
 
 from homeassistant.core import HomeAssistant, ServiceCall
+from homeassistant.helpers.target import async_extract_referenced_entity_ids
 from homeassistant.util.read_only_dict import ReadOnlyDict
 
+try:
+    from homeassistant.helpers.target import TargetSelection
+except ImportError:  # Compatibility with older Home Assistant releases
+    from homeassistant.helpers.target import TargetSelectorData as TargetSelection
+
 from .adaptation_utils import ServiceData
 
 _LOGGER = logging.getLogger(__name__)
 
 
+def target_entities(
+    hass: HomeAssistant,
+    service_data: ServiceData,
+) -> set[str]:
+    """Resolve all directly and indirectly targeted entities without groups."""
+    selected = async_extract_referenced_entity_ids(
+        hass,
+        TargetSelection(service_data),
+        expand_group=False,
+    )
+    return selected.referenced | selected.indirectly_referenced
+
+
 def setup_service_call_interceptor(
     hass: HomeAssistant,
     domain: str,
@@ -26,7 +46,7 @@ def setup_service_call_interceptor(
         # This is necessary to replace a registered service handler with our
         # proxy handler to intercept calls.
         registered_services = (
-            hass.services._services  # pylint: disable=protected-access
+            hass.services._services  # pylint: disable=protected-access  # type: ignore[attr-defined]
         )
     except AttributeError as error:
         msg = (
@@ -47,19 +67,26 @@ def setup_service_call_interceptor(
             data = dict(call.data)
 
             # Call interceptor
-            await intercept_func(call, data)
+            result = intercept_func(call, data)
+            if result is not None:
+                await result
 
             # Convert data back to read-only
             call.data = ReadOnlyDict(data)
-        except Exception as e:  # noqa: BLE001
+        except Exception:
             # Blindly catch all exceptions to avoid breaking light.turn_on
-            _LOGGER.error(
-                "Error for call '%s' in service_func_proxy: '%s'",
+            _LOGGER.exception(
+                "Error for call '%s' in service_func_proxy",
                 call.data,
-                e,
             )
         # Call original service handler with processed data
-        await existing_service.job.target(call)
+        import asyncio
+
+        target = existing_service.job.target
+        if asyncio.iscoroutinefunction(target):
+            await target(call)
+        else:
+            target(call)
 
     hass.services.async_register(
         domain,
@@ -68,7 +95,7 @@ def setup_service_call_interceptor(
         existing_service.schema,
     )
 
-    def remove():
+    def remove() -> None:
         # Remove the interceptor by reinstalling the original service handler
         hass.services.async_register(
             domain,

custom_components/adaptive_lighting/helpers.py

@@ -4,6 +4,10 @@ from __future__ import annotations
 
 import base64
 import math
+from typing import TYPE_CHECKING, Any
+
+if TYPE_CHECKING:
+    from homeassistant.core import HomeAssistant
 
 
 def clamp(value: float, minimum: float, maximum: float) -> float:
@@ -34,6 +38,7 @@ def int_to_base36(num: int) -> str:
     >>> base36_num = int_to_base36(num)
     >>> print(base36_num)
     '2N9'
+
     """
     alphanumeric_chars = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"
 
@@ -82,3 +87,12 @@ def color_difference_redmean(
     green_term = 4 * delta_g**2
     blue_term = (2 + (255 - r_hat) / 256) * delta_b**2
     return math.sqrt(red_term + green_term + blue_term)
+
+
+def get_friendly_name(hass: HomeAssistant, entity_id: str) -> str:
+    """Retrieve the friendly name of an entity."""
+    state = hass.states.get(entity_id)
+    if state and hasattr(state, "attributes"):
+        attributes: dict[str, Any] = dict(getattr(state, "attributes", {}))
+        return attributes.get("friendly_name", entity_id)
+    return entity_id

custom_components/adaptive_lighting/manifest.json

@@ -3,10 +3,10 @@
   "name": "Adaptive Lighting",
   "codeowners": ["@basnijholt", "@RubenKelevra", "@th3w1zard1", "@protyposis"],
   "config_flow": true,
-  "dependencies": [],
+  "dependencies": ["light"],
   "documentation": "https://github.com/basnijholt/adaptive-lighting#readme",
   "iot_class": "calculated",
   "issue_tracker": "https://github.com/basnijholt/adaptive-lighting/issues",
   "requirements": ["ulid-transform"],
-  "version": "1.19.0"
+  "version": "1.32.0"
 }

custom_components/adaptive_lighting/services.yaml

@@ -57,20 +57,18 @@ set_manual_control:
           domain: light
           multiple: true
     manual_control:
-      description: Whether to add ("true") or remove ("false") the light from the "manual_control" list. 🔒
+      description: Whether to add ("true") or remove ("false") all adapted attributes of the light from the "manual_control" list, or the name of an attribute for selective addition. 🔒
       example: true
       default: true
       selector:
         boolean: null
 change_switch_settings:
   description: Change any settings you'd like in the switch. All options here are the same as in the config flow.
+  target:
+    entity:
+      integration: adaptive_lighting
+      domain: switch
   fields:
-    entity_id:
-      description: Entity ID of the switch. 📝
-      required: true
-      selector:
-        entity:
-          domain: switch
     use_defaults:
       description: 'Sets the default values not specified in this service call. Options: "current" (default, retains current values), "factory" (resets to documented defaults), or "configuration" (reverts to switch config defaults). ⚙️'
       example: current
@@ -141,6 +139,12 @@ change_switch_settings:
       example: false
       selector:
         boolean: null
+    expand_light_groups:
+      description: Expand light groups to their members (`true`, default). Set `false` to send commands to the group and track manual control for the group. Explicit member targets in services stay individual targets.
+      required: false
+      example: true
+      selector:
+        boolean: null
     separate_turn_on_commands:
       description: Use separate `light.turn_on` calls for color and brightness, needed for some light types. 🔀
       required: false
@@ -185,7 +189,7 @@ change_switch_settings:
       example: 0
       selector:
         number:
-          min: 0
+          min: -86400
           max: 86300
     sunrise_time:
       description: Set a fixed time (HH:MM:SS) for sunrise. 🌅
@@ -199,7 +203,7 @@ change_switch_settings:
       example: ''
       selector:
         number:
-          min: 0
+          min: -86400
           max: 86300
     sunset_time:
       description: Set a fixed time (HH:MM:SS) for sunset. 🌇
@@ -220,13 +224,28 @@ change_switch_settings:
       selector:
         time: null
     take_over_control:
-      description: Disable Adaptive Lighting if another source calls `light.turn_on` while lights are on and being adapted. Note that this calls `homeassistant.update_entity` every `interval`! 🔒
+      description: Pause adaptation of individual lights and hand over (manual) control to other sources that issue `light.turn_on` calls for lights that are on. 🔒
       required: false
       example: true
       selector:
         boolean: null
+    take_over_control_mode:
+      description: The adaptation pausing mode when other sources change brightness and/or color of lights. `pause_all` always pauses both brightness and color adaptation. `pause_changed` pauses the adaptation of only the changed attributes and continues adapting unchanged attributes, e.g., continues color adaptation when only brightness was changed.
+      required: false
+      example: pause_changed
+      selector:
+        select:
+          options:
+          - pause_all
+          - pause_changed
     detect_non_ha_changes:
-      description: 'Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an ''on'' state, which could result in lights turning on unexpectedly. Disable this feature if you encounter such issues.'
+      description: 'Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an ''on'' state, which could result in lights turning on unexpectedly. Note that this calls `homeassistant.update_entity` every `interval`! Disable this feature if you encounter such issues.'
+      required: false
+      example: false
+      selector:
+        boolean: null
+    manual_control_on_external_turn_on:
+      description: Treat turn-ons without a matching Home Assistant `light.turn_on` context as manual control. Normal manual-control resets apply. Still allows `detect_non_ha_changes` for already-on lights. Needs `take_over_control` enabled. 🕵️
       required: false
       example: false
       selector:

custom_components/adaptive_lighting/strings.json

@@ -7,6 +7,13 @@
         "data": {
           "name": "Name"
         }
+      },
+      "menu": {
+        "title": "Create or Duplicate",
+        "description": "Do you want to create a new instance or duplicate an existing one?",
+        "data": {
+          "action": "Action"
+        }
       }
     },
     "abort": {
@@ -17,70 +24,85 @@
     "step": {
       "init": {
         "title": "Adaptive Lighting options",
-        "description": "Configure an Adaptive Lighting component. Option names align with the YAML settings. If you've defined this entry in YAML, no options will appear here. For interactive graphs that demonstrate parameter effects, visit [this web app](https://basnijholt.github.io/adaptive-lighting). For further details, see the [official documentation](https://github.com/basnijholt/adaptive-lighting#readme).",
+        "description": "Configure an Adaptive Lighting component. Option names align with the YAML settings. If you've defined this entry in YAML, no options will appear here. For interactive graphs that demonstrate parameter effects, visit [this web app]({webapp_url}). For further details, see the [official documentation]({docs_url}).",
         "data": {
           "lights": "lights: List of light entity_ids to be controlled (may be empty). 🌟",
           "interval": "interval",
           "transition": "transition",
-          "initial_transition": "initial_transition",
           "min_brightness": "min_brightness: Minimum brightness percentage. 💡",
           "max_brightness": "max_brightness: Maximum brightness percentage. 💡",
           "min_color_temp": "min_color_temp: Warmest color temperature in Kelvin. 🔥",
           "max_color_temp": "max_color_temp: Coldest color temperature in Kelvin. ❄️",
-          "prefer_rgb_color": "prefer_rgb_color: Whether to prefer RGB color adjustment over light color temperature when possible. 🌈",
           "sleep_brightness": "sleep_brightness",
-          "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp",
-          "sleep_color_temp": "sleep_color_temp",
-          "sleep_rgb_color": "sleep_rgb_color",
-          "sleep_transition": "sleep_transition",
-          "transition_until_sleep": "transition_until_sleep: When enabled, Adaptive Lighting will treat sleep settings as the minimum, transitioning to these values after sunset. 🌙",
-          "sunrise_time": "sunrise_time",
-          "min_sunrise_time": "min_sunrise_time",
-          "max_sunrise_time": "max_sunrise_time",
-          "sunrise_offset": "sunrise_offset",
-          "sunset_time": "sunset_time",
-          "min_sunset_time": "min_sunset_time",
-          "max_sunset_time": "max_sunset_time",
-          "sunset_offset": "sunset_offset",
-          "brightness_mode": "brightness_mode",
-          "brightness_mode_time_dark": "brightness_mode_time_dark",
-          "brightness_mode_time_light": "brightness_mode_time_light",
-          "take_over_control": "take_over_control: Disable Adaptive Lighting if another source calls `light.turn_on` while lights are on and being adapted. Note that this calls `homeassistant.update_entity` every `interval`! 🔒",
-          "detect_non_ha_changes": "detect_non_ha_changes: Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Disable this feature if you encounter such issues.",
-          "autoreset_control_seconds": "autoreset_control_seconds",
-          "only_once": "only_once: Adapt lights only when they are turned on (`true`) or keep adapting them (`false`). 🔄",
-          "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: When turning lights on initially. If set to `true`, AL adapts only if `light.turn_on` is invoked without specifying color or brightness. ❌🌈 This e.g., prevents adaptation when activating a scene. If `false`, AL adapts regardless of the presence of color or brightness in the initial `service_data`. Needs `take_over_control` enabled. 🕵️ ",
-          "separate_turn_on_commands": "separate_turn_on_commands: Use separate `light.turn_on` calls for color and brightness, needed for some light types. 🔀",
-          "send_split_delay": "send_split_delay",
-          "adapt_delay": "adapt_delay",
-          "skip_redundant_commands": "skip_redundant_commands: Skip sending adaptation commands whose target state already equals the light's known state. Minimizes network traffic and improves the adaptation responsivity in some situations. 📉Disable if physical light states get out of sync with HA's recorded state.",
-          "intercept": "intercept: Intercept and adapt `light.turn_on` calls to enabling instantaneous color and brightness adaptation. 🏎️ Disable for lights that do not support `light.turn_on` with color and brightness.",
-          "multi_light_intercept": "multi_light_intercept: Intercept and adapt `light.turn_on` calls that target multiple lights. ➗⚠️ This might result in splitting up a single `light.turn_on` call into multiple calls, e.g., when lights are in different switches. Requires `intercept` to be enabled.",
-          "include_config_in_attributes": "include_config_in_attributes: Show all options as attributes on the switch in Home Assistant when set to `true`. 📝"
+          "sleep_color_temp": "sleep_color_temp"
         },
         "data_description": {
           "interval": "Frequency to adapt the lights, in seconds. 🔄",
           "transition": "Duration of transition when lights change, in seconds. 🕑",
-          "initial_transition": "Duration of the first transition when lights turn from `off` to `on` in seconds. ⏲️",
           "sleep_brightness": "Brightness percentage of lights in sleep mode. 😴",
-          "sleep_rgb_or_color_temp": "Use either `\"rgb_color\"` or `\"color_temp\"` in sleep mode. 🌙",
-          "sleep_color_temp": "Color temperature in sleep mode (used when `sleep_rgb_or_color_temp` is `color_temp`) in Kelvin. 😴",
-          "sleep_rgb_color": "RGB color in sleep mode (used when `sleep_rgb_or_color_temp` is \"rgb_color\"). 🌈",
-          "sleep_transition": "Duration of transition when \"sleep mode\" is toggled in seconds. 😴",
-          "sunrise_time": "Set a fixed time (HH:MM:SS) for sunrise. 🌅",
-          "min_sunrise_time": "Set the earliest virtual sunrise time (HH:MM:SS), allowing for later sunrises. 🌅",
-          "max_sunrise_time": "Set the latest virtual sunrise time (HH:MM:SS), allowing for earlier sunrises. 🌅",
-          "sunrise_offset": "Adjust sunrise time with a positive or negative offset in seconds. ⏰",
-          "sunset_time": "Set a fixed time (HH:MM:SS) for sunset. 🌇",
-          "min_sunset_time": "Set the earliest virtual sunset time (HH:MM:SS), allowing for later sunsets. 🌇",
-          "max_sunset_time": "Set the latest virtual sunset time (HH:MM:SS), allowing for earlier sunsets. 🌇",
-          "sunset_offset": "Adjust sunset time with a positive or negative offset in seconds. ⏰",
-          "brightness_mode": "Brightness mode to use. Possible values are `default`, `linear`, and `tanh` (uses `brightness_mode_time_dark` and `brightness_mode_time_light`). 📈",
-          "brightness_mode_time_dark": "(Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness before/after sunrise/sunset. 📈📉",
-          "brightness_mode_time_light": "(Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness after/before sunrise/sunset. 📈📉.",
-          "autoreset_control_seconds": "Automatically reset the manual control after a number of seconds. Set to 0 to disable. ⏲️",
-          "send_split_delay": "Delay (ms) between `separate_turn_on_commands` for lights that don't support simultaneous brightness and color setting. ⏲️",
-          "adapt_delay": "Wait time (seconds) between light turn on and Adaptive Lighting applying changes. Might help to avoid flickering. ⏲️"
+          "sleep_color_temp": "Color temperature in sleep mode (used when `sleep_rgb_or_color_temp` is `color_temp`) in Kelvin. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "name": "Advanced settings",
+            "description": "Additional settings for fine-tuning Adaptive Lighting.",
+            "data": {
+              "initial_transition": "initial_transition",
+              "prefer_rgb_color": "prefer_rgb_color: Whether to prefer RGB color adjustment over light color temperature when possible. 🌈",
+              "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp",
+              "sleep_rgb_color": "sleep_rgb_color",
+              "sleep_transition": "sleep_transition",
+              "transition_until_sleep": "transition_until_sleep: When enabled, Adaptive Lighting will treat sleep settings as the minimum, transitioning to these values after sunset. 🌙",
+              "sunrise_time": "sunrise_time",
+              "min_sunrise_time": "min_sunrise_time",
+              "max_sunrise_time": "max_sunrise_time",
+              "sunrise_offset": "sunrise_offset",
+              "sunset_time": "sunset_time",
+              "min_sunset_time": "min_sunset_time",
+              "max_sunset_time": "max_sunset_time",
+              "sunset_offset": "sunset_offset",
+              "brightness_mode": "brightness_mode",
+              "brightness_mode_time_dark": "brightness_mode_time_dark",
+              "brightness_mode_time_light": "brightness_mode_time_light",
+              "take_over_control": "take_over_control: Pause adaptation of individual lights and hand over (manual) control to other sources that issue `light.turn_on` calls for lights that are on. 🔒",
+              "take_over_control_mode": "take_over_control_mode",
+              "detect_non_ha_changes": "detect_non_ha_changes: Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Note that this calls `homeassistant.update_entity` every `interval`! Disable this feature if you encounter such issues.",
+              "autoreset_control_seconds": "autoreset_control_seconds",
+              "only_once": "only_once: Adapt lights only when they are turned on (`true`) or keep adapting them (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: When turning lights on initially. If set to `true`, AL adapts only if `light.turn_on` is invoked without specifying color or brightness. ❌🌈 This e.g., prevents adaptation when activating a scene and marks the light as manually controlled. If `false`, AL adapts regardless of the presence of color or brightness in the initial `service_data`. Needs `take_over_control` enabled. 🕵️",
+              "manual_control_on_external_turn_on": "manual_control_on_external_turn_on: Treat turn-ons without a matching Home Assistant `light.turn_on` context as manual control. Normal manual-control resets apply. Still allows `detect_non_ha_changes` for already-on lights. Needs `take_over_control` enabled. 🕵️",
+              "reset_manual_control_on_sleep_mode_change": "reset_manual_control_on_sleep_mode_change: Reset manual control when the sleep mode switch is toggled. Set to `false` to preserve manual control across sleep mode changes. 😴",
+              "separate_turn_on_commands": "separate_turn_on_commands: Use separate `light.turn_on` calls for color and brightness, needed for some light types. 🔀",
+              "send_split_delay": "send_split_delay",
+              "adapt_delay": "adapt_delay",
+              "skip_redundant_commands": "skip_redundant_commands: Skip sending adaptation commands whose target state already equals the light's known state. Minimizes network traffic and improves the adaptation responsivity in some situations. 📉Disable if physical light states get out of sync with HA's recorded state.",
+              "intercept": "intercept: Intercept and adapt `light.turn_on` calls to enabling instantaneous color and brightness adaptation. 🏎️ Disable for lights that do not support `light.turn_on` with color and brightness.",
+              "multi_light_intercept": "multi_light_intercept: Intercept and adapt `light.turn_on` calls that target multiple lights. ➗⚠️ This might result in splitting up a single `light.turn_on` call into multiple calls, e.g., when lights are in different switches. Requires `intercept` to be enabled.",
+              "include_config_in_attributes": "include_config_in_attributes: Show all options as attributes on the switch in Home Assistant when set to `true`. 📝",
+              "expand_light_groups": "expand_light_groups: Expand light groups to their members (`true`, default). Set `false` to send commands to the group and track manual control for the group. Explicit member targets in services stay individual targets."
+            },
+            "data_description": {
+              "initial_transition": "Duration of the first transition when lights turn from `off` to `on` in seconds. ⏲️",
+              "sleep_rgb_or_color_temp": "Use either `\"rgb_color\"` or `\"color_temp\"` in sleep mode. 🌙",
+              "sleep_rgb_color": "RGB color in sleep mode (used when `sleep_rgb_or_color_temp` is \"rgb_color\"). 🌈",
+              "sleep_transition": "Duration of transition when \"sleep mode\" is toggled in seconds. 😴",
+              "sunrise_time": "Set a fixed time (HH:MM:SS) for sunrise. 🌅",
+              "min_sunrise_time": "Set the earliest virtual sunrise time (HH:MM:SS), allowing for later sunrises. 🌅",
+              "max_sunrise_time": "Set the latest virtual sunrise time (HH:MM:SS), allowing for earlier sunrises. 🌅",
+              "sunrise_offset": "Adjust sunrise time with a positive or negative offset in seconds. ⏰",
+              "sunset_time": "Set a fixed time (HH:MM:SS) for sunset. 🌇",
+              "min_sunset_time": "Set the earliest virtual sunset time (HH:MM:SS), allowing for later sunsets. 🌇",
+              "max_sunset_time": "Set the latest virtual sunset time (HH:MM:SS), allowing for earlier sunsets. 🌇",
+              "sunset_offset": "Adjust sunset time with a positive or negative offset in seconds. ⏰",
+              "brightness_mode": "Brightness mode to use. Possible values are `default`, `linear`, and `tanh` (uses `brightness_mode_time_dark` and `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness before/after sunrise/sunset. 📈📉",
+              "brightness_mode_time_light": "(Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness after/before sunrise/sunset. 📈📉.",
+              "take_over_control_mode": "The adaptation pausing mode when other sources change brightness and/or color of lights. `pause_all` always pauses both brightness and color adaptation. `pause_changed` pauses the adaptation of only the changed attributes and continues adapting unchanged attributes, e.g., continues color adaptation when only brightness was changed.",
+              "autoreset_control_seconds": "Automatically reset the manual control after a number of seconds. Set to 0 to disable. ⏲️",
+              "send_split_delay": "Delay (ms) between `separate_turn_on_commands` for lights that don't support simultaneous brightness and color setting. ⏲️",
+              "adapt_delay": "Wait time (seconds) between light turn on and Adaptive Lighting applying changes. Might help to avoid flickering. ⏲️"
+            }
+          }
         }
       }
     },
@@ -137,7 +159,7 @@
           "name": "lights"
         },
         "manual_control": {
-          "description": "Whether to add (\"true\") or remove (\"false\") the light from the \"manual_control\" list. 🔒",
+          "description": "Whether to add (\"true\") or remove (\"false\") all adapted attributes of the light from the \"manual_control\" list, or the name of an attribute for selective addition. 🔒",
           "name": "manual_control"
         }
       }
@@ -146,10 +168,6 @@
       "name": "change_switch_settings",
       "description": "Change any settings you'd like in the switch. All options here are the same as in the config flow.",
       "fields": {
-        "entity_id": {
-          "description": "Entity ID of the switch. 📝",
-          "name": "entity_id"
-        },
         "use_defaults": {
           "description": "Sets the default values not specified in this service call. Options: \"current\" (default, retains current values), \"factory\" (resets to documented defaults), or \"configuration\" (reverts to switch config defaults). ⚙️",
           "name": "use_defaults"
@@ -194,6 +212,10 @@
           "description": "Whether to prefer RGB color adjustment over light color temperature when possible. 🌈",
           "name": "prefer_rgb_color"
         },
+        "expand_light_groups": {
+          "description": "Expand light groups to their members (`true`, default). Set `false` to send commands to the group and track manual control for the group. Explicit member targets in services stay individual targets.",
+          "name": "expand_light_groups"
+        },
         "separate_turn_on_commands": {
           "description": "Use separate `light.turn_on` calls for color and brightness, needed for some light types. 🔀",
           "name": "separate_turn_on_commands"
@@ -243,13 +265,21 @@
           "name": "min_sunset_time"
         },
         "take_over_control": {
-          "description": "Disable Adaptive Lighting if another source calls `light.turn_on` while lights are on and being adapted. Note that this calls `homeassistant.update_entity` every `interval`! 🔒",
+          "description": "Pause adaptation of individual lights and hand over (manual) control to other sources that issue `light.turn_on` calls for lights that are on. 🔒",
           "name": "take_over_control"
         },
+        "take_over_control_mode": {
+          "description": "The adaptation pausing mode when other sources change brightness and/or color of lights. `pause_all` always pauses both brightness and color adaptation. `pause_changed` pauses the adaptation of only the changed attributes and continues adapting unchanged attributes, e.g., continues color adaptation when only brightness was changed.",
+          "name": "take_over_control_mode"
+        },
         "detect_non_ha_changes": {
-          "description": "Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Disable this feature if you encounter such issues.",
+          "description": "Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Note that this calls `homeassistant.update_entity` every `interval`! Disable this feature if you encounter such issues.",
           "name": "detect_non_ha_changes"
         },
+        "manual_control_on_external_turn_on": {
+          "description": "Treat turn-ons without a matching Home Assistant `light.turn_on` context as manual control. Normal manual-control resets apply. Still allows `detect_non_ha_changes` for already-on lights. Needs `take_over_control` enabled. 🕵️",
+          "name": "manual_control_on_external_turn_on"
+        },
         "transition": {
           "description": "Duration of transition when lights change, in seconds. 🕑",
           "name": "transition"

custom_components/adaptive_lighting/translations/LICENSE.md

@@ -0,0 +1,44 @@
+This license **only** applies to all files in `custom_components/adaptive_lighting/translations/` in the Adaptive Lighting repository.
+For these translations we wave copyright and related rights through the CC0 1.0 Universal license.
+
+# Creative Commons CC0 1.0 Universal
+
+CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE LEGAL SERVICES. DISTRIBUTION OF THIS DOCUMENT DOES NOT CREATE AN ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES REGARDING THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED HEREUNDER, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING FROM THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED HEREUNDER.
+
+### Statement of Purpose
+
+The laws of most jurisdictions throughout the world automatically confer exclusive Copyright and Related Rights (defined below) upon the creator and subsequent owner(s) (each and all, an "owner") of an original work of authorship and/or a database (each, a "Work").
+
+Certain owners wish to permanently relinquish those rights to a Work for the purpose of contributing to a commons of creative, cultural and scientific works ("Commons") that the public can reliably and without fear of later claims of infringement build upon, modify, incorporate in other works, reuse and redistribute as freely as possible in any form whatsoever and for any purposes, including without limitation commercial purposes. These owners may contribute to the Commons to promote the ideal of a free culture and the further production of creative, cultural and scientific works, or to gain reputation or greater distribution for their Work in part through the use and efforts of others.
+
+For these and/or other purposes and motivations, and without any expectation of additional consideration or compensation, the person associating CC0 with a Work (the "Affirmer"), to the extent that he or she is an owner of Copyright and Related Rights in the Work, voluntarily elects to apply CC0 to the Work and publicly distribute the Work under its terms, with knowledge of his or her Copyright and Related Rights in the Work and the meaning and intended legal effect of CC0 on those rights.
+
+1. **Copyright and Related Rights.** A Work made available under CC0 may be protected by copyright and related or neighboring rights ("Copyright and Related Rights"). Copyright and Related Rights include, but are not limited to, the following:
+
+   i. the right to reproduce, adapt, distribute, perform, display, communicate, and translate a Work;
+
+   ii. moral rights retained by the original author(s) and/or performer(s);
+
+   iii. publicity and privacy rights pertaining to a person's image or likeness depicted in a Work;
+
+   iv. rights protecting against unfair competition in regards to a Work, subject to the limitations in paragraph 4(a), below;
+
+   v. rights protecting the extraction, dissemination, use and reuse of data in a Work;
+
+   vi. database rights (such as those arising under Directive 96/9/EC of the European Parliament and of the Council of 11 March 1996 on the legal protection of databases, and under any national implementation thereof, including any amended or successor version of such directive); and
+
+   vii. other similar, equivalent or corresponding rights throughout the world based on applicable law or treaty, and any national implementations thereof.
+
+2. **Waiver.** To the greatest extent permitted by, but not in contravention of, applicable law, Affirmer hereby overtly, fully, permanently, irrevocably and unconditionally waives, abandons, and surrenders all of Affirmer's Copyright and Related Rights and associated claims and causes of action, whether now known or unknown (including existing as well as future claims and causes of action), in the Work (i) in all territories worldwide, (ii) for the maximum duration provided by applicable law or treaty (including future time extensions), (iii) in any current or future medium and for any number of copies, and (iv) for any purpose whatsoever, including without limitation commercial, advertising or promotional purposes (the "Waiver"). Affirmer makes the Waiver for the benefit of each member of the public at large and to the detriment of Affirmer's heirs and successors, fully intending that such Waiver shall not be subject to revocation, rescission, cancellation, termination, or any other legal or equitable action to disrupt the quiet enjoyment of the Work by the public as contemplated by Affirmer's express Statement of Purpose.
+
+3. **Public License Fallback.** Should any part of the Waiver for any reason be judged legally invalid or ineffective under applicable law, then the Waiver shall be preserved to the maximum extent permitted taking into account Affirmer's express Statement of Purpose. In addition, to the extent the Waiver is so judged Affirmer hereby grants to each affected person a royalty-free, non transferable, non sublicensable, non exclusive, irrevocable and unconditional license to exercise Affirmer's Copyright and Related Rights in the Work (i) in all territories worldwide, (ii) for the maximum duration provided by applicable law or treaty (including future time extensions), (iii) in any current or future medium and for any number of copies, and (iv) for any purpose whatsoever, including without limitation commercial, advertising or promotional purposes (the "License"). The License shall be deemed effective as of the date CC0 was applied by Affirmer to the Work. Should any part of the License for any reason be judged legally invalid or ineffective under applicable law, such partial invalidity or ineffectiveness shall not invalidate the remainder of the License, and in such case Affirmer hereby affirms that he or she will not (i) exercise any of his or her remaining Copyright and Related Rights in the Work or (ii) assert any associated claims and causes of action with respect to the Work, in either case contrary to Affirmer's express Statement of Purpose.
+
+4. **Limitations and Disclaimers.**
+
+   a. No trademark or patent rights held by Affirmer are waived, abandoned, surrendered, licensed or otherwise affected by this document.
+
+   b. Affirmer offers the Work as-is and makes no representations or warranties of any kind concerning the Work, express, implied, statutory or otherwise, including without limitation warranties of title, merchantability, fitness for a particular purpose, non infringement, or the absence of latent or other defects, accuracy, or the present or absence of errors, whether or not discoverable, all to the greatest extent permissible under applicable law.
+
+   c. Affirmer disclaims responsibility for clearing rights of other persons that may apply to the Work or any use thereof, including without limitation any person's Copyright and Related Rights in the Work. Further, Affirmer disclaims responsibility for obtaining any necessary consents, permissions or other rights required for any use of the Work.
+
+   d. Affirmer understands and acknowledges that Creative Commons is not a party to this document and has no duty or obligation with respect to this CC0 or use of the Work.

custom_components/adaptive_lighting/translations/af.json

@@ -0,0 +1,46 @@
+{
+  "services": {
+    "apply": {
+      "description": "Pas die huidige Adaptive Lighting-instellings op ligte toe.",
+      "fields": {
+        "lights": {
+          "description": "'n Lig (of lys van ligte) om die instellings op toe te pas. 💡"
+        }
+      }
+    },
+    "change_switch_settings": {
+      "fields": {
+        "only_once": {
+          "description": "Pas ligte net aan wanneer hulle aangeskakel is (`true`)  of hou aan om dit aan te pas  (`false`)"
+        },
+        "sunrise_offset": {
+          "description": "Pas sonsopkomstyd aan met 'n positiewe of negatiewe afwyking in sekondes. ⏰"
+        },
+        "sunset_offset": {
+          "description": "Pas sonsondergangtyd aan met 'n positiewe of negatiewe afwyking in sekondes. ⏰"
+        }
+      }
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "title": "Aanpasbare beligting opsies",
+        "data": {},
+        "data_description": {},
+        "sections": {
+          "advanced": {
+            "data": {
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Wanneer ligte aanvanklik aangeskakel word. As dit op \"true\" gestel is, pas AL slegs aan as \"light.turn_on\" opgeroep word sonder om kleur of helderheid te spesifiseer. ❌🌈 Dit verhoed bv. aanpassing wanneer 'n toneel geaktiveer word. As `onwaar`, pas AL aan ongeag die teenwoordigheid van kleur of helderheid in die aanvanklike `diens_data`. Moet `oorname_beheer` geaktiveer moet word. 🕵️ "
+            },
+            "data_description": {
+              "sunrise_offset": "Pas sonsopkomstyd aan met 'n positiewe of negatiewe afwyking in sekondes. ⏰",
+              "sunset_offset": "Pas sonsondergangtyd aan met 'n positiewe of negatiewe afwyking in sekondes. ⏰"
+            }
+          }
+        }
+      }
+    }
+  },
+  "title": "Aanpasbare beligting"
+}

custom_components/adaptive_lighting/translations/bg.json

@@ -0,0 +1,284 @@
+{
+  "title": "Адаптивно осветление",
+  "config": {
+    "step": {
+      "user": {
+        "title": "Изберете име за инстанцията на Адаптивно осветление",
+        "description": "Всяка инстанция може да съдържа множество лампи!",
+        "data": {
+          "name": "Име"
+        }
+      },
+      "menu": {
+        "title": "Създай или дублирай",
+        "description": "Искате ли да създадете нов екземпляр или да дублирате съществуващ?",
+        "data": {
+          "action": "Действие"
+        }
+      }
+    },
+    "abort": {
+      "already_configured": "Това устройство е вече конфигурирано"
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "title": "Настройки на Адаптивно осветление",
+        "description": "Конфигурирайте компонент за Адаптивно осветление. Имената на опциите съвпадат с настройките на YAML. Ако сте дефинирали този запис в YAML, няма да се появят опции тук. За интерактивни графики, които демонстрират ефектите на параметрите, посетете [това уеб приложение]({webapp_url}). За повече подробности, вижте [официалната документация]({docs_url}).",
+        "data": {
+          "lights": "lights: Списък от entity_ids на лампи за контрол (може да е празен). 🌟",
+          "interval": "интервал",
+          "transition": "преход",
+          "min_brightness": "min_brightness: Минимален процент на яркост. 💡",
+          "max_brightness": "max_brightness: Максимален процент на яркост. 💡",
+          "min_color_temp": "min_color_temp: Най-топла цветова температура в Келвини. 🔥",
+          "max_color_temp": "max_color_temp: Най-студена цветова температура в Келвини. ❄️",
+          "sleep_brightness": "яркост при сън",
+          "sleep_color_temp": "цветова температура при сън"
+        },
+        "data_description": {
+          "interval": "Честота за адаптиране на лампите, в секунди. 🔄",
+          "transition": "Продължителност на прехода, когато лампите се променят, в секунди. 🕑",
+          "sleep_brightness": "Процент на яркостта на лампите в режим на сън. 😴",
+          "sleep_color_temp": "Цветова температура в режим на сън (използва се, когато \"sleep_rgb_or_color_temp\" е \"color_temp\") в Келвин. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "начален преход",
+              "prefer_rgb_color": "prefer_rgb_color: Дали да се предпочита RGB цветова корекция пред температура на светлината, когато е възможно. 🌈",
+              "sleep_rgb_or_color_temp": "RGB или цветова температура при сън",
+              "sleep_rgb_color": "RGB цвят при сън",
+              "sleep_transition": "преход при сън",
+              "transition_until_sleep": "transition_until_sleep: Когато е активирано, Adaptive Lighting ще третира настройките за сън като минимум, преминавайки към тези стойности след залез. 🌙",
+              "sunrise_time": "време на изгрев",
+              "min_sunrise_time": "минимално време на изгрев",
+              "max_sunrise_time": "максимално време на изгрев",
+              "sunrise_offset": "отместване на изгрева",
+              "sunset_time": "време на залез",
+              "min_sunset_time": "минимално време на залез",
+              "max_sunset_time": "максимално време на залез",
+              "sunset_offset": "отместване на залеза",
+              "brightness_mode": "режим на яркост",
+              "brightness_mode_time_dark": "време на режим на яркост при тъмно",
+              "brightness_mode_time_light": "време на режим на яркост при светло",
+              "take_over_control": "take_over_control: Деактивира Adaptive Lighting, ако друг източник извика \"light.turn_on\", докато лампите са включени и се адаптират. Имайте предвид, че това извиква \"homeassistant.update_entity\" на всеки \"interval\"! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: Открива и спира адаптации за промени в състоянието, които не са \"light.turn_on\". Изисква \"take_over_control\" активиран. 🕵️ Внимание: ⚠️ Някои лампиможе лъжливо да указват 'включено' състояние, което може да доведе до неочаквано включване на лампите. Деактивирайте тази функция, ако се сблъскате с такива проблеми.",
+              "autoreset_control_seconds": "секунди за автоматично нулиране на контрола",
+              "only_once": "only_once: Адаптира лампите само когато са включени (\"true\") или продължава да ги адаптира (\"false\"). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: При първоначално включване на лампите. Ако е зададено на \"true\", Адаптивно Осветление се адаптира само ако е извикано \"light.turn_on\" без указване на цвят или яркост. ❌🌈 Това например предотвратява адаптация при активиране на сцена. Ако е \"false\", Адаптивно Осветление се адаптира независимо от наличието на цвят или яркост в първоначалните \"service_data\". Изисква \"take_over_control\" активиран. 🕵️ ",
+              "separate_turn_on_commands": "separate_turn_on_commands: Използва отделни \"light.turn_on\" команди за цвят и яркост, необходими за някои типове светлини. 🔀",
+              "send_split_delay": "забавяне при изпращане на разделени",
+              "adapt_delay": "забавяне при адаптация",
+              "skip_redundant_commands": "skip_redundant_commands: Пропуска изпращането на команди за адаптация, чиято целева състояние вече е равно на известното състояние на светлината. Минимизира мрежовия трафик и подобрява отговорността на адаптацията в някои ситуации. 📉Деактивирайте, ако физическите състояния на лампите се разминават с записаното състояние на HA.",
+              "intercept": "intercept: Прихваща и адаптира \"light.turn_on\" повиквания, позволявайки моментална адаптация на цвета и яркостта. 🏎️ Деактивирайте за светлини, които не поддържат \"light.turn_on\" с цвят и яркост.",
+              "multi_light_intercept": "multi_light_intercept: Прихваща и адаптира \"light.turn_on\" повиквания, които целят множество светлини. ➗⚠️ Това може да доведе до разделяне на едно \"light.turn_on\" повикване на множество повиквания, например когато лампите са в различни превключватели. Изисква \"intercept\" да бъде активиран.",
+              "include_config_in_attributes": "include_config_in_attributes: Показва всички опции като атрибути на ключа в Home Assistant, когато е зададено на \"true\". 📝"
+            },
+            "data_description": {
+              "initial_transition": "Продължителност на първия преход, когато лампите преминават от \"off\" на \"on\" в секунди. ⏲️",
+              "sleep_rgb_or_color_temp": "Използвайте или \"\"rgb_color\"\" или \"\"color_temp\"\" в режим на сън. 🌙",
+              "sleep_rgb_color": "RGB цвят в режим на сън (използва се, когато \"sleep_rgb_or_color_temp\" е \"rgb_color\"). 🌈",
+              "sleep_transition": "Продължителност на прехода, когато се превключва \"режим на сън\" в секунди. 😴",
+              "sunrise_time": "Задайте фиксирано време (HH:MM:SS) за изгрев. 🌅",
+              "min_sunrise_time": "Задайте най-ранното виртуално време за изгрев (HH:MM:SS), позволяващо по-късни изгреви. 🌅",
+              "max_sunrise_time": "Задайте най-късното виртуално време за изгрев (HH:MM:SS), позволяващо по-ранни изгреви. 🌅",
+              "sunrise_offset": "Регулирайте времето на изгрев с положителен или отрицателен отместване в секунди. ⏰",
+              "sunset_time": "Задайте фиксирано време (HH:MM:SS) за залез. 🌇",
+              "min_sunset_time": "Задайте най-ранното виртуално време за залез (HH:MM:SS), позволяващо по-късни залези. 🌇",
+              "max_sunset_time": "Задайте най-късното виртуално време за залез (HH:MM:SS), позволяващо по-ранни залези. 🌇",
+              "sunset_offset": "Регулирайте времето на залез с положителен или отрицателен отместване в секунди. ⏰",
+              "brightness_mode": "Режим на яркост за използване. Възможни стойности са \"default\", \"linear\" и \"tanh\" (използва \"brightness_mode_time_dark\" и \"brightness_mode_time_light\"). 📈",
+              "brightness_mode_time_dark": "(Игнорира се, ако \"brightness_mode='default'\") Продължителност в секунди за увеличаване/намаляване на яркостта преди/след изгрев/залез. 📈📉",
+              "brightness_mode_time_light": "(Игнорира се, ако \"brightness_mode='default'\") Продължителност в секунди за увеличаване/намаляване на яркостта след/преди изгрев/залез. 📈📉.",
+              "autoreset_control_seconds": "Автоматично нулиране на ръчния контрол след определен брой секунди. Задайте на 0 за деактивиране. ⏲️",
+              "send_split_delay": "Забавяне (ms) между \"separate_turn_on_commands\" за светлини, които не поддържат едновременна настройка на яркост и цвят. ⏲️",
+              "adapt_delay": "Време за изчакване (секунди) между включване на светлината и прилагане на промени от Адаптивно Осветление. Може да помогне за избягване на трептене. ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "Невалидна опция",
+      "entity_missing": "Една или повече избрани entity-та на лампилипсват от Home Assistant"
+    }
+  },
+  "services": {
+    "apply": {
+      "name": "приложи",
+      "description": "Прилага текущите настройки за Адаптивно осветление към лампите",
+      "fields": {
+        "entity_id": {
+          "description": "entity_id на ключа с настройките за прилагане. 📝",
+          "name": "entity_id"
+        },
+        "lights": {
+          "description": "Светлина (или списък от светлини), към които да се приложат настройките. 💡",
+          "name": "lights"
+        },
+        "transition": {
+          "description": "Продължителност на прехода, когато лампите се променят, в секунди. 🕑",
+          "name": "transition"
+        },
+        "adapt_brightness": {
+          "description": "Дали да се адаптира яркостта на светлината. 🌞",
+          "name": "adapt_brightness"
+        },
+        "adapt_color": {
+          "description": "Дали да се адаптира цветът на лампите, които го поддържат. 🌈",
+          "name": "adapt_color"
+        },
+        "prefer_rgb_color": {
+          "description": "Дали да се предпочита RGB цветова корекция пред температура на светлината, когато е възможно. 🌈",
+          "name": "prefer_rgb_color"
+        },
+        "turn_on_lights": {
+          "description": "Дали да се включат лампите, които в момента са изключени. 🔆",
+          "name": "turn_on_lights"
+        }
+      }
+    },
+    "set_manual_control": {
+      "name": "set_manual_control",
+      "description": "Маркирай дали дадена светлина е с 'ръчно контролиранe'.",
+      "fields": {
+        "entity_id": {
+          "description": "entity_id на ключа, в който да се маркира или демаркира светлината като ръчно контролирана. 📝",
+          "name": "entity_id"
+        },
+        "lights": {
+          "description": "entity_id(та) на лампите, ако не са посочени, всички лампи в ключа се избират. 💡",
+          "name": "lights"
+        },
+        "manual_control": {
+          "description": "Дали да се добави (\"true\") или премахне (\"false\") светлината от списъка \"manual_control\". 🔒",
+          "name": "manual_control"
+        }
+      }
+    },
+    "change_switch_settings": {
+      "name": "change_switch_settings",
+      "description": "Променете всички настройки, които искате в ключа. Всички опции тук са същите като в потока на конфигурацията.",
+      "fields": {
+        "entity_id": {
+          "description": "Entity ID на ключа. 📝",
+          "name": "entity_id"
+        },
+        "use_defaults": {
+          "description": "Задава стойностите по подразбиране, които не са посочени в този обаждане на услугата. Опции: \"current\" (по подразбиране, запазва текущите стойности), \"factory\" (нулира до документирани стойности по подразбиране) или \"configuration\" (връща към стойностите по подразбиране на конфигурацията на превключвателя). ⚙️",
+          "name": "use_defaults"
+        },
+        "include_config_in_attributes": {
+          "description": "Показва всички опции като атрибути на ключа в Home Assistant, когато е зададено на \"true\". 📝",
+          "name": "include_config_in_attributes"
+        },
+        "turn_on_lights": {
+          "description": "Дали да се включат лампите, които в момента са изключени. 🔆",
+          "name": "turn_on_lights"
+        },
+        "initial_transition": {
+          "description": "Продължителност на първия преход, когато лампите преминават от 'изключено' на 'включено' в секунди. ⏲️",
+          "name": "initial_transition"
+        },
+        "sleep_transition": {
+          "description": "Продължителност на прехода, когато се превключва \"режим на сън\" в секунди. 😴",
+          "name": "sleep_transition"
+        },
+        "max_brightness": {
+          "description": "Максимален процент на яркост. 💡",
+          "name": "max_brightness"
+        },
+        "max_color_temp": {
+          "description": "Най-студена цветова температура в Келвини. ❄️",
+          "name": "max_color_temp"
+        },
+        "min_brightness": {
+          "description": "Минимален процент на яркост. 💡",
+          "name": "min_brightness"
+        },
+        "min_color_temp": {
+          "description": "Най-топла цветова температура в Келвини. 🔥",
+          "name": "min_color_temp"
+        },
+        "only_once": {
+          "description": "Адаптира лампите само когато са включени ('true') или продължава да ги адаптира ('false'). 🔄",
+          "name": "only_once"
+        },
+        "prefer_rgb_color": {
+          "description": "Дали да се предпочита RGB цветова корекция пред температура на светлината, когато е възможно. 🌈",
+          "name": "prefer_rgb_color"
+        },
+        "separate_turn_on_commands": {
+          "description": "Използвайте отделни light.turn_on повиквания за цвят и яркост, необходими за някои типове светлини. 🔀",
+          "name": "separate_turn_on_commands"
+        },
+        "send_split_delay": {
+          "description": "Забавяне (милисекунди) между \"separate_turn_on_commands\" за лампи, които не поддържат едновременна настройка на яркост и цвят. ⏲️",
+          "name": "send_split_delay"
+        },
+        "sleep_brightness": {
+          "description": "Процент на яркостта на лампите в режим на сън. 😴",
+          "name": "sleep_brightness"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Използвай \"rgb_color\" или \"color_temp\" в режим на сън. 🌙",
+          "name": "sleep_rgb_or_color_temp"
+        },
+        "sleep_rgb_color": {
+          "description": "RGB цвят в режим на сън (използва се, когато sleep_rgb_or_color_temp е \"rgb_color\"). 🌈",
+          "name": "sleep_rgb_color"
+        },
+        "sleep_color_temp": {
+          "description": "Цветова температура в режим на сън (използва се, когато sleep_rgb_or_color_temp е \"color_temp\") в Келвини. 😴",
+          "name": "sleep_color_temp"
+        },
+        "sunrise_offset": {
+          "description": "Коригирайте времето на изгрев с положително или отрицателно отместване в секунди. ⏰",
+          "name": "sunrise_offset"
+        },
+        "sunrise_time": {
+          "description": "Задайте фиксирано време (HH:MM:SS) за изгрев. 🌅",
+          "name": "sunrise_time"
+        },
+        "sunset_offset": {
+          "description": "Коригирайте времето на залез с положително или отрицателно отместване в секунди. ⏰",
+          "name": "sunset_offset"
+        },
+        "sunset_time": {
+          "description": "Задайте фиксирано време (HH:MM:SS) за залез. 🌇",
+          "name": "sunset_time"
+        },
+        "max_sunrise_time": {
+          "description": "Задайте най-късното виртуално време за изгрев (HH:MM:SS), което позволява по-ранни изгреви. 🌅",
+          "name": "max_sunrise_time"
+        },
+        "min_sunset_time": {
+          "description": "Задайте най-ранното виртуално време за изгрев (HH:MM:SS), което позволява по-ранни залези. 🌇",
+          "name": "min_sunset_time"
+        },
+        "take_over_control": {
+          "description": "Деактивирайте адаптивното осветление, ако друг източник извика 'light.turn_on', докато лампите са включени и се адаптират. Обърнете внимание, че това извиква homeassistant.update_entity на всеки interval! 🔒",
+          "name": "take_over_control"
+        },
+        "detect_non_ha_changes": {
+          "description": "Открива и спира адаптации за промени в състоянието, които не са 'light.turn_on'. Изисква активиран 'take_over_control'. 🕵️ Внимание: ⚠️ Някои лампи може лъжливо да указват състояние ‘включено’, което може да доведе до неочаквано включване на лампите. Деактивирайте тази функция, ако се сблъскате с такива проблеми.",
+          "name": "detect_non_ha_changes"
+        },
+        "transition": {
+          "description": "Продължителност на прехода, когато лампите се променят, в секунди. 🕑",
+          "name": "transition"
+        },
+        "adapt_delay": {
+          "description": "Време за изчакване (в секунди) между включването на светлината и прилагането на промените от адаптивното осветление. Може да помогне за избягване на премигване. ⏲️",
+          "name": "adapt_delay"
+        },
+        "autoreset_control_seconds": {
+          "description": "Автоматично нулиране на ръчното управление след определен брой секунди. Задайте на 0, за да деактивирате. ⏲️",
+          "name": "autoreset_control_seconds"
+        }
+      }
+    }
+  }
+}

custom_components/adaptive_lighting/translations/bn.json

@@ -0,0 +1 @@
+{}

custom_components/adaptive_lighting/translations/ca.json

@@ -0,0 +1,217 @@
+{
+  "title": "Il·luminació Adaptativa",
+  "options": {
+    "step": {
+      "init": {
+        "data_description": {
+          "interval": "Freqüència d'adaptació de les llums, en segons. 🔄",
+          "transition": "Durada de la transició en canviar les llums, en segons. 🕑",
+          "sleep_brightness": "Percentatge de brillantor dels llums en mode nocturn. 😴",
+          "sleep_color_temp": "Temperatura de color en mode nocturn (s'utilitza quan `sleep_rgb_or_color_temp` és `color_temp`) en Kelvin. 😴"
+        },
+        "title": "Opcions Il·luminació Adaptativa",
+        "data": {
+          "lights": "lights: Llista d'entity_ids dels llums a controlar (pot estar buida). 🌟",
+          "min_brightness": "min_brightness: Percentatge mínim de brillantor. 💡",
+          "max_brightness": "max_brightness: Percentatge màxim de brillantor. 💡",
+          "min_color_temp": "min_color_temp: Temperatura de color més càlida en graus Kelvin. 🔥",
+          "max_color_temp": "max_color_temp: Temperatura de color més freda en graus Kelvin. ❄️"
+        },
+        "description": "Configura un component d'Adaptive Lighting. Els noms de les opcions s'alineen amb la configuració de YAML. Si has definit aquesta entrada a YAML, aquí no apareixerà cap opció. Per veure gràfics interactius que demostren efectes de paràmetres, visita [aquesta aplicació web]({webapp_url}). Per a més detalls, pots veure la [documentació oficial]({docs_url}).",
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "prefer_rgb_color: Si prefereixes l'ajustament del color RGB en lloc de la temperatura de color, quan sigui possible. 🌈",
+              "transition_until_sleep": "transition_until_sleep: Si s'activa, Adaptive Lighting considerarà els ajustaments del mode nocturn com a mínims, fent una transició cap aquests valors després de la posta de sol. 🌙",
+              "take_over_control": "take_over_control: Inhabilita Adaptive Lighting si una altra font crida `light.turn_on` quan les llums estan enceses i en procés d'adaptació. Tingues present que això cridarà `homeassistant.update_entity` cada `interval`! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: Detecta i atura les adaptacions per als canvis d'estat diferents a `light.turn_on`. Necessita que `take_over_control` estigui habilitat. 🕵️ Precaució: ⚠️ Alguns llums poden indicar falsament un estat \"encès\", cosa que podria provocar que els llums s'encenguin inesperadament. Desactiva aquesta funció si trobes aquests problemes.",
+              "only_once": "only_once: Adapta els llums només quan s'encenen (`true`) o segueix adaptant-les (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Quan s'encenen les llums inicialment. Si el valor és `true`, AL adapta només si s'ha cridat `light.turn_on` sense especificar color o brillantor. ❌🌈 Això impedeix l'adaptació quan s'activa una escena. Si el valor és `false`, AL adapta independentment de la presencia de color o brillantor en les dades inicials `service_data`. Necessita `take_over_control` habilitat. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Separa les crides de `light.turn_on` per a color i brillantor; necessari per alguns tipus de llums. 🔀",
+              "skip_redundant_commands": "skip_redundant_commands: Evita l'enviament de d'ordres d'adaptació als objectius on el seu estat ja és el conegut del llum. Minimitza el trànsit de la xarxa i millora la resposta de l'adaptació en alguns casos. 📉 Inhabilita-ho si l'estat físic del llum queda desincronitzat amb l'estat registrat a Home Assistant.",
+              "intercept": "intercept: Intercepta i adapta les crides `light.turn_on` per permetre canvis instantanis de color i brillantor. 🏎️ Inhabilita-ho per a llums que no admeten `light.turn_on` amb color i brillantor.",
+              "multi_light_intercept": "multi_light_intercept: Intercepta i adapta les crides `light.turn_on` dirigides a múltiples llums. ➗⚠️ Pot provocar la divisió d'una crida única `light.turn_on` en múltiples crides, com ara, quan les llums són en interruptors diferents. Necessita que `intercept` estigui habilitat.",
+              "include_config_in_attributes": "include_config_in_attributes: Mostra totes les opcions com atributs a l'interruptor de Home Assistant quan s'estableix com a `true`. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Durada de la primera transició quan els llums canvien de `off` a `on` en segons. ⏲️",
+              "sleep_rgb_or_color_temp": "Utilitza `\"rgb_color\"` o `\"color_temp\"` durant el mode nocturn. 🌙",
+              "sleep_rgb_color": "Color RGB en mode nocturn (s'utilitza quan `sleep_rgb_or_color_temp` és \"rgb_color\"). 🌈",
+              "sleep_transition": "Durada de la transició en commutar el \"mode nocturn\", en segons. 🕑",
+              "sunrise_time": "Indica una hora fixa (HH:MM:SS) per a la sortida del sol. 🌅",
+              "min_sunrise_time": "Defineix la sortida de sol virtual més primerenca (HH:MM:SS), tot permetent sortides de sol posteriors. 🌅",
+              "max_sunrise_time": "Defineix la sortida de sol virtual més tardana (HH:MM:SS), tot permetent sortides de sol abans. 🌅",
+              "sunrise_offset": "Ajusta l'hora de sortida del sol amb una compensació positiva o negativa en segons. ⏰",
+              "sunset_time": "Indica una hora fixa (HH:MM:SS) per a la posta de sol. 🌇",
+              "min_sunset_time": "Defineix la posta de sol virtual més primerenca (HH:MM:SS), tot permetent postes de sol més tard. 🌇",
+              "max_sunset_time": "Defineix la sortida virtual de sol virtual més tardana (HH:MM:SS), tot permetent sortides de sol abans. 🌇",
+              "sunset_offset": "Ajusta l'hora de la posta del sol amb una compensació positiva o negativa en segons. ⏰",
+              "brightness_mode": "Mode de brillantor a utilitzar. Els valors possibles són `default`, \"linear\" i \"tanh\" (utilitza `brightness_mode_time_dark` i `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(S'ignora si `brightness_mode='default'`) La durada en segons de la variació de la brillantor abans/despres de la sortida/posta de sol. 📈📉.",
+              "brightness_mode_time_light": "(S'ignora si `brightness_mode='default'`) La durada en segons de la variació de la brillantor abans/despres de la sortida/posta de sol. 📈📉.",
+              "autoreset_control_seconds": "Restableix automàticament el control manual al cap d'uns segons. Posar a 0 per desactivar. ⏲️",
+              "send_split_delay": "Retard (ms) entre `separate_turn_on_commands` per als llums que no admeten la configuració simultània de brillantor i color. ⏲️",
+              "adapt_delay": "Temps d'espera (en segons) entre l'encesa de la llum i els canvis per part d'Adaptive Lighting. Pot ajudar a evitar els parpalleigs. ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "Opció invàlida",
+      "entity_missing": "Una o més de les entitats de llum seleccionades no es troba a Home Assistant"
+    }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "only_once": {
+          "description": "Ajustar les llums només quan s'encenguin (`true`) o ajustar contínuament(`false`). 🔄"
+        },
+        "sleep_color_temp": {
+          "description": "Temperatura de color en mode nocturn (s'utilitza quan `sleep_rgb_or_color_temp` és `color_temp`) en Kelvin. 😴"
+        },
+        "sunrise_offset": {
+          "description": "Ajusta l'hora de sortida del sol amb una compensació positiva o negativa en segons. ⏰"
+        },
+        "sunset_offset": {
+          "description": "Ajusta l'hora de la posta del sol amb una compensació positiva o negativa en segons. ⏰"
+        },
+        "autoreset_control_seconds": {
+          "description": "Restableix automàticament el control manual al cap d'uns segons. Posar a 0 per desactivar. ⏲️"
+        },
+        "sleep_brightness": {
+          "description": "Percentatge de brillantor dels llums en mode nocturn. 😴"
+        },
+        "max_color_temp": {
+          "description": "Temperatura de color més freda en Kelvin. ❄️"
+        },
+        "send_split_delay": {
+          "description": "Retard (ms) entre `separate_turn_on_commands` per als llums que no admeten la configuració simultània de brillantor i color. ⏲️"
+        },
+        "detect_non_ha_changes": {
+          "description": "Detecta i atura les adaptacions per als canvis d'estat diferents a `light.turn_on`. Necessita que `take_over_control` estigui habilitat. 🕵️ Precaució: ⚠️ Alguns llums poden indicar falsament un estat \"encès\", cosa que podria provocar que els llums s'encenguin inesperadament. Desactiva aquesta funció si trobes aquests problemes."
+        },
+        "take_over_control": {
+          "description": "Desactiva Adaptive Lighting si una altra font crida `light.turn_on` mentre els llums estan encesos i adaptats. Tingues en compte que això crida `homeassistant.update_entity` cada `interval`! 🔒"
+        },
+        "entity_id": {
+          "description": "ID de la entitat de l'interruptor. 📝"
+        },
+        "turn_on_lights": {
+          "description": "Si s'encenen les llums que estan apagades en aquest moment. 🔆"
+        },
+        "initial_transition": {
+          "description": "Durada de la primera transició quan els llums canvien `off` a `on` en segons. ⏲️"
+        },
+        "sleep_transition": {
+          "description": "Durada de la transició en commutar el \"mode nocturn\", en segons. 🕑"
+        },
+        "max_brightness": {
+          "description": "Percentatge màxim de brillantor. 💡"
+        },
+        "min_brightness": {
+          "description": "Percentatge mínim de brillantor. 💡"
+        },
+        "prefer_rgb_color": {
+          "description": "Si es prefereix ajustar el color RGB en lloc de la temperatura de color, quan sigui possible. 🌈"
+        },
+        "min_color_temp": {
+          "description": "Temperatura de color més càlida, en graus Kelvin. 🔥"
+        },
+        "separate_turn_on_commands": {
+          "description": "Utilitza crides independents per a `light.turn_on` per color i brillantor; necessari per alguns tipus de llums. 🔀"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Utilitza `\"rgb_color\"` o `\"color_temp\"` durant el mode nocturn. 🌙"
+        },
+        "sleep_rgb_color": {
+          "description": "Color RGB en mode nocturn (s'utilitza quan `sleep_rgb_or_color_temp` és \"rgb_color\"). 🌈"
+        },
+        "sunrise_time": {
+          "description": "Indica una hora fixa (HH:MM:SS) per a la sortida del sol. 🌅"
+        },
+        "sunset_time": {
+          "description": "Indica una hora fixa (HH:MM:SS) per a la posta de sol. 🌇"
+        },
+        "transition": {
+          "description": "Durada de la transició en canviar les llums, en segons. 🕑"
+        },
+        "adapt_delay": {
+          "description": "Temps d'espera (en segons) entre l'encesa de la llum i els canvis per part d'Adaptive Lighting. Pot ajudar a evitar els parpalleigs. ⏲️"
+        },
+        "use_defaults": {
+          "description": "Defineix els valors per defecte que no s'especifiquin a la crida del servei. Opcions: \"current\" (per defecte, manté els valors actuals), \"factory\" (restaura els valors documentats per defecte), o \"configuration\" (retorna als valors per defecte de l'interruptor). ⚙️"
+        },
+        "include_config_in_attributes": {
+          "description": "Mostra totes les opcions com a atributs de l'interruptor a Home Assistant quan es defineixi com a `true`. 📝"
+        },
+        "max_sunrise_time": {
+          "description": "Defineix la sortida de sol virtual més tardana (HH:MM:SS), tot permetent sortides de sol abans. 🌅"
+        },
+        "min_sunset_time": {
+          "description": "Defineix la posta de sol virtual més primerenca (HH:MM:SS), tot permetent postes de sol més tard. 🌇"
+        }
+      },
+      "description": "Canvia les opcions de configuració que vulguis al commutador. Totes les opcions d'aquí són les mateixes que en el flux de configuració."
+    },
+    "apply": {
+      "fields": {
+        "lights": {
+          "description": "Una llum (o una llista de llums) a la qual aplicar la configuració. 💡"
+        },
+        "transition": {
+          "description": "Durada de la transició en canviar les llums, en segons. 🕑"
+        },
+        "prefer_rgb_color": {
+          "description": "Si es prefereix ajustar el color RGB en lloc de la temperatura de color, quan sigui possible. 🌈"
+        },
+        "turn_on_lights": {
+          "description": "Si s'encenen les llums que estan apagades en aquest moment. 🔆"
+        },
+        "entity_id": {
+          "description": "L'`entity_id` de l'interruptor amb els paràmetres per aplicar. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Si cal adaptar la brillantor del llum. 🌞"
+        },
+        "adapt_color": {
+          "description": "Si cal adaptar el color a les llums que ho admetin. 🌈"
+        }
+      },
+      "description": "Aplica la configuració actual d'Adaptive Lighting a les llums."
+    },
+    "set_manual_control": {
+      "description": "Indica quan una llum està 'controlada manualment'.",
+      "fields": {
+        "lights": {
+          "description": "entity_id(s) de les llums; si no s'especifica es seleccionaran totes les llums de l'interruptor. 💡"
+        },
+        "entity_id": {
+          "description": "L'`entity_id` de l'interruptor al qual (des)marcar el llum com a `manually controlled`. 📝"
+        },
+        "manual_control": {
+          "description": "Si cal afegir (\"true\") o treure (\"false\") el llum de la llista de \"manual_control\". 🔒"
+        }
+      }
+    }
+  },
+  "config": {
+    "step": {
+      "user": {
+        "title": "Tria un nom per a la instància d'Adaptive Lighting",
+        "description": "Cada instància pot contenir múltiples llums!"
+      },
+      "menu": {
+        "title": "Crear o Duplicar",
+        "description": "Vols crear una nova instància, o duplicar-ne una d'existent?",
+        "data": {
+          "action": "Acció"
+        }
+      }
+    },
+    "abort": {
+      "already_configured": "Aquest dispositiu ja està configurat"
+    }
+  }
+}

custom_components/adaptive_lighting/translations/cs.json

@@ -8,6 +8,10 @@
         "data": {
           "name": "Název"
         }
+      },
+      "menu": {
+        "title": "Vytvořit nebo duplikovat",
+        "description": "Chcete vytvořit novou instanci nebo duplikovat stávající?"
       }
     },
     "abort": {
@@ -17,35 +21,73 @@
   "options": {
     "step": {
       "init": {
-        "title": "Nastavení adaptivního osvětlení",
-        "description": "Všechna nastavení komponenty Adaptivního osvětlení. Názvy možností odpovídají nastavení YAML. Pokud máte v konfiguraci YAML definovánu položku 'adaptive_lighting', nezobrazí se žádné možnosti.",
+        "title": "Nastavení Adaptivního osvětlení",
+        "description": "Nakonfigurujte komponentu Adaptive Lighting. Názvy voleb odpovídají nastavení YAML. Pokud je tato položka definována v YAML, žádné volby se zde nezobrazí. Interaktivní grafy znázorňující vliv parametrů najdete v [této webové aplikaci]({webapp_url}). Další podrobnosti najdete v [oficiální dokumentaci]({docs_url}).",
         "data": {
-          "lights": "osvětlení",
-          "initial_transition": "initial_transition: Prodlení pro změnu z 'vypnuto' do 'zapnuto' (sekundy)",
-          "sleep_transition": "sleep_transition: Prodleva pro přepnutí do „režimu spánku“ (sekundy)",
+          "lights": "lights: Seznam světel (entity_id), které mají být ovládané (může být prázdný). 🌟",
           "interval": "interval: Prodleva pro změny osvětlení (v sekundách)",
-          "max_brightness": "max_brightness: Nejvyšší jas osvětlení během cyklu. (%)",
-          "max_color_temp": "max_color_temp: Nejchladnější odstín cyklu teploty barev. (Kelvin)",
+          "transition": "",
           "min_brightness": "min_brightness: Nejnižší jas osvětlení během cyklu. (%)",
+          "max_brightness": "max_brightness: Nejvyšší jas osvětlení během cyklu. (%)",
           "min_color_temp": "min_color_temp, Nejteplejší odstín cyklu teploty barev. (Kelvin)",
-          "only_once": "only_once: Přizpůsobení osvětlení pouze při rozsvícení.",
-          "prefer_rgb_color": "prefer_rgb_color: Upřednostněte použití 'rgb_color' před 'color_temp'.",
-          "separate_turn_on_commands": "separate_turn_on_commands: Oddělení příkazů pro každý atribut (barva, jas, atd.) v atributu 'light.turn_on' (vyžadováno pro některá světla).",
-          "send_split_delay": "send_split_delay: prodleva mezi příkazy (milisekundy), když je použit atribut 'separate_turn_on_commands'. Může zajistit správné zpracování obou příkazů.",
+          "max_color_temp": "max_color_temp: Nejchladnější odstín cyklu teploty barev. (Kelvin)",
           "sleep_brightness": "sleep_brightness, Nastavení jasu pro režim spánku. (%)",
-          "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp, použijte 'rgb_color' nebo 'color_temp'",
-          "sleep_rgb_color": "sleep_rgb_color, v RGB",
-          "sleep_color_temp": "sleep_color_temp: Nastavení teploty barev pro režim spánku. (v Kelvinech)",
-          "sunrise_offset": "sunrise_offset: Jak dlouho před (-) nebo po (+) definovat bod cyklu východu slunce (+/- v sekundách)",
-          "sunrise_time": "sunrise_time: Manuální přepsání času východu slunce, pokud je „None“, použije se skutečný čas východu slunce ve vaší lokalitě (HH:MM:SS)",
-          "max_sunrise_time": "max_sunrise_time: Ruční přepsání nejpozdějšího času východu slunce, pokud je „None“, použije se skutečný čas východu slunce vaší lokality (HH:MM:SS)",
-          "sunset_offset": "sunset_offset: Jak dlouho před (-) nebo po (+) definovat bod cyklu západu slunce (+/- v sekundách)",
-          "sunset_time": "sunset_time: Ruční přepsání času západu slunce, pokud je „None“, použije se skutečný čas západu slunce vaší lokality (HH:MM:SS)",
-          "min_sunset_time": "min_sunset_time: Ruční přepsání nejdřívějšího času západu slunce, pokud je „None“, použije se skutečný čas západu slunce vaší lokality (HH:MM:SS)",
-          "take_over_control": "take_over_control: Je-li volán 'light.turn_on' z jiného zdroje, než Adaptivním osvětlením, když je světlo již rozsvíceno, přestaňte toto světlo ovládat, dokud není vypnuto -> zapnuto (nebo i vypínačem).",
-          "detect_non_ha_changes": "detect_non_ha_changes: detekuje všechny změny >10%  provedených pro osvětlení (také mimo HA), vyžaduje povolení atributu 'take_over_control' (každý 'interval' spouští 'homeassistant.update_entity'!)",
-          "transition": "transition: doba přechodu při změně osvětlení (sekundy)",
-          "adapt_delay": "adapt_delay: prodleva mezi zapnutím světla ( sekundy) a projevem změny v Adaptivní osvětlení. Může předcházet blikání."
+          "sleep_color_temp": "sleep_color_temp: Nastavení teploty barev pro režim spánku. (v Kelvinech)"
+        },
+        "data_description": {
+          "interval": "Frekvence přizpůsobení světel v sekundách. 🔄",
+          "transition": "Doba trvání přechodu změny světel v sekundách. 🕑",
+          "sleep_brightness": "Jas světel během režimu spánku (v %). 😴",
+          "sleep_color_temp": "Teplota barev v režimu spánku (používá se, když `sleep_rgb_or_color_temp` je `color_temp`) v Kelvinech. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition: Prodlení pro změnu z 'vypnuto' do 'zapnuto' (sekundy)",
+              "prefer_rgb_color": "prefer_rgb_color: Upřednostněte použití 'rgb_color' před 'color_temp'.",
+              "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp, použijte 'rgb_color' nebo 'color_temp'",
+              "sleep_rgb_color": "sleep_rgb_color, v RGB",
+              "sleep_transition": "sleep_transition: Prodleva pro přepnutí do „režimu spánku“ (sekundy)",
+              "transition_until_sleep": "transition_until_sleep: Pokud je zapnuto, Adaptive Lighting bude zacházet s nastavením spánku jako s minimem, na tyto hodnoty přejde po západu slunce. 🌙",
+              "sunrise_time": "sunrise_time: Manuální přepsání času východu slunce, pokud je „None“, použije se skutečný čas východu slunce ve vaší lokalitě (HH:MM:SS)",
+              "max_sunrise_time": "max_sunrise_time: Ruční přepsání nejpozdějšího času východu slunce, pokud je „None“, použije se skutečný čas východu slunce vaší lokality (HH:MM:SS)",
+              "sunrise_offset": "sunrise_offset: Jak dlouho před (-) nebo po (+) definovat bod cyklu východu slunce (+/- v sekundách)",
+              "sunset_time": "sunset_time: Ruční přepsání času západu slunce, pokud je „None“, použije se skutečný čas západu slunce vaší lokality (HH:MM:SS)",
+              "min_sunset_time": "min_sunset_time: Ruční přepsání nejdřívějšího času západu slunce, pokud je „None“, použije se skutečný čas západu slunce vaší lokality (HH:MM:SS)",
+              "sunset_offset": "sunset_offset: Jak dlouho před (-) nebo po (+) definovat bod cyklu západu slunce (+/- v sekundách)",
+              "take_over_control": "take_over_control: Je-li volán 'light.turn_on' z jiného zdroje, než Adaptivním osvětlením, když je světlo již rozsvíceno, přestaňte toto světlo ovládat, dokud není vypnuto -> zapnuto (nebo i vypínačem).",
+              "detect_non_ha_changes": "detect_non_ha_changes: detekuje všechny změny >10%  provedených pro osvětlení (také mimo HA), vyžaduje povolení atributu 'take_over_control' (každý 'interval' spouští 'homeassistant.update_entity'!)",
+              "only_once": "only_once: Přizpůsobení osvětlení pouze při rozsvícení.",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Jenom při prvním zapnutí světel. Je-li nastaveno na `true`, AL udělá přizpůsobení pouze tehdy, je-li vyvoláno `light.turn_on` bez zadání barvy nebo jasu. ❌🌈 Tím se zabrání přizpůsobení např. při aktivaci scény. Pokud je `false`, AL udělá přizpůsobení bez ohledu na přítomnost barvy nebo jasu `service_data` volání. Vyžaduje zapnutí `take_over_control`. 🕵️ ",
+              "separate_turn_on_commands": "separate_turn_on_commands: Oddělení příkazů pro každý atribut (barva, jas, atd.) v atributu 'light.turn_on' (vyžadováno pro některá světla).",
+              "send_split_delay": "send_split_delay: prodleva mezi příkazy (milisekundy), když je použit atribut 'separate_turn_on_commands'. Může zajistit správné zpracování obou příkazů.",
+              "adapt_delay": "",
+              "skip_redundant_commands": "skip_redundant_commands: Přeskočí odesílání adaptačních příkazů, jejichž cílový stav se již rovná známému stavu světla. Minimalizuje síťový provoz a v některých situacích zlepšuje odezvu adaptace. 📉Zakažte, pokud se fyzické stavy světel dostanou mimo synchronizaci se zaznamenaným stavem HA.",
+              "intercept": "intercept: Zachytit a přizpůsobit volání `light.turn_on` a umožnit tak okamžité přizpůsobení barev a jasu. 🏎️ Zakažte pro světla, která nepodporují `light.turn_on` s barvou a jasem najednou.",
+              "multi_light_intercept": "multi_light_intercept: Zachytí a přizpůsobí volání `light.turn_on`, která se zaměřují na více světel. ➗⚠️ To může vést k rozdělení jednoho volání `light.turn_on` na více volání, např. když jsou světla v různých vypínačích. Vyžaduje, aby bylo povoleno `intercept`.",
+              "include_config_in_attributes": "include_config_in_attributes: Zobrazit všechny možnosti jako atributy přepínače v Home Assistant, pokud je nastaveno na `true`. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Doba trvání prvního přechodu, kdy se světla změní z `vypnuto` na `zapnuto`, v sekundách. ⏲️",
+              "sleep_rgb_or_color_temp": "V režimu spánku se použije buď `\"rgb_color\"`, nebo `\"color_temp\"`. 🌙",
+              "sleep_rgb_color": "RGB barva v režimu spánku (používané když `sleep_rgb_or_color_temp` je \"rgb_color\"). 🌈",
+              "sleep_transition": "Doba trvání přechodu do režimu spánku v sekundách. 😴",
+              "sunrise_time": "Nastavit pevný čas (HH:MM:SS) pro východ slunce. 🌅",
+              "min_sunrise_time": "Nastavte nejbližší virtuální čas východu slunce (HH:MM:SS), abyste mohli nastavit pozdější východ slunce. 🌅",
+              "max_sunrise_time": "Nastavte nejpozdější virtuální čas východu slunce (HH:MM:SS), což umožňuje dřívější východ slunce. 🌅",
+              "sunrise_offset": "Upravte čas východu slunce o sekundy dopředu nebo dozadu. ⏰",
+              "sunset_time": "Nastavit pevný čas (HH:MM:SS) pro západ slunce. 🌅",
+              "min_sunset_time": "Nastavte nejbližší virtuální čas západu slunce (HH:MM:SS), abyste mohli nastavit pozdější západ slunce. 🌅",
+              "max_sunset_time": "Nastavte nejpozdější virtuální čas západu slunce (HH:MM:SS), což umožňuje dřívější západ slunce. 🌅",
+              "sunset_offset": "Upravte čas západu slunce o sekundy dopředu nebo dozadu. ⏰",
+              "brightness_mode": "Výběr režimu jasu. Možné hodnoty jsou `default`, `linear` a `tanh` (používá `brightness_mode_time_dark` a `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(Ignorováno, pokud `brightness_mode='default'`) Doba trvání v sekundách pro zvýšení/snížení jasu po/před východem/západem slunce. 📈📉.",
+              "brightness_mode_time_light": "(Ignorováno, pokud `brightness_mode='default'`) Doba trvání v sekundách pro zvýšení/snížení jasu po/před východem/západem slunce. 📈📉.",
+              "autoreset_control_seconds": "Automatické resetování ručního ovládání po určitém počtu sekund. Nastavením na 0 se vypne. ⏲️",
+              "send_split_delay": "Zpoždění (ms) mezi příkazy `separate_turn_on_commands` pro světla, která nepodporují současné nastavení jasu a barvy. ⏲️",
+              "adapt_delay": "Doba čekání (v sekundách) mezi zapnutím světla a změnou adaptivního osvětlení. Mohlo by to pomoci zabránit blikání. ⏲️"
+            }
+          }
         }
       }
     },
@@ -53,5 +95,139 @@
       "option_error": "Neplatná možnost",
       "entity_missing": "V aplikaci Home Assistant chybí jedna nebo více vybraných entit osvětlení"
     }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sleep_brightness": {
+          "description": "Jas světel během režimu spánku (v %). 😴"
+        },
+        "detect_non_ha_changes": {
+          "description": "Zjistí a zastaví adaptace při změnách stavu, které nejsou ve stavu `light.turn_on`. Nutno mít zapnutou funkci `take_over_control`. 🕵️ Upozornění: ⚠️ Některá světla mohou falešně indikovat stav 'zapnuto', což může vést k neočekávanému zapnutí světel. Pokud se s takovými problémy setkáte, zakažte tuto funkci."
+        },
+        "sunrise_offset": {
+          "description": "Upravte čas východu slunce o sekundy dopředu nebo dozadu. ⏰"
+        },
+        "max_sunrise_time": {
+          "description": "Nastavte nejpozdější virtuální čas východu slunce (HH:MM:SS), což umožňuje dřívější východ slunce. 🌅"
+        },
+        "sleep_color_temp": {
+          "description": "Teplota barev v režimu spánku (používá se, když `sleep_rgb_or_color_temp` je `color_temp`) v Kelvinech. 😴"
+        },
+        "min_brightness": {
+          "description": "Minimální hodnota jasu. 💡"
+        },
+        "min_color_temp": {
+          "description": "Nejvyšší teplota barvy v Kelvinech. 🔥"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "V režimu spánku se použije buď `\"rgb_color\"`, nebo `\"color_temp\"`. 🌙"
+        },
+        "turn_on_lights": {
+          "description": "Zda se mají zapnout světla, která jsou aktuálně vypnutá. 🔆"
+        },
+        "initial_transition": {
+          "description": "Doba trvání prvního přechodu, kdy se světla změní z `vypnuto` na `zapnuto`, v sekundách. ⏲️"
+        },
+        "entity_id": {
+          "description": "Entita ID přepínače. 📝"
+        },
+        "sunrise_time": {
+          "description": "Nastavit pevný čas (HH:MM:SS) pro východ slunce. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "Zobrazení všech možností jako atributů přepínače v aplikaci Home Assistant, pokud je zaškrtnuto. 📝"
+        },
+        "max_brightness": {
+          "description": "Maximální hodnota jasu. 💡"
+        },
+        "sleep_rgb_color": {
+          "description": "RGB barva v režimu spánku (používané když `sleep_rgb_or_color_temp` je \"rgb_color\"). 🌈"
+        },
+        "take_over_control": {
+          "description": "Zakáže adaptivní osvětlení, pokud jiný zdroj volá `light.turn_on`, zatímco jsou světla zapnutá a přizpůsobují se. Vemte na vědomí, že `homeassistant.update_entity` volá každý `interval`! 🔒"
+        },
+        "sleep_transition": {
+          "description": "Doba trvání přechodu do režimu spánku v sekundách. 😴"
+        },
+        "autoreset_control_seconds": {
+          "description": "Automatické resetování ručního ovládání po určitém počtu sekund. Nastavením na 0 se vypne. ⏲️"
+        },
+        "adapt_delay": {
+          "description": "Doba čekání (v sekundách) mezi zapnutím světla a změnou adaptivního osvětlení. Mohlo by to pomoci zabránit blikání."
+        },
+        "only_once": {
+          "description": "Přizpůsobit světla pouze při zapnutí (`true`) nebo je průběžně přizpůsobovat (`false`). 🔄"
+        },
+        "use_defaults": {
+          "description": "Nastaví výchozí hodnoty, které nebyly zadány v tomto volání služby. Možnosti: \"stávající\" (výchozí, zachovává aktuální hodnoty), \"výchozí\" (obnovuje do výchozích hodnot) nebo \"konfigurace\" (vrací výchozí hodnoty konfigurace přepínače). ⚙️"
+        },
+        "separate_turn_on_commands": {
+          "description": "Použití samostatných volání `light.turn_on` pro barvu a jas, které jsou potřebné pro některé typy světel. 🔀"
+        },
+        "prefer_rgb_color": {
+          "description": "Zda upřednostnit nastavení barev RGB před teplotou barev světla, pokud je to možné. 🌈"
+        },
+        "max_color_temp": {
+          "description": "Nejchladnější teplota barvy v Kelvinech. ❄️"
+        },
+        "sunset_offset": {
+          "description": "Upravte čas západu slunce o sekundy dopředu nebo dozadu. ⏰"
+        },
+        "send_split_delay": {
+          "description": "Zpoždění (ms) mezi příkazy `separate_turn_on_commands` pro světla, která nepodporují současné nastavení jasu a barvy. ⏲️"
+        },
+        "sunset_time": {
+          "description": "Nastavit pevný čas (HH:MM:SS) pro západ slunce. 🌅"
+        },
+        "transition": {
+          "description": "Doba trvání přechodu změny světel v sekundách. 🕑"
+        },
+        "min_sunset_time": {
+          "description": "Nastavte nejbližší virtuální čas západu slunce (HH:MM:SS), abyste mohli nastavit pozdější západ slunce. 🌅"
+        }
+      },
+      "description": "V přepínači změňte libovolné nastavení. Všechny možnosti jsou zde stejné jako v konfiguračním souboru."
+    },
+    "apply": {
+      "fields": {
+        "entity_id": {
+          "description": "`entity_id` přepínače s nastavením, které se má použít. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Přizpůsobení jasu světla. 🌞"
+        },
+        "turn_on_lights": {
+          "description": "Zda se mají zapnout světla, která jsou aktuálně vypnutá. 🔆"
+        },
+        "adapt_color": {
+          "description": "Zda se má přizpůsobit barva na podporovaných světlech. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Zda upřednostnit nastavení barev RGB před teplotou barev světla, pokud je to možné. 🌈"
+        },
+        "lights": {
+          "description": "Světlo (nebo seznam světel), na které se má nastavení aplikovat. 💡"
+        },
+        "transition": {
+          "description": "Doba trvání přechodu změny světel v sekundách. 🕑"
+        }
+      },
+      "description": "Aplikuje současné nastavení Adaptivního osvětlení na světla."
+    },
+    "set_manual_control": {
+      "fields": {
+        "manual_control": {
+          "description": "Zda přidat (\"true\") nebo odebrat (\"false\") světlo ze seznamu \"manual_control\". 🔒"
+        },
+        "entity_id": {
+          "description": "`entity_id` spínače, ve kterém se světlo (ne)označí jako `ručně ovládané`. 📝"
+        },
+        "lights": {
+          "description": "entity_id(s) světel, pokud není zadáno jinak, jsou vybrána všechna světla ve spínači. 💡"
+        }
+      },
+      "description": "Označte, zda je světlo \"ručně ovládané\"."
+    }
   }
 }

custom_components/adaptive_lighting/translations/da.json

@@ -8,6 +8,11 @@
         "data": {
           "name": "Navn"
         }
+      },
+      "menu": {
+        "data": {
+          "action": "Handling"
+        }
       }
     },
     "abort": {
@@ -18,27 +23,65 @@
     "step": {
       "init": {
         "title": "Adaptiv Belysnings indstillinger",
-        "description": "Alle indstillinger tilhørende en Adaptiv Belysnings komponent. Indstillingernes navne svarer til YAML indstillingernes. Ingen indstillinger vises hvis du allerede har konfigureret den i YAML.",
+        "description": "Alle indstillinger tilhørende en Adaptiv Belysnings komponent. Indstillingernes navne svarer til YAML indstillingernes. Ingen indstillinger vises hvis du allerede har konfigureret den i YAML. For interaktive grafer, der viser parametereffekter, besøg [denne webapp]({webapp_url}). Yderligere detaljer finder du i den [officielle dokumentation]({docs_url}).",
         "data": {
           "lights": "lights: lyskilder",
-          "initial_transition": "initial_transition: Hvor lang overgang når lyset går fra 'off' til 'on' eller når 'sleep_state' skiftes. (i sekunder)",
           "interval": "interval: Tid imellem opdateringer (i sekunder)",
-          "max_brightness": "max_brightness: Højeste lysstyrke i cyklussen. (%)",
-          "max_color_temp": "max_color_temp: Koldeste lystemperatur i cyklussen. (Kelvin)",
+          "transition": "Overgangsperiode når en ændring i lyset udføres (i sekunder)",
           "min_brightness": "min_brightness: Laveste lysstyrke i cyklussen. (%)",
+          "max_brightness": "max_brightness: Højeste lysstyrke i cyklussen. (%)",
           "min_color_temp": "min_color_temp: Varmeste lystemperatur i cyklussen. (Kelvin)",
-          "only_once": "only_once: Juster udelukkende lysene adaptivt i øjeblikket de tændes.",
-          "prefer_rgb_color": "prefer_rgb_color: Brug 'rgb_color' istedet for 'color_temp' når muligt.",
-          "separate_turn_on_commands": "separate_turn_on_commands: Adskil kommandoerne for hver attribut (color, brightness, etc.) ved 'light.turn_on' (nødvendigt for bestemte lys).",
+          "max_color_temp": "max_color_temp: Koldeste lystemperatur i cyklussen. (Kelvin)",
           "sleep_brightness": "sleep_brightness, Lysstyrke for Sleep Mode. (%)",
-          "sleep_color_temp": "sleep_color_temp: Farvetemperatur under Sleep Mode. (Kelvin)",
-          "sunrise_offset": "sunrise_offset: Hvor længe før (-) eller efter (+) at definere solopgangen i cyklussen (+/- sekunder)",
-          "sunrise_time": "sunrise_time: Manuel overstyring af solopgangstidspunktet, hvis 'None', bruges det egentlige tidspunkt din lokation. (HH:MM:SS)",
-          "sunset_offset": "sunset_offset: Hvor længe før (-) eller efter (+) at definere solnedgangen i cyklussen (+/- sekunder)",
-          "sunset_time": "sunset_time: Manuel overstyring af solnedgangstidspunktet, hvis 'None', bruges det egentlige tidspunkt for din lokation. (HH:MM:SS)",
-          "take_over_control": "take_over_control: Hvis andet end Adaptiv Belysning kalder 'light.turn_on' på et lys der allerede er tændt, afbryd adaptering af lyset indtil at det tændes igen.",
-          "detect_non_ha_changes": "detect_non_ha_changes: Registrer alle ændringer på >10% på et lys (også udenfor HA), kræver at 'take_over_control' er slået til (kalder 'homeassistant.update_entity' hvert 'interval'!)",
-          "transition": "Overgangsperiode når en ændring i lyset udføres (i sekunder)"
+          "sleep_color_temp": "sleep_color_temp: Farvetemperatur under Sleep Mode. (Kelvin)"
+        },
+        "data_description": {
+          "interval": "Frekvens til at tilpasse lysene, i sekunder. 🔄",
+          "transition": "Varighed af overgang, når lys ændres, i sekunder. 🕑",
+          "sleep_brightness": "Lysstyrkeprocent af lys i søvntilstand. 😴",
+          "sleep_color_temp": "Farvetemperatur i søvntilstand (bruges når `sleep_rgb_or_color_temp` er `color_temp`) i Kelvin. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition: Hvor lang overgang når lyset går fra 'off' til 'on' eller når 'sleep_state' skiftes. (i sekunder)",
+              "prefer_rgb_color": "prefer_rgb_color: Brug 'rgb_color' istedet for 'color_temp' når muligt.",
+              "transition_until_sleep": "overgang_til_sove: Når aktiveret, vil adaptiv belysning behandle søvnindstillinger som minimum, og overgår til disse værdier efter solnedgang. 🌙",
+              "sunrise_time": "sunrise_time: Manuel overstyring af solopgangstidspunktet, hvis 'None', bruges det egentlige tidspunkt din lokation. (HH:MM:SS)",
+              "sunrise_offset": "sunrise_offset: Hvor længe før (-) eller efter (+) at definere solopgangen i cyklussen (+/- sekunder)",
+              "sunset_time": "sunset_time: Manuel overstyring af solnedgangstidspunktet, hvis 'None', bruges det egentlige tidspunkt for din lokation. (HH:MM:SS)",
+              "sunset_offset": "sunset_offset: Hvor længe før (-) eller efter (+) at definere solnedgangen i cyklussen (+/- sekunder)",
+              "take_over_control": "take_over_control: Hvis andet end Adaptiv Belysning kalder 'light.turn_on' på et lys der allerede er tændt, afbryd adaptering af lyset indtil at det tændes igen.",
+              "detect_non_ha_changes": "detect_non_ha_changes: Registrer alle ændringer på >10% på et lys (også udenfor HA), kræver at 'take_over_control' er slået til (kalder 'homeassistant.update_entity' hvert 'interval'!)",
+              "only_once": "only_once: Juster udelukkende lysene adaptivt i øjeblikket de tændes.",
+              "adapt_only_on_bare_turn_on": "tilpas_kun_ved_enkelt_tænd: Når du tænder lys for første gang. Hvis indstillet til 'true', tilpasser AL kun, hvis 'lys.tænd' er kaldt uden at angive farve eller lysstyrke. ❌🌈 Dette forhindrer f.eks. tilpasning, når du aktiverer en scene. Hvis indstillet til 'false' tilpasser AL sig uanset tilstanden af farve eller lysstyrke i den oprindelige 'service_data'. Har brug for at 'take_over_control' er aktiveret. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Adskil kommandoerne for hver attribut (color, brightness, etc.) ved 'light.turn_on' (nødvendigt for bestemte lys).",
+              "skip_redundant_commands": "skip_redundant_commands: Undlad at sende tilpasningskommando, hvis lampens kendte tilstand allerede er lig den ønskede tilstand. Mindsker mængden af netværkstrafik og forbedrer tilpasningens responsivitet i visse situationer. 📉 Slå fra, hvis lampens faktiske tilstand kommer ud af takt med den tilstand, som HA rapporterer.",
+              "intercept": "intercept: Indfang og tilpas »light.turn_on«-kald for at muliggøre øjeblikkelig farve- og lysstyrketilpasning. 🏎️ Slå fra for lyskilder, som ikke understøtter »light.turn_on« med farve og lysstyrke.",
+              "multi_light_intercept": "multi_light_intercept: Indfang og tilpas »light.turn_on«-kald til mere end en enkelt lyskilde. ➗⚠️ Dette kan bevirke at et enkelt »light.turn_on«-kald deles op i flere, f.eks. hvis lyskilderne er forbundet til forskellige kontakter. Forudsætter at »intercept« er slået til.",
+              "include_config_in_attributes": "include_config_in_attributes: Vis alle indstillinger som attributter for kontakten når dette er sat til »true«. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Den første overgangs varighed når lysene ændres fra »off« til »on« i sekunder. ⏲️",
+              "sleep_rgb_or_color_temp": "Brug enten `\"rgb_farve\"` eller `\"farve_temp\"` i søvntilstand. 🌙",
+              "sleep_rgb_color": "RGB-farve i søvntilstand (anvendes når »sleep_rgb_or_color_temp« er sat til »rgb_color«). 🌈",
+              "sleep_transition": "Varigheden af overgangen, når \"sovetilstand\" skiftes, i sekunder. 😴",
+              "sunrise_time": "Sæt en fast tid (HH:MM:SS) for solopgang. 🌅",
+              "min_sunrise_time": "Indstil den tidligste virtuelle solopgangstid (HH:MM:SS), hvilket giver mulighed for senere solopgange. 🌅",
+              "max_sunrise_time": "Indstil den seneste virtuelle solopgangstid (HH:MM:SS), hvilket giver mulighed for tidligere solopgange. 🌅",
+              "sunrise_offset": "Juster solopgangstiden med en positiv eller negativ offset på få sekunder. ⏰",
+              "sunset_time": "Sæt en fast tid (HH:MM:SS) for solnedgang. 🌇",
+              "min_sunset_time": "Indstil den tidligste virtuelle solnedgangstid (HH:MM:SS), hvilket giver mulighed for senere solnedgange. 🌇",
+              "max_sunset_time": "Indstil den seneste virtuelle solnedgangstid (HH:MM:SS), hvilket giver mulighed for tidligere solnedgange. 🌇",
+              "sunset_offset": "Juster solnedgang tid med et positivt eller negativt offset, i sekunder. ⏰",
+              "brightness_mode": "Lysstyrketilstand til brug. Mulige værdier er \"default\", \"linear\" og \"tanh\" (bruger \"brightness_mode_time_dark\" og \"brightness_mode_time_light\"). 📈",
+              "brightness_mode_time_dark": "(Ignoreres hvis »brightness_mode='default'«) Varigheden i sekunder for tilpasningen af lysstyrken ved solopgang eller -nedgang. 📈📉",
+              "brightness_mode_time_light": "(Ignoreres hvis »brightness_mode='default'«) Varigheden i sekunder for tilpasningen af lysstyrken ved solopgang eller -nedgang. 📈📉",
+              "autoreset_control_seconds": "Nulstil automatisk den manuelle styring efter et antal sekunder. Indstil til 0 for at deaktivere. ⏲️",
+              "send_split_delay": "Forsinkelse (ms) mellem »separate_turn_on_commands« for lyskilder som ikke understøtter simultane styrke- og farveindstillinger. ⏲️",
+              "adapt_delay": "Ventetid (sekunder) mellem lyset tændes og Adaptive Lighting anvender ændringer. Kan hjælpe med at undgå flimren. ⏲️"
+            }
+          }
         }
       }
     },
@@ -46,5 +89,112 @@
       "option_error": "Ugyldig indstilling",
       "entity_missing": "Et udvalgt lys blev ikke fundet "
     }
+  },
+  "services": {
+    "apply": {
+      "description": "Anvender de aktuelle Adaptive Lighting indstillinger på lys.",
+      "fields": {
+        "prefer_rgb_color": {
+          "description": "Om man vil foretrække RGB-farvejustering frem for lysfarvetemperatur, når det er muligt. 🌈"
+        },
+        "transition": {
+          "description": "Varighed af overgang, når lys ændres, i sekunder. 🕑"
+        },
+        "turn_on_lights": {
+          "description": "Om lys der i øjeblikket er slukket, skal tændes. 🔆"
+        },
+        "adapt_brightness": {
+          "description": "Om lysstyrken skal tilpasses. 🌞"
+        },
+        "lights": {
+          "description": "Et lys (eller liste over lys) som indstillingerne skal anvendes til. 💡"
+        },
+        "adapt_color": {
+          "description": "Om farven på støttelys skal tilpasses. 🌈"
+        }
+      }
+    },
+    "change_switch_settings": {
+      "fields": {
+        "entity_id": {
+          "description": "Entity ID af kontakten. 📝"
+        },
+        "turn_on_lights": {
+          "description": "Om lys der i øjeblikket er slukket, skal tændes. 🔆"
+        },
+        "sleep_transition": {
+          "description": "Varigheden af overgangen, når \"sovetilstand\" skiftes, i sekunder. 😴"
+        },
+        "only_once": {
+          "description": "Tilpas kun lys, når de er tændt ('sand'), eller fortsæt med at tilpasse dem ('falsk'). 🔄"
+        },
+        "prefer_rgb_color": {
+          "description": "Om man vil foretrække RGB-farvejustering frem for lysfarvetemperatur, når det er muligt. 🌈"
+        },
+        "sleep_brightness": {
+          "description": "Lysstyrkeprocent af lys i søvntilstand. 😴"
+        },
+        "sunrise_time": {
+          "description": "Sæt en fast tid (HH:MM:SS) til solopgang. 🌅"
+        },
+        "sunrise_offset": {
+          "description": "Juster solopgangstiden med et positivt eller negativt offset, i sekunder. ⏰"
+        },
+        "sunset_offset": {
+          "description": "Juster solnedgang tid med et positivt eller negativt offset, i sekunder. ⏰"
+        },
+        "sunset_time": {
+          "description": "Sæt en fast tid (HH:MM:SS) for solnedgang. 🌇"
+        },
+        "max_sunrise_time": {
+          "description": "Indstil den seneste virtuelle solopgangstid (HH:MM:SS), hvilket giver mulighed for tidligere solopgange. 🌅"
+        },
+        "min_sunset_time": {
+          "description": "Indstil den tidligste virtuelle solnedgangstid (HH:MM:SS), hvilket giver mulighed for senere solnedgange. 🌇"
+        },
+        "transition": {
+          "description": "Varighed af overgang, når lys ændres, i sekunder. 🕑"
+        },
+        "autoreset_control_seconds": {
+          "description": "Nulstil automatisk den manuelle styring efter et antal sekunder. Indstil til 0 for at deaktivere. ⏲️"
+        },
+        "adapt_delay": {
+          "description": "Ventetid (sekunder) mellem lyset tændes og Adaptive Lighting anvender ændringer. Kan hjælpe med at undgå flimren. ⏲️"
+        },
+        "max_brightness": {
+          "description": "Maksimal lysstyrkeprocent. 💡"
+        },
+        "max_color_temp": {
+          "description": "Koldeste farvetemperatur i Kelvin. ❄️"
+        },
+        "min_brightness": {
+          "description": "Mindste lysstyrkeprocent. 💡"
+        },
+        "min_color_temp": {
+          "description": "Varmste farvetemperatur i Kelvin. 🔥"
+        },
+        "sleep_color_temp": {
+          "description": "Farvetemperatur i søvntilstand (bruges når `sleep_rgb_or_color_temp` er `color_temp`) i Kelvin. 😴"
+        },
+        "send_split_delay": {
+          "description": "Forsinkelse (ms) mellem »separate_turn_on_commands« for lyskilder som ikke understøtter simultane styrke- og farveindstillinger. ⏲️"
+        },
+        "detect_non_ha_changes": {
+          "description": "Opdager og stopper tilpasningen ved tilstandsændringer, som ikke er udløst af »light.turn_on«. Indstillingen »take_over_control« skal være aktiveret. 🕵️ Advarsel: ⚠️ Nogle lyskilder kan rapportere en falsk tændt-tilstand, hvilket kan medføre af lyskilden tændes når det ikke er meningen. Slå denne funktion fra, hvis du oplever dette problem."
+        },
+        "initial_transition": {
+          "description": "Den første overgangs varighed når lysene ændres fra »off« til »on« i sekunder. ⏲️"
+        }
+      },
+      "description": "Skift de indstillinger du ønsker i kontakten. Alle muligheder her er de samme som i konfigurationsflowet."
+    },
+    "set_manual_control": {
+      "description": "Markér om et lys er 'manuelt kontrolleret'.",
+      "fields": {
+        "lights": {
+          "description": "entity_id(er) af lys, hvis ikke specificeret, vil alle lys i kontakten være valgt. 💡"
+        }
+      }
+    }
   }
 }

custom_components/adaptive_lighting/translations/de.json

@@ -1,58 +1,238 @@
 {
-  "title": "Adaptive Lighting",
+  "title": "Adaptive Beleuchtung",
   "config": {
     "step": {
       "user": {
-        "title": "Benenne das Adaptive Lighting",
+        "title": "Benenne die Adaptive Beleuchtung Instanz",
         "description": "Jede Instanz kann mehrere Licht Entitäten beinhalten",
         "data": {
           "name": "Name"
         }
+      },
+      "menu": {
+        "title": "Erstellen oder Duplizieren",
+        "description": "Möchtest du eine neue Instanz erstellen oder eine existierende duplizieren?",
+        "data": {
+          "action": "Aktion"
+        }
       }
     },
     "abort": {
-      "already_configured": "Gerät ist bereits konfiguriert!"
+      "already_configured": "Dieses Gerät ist bereits konfiguriert."
     }
   },
   "options": {
     "step": {
       "init": {
-        "title": "Adaptive Lighting Optionen",
-        "description": "Alle Einstellungen für eine Adaptive Lighting Komponente. Die Optionsnamen entsprechen den YAML-Einstellungen. Es werden keine Optionen angezeigt, wenn dieser Eintrag in YAML konfiguriert wurde.",
+        "title": "Optionen für Adaptive Beleuchtung",
+        "description": "Alle Einstellungen für eine Adaptive Lighting Komponente. Die Optionsnamen entsprechen den YAML-Einstellungen. Es werden keine Optionen angezeigt, wenn dieser Eintrag in YAML konfiguriert wurde. Interaktive Diagramme zur Veranschaulichung der Auswirkungen der Parameter finden Sie unter [dieser Webanwendung]({webapp_url}). Weitere Details finden Sie in der [offiziellen Dokumentation]({docs_url}).",
         "data": {
           "lights": "Lichter",
-          "initial_transition": "initial_transition, wenn Lichter von 'off' zu 'on' wechseln oder wenn 'sleep_state' wechselt",
-	  "sleep_transition": "sleep_transition: Wenn 'sleep_state' sich ändert. (Sekunden)",
           "interval": "interval, Zeit zwischen Updates des Switches",
-          "max_brightness": "max_brightness, maximale Helligkeit in %",
-          "max_color_temp": "max_color_temp, maximale Farbtemperatur in Kelvin",
-          "min_brightness": "min_brightness, minimale Helligkeit in %",
-          "min_color_temp": "min_color_temp, minimale Farbtemperatur in Kelvin",
-          "only_once": "only_once, passe die Lichter nur beim Einschalten an",
-          "prefer_rgb_color": "prefer_rgb_color, nutze 'rgb_color' vor 'color_temp', wenn möglich",
-          "separate_turn_on_commands": "separate_turn_on_commands, für jedes Attribut (Farbe, Helligkeit usw.) in 'light.turn_on' werden separate Befehle gesendet. Wird für manche Leuchtmittel benötigt.",
-          "send_split_delay": "send_split_delay: Wartezeit zwischen dem Senden der Befehle (Millisekunden), wenn separate_turn_on_commands genutzt wird. Kann helfen, wenn die Leuchtmittel die separaten Befehle nicht korrekt umsetzen.",
-          "sleep_brightness": "sleep_brightness, Schlafhelligkeit in %",
-	  "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp, nutze 'rgb_color' oder 'color_temp'",
-	  "sleep_rgb_color": "sleep_rgb_color, in RGB",
-          "sleep_color_temp": "sleep_color_temp, Schlaffarbtemperatur in Kelvin",
-          "sunrise_offset": "sunrise_offset, Sonnenaufgang Verschiebung in +/- Sekunden",
-          "sunrise_time": "sunrise_time, Sonnenaufgangszeit in 'HH:MM:SS' Format (wenn 'None' wird die aktuelle Zeit des Sonnenaufgangs an deiner Position verwendet)",
-	  "max_sunrise_time": "max_sunrise_time: Manuelles Überschreiben der max. sunrise_time. Falls 'None', wird die tatsächliche sunrise_time an deiner Position verwendet (HH:MM:SS)",
-          "sunset_offset": "sunset_offset, Sonnenuntergang Verschiebung in +/- Sekunden",
-          "sunset_time": "sunset_time, Sonnenuntergangszeit in 'HH:MM:SS' Format (wenn 'None' wird die aktuelle Zeit des Sonnenuntergangs an deiner Position verwendet)",
-          "min_sunset_time": "min_sunset_time: Manuelles Überschreiben der min. sunset_time. Falls 'None', wird die tatsächliche sunset_time an deiner Position verwendet (HH:MM:SS)",
-	  "take_over_control": "take_over_control, wenn irgendetwas während ein Licht an ist außer Adaptive Lighting den Service 'light.turn_on' aufruft, stoppe die Anpassung des Lichtes (oder des Schalters) bis dieser wieder von off -> on geschaltet wird.",
-          "detect_non_ha_changes": "detect_non_ha_changes, entdeckt alle Änderungen über 10% am Licht (auch außerhalb von HA gemacht), 'take_over_control' muss aktiviert sein (ruft 'homeassistant.update_entity' jede 'interval' auf!)",
           "transition": "transition, Wechselzeit in Sekunden",
-          "adapt_delay": "adapt_delay: Wartezeit (in Sekunden) zwischen Anschalten des Licht und der Anpassung durch Adaptive Lights. Kann Flackern vermeiden.",
-          "skip_redundant_commands": "Keine Adaptierungsbefehle senden, deren erwünschter Status schon dem bekanntes Status von Lichtern entspricht. Minimiert die Netzwerkbelastung und verbessert die Adaptierung in manchen Situationen. Deaktiviert lassen falls der pysikalische Status der Lichter und der erkannte Status in HA nicht synchron bleiben."
+          "min_brightness": "min_brightness: Minimale Helligkeit in Prozent. 💡",
+          "max_brightness": "max_brightness: Maximale Helligkeit in Prozent. 💡",
+          "min_color_temp": "min_color_temp: Wärmste Farbtemperatur in Kelvin. 🔥",
+          "max_color_temp": "max_color_temp: Kälteste Farbtemperatur in Kelvin. ❄️",
+          "sleep_brightness": "sleep_brightness, Schlafhelligkeit in %",
+          "sleep_color_temp": "sleep_color_temp, Schlaffarbtemperatur in Kelvin"
+        },
+        "data_description": {
+          "interval": "Häufigkeit der Lichtanpassung in Sekunden. 🔄",
+          "transition": "Dauer des Übergangs beim Lichtwechsel in Sekunden. 🕑",
+          "sleep_brightness": "Helligkeit der Lichter im Schlafmodus in Prozent. 😴",
+          "sleep_color_temp": "Farbtemperatur im Schlafmodus in Kelvin (wird verwendet, wenn `sleep_rgb_or_color_temp` `color_temp` ist) . 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition, wenn Lichter von 'off' zu 'on' wechseln oder wenn 'sleep_state' wechselt",
+              "prefer_rgb_color": "prefer_rgb_color: Ob die RGB-Farbanpassung der Farbtemperaturanpassung vorgezogen werden soll, wenn möglich. 🌈",
+              "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp, nutze 'rgb_color' oder 'color_temp'",
+              "sleep_rgb_color": "sleep_rgb_color, in RGB",
+              "sleep_transition": "sleep_transition: Wenn 'sleep_state' sich ändert. (Sekunden)",
+              "transition_until_sleep": "transition_until_sleep: Wenn diese Option aktiviert ist, behandelt die adaptive Beleuchtung die Schlafeinstellungen als Minimum und geht nach Sonnenuntergang zu diesen Werten über. 🌙",
+              "sunrise_time": "sunrise_time, Sonnenaufgangszeit in 'HH:MM:SS' Format (wenn 'None' wird die aktuelle Zeit des Sonnenaufgangs an deiner Position verwendet)",
+              "max_sunrise_time": "max_sunrise_time: Manuelles Überschreiben der max. sunrise_time. Falls 'None', wird die tatsächliche sunrise_time an deiner Position verwendet (HH:MM:SS)",
+              "sunrise_offset": "sunrise_offset, Sonnenaufgang Verschiebung in +/- Sekunden",
+              "sunset_time": "sunset_time, Sonnenuntergangszeit in 'HH:MM:SS' Format (wenn 'None' wird die aktuelle Zeit des Sonnenuntergangs an deiner Position verwendet)",
+              "min_sunset_time": "min_sunset_time: Manuelles Überschreiben der min. sunset_time. Falls 'None', wird die tatsächliche sunset_time an deiner Position verwendet (HH:MM:SS)",
+              "sunset_offset": "sunset_offset, Sonnenuntergang Verschiebung in +/- Sekunden",
+              "take_over_control": "take_over_control: Deaktiviere die adaptive Beleuchtung, wenn eine andere Quelle `light.turn_on` aufruft, während die Beleuchtung eingeschaltet ist und angepasst wird. Beachte, dass dies `homeassistant.update_entity` jedes `Intervall` aufruft! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: Erkennt und stoppt Anpassungen für nicht-`light.turn_on`-Zustandsänderungen. Benötigt, dass `take_over_control` aktiviert ist. 🕵️ Vorsicht: ⚠️ Einige Lichter können fälschlicherweise einen 'an'-Zustand anzeigen, was dazu führen kann, dass Lichter unerwartet eingeschaltet werden. Deaktiviere diese Funktion, wenn solche Probleme auftreten.",
+              "only_once": "only_once: Lichter nur einmalig anpassen, wenn sie eingeschaltet werden (`true`) oder sie immer wieder anpassen (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Beim ersten Einschalten des Lichts. Wenn auf `true` gesetzt, passt AL das Licht nur an, wenn `light.turn_on` ohne eine Angabe von Farbe oder Helligkeit aufgerufen wird. ❌🌈 Dies verhindert z.B. die Anpassung durch AL beim Aktivieren einer Szene. Wenn auf \"false\" gesetzt, passt AL das licht unabhängig von der Angabe von Farbe oder Helligkeit in den ursprünglichen `service_data` an. Benötigt das `take_over_control` aktiviert ist. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Verwende getrennte `light.turn_on`-Aufrufe für Farbe und Helligkeit, erforderlich für einige Lichttypen. 🔀",
+              "send_split_delay": "send_split_delay: Wartezeit zwischen dem Senden der Befehle (Millisekunden), wenn separate_turn_on_commands genutzt wird. Kann helfen, wenn die Leuchtmittel die separaten Befehle nicht korrekt umsetzen.",
+              "adapt_delay": "adapt_delay: Wartezeit (in Sekunden) zwischen Anschalten des Licht und der Anpassung durch Adaptive Lights. Kann Flackern vermeiden.",
+              "skip_redundant_commands": "skip_redundant_commands: Überspringt das Senden von Anpassungsbefehlen, deren Zielzustand bereits mit dem bekannten Zustand der Leuchte übereinstimmt. Minimiert den Netzwerkverkehr und verbessert die Anpassungsreaktion in einigen Situationen. 📉 Deaktivieren, falls der physikalische Zustand der Lichter nicht mehr mit dem Zustand in HA übereinstimmt.",
+              "intercept": "intercept: Abfangen und Anpassen von `light.turn_on`-Aufrufen, um eine sofortige Anpassung von Farbe und Helligkeit zu ermöglichen. 🏎️ Deaktivieren für Leuchten, die `light.turn_on` mit Farbe und Helligkeit nicht unterstützen.",
+              "multi_light_intercept": "multi_light_intercept: Abfangen und Anpassen von `light.turn_on`-Aufrufen, die auf mehrere Lichter aufrufen. ➗⚠️ Dies kann dazu führen, dass ein einzelner `light.turn_on`-Aufruf in mehrere Aufrufe aufgeteilt wird, z.B. wenn Lichter in verschiedenen Schaltern sind. Erfordert, dass `intercept` aktiviert ist.",
+              "include_config_in_attributes": "include_config_in_attributes: Alle Optionen als Attribute auf dem Schalter im Home Assistant anzeigen, wenn auf `true` gesetzt. 📝",
+              "expand_light_groups": "expand_light_groups: Lichtgruppen auf einzelne Mitgliedsentitäten erweitern (`true`) oder die Gruppenentität direkt steuern (`false`)."
+            },
+            "data_description": {
+              "initial_transition": "Dauer des ersten Übergangs, wenn das Licht von `off` auf `on` schaltet, in Sekunden. ⏲️",
+              "sleep_rgb_or_color_temp": "Verwende entweder `rgb_color` oder `color_temp` im Schlafmodus. 🌙",
+              "sleep_rgb_color": "RGB-Farbe im Schlafmodus (wird verwendet, wenn `sleep_rgb_or_color_temp` `rgb_color` ist). 🌈",
+              "sleep_transition": "Dauer des Übergangs, wenn der \"Schlafmodus\" umgeschaltet wird, in Sekunden. 😴",
+              "sunrise_time": "Stelle eine feste Zeit (HH:MM:SS) für den Sonnenaufgang ein. 🌅",
+              "min_sunrise_time": "Lege die früheste virtuelle Sonnenaufgangszeit (HH:MM:SS) fest, um einen späteren Sonnenaufgang zu ermöglichen. 🌅",
+              "max_sunrise_time": "Lege die späteste virtuelle Sonnenaufgangszeit (HH:MM:SS) fest, um einen früheren Sonnenaufgang zu ermöglichen. 🌅",
+              "sunrise_offset": "Anpassung der Sonnenaufgangszeit mit positivem oder negativem Versatz in Sekunden. ⏰",
+              "sunset_time": "Stelle eine feste Zeit (HH:MM:SS) für den Sonnenuntergang ein. 🌇",
+              "min_sunset_time": "Lege die früheste virtuelle Sonnenuntergangszeit (HH:MM:SS) fest, um spätere Sonnenuntergänge zu ermöglichen. 🌇",
+              "max_sunset_time": "Lege die späteste virtuelle Sonnenuntergangszeit (HH:MM:SS) fest, um frühere Sonnenuntergänge zu ermöglichen. 🌇",
+              "sunset_offset": "Anpassung der Sonnenuntergangszeit mit positivem oder negativem Versatz in Sekunden. ⏰",
+              "brightness_mode": "Helligkeitsmodus, der verwendet werden soll. Mögliche Werte sind `default`, `linear` und `tanh` (verwendet `brightness_mode_time_dark` und `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(Wird ignoriert, wenn `brightness_mode='default'`) Die Dauer in Sekunden, um die Helligkeit vor/nach Sonnenaufgang/Sonnenuntergang hoch/runter zu fahren. 📈📉.",
+              "brightness_mode_time_light": "(Wird ignoriert, wenn `brightness_mode='default'`) Die Dauer in Sekunden, um die Helligkeit nach/vor Sonnenaufgang/Sonnenuntergang hoch/runter zu fahren. 📈📉.",
+              "autoreset_control_seconds": "Setzt die manuelle Steuerung nach einer bestimmten Anzahl von Sekunden automatisch zurück. Zum Deaktivieren auf 0 setzen. ⏲️",
+              "send_split_delay": "Verzögerung (ms) zwischen `separate_turn_on_commands` für Leuchten, die keine gleichzeitige Einstellung von Helligkeit und Farbe unterstützen. ⏲️",
+              "adapt_delay": "Wartezeit (Sekunden) zwischen dem Einschalten des Lichts und der Anwendung der adaptiven Beleuchtung. Könnte helfen, Flackern zu vermeiden. ⏲️",
+              "expand_light_groups": "Wenn auf `false` gesetzt, werden Anpassungsbefehle direkt an die Gruppenentität gesendet und nicht an die einzelnen Mitglieder."
+            }
+          }
         }
       }
     },
     "error": {
-      "option_error": "Fehlerhafte Option",
-      "entity_missing": "Ein ausgewähltes Licht wurde nicht gefunden"
+      "option_error": "Ungültige Option",
+      "entity_missing": "Ein oder mehrere ausgewählte Lichter fehlen in Home Assistant"
+    }
+  },
+  "services": {
+    "apply": {
+      "fields": {
+        "lights": {
+          "description": "Eine Leuchte (oder eine Liste von Leuchten), auf die die Einstellungen angewendet werden sollen. 💡"
+        },
+        "entity_id": {
+          "description": "Die `entity_id` des Schalters mit den zu übernehmenden Einstellungen. 📝"
+        },
+        "prefer_rgb_color": {
+          "description": "Ob die RGB-Farbanpassung der Farbtemperaturanpassung vorgezogen werden soll, wenn möglich. 🌈"
+        },
+        "transition": {
+          "description": "Dauer des Übergangs beim Lichtwechsel in Sekunden. 🕑"
+        },
+        "adapt_brightness": {
+          "description": "Ob die Helligkeit des Lichts angepasst werden soll. 🌞"
+        },
+        "adapt_color": {
+          "description": "Ob die Farbtemperatur des Lichts angepasst werden soll. 🌈"
+        },
+        "turn_on_lights": {
+          "description": "Ob Lichter eingeschaltet werden sollen, die derzeit ausgeschaltet sind. 🔆"
+        }
+      },
+      "description": "Wendet die aktuellen Einstellungen der adaptiven Beleuchtung auf die Lichter an."
+    },
+    "change_switch_settings": {
+      "fields": {
+        "only_once": {
+          "description": "Lichter nur einmalig anpassen, wenn sie eingeschaltet werden (`true`) oder sie immer wieder anpassen (`false`). 🔄"
+        },
+        "detect_non_ha_changes": {
+          "description": "Erkennt und stoppt Anpassungen für nicht-`light.turn_on`-Zustandsänderungen. Benötigt, dass `take_over_control` aktiviert ist. 🕵️ Vorsicht: ⚠️ Einige Lichter können fälschlicherweise einen 'an'-Zustand anzeigen, was dazu führen kann, dass Lichter unerwartet eingeschaltet werden. Deaktiviere diese Funktion, wenn solche Probleme auftreten."
+        },
+        "min_brightness": {
+          "description": "Minimale Helligkeit in Prozent. 💡"
+        },
+        "sunset_time": {
+          "description": "Stelle eine feste Zeit (HH:MM:SS) für den Sonnenuntergang ein. 🌇"
+        },
+        "use_defaults": {
+          "description": "Setzt die nicht in diesem Service-Aufruf angegebenen Standardwerte. Optionen: `current` (Standard, behält die aktuellen Werte bei), `factory` (setzt auf die in der Dokumentation angegebenen Standardwerte zurück) oder `configuration` (setzt auf die Standardwerte der Switch-Konfiguration zurück). ⚙️"
+        },
+        "max_sunrise_time": {
+          "description": "Lege die späteste virtuelle Sonnenaufgangszeit (HH:MM:SS) fest, um einen früheren Sonnenaufgang zu ermöglichen. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "Zeige alle Optionen als Attribute auf dem Schalter im Home Assistant, wenn auf `true` gesetzt. 📝"
+        },
+        "min_sunset_time": {
+          "description": "Lege die früheste virtuelle Sonnenuntergangszeit (HH:MM:SS) fest, um spätere Sonnenuntergänge zu ermöglichen. 🌇"
+        },
+        "sunrise_offset": {
+          "description": "Anpassung der Sonnenaufgangszeit mit positivem oder negativem Versatz in Sekunden. ⏰"
+        },
+        "sunset_offset": {
+          "description": "Anpassung der Sonnenuntergangszeit mit positivem oder negativem Versatz in Sekunden. ⏰"
+        },
+        "take_over_control": {
+          "description": "Deaktiviere die adaptive Beleuchtung, wenn eine andere Quelle `light.turn_on` aufruft, während die Beleuchtung eingeschaltet ist und angepasst wird. Beachte, dass dies `homeassistant.update_entity` jedes `Intervall` aufruft! 🔒"
+        },
+        "max_brightness": {
+          "description": "Maximale Helligkeit in Prozent. 💡"
+        },
+        "separate_turn_on_commands": {
+          "description": "Verwende getrennte `light.turn_on`-Aufrufe für Farbe und Helligkeit, erforderlich für einige Lichttypen. 🔀"
+        },
+        "sleep_brightness": {
+          "description": "Helligkeit der Lichter im Schlafmodus in Prozent. 😴"
+        },
+        "sleep_rgb_color": {
+          "description": "RGB-Farbe im Schlafmodus (wird verwendet, wenn `sleep_rgb_or_color_temp` `rgb_color` ist). 🌈"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Verwende entweder `rgb_color` oder `color_temp` im Schlafmodus. 🌙"
+        },
+        "sleep_color_temp": {
+          "description": "Farbtemperatur im Schlafmodus in Kelvin (wird verwendet, wenn `sleep_rgb_or_color_temp` `color_temp` ist) . 😴"
+        },
+        "sunrise_time": {
+          "description": "Stelle eine feste Zeit (HH:MM:SS) für den Sonnenaufgang ein. 🌅"
+        },
+        "transition": {
+          "description": "Dauer des Übergangs beim Lichtwechsel in Sekunden. 🕑"
+        },
+        "adapt_delay": {
+          "description": "Wartezeit (Sekunden) zwischen dem Einschalten des Lichts und der Anwendung der adaptiven Beleuchtung. Könnte helfen, Flackern zu vermeiden. ⏲️"
+        },
+        "autoreset_control_seconds": {
+          "description": "Setzt die manuelle Steuerung nach einer bestimmten Anzahl von Sekunden automatisch zurück. Zum Deaktivieren auf 0 setzen. ⏲️"
+        },
+        "entity_id": {
+          "description": "Entity ID des Schalters. 📝"
+        },
+        "turn_on_lights": {
+          "description": "Ob Lichter eingeschaltet werden sollen, die derzeit ausgeschaltet sind. 🔆"
+        },
+        "initial_transition": {
+          "description": "Dauer des ersten Übergangs, wenn das Licht von `off` auf `on` schaltet, in Sekunden. ⏲️"
+        },
+        "sleep_transition": {
+          "description": "Dauer des Übergangs, wenn der \"Schlafmodus\" umgeschaltet wird, in Sekunden. 😴"
+        },
+        "max_color_temp": {
+          "description": "Kälteste Farbtemperatur in Kelvin. ❄️"
+        },
+        "min_color_temp": {
+          "description": "Wärmste Farbtemperatur in Kelvin. 🔥"
+        },
+        "send_split_delay": {
+          "description": "Verzögerung (ms) zwischen `separate_turn_on_commands` für Leuchten, die keine gleichzeitige Einstellung von Helligkeit und Farbe unterstützen. ⏲️"
+        },
+        "prefer_rgb_color": {
+          "description": "Ob die RGB-Farbanpassung der Farbtemperaturanpassung vorgezogen werden soll, wenn möglich. 🌈"
+        }
+      },
+      "description": "Ändern Sie alle Einstellungen, die Sie im Schalter wünschen. Alle Optionen hier sind die gleichen wie im config Flow."
+    },
+    "set_manual_control": {
+      "fields": {
+        "manual_control": {
+          "description": "Ob das Licht aus der Liste `manual_control` hinzugefügt (`true`) oder entfernt (`false`) werden soll. 🔒"
+        },
+        "lights": {
+          "description": "entity_id(s) der Lichter, wenn nichts angegeben wird, werden alle Lichter des Schalters ausgewählt. 💡"
+        },
+        "entity_id": {
+          "description": "Die `entity_id` des Schalters, in dem das Licht als `manuell gesteuert` (un)markiert werden soll. 📝"
+        }
+      },
+      "description": "Markiere, ob ein Licht \"manuell gesteuert\" ist."
     }
   }
 }

custom_components/adaptive_lighting/translations/el.json

@@ -0,0 +1,27 @@
+{
+  "title": "Adaptive Lighting",
+  "options": {
+    "step": {
+      "init": {
+        "title": "Επιλογές Adaptive Lighting",
+        "sections": {
+          "advanced": {
+            "data": {},
+            "data_description": {}
+          }
+        },
+        "data": {},
+        "data_description": {}
+      }
+    }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "only_once": {
+          "description": "Προσαρμογή των φώτων μόνο όταν είναι αναμμένα (`true`) ή συνεχής προσαρμογή αυτών (`false`). 🔄"
+        }
+      }
+    }
+  }
+}

custom_components/adaptive_lighting/translations/en.json

@@ -8,6 +8,13 @@
         "data": {
           "name": "Name"
         }
+      },
+      "menu": {
+        "title": "Create or Duplicate",
+        "description": "Do you want to create a new instance or duplicate an existing one?",
+        "data": {
+          "action": "Action"
+        }
       }
     },
     "abort": {
@@ -18,70 +25,85 @@
     "step": {
       "init": {
         "title": "Adaptive Lighting options",
-        "description": "Configure an Adaptive Lighting component. Option names align with the YAML settings. If you've defined this entry in YAML, no options will appear here. For interactive graphs that demonstrate parameter effects, visit [this web app](https://basnijholt.github.io/adaptive-lighting). For further details, see the [official documentation](https://github.com/basnijholt/adaptive-lighting#readme).",
+        "description": "Configure an Adaptive Lighting component. Option names align with the YAML settings. If you've defined this entry in YAML, no options will appear here. For interactive graphs that demonstrate parameter effects, visit [this web app]({webapp_url}). For further details, see the [official documentation]({docs_url}).",
         "data": {
           "lights": "lights: List of light entity_ids to be controlled (may be empty). 🌟",
           "interval": "interval",
           "transition": "transition",
-          "initial_transition": "initial_transition",
           "min_brightness": "min_brightness: Minimum brightness percentage. 💡",
           "max_brightness": "max_brightness: Maximum brightness percentage. 💡",
           "min_color_temp": "min_color_temp: Warmest color temperature in Kelvin. 🔥",
           "max_color_temp": "max_color_temp: Coldest color temperature in Kelvin. ❄️",
-          "prefer_rgb_color": "prefer_rgb_color: Whether to prefer RGB color adjustment over light color temperature when possible. 🌈",
           "sleep_brightness": "sleep_brightness",
-          "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp",
-          "sleep_color_temp": "sleep_color_temp",
-          "sleep_rgb_color": "sleep_rgb_color",
-          "sleep_transition": "sleep_transition",
-          "transition_until_sleep": "transition_until_sleep: When enabled, Adaptive Lighting will treat sleep settings as the minimum, transitioning to these values after sunset. 🌙",
-          "sunrise_time": "sunrise_time",
-          "min_sunrise_time": "min_sunrise_time",
-          "max_sunrise_time": "max_sunrise_time",
-          "sunrise_offset": "sunrise_offset",
-          "sunset_time": "sunset_time",
-          "min_sunset_time": "min_sunset_time",
-          "max_sunset_time": "max_sunset_time",
-          "sunset_offset": "sunset_offset",
-          "brightness_mode": "brightness_mode",
-          "brightness_mode_time_dark": "brightness_mode_time_dark",
-          "brightness_mode_time_light": "brightness_mode_time_light",
-          "take_over_control": "take_over_control: Disable Adaptive Lighting if another source calls `light.turn_on` while lights are on and being adapted. Note that this calls `homeassistant.update_entity` every `interval`! 🔒",
-          "detect_non_ha_changes": "detect_non_ha_changes: Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Disable this feature if you encounter such issues.",
-          "autoreset_control_seconds": "autoreset_control_seconds",
-          "only_once": "only_once: Adapt lights only when they are turned on (`true`) or keep adapting them (`false`). 🔄",
-          "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: When turning lights on initially. If set to `true`, AL adapts only if `light.turn_on` is invoked without specifying color or brightness. ❌🌈 This e.g., prevents adaptation when activating a scene. If `false`, AL adapts regardless of the presence of color or brightness in the initial `service_data`. Needs `take_over_control` enabled. 🕵️ ",
-          "separate_turn_on_commands": "separate_turn_on_commands: Use separate `light.turn_on` calls for color and brightness, needed for some light types. 🔀",
-          "send_split_delay": "send_split_delay",
-          "adapt_delay": "adapt_delay",
-          "skip_redundant_commands": "skip_redundant_commands: Skip sending adaptation commands whose target state already equals the light's known state. Minimizes network traffic and improves the adaptation responsivity in some situations. 📉Disable if physical light states get out of sync with HA's recorded state.",
-          "intercept": "intercept: Intercept and adapt `light.turn_on` calls to enabling instantaneous color and brightness adaptation. 🏎️ Disable for lights that do not support `light.turn_on` with color and brightness.",
-          "multi_light_intercept": "multi_light_intercept: Intercept and adapt `light.turn_on` calls that target multiple lights. ➗⚠️ This might result in splitting up a single `light.turn_on` call into multiple calls, e.g., when lights are in different switches. Requires `intercept` to be enabled.",
-          "include_config_in_attributes": "include_config_in_attributes: Show all options as attributes on the switch in Home Assistant when set to `true`. 📝"
+          "sleep_color_temp": "sleep_color_temp"
         },
         "data_description": {
           "interval": "Frequency to adapt the lights, in seconds. 🔄",
           "transition": "Duration of transition when lights change, in seconds. 🕑",
-          "initial_transition": "Duration of the first transition when lights turn from `off` to `on` in seconds. ⏲️",
           "sleep_brightness": "Brightness percentage of lights in sleep mode. 😴",
-          "sleep_rgb_or_color_temp": "Use either `\"rgb_color\"` or `\"color_temp\"` in sleep mode. 🌙",
-          "sleep_color_temp": "Color temperature in sleep mode (used when `sleep_rgb_or_color_temp` is `color_temp`) in Kelvin. 😴",
-          "sleep_rgb_color": "RGB color in sleep mode (used when `sleep_rgb_or_color_temp` is \"rgb_color\"). 🌈",
-          "sleep_transition": "Duration of transition when \"sleep mode\" is toggled in seconds. 😴",
-          "sunrise_time": "Set a fixed time (HH:MM:SS) for sunrise. 🌅",
-          "min_sunrise_time": "Set the earliest virtual sunrise time (HH:MM:SS), allowing for later sunrises. 🌅",
-          "max_sunrise_time": "Set the latest virtual sunrise time (HH:MM:SS), allowing for earlier sunrises. 🌅",
-          "sunrise_offset": "Adjust sunrise time with a positive or negative offset in seconds. ⏰",
-          "sunset_time": "Set a fixed time (HH:MM:SS) for sunset. 🌇",
-          "min_sunset_time": "Set the earliest virtual sunset time (HH:MM:SS), allowing for later sunsets. 🌇",
-          "max_sunset_time": "Set the latest virtual sunset time (HH:MM:SS), allowing for earlier sunsets. 🌇",
-          "sunset_offset": "Adjust sunset time with a positive or negative offset in seconds. ⏰",
-          "brightness_mode": "Brightness mode to use. Possible values are `default`, `linear`, and `tanh` (uses `brightness_mode_time_dark` and `brightness_mode_time_light`). 📈",
-          "brightness_mode_time_dark": "(Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness before/after sunrise/sunset. 📈📉",
-          "brightness_mode_time_light": "(Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness after/before sunrise/sunset. 📈📉.",
-          "autoreset_control_seconds": "Automatically reset the manual control after a number of seconds. Set to 0 to disable. ⏲️",
-          "send_split_delay": "Delay (ms) between `separate_turn_on_commands` for lights that don't support simultaneous brightness and color setting. ⏲️",
-          "adapt_delay": "Wait time (seconds) between light turn on and Adaptive Lighting applying changes. Might help to avoid flickering. ⏲️"
+          "sleep_color_temp": "Color temperature in sleep mode (used when `sleep_rgb_or_color_temp` is `color_temp`) in Kelvin. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "name": "Advanced settings",
+            "description": "Additional settings for fine-tuning Adaptive Lighting.",
+            "data": {
+              "initial_transition": "initial_transition",
+              "prefer_rgb_color": "prefer_rgb_color: Whether to prefer RGB color adjustment over light color temperature when possible. 🌈",
+              "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp",
+              "sleep_rgb_color": "sleep_rgb_color",
+              "sleep_transition": "sleep_transition",
+              "transition_until_sleep": "transition_until_sleep: When enabled, Adaptive Lighting will treat sleep settings as the minimum, transitioning to these values after sunset. 🌙",
+              "sunrise_time": "sunrise_time",
+              "min_sunrise_time": "min_sunrise_time",
+              "max_sunrise_time": "max_sunrise_time",
+              "sunrise_offset": "sunrise_offset",
+              "sunset_time": "sunset_time",
+              "min_sunset_time": "min_sunset_time",
+              "max_sunset_time": "max_sunset_time",
+              "sunset_offset": "sunset_offset",
+              "brightness_mode": "brightness_mode",
+              "brightness_mode_time_dark": "brightness_mode_time_dark",
+              "brightness_mode_time_light": "brightness_mode_time_light",
+              "take_over_control": "take_over_control: Pause adaptation of individual lights and hand over (manual) control to other sources that issue `light.turn_on` calls for lights that are on. 🔒",
+              "take_over_control_mode": "take_over_control_mode",
+              "detect_non_ha_changes": "detect_non_ha_changes: Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Note that this calls `homeassistant.update_entity` every `interval`! Disable this feature if you encounter such issues.",
+              "autoreset_control_seconds": "autoreset_control_seconds",
+              "only_once": "only_once: Adapt lights only when they are turned on (`true`) or keep adapting them (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: When turning lights on initially. If set to `true`, AL adapts only if `light.turn_on` is invoked without specifying color or brightness. ❌🌈 This e.g., prevents adaptation when activating a scene and marks the light as manually controlled. If `false`, AL adapts regardless of the presence of color or brightness in the initial `service_data`. Needs `take_over_control` enabled. 🕵️",
+              "manual_control_on_external_turn_on": "manual_control_on_external_turn_on: Treat turn-ons without a matching Home Assistant `light.turn_on` context as manual control. Normal manual-control resets apply. Still allows `detect_non_ha_changes` for already-on lights. Needs `take_over_control` enabled. 🕵️",
+              "reset_manual_control_on_sleep_mode_change": "reset_manual_control_on_sleep_mode_change: Reset manual control when the sleep mode switch is toggled. Set to `false` to preserve manual control across sleep mode changes. 😴",
+              "separate_turn_on_commands": "separate_turn_on_commands: Use separate `light.turn_on` calls for color and brightness, needed for some light types. 🔀",
+              "send_split_delay": "send_split_delay",
+              "adapt_delay": "adapt_delay",
+              "skip_redundant_commands": "skip_redundant_commands: Skip sending adaptation commands whose target state already equals the light's known state. Minimizes network traffic and improves the adaptation responsivity in some situations. 📉Disable if physical light states get out of sync with HA's recorded state.",
+              "intercept": "intercept: Intercept and adapt `light.turn_on` calls to enabling instantaneous color and brightness adaptation. 🏎️ Disable for lights that do not support `light.turn_on` with color and brightness.",
+              "multi_light_intercept": "multi_light_intercept: Intercept and adapt `light.turn_on` calls that target multiple lights. ➗⚠️ This might result in splitting up a single `light.turn_on` call into multiple calls, e.g., when lights are in different switches. Requires `intercept` to be enabled.",
+              "include_config_in_attributes": "include_config_in_attributes: Show all options as attributes on the switch in Home Assistant when set to `true`. 📝",
+              "expand_light_groups": "expand_light_groups: Expand light groups to their members (`true`, default). Set `false` to send commands to the group and track manual control for the group. Explicit member targets in services stay individual targets."
+            },
+            "data_description": {
+              "initial_transition": "Duration of the first transition when lights turn from `off` to `on` in seconds. ⏲️",
+              "sleep_rgb_or_color_temp": "Use either `\"rgb_color\"` or `\"color_temp\"` in sleep mode. 🌙",
+              "sleep_rgb_color": "RGB color in sleep mode (used when `sleep_rgb_or_color_temp` is \"rgb_color\"). 🌈",
+              "sleep_transition": "Duration of transition when \"sleep mode\" is toggled in seconds. 😴",
+              "sunrise_time": "Set a fixed time (HH:MM:SS) for sunrise. 🌅",
+              "min_sunrise_time": "Set the earliest virtual sunrise time (HH:MM:SS), allowing for later sunrises. 🌅",
+              "max_sunrise_time": "Set the latest virtual sunrise time (HH:MM:SS), allowing for earlier sunrises. 🌅",
+              "sunrise_offset": "Adjust sunrise time with a positive or negative offset in seconds. ⏰",
+              "sunset_time": "Set a fixed time (HH:MM:SS) for sunset. 🌇",
+              "min_sunset_time": "Set the earliest virtual sunset time (HH:MM:SS), allowing for later sunsets. 🌇",
+              "max_sunset_time": "Set the latest virtual sunset time (HH:MM:SS), allowing for earlier sunsets. 🌇",
+              "sunset_offset": "Adjust sunset time with a positive or negative offset in seconds. ⏰",
+              "brightness_mode": "Brightness mode to use. Possible values are `default`, `linear`, and `tanh` (uses `brightness_mode_time_dark` and `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness before/after sunrise/sunset. 📈📉",
+              "brightness_mode_time_light": "(Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness after/before sunrise/sunset. 📈📉.",
+              "take_over_control_mode": "The adaptation pausing mode when other sources change brightness and/or color of lights. `pause_all` always pauses both brightness and color adaptation. `pause_changed` pauses the adaptation of only the changed attributes and continues adapting unchanged attributes, e.g., continues color adaptation when only brightness was changed.",
+              "autoreset_control_seconds": "Automatically reset the manual control after a number of seconds. Set to 0 to disable. ⏲️",
+              "send_split_delay": "Delay (ms) between `separate_turn_on_commands` for lights that don't support simultaneous brightness and color setting. ⏲️",
+              "adapt_delay": "Wait time (seconds) between light turn on and Adaptive Lighting applying changes. Might help to avoid flickering. ⏲️"
+            }
+          }
         }
       }
     },
@@ -138,7 +160,7 @@
           "name": "lights"
         },
         "manual_control": {
-          "description": "Whether to add (\"true\") or remove (\"false\") the light from the \"manual_control\" list. 🔒",
+          "description": "Whether to add (\"true\") or remove (\"false\") all adapted attributes of the light from the \"manual_control\" list, or the name of an attribute for selective addition. 🔒",
           "name": "manual_control"
         }
       }
@@ -147,10 +169,6 @@
       "name": "change_switch_settings",
       "description": "Change any settings you'd like in the switch. All options here are the same as in the config flow.",
       "fields": {
-        "entity_id": {
-          "description": "Entity ID of the switch. 📝",
-          "name": "entity_id"
-        },
         "use_defaults": {
           "description": "Sets the default values not specified in this service call. Options: \"current\" (default, retains current values), \"factory\" (resets to documented defaults), or \"configuration\" (reverts to switch config defaults). ⚙️",
           "name": "use_defaults"
@@ -195,6 +213,10 @@
           "description": "Whether to prefer RGB color adjustment over light color temperature when possible. 🌈",
           "name": "prefer_rgb_color"
         },
+        "expand_light_groups": {
+          "description": "Expand light groups to their members (`true`, default). Set `false` to send commands to the group and track manual control for the group. Explicit member targets in services stay individual targets.",
+          "name": "expand_light_groups"
+        },
         "separate_turn_on_commands": {
           "description": "Use separate `light.turn_on` calls for color and brightness, needed for some light types. 🔀",
           "name": "separate_turn_on_commands"
@@ -244,13 +266,21 @@
           "name": "min_sunset_time"
         },
         "take_over_control": {
-          "description": "Disable Adaptive Lighting if another source calls `light.turn_on` while lights are on and being adapted. Note that this calls `homeassistant.update_entity` every `interval`! 🔒",
+          "description": "Pause adaptation of individual lights and hand over (manual) control to other sources that issue `light.turn_on` calls for lights that are on. 🔒",
           "name": "take_over_control"
         },
+        "take_over_control_mode": {
+          "description": "The adaptation pausing mode when other sources change brightness and/or color of lights. `pause_all` always pauses both brightness and color adaptation. `pause_changed` pauses the adaptation of only the changed attributes and continues adapting unchanged attributes, e.g., continues color adaptation when only brightness was changed.",
+          "name": "take_over_control_mode"
+        },
         "detect_non_ha_changes": {
-          "description": "Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Disable this feature if you encounter such issues.",
+          "description": "Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Note that this calls `homeassistant.update_entity` every `interval`! Disable this feature if you encounter such issues.",
           "name": "detect_non_ha_changes"
         },
+        "manual_control_on_external_turn_on": {
+          "description": "Treat turn-ons without a matching Home Assistant `light.turn_on` context as manual control. Normal manual-control resets apply. Still allows `detect_non_ha_changes` for already-on lights. Needs `take_over_control` enabled. 🕵️",
+          "name": "manual_control_on_external_turn_on"
+        },
         "transition": {
           "description": "Duration of transition when lights change, in seconds. 🕑",
           "name": "transition"

custom_components/adaptive_lighting/translations/es.json

@@ -0,0 +1,218 @@
+{
+  "title": "Iluminación Adaptativa",
+  "options": {
+    "step": {
+      "init": {
+        "title": "Configuración de la Iluminación Adaptativa",
+        "data_description": {
+          "interval": "Frecuencia de adaptación de las luces, en segundos. 🔄",
+          "transition": "Duración de la transición cuando las luces se adaptan, en segundos. ⏲️",
+          "sleep_brightness": "Porcentaje de brillo de las luces en el modo noche. 😴",
+          "sleep_color_temp": "Temperatura de color en modo noche (usado cuando`sleep_rgb_or_color_temp` es `color_temp`) en grados Kelvin. 😴"
+        },
+        "data": {
+          "lights": "lights: Lista de entity_ids de luces a controlar (puede estar vacía). 🌟",
+          "min_brightness": "min_brightness: Porcentaje mínimo de brillo. 💡",
+          "max_brightness": "max_brightness: Porcentaje máximo de brillo. 💡",
+          "min_color_temp": "min_color_temp: Temperatura de color más cálida en grados Kelvin. 🔥",
+          "max_color_temp": "max_color_temp: Temperatura de color más fría en grados Kelvin. ❄️"
+        },
+        "description": "Configura un componente Adaptive Lighting. Los nombres de las opciones se asemejan a las disponibles en la configuración YAML. Si has definido esta entrada en YAML, no aparecerá ninguna opción aquí. Para gráficos interactivos que demuestran los efectos de los parámetros, visita [esta web app]({webapp_url}). Para más detalles, ver la [documentación oficial]({docs_url}).",
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "prefer_rgb_color: Preferir ajustar el color RGB a la temperatura de color cuando sea posible. 🌈",
+              "transition_until_sleep": "transition_until_sleep: Cuando habilitado, Adaptive Lighting tratará los ajustes del modo noche como los valores mínimos, transicionando a esos valores tras la puesta del sol. 🌙",
+              "take_over_control": "take_over_control: Deshabilita Adaptive Lighting si otra fuente llama`light.turn_on` mientras las luces están encendidas y adaptándose. Cuidado, esto llama`homeassistant.update_entity` cada `interval`! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: Detecta e interrumpe adaptaciones para cambios de estado no `light.turn_on`. Necesita `take_over_control` habilitado. 🕵️ Precaución: ⚠️ Algunas luces pueden indicar de forma errónea un estado 'on', que puede resultar en luces que se enciendan de forma no esperada. Deshabilita esta función si encuentras dichos problemas.",
+              "only_once": "only_once: Adapta las luces sólo cuando se encienden (`true`) o mantener adaptadas (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Al encender las luces. Si el valor es `true`, AL adapta sólo si se llama `light.turn_on` sin especificar el color o brillo. ❌🌈 Esto, por ejemplo, previene la adaptación al activar una escena. Si el valor es `false`, AL adapta independientemente de la presencia de color o brillo en `service_data` inicial. Necesita `take_over_control` habilitado. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Usar llamadas independientes a `light.turn_on` para color y brillo, necesario para ciertos tipos de luces. 🔀",
+              "skip_redundant_commands": "skip_redundant_commands: Evitar mandar comandos de adaptación a luces cuyo estado ya sea el esperado. Reduce tráfico en la red y mejora la respuesta de la adaptación en ciertas situaciones. 📉Deshabilitar si el estado real de las luces se desincroniza con el estado registrado en Home Assistant.",
+              "intercept": "intercept: Intercepta y adapta llamadas a `light.turn_on` para habilitar adaptaciones instantáneas de color y brillo. 🏎️ Deshabilitar para luces que no soporten `light.turn_on` con color y brillo.",
+              "multi_light_intercept": "multi_light_intercept: Intercepta y adapta llamadas a `light.turn_on` que apuntan a múltiples luces. ➗⚠️ Esto puede resultar en dividir una única llamada a `light.turn_on` en múltiples llamadas, por ejemplo, cuando las luces están vinculadas a distintos interruptores. Requiere que `intercept` esté habilitado.",
+              "include_config_in_attributes": "include_config_in_attributes: Muestra todas las opciones como atributes del interruptor en Home Assistant cuando sea `true`. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Duración de la primera transición cuando las luces pasan de `off` a `on` en segundos. ⏲️",
+              "sleep_rgb_or_color_temp": "Usar el modo`\"rgb_color\"` o `\"color_temp\"` en el modo noche. 🌙",
+              "sleep_rgb_color": "Color RGB en modo noche(usado cuando `sleep_rgb_or_color_temp` es \"rgb_color\"). 🌈",
+              "sleep_transition": "Duración de la transición cuando el \"modo noche\" se activa o desactiva, en segundos. 😴",
+              "sunrise_time": "Fijar una hora (HH:MM:SS) para el amanecer. 🌅",
+              "min_sunrise_time": "Define el amanecer virtual más temprano (HH:MM:SS), permitiendo amaneceres más tardíos. 🌅",
+              "max_sunrise_time": "Define el amanecer virtual más tardío (HH:MM:SS), permitiendo amaneceres más tempranos. 🌅",
+              "sunrise_offset": "Define la hora de la salida del sol con un desfase (positivo o negativo) en segundos. ⏰",
+              "sunset_time": "Fijar una hora (HH:MM:SS) para el atardecer. 🌇",
+              "min_sunset_time": "Define el atardecer virtual más temprano (HH:MM:SS), permitiendo atardeceres más tardíos. 🌇",
+              "max_sunset_time": "Define el atardecer virtual más tardío (HH:MM:SS), permitiendo atardeceres más tempranos. 🌇",
+              "sunset_offset": "Define la hora de la puesta del sol con un desfase (positivo o negativo) en segundos. ⏰",
+              "brightness_mode": "Modo de brillo a usar. Valores posibles son: `default`, `linear` y `tanh` (usa`brightness_mode_time_dark` y `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(Ignorado si `brightness_mode='default'`) La duración, en segundos, de la transición del brillo después/antes del amanecer/atardecer. 📈📉.",
+              "brightness_mode_time_light": "(Ignorado si `brightness_mode='default'`) La duración, en segundos, de la transición del brillo después/antes del amanecer/atardecer. 📈📉.",
+              "take_over_control_mode": "El modo de pausa de adaptación cuando otras fuentes cambian el brillo y/o el color de las luces. `pause_all` siempre pausa tanto la adaptación de brillo como la de color. `pause_changed` pausa la adaptación solo de los atributos cambiados y continúa adaptando los atributos sin cambios, por ejemplo, continúa la adaptación de color cuando solo se cambió el brillo.",
+              "autoreset_control_seconds": "Resetear automáticamente el control manual tras `X` segundos. Poner a 0 para deshabilitar.",
+              "send_split_delay": "Retraso (ms) entre `separate_turn_on_commands` para luces que no soportan ajustes simultáneos de brillo y color. ⏲️",
+              "adapt_delay": "Tiempo de espera (segundos) entre el encendido de la luz y Adaptive Lighting aplicando cambios. Puede ayudar a evitar parpadeos. ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "Opción no válida",
+      "entity_missing": "Una o más entidades de luz seleccionadas no se encuentran en Home Assistant"
+    }
+  },
+  "services": {
+    "apply": {
+      "fields": {
+        "lights": {
+          "description": "Luz (o listado de luces) sobre las que aplicar la configuración. 💡"
+        },
+        "transition": {
+          "description": "Duración de la transición cuando las luces se adaptan, en segundos. ⏲️"
+        },
+        "adapt_color": {
+          "description": "Adaptar (o no) el color en luces que lo soporten. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Preferir ajustes de color RGB a temperatura de color cuando sea posible. 🌈"
+        },
+        "turn_on_lights": {
+          "description": "Encender (o no) luces que estén apagadas. 🔆"
+        },
+        "entity_id": {
+          "description": "El `entity_id` del interruptor con los ajustes a aplicar. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Adaptar (o no) el brillo de la luz. 🌞"
+        }
+      },
+      "description": "Aplica la configuración actual de Adaptive Lighting a las luces."
+    },
+    "change_switch_settings": {
+      "fields": {
+        "sunrise_offset": {
+          "description": "Define la hora de la salida del sol con un desfase (positivo o negativo) en segundos. ⏰"
+        },
+        "sunset_offset": {
+          "description": "Define la hora de la puesta del sol con un desfase (positivo o negativo) en segundos. ⏰"
+        },
+        "only_once": {
+          "description": "Adaptar las luces solo cuando se enciendan (`true`) o hacerlo siempre (`false`). 🔄"
+        },
+        "sleep_color_temp": {
+          "description": "Temperatura de color en modo noche (usado cuando`sleep_rgb_or_color_temp` es `color_temp`) en grados Kelvin. 😴"
+        },
+        "max_color_temp": {
+          "description": "Temperatura de color más fría en grados Kelvin. ❄️"
+        },
+        "send_split_delay": {
+          "description": "Retraso (ms) entre `separate_turn_on_commands` para luces que no soportan ajustes simultáneos de brillo y color. ⏲️"
+        },
+        "detect_non_ha_changes": {
+          "description": "detect_non_ha_changes: Detecta e interrumpe adaptaciones para cambios de estado no `light.turn_on`. Necesita `take_over_control` habilitado. 🕵️ Precaución: ⚠️ Algunas luces pueden indicar de forma errónea un estado 'on', que puede resultar en luces que se enciendan de forma no esperada. Deshabilita esta función si encuentras dichos problemas."
+        },
+        "take_over_control": {
+          "description": "Deshabilita Adaptive Lighting si otra fuente llama `light.turn_on` mientras las luces se estan adaptando. Cuidado porque esto llama a `homeassistant.update_entity` cada`interval`! 🔒"
+        },
+        "initial_transition": {
+          "description": "Duración de la primera transición cuando las luces pasan de `off` a `on` en segundos. ⏲️"
+        },
+        "transition": {
+          "description": "Duración de la transición cuando las luces se adaptan, en segundos. ⏲️"
+        },
+        "entity_id": {
+          "description": "ID de la entidad del interruptor. 📝"
+        },
+        "sleep_transition": {
+          "description": "Duración de la transición cuando el \"modo noche\" se activa o desactiva, en segundos. 😴"
+        },
+        "min_brightness": {
+          "description": "Porcentaje mínimo de brillo. 💡"
+        },
+        "include_config_in_attributes": {
+          "description": "Muestra todas las opciones como atributos del interruptor en Home Assistant cuando sea `true`. 📝"
+        },
+        "prefer_rgb_color": {
+          "description": "Preferir ajustes de color RGB a temperatura de color cuando sea posible. 🌈"
+        },
+        "turn_on_lights": {
+          "description": "Encender (o no) luces que estén apagadas. 🔆"
+        },
+        "max_brightness": {
+          "description": "Porcentaje máximo de brillo. 💡"
+        },
+        "use_defaults": {
+          "description": "Define los valores por defecto no especificados en la llamada al servicio. Opciones: \"current\" (predeterminado, mantiene los valores actuales), \"factory\" (resetea a los valores documentados predeterminados), o \"configuration\" (revierte a los valores por defecto del interruptor). ⚙️"
+        },
+        "separate_turn_on_commands": {
+          "description": "Usar llamadas independientes a`light.turn_on` para color y brillo, necesario para cierto tipo de luces. 🔀"
+        },
+        "min_color_temp": {
+          "description": "Temperatura de color más cálida en grados Kelvin. 🔥"
+        },
+        "autoreset_control_seconds": {
+          "description": "Resetear automáticamente el control manual tras `x` segundos. Poner a 0 para deshabilitar. ⏲️"
+        },
+        "sleep_brightness": {
+          "description": "Porcentaje de brillo en el modo noche. 😴"
+        },
+        "sleep_rgb_color": {
+          "description": "Color RGB en modo noche(usado cuando `sleep_rgb_or_color_temp` es \"rgb_color\"). 🌈"
+        },
+        "sunrise_time": {
+          "description": "Fijar una hora (HH:MM:SS) para el amanecer. 🌅"
+        },
+        "sunset_time": {
+          "description": "Fijar una hora (HH:MM:SS) para el atardecer. 🌇"
+        },
+        "min_sunset_time": {
+          "description": "Define el atardecer virtual más temprano (HH:MM:SS), permitiendo atardeceres más tardíos. 🌇"
+        },
+        "max_sunrise_time": {
+          "description": "Define el amanecer virtual más tardío (HH:MM:SS), permitiendo amaneceres más tempranos. 🌅"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Usar el modo`\"rgb_color\"` o `\"color_temp\"` en el modo noche. 🌙"
+        },
+        "adapt_delay": {
+          "description": "Tiempo de espera (segundos) entre el encendido de la luz y Adaptive Lighting aplicando cambios. Puede ayudar a evitar parpadeos. ⏲️"
+        }
+      },
+      "description": "Modifica cualquier ajuste que quieras en el interruptor. Todas las opciones aquí presentes son idénticas a la configuración del flujo."
+    },
+    "set_manual_control": {
+      "fields": {
+        "manual_control": {
+          "description": "Añadir (\"true\") o quitar (\"false\") la luz de la lista de `manual_control`. 🔒"
+        },
+        "lights": {
+          "description": "entity_id(s) de las luces, si no se especifica, se seleccionaran todas las luces vinculadas al interruptor. 💡"
+        },
+        "entity_id": {
+          "description": "El `entity_id` del interruptor en el cual (des)marcar la luz como estando `manually controlled`. 📝"
+        }
+      },
+      "description": "Señala si una luz está 'controlada manualmente'."
+    }
+  },
+  "config": {
+    "step": {
+      "user": {
+        "title": "Elige un nombre para la instancia de Adaptive Lighting",
+        "description": "Cada instancia puede contener múltiples luces!"
+      },
+      "menu": {
+        "title": "Crear o duplicar",
+        "description": "¿Quieres crear una nueva instancia o duplicar una existente?",
+        "data": {
+          "action": "Acción"
+        }
+      }
+    },
+    "abort": {
+      "already_configured": "El dispositivo ya está configurado"
+    }
+  }
+}

custom_components/adaptive_lighting/translations/et.json

@@ -21,25 +21,33 @@
         "description": "Kohanduva valguse suvandid. Valikute nimetused ühtuvad YAML kirjes olevatega. Valikuid ei kuvata kui seadistus on tehtud YAML kirjes.",
         "data": {
           "lights": "valgustid",
-          "initial_transition": "Algne üleminek kui valgustid lülituvad sisse/välja või unerežiim muutub",
           "interval": "Intervall, aeg muutuste vahel sekundites",
-          "max_brightness": "Suurim heledus %",
-          "max_color_temp": "Suurim värvustemperatuur Kelvinites",
+          "transition": "Üleminekud, sekundites",
           "min_brightness": "Vähim heledus %",
+          "max_brightness": "Suurim heledus %",
           "min_color_temp": "Vähim värvustemperatuur Kelvinites",
-          "only_once": "Ainult üks kord, rakendub ainult valgusti sisselülitamisel",
-          "prefer_rgb_color": "Eelista RGB värve, võimalusel kasuta RGB sätteid värvustemperatuuri asemel",
-          "separate_turn_on_commands": "Eraldi lülitused iga valiku (värvus, heledus jne.) sisselülitamiseks, mõned valgustid vajavad seda.",
+          "max_color_temp": "Suurim värvustemperatuur Kelvinites",
           "sleep_brightness": "Unerežiimi heledus %",
-          "sleep_color_temp": "Uneržiimi värvus Kelvinites",
-          "sunrise_offset": "Nihe päikesetõusust, +/- sekundit",
-          "sunrise_time": "Päikesetõusu aeg 'HH:MM:SS' vormingus. (Kui jätta tühjaks kasutatakse asukohajärgset)",
-          "sunset_offset": "Nihe päikeseloojangust, +/- sekundit",
-          "sunset_time": "Päikeseloojangu aeg 'HH:MM:SS' vormingus. (Kui jätta tühjaks kasutatakse asukohajärgset)",
-          "take_over_control": "Käsitsi juhtimine: kui miski peale kohanduva valguse enda lültiab valgusti sisse ja see juba põleb, katkesta kohandamine kuni järgmise välise lülitamiseni.",
-          "detect_non_ha_changes": "Märka väliseid lülitusi: kui mõni säte muutub üle 10% (isegi väljaspoolt HA juhituna) siis peab käsitsi juhtimine olema lubatud (kutsutakse 'homeassistant.update_entity')'interval'!)",
-          "transition": "Üleminekud, sekundites"
-        }
+          "sleep_color_temp": "Uneržiimi värvus Kelvinites"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "Algne üleminek kui valgustid lülituvad sisse/välja või unerežiim muutub",
+              "prefer_rgb_color": "Eelista RGB värve, võimalusel kasuta RGB sätteid värvustemperatuuri asemel",
+              "sunrise_time": "Päikesetõusu aeg 'HH:MM:SS' vormingus. (Kui jätta tühjaks kasutatakse asukohajärgset)",
+              "sunrise_offset": "Nihe päikesetõusust, +/- sekundit",
+              "sunset_time": "Päikeseloojangu aeg 'HH:MM:SS' vormingus. (Kui jätta tühjaks kasutatakse asukohajärgset)",
+              "sunset_offset": "Nihe päikeseloojangust, +/- sekundit",
+              "take_over_control": "Käsitsi juhtimine: kui miski peale kohanduva valguse enda lültiab valgusti sisse ja see juba põleb, katkesta kohandamine kuni järgmise välise lülitamiseni.",
+              "detect_non_ha_changes": "Märka väliseid lülitusi: kui mõni säte muutub üle 10% (isegi väljaspoolt HA juhituna) siis peab käsitsi juhtimine olema lubatud (kutsutakse 'homeassistant.update_entity')'interval'!)",
+              "only_once": "Ainult üks kord, rakendub ainult valgusti sisselülitamisel",
+              "separate_turn_on_commands": "Eraldi lülitused iga valiku (värvus, heledus jne.) sisselülitamiseks, mõned valgustid vajavad seda."
+            },
+            "data_description": {}
+          }
+        },
+        "data_description": {}
       }
     },
     "error": {

custom_components/adaptive_lighting/translations/fi.json

@@ -0,0 +1,210 @@
+{
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sleep_brightness": {
+          "description": "Valojen kirkkausmäärä prosenteissa unitilassa (sleep mode)."
+        },
+        "sunrise_offset": {
+          "description": "Muuta auringonnousun aikaa positiivisella tai negatiivisella korjauksella määritettynä sekunneissa."
+        },
+        "initial_transition": {
+          "description": "Ensimmäisen siirtymän kesto sekunneissa, kun valot kytketään 'off'-tilasta 'on'-tilaan."
+        },
+        "autoreset_control_seconds": {
+          "description": "Resetoi manuaalisen ohjauksen automaattisesti määritetyn sekuntimäärän jälkeen. Aseta arvoon 0 jos et halua käyttää asetusta."
+        },
+        "only_once": {
+          "description": "Adaptoi valoja vain kun ne kytketään päälle ('true') tai adaptoi niitä jatkuvasti ('false')"
+        },
+        "max_color_temp": {
+          "description": "Kylmin värilämpötila Kelvin-asteikolla."
+        },
+        "sunset_offset": {
+          "description": "Muuta auringonlaskun aikaa positiivisella tai negatiivisella korjauksella määritettynä sekunneissa."
+        },
+        "send_split_delay": {
+          "description": "Viive (ms) `separate_turn_on_commands` välillä valoille, jotka eivät tue yhtäaikaista kirkkauden ja värilämpötilan säätöä."
+        },
+        "transition": {
+          "description": "Valojen siirtymän kesto sekunneissa, kun valaistusta muutetaan."
+        },
+        "sleep_color_temp": {
+          "description": "Värilämpötila lepotilassa (käytetään, kun `sleep_rgb_or_color_temp` on `color_temp`) kelvineinä. 😴"
+        },
+        "detect_non_ha_changes": {
+          "description": "Havaitsee ja pysäyttää mukautukset ei-\"light.turn_on\" -tilanmuutoksille. Vaatii \"take_over_control\":n käyttöönoton. 🕵️ Varoitus: ⚠️ Jotkut valot saatavat osoittaa virheellisesti 'on'-tilan, mikä voi johtaa valojen syttymiseen odottamatta. Poista tämä ominaisuus käytöstä, jos kohtaat tällaisia ongelmia."
+        },
+        "sunrise_time": {
+          "description": "Aseta kiinteä aika (TT:MM:SS) auringonnousulle. 🌅"
+        },
+        "use_defaults": {
+          "description": "Asettaa oletusarvot, joita ei ole määritetty tässä palvelukutsussa. Vaihtoehdot: \"nykyinen\" (oletus, säilyttää nykyiset arvot), \"tehdas\" (palauttaa dokumentoituihin oletusasetuksiin) tai \"kokoonpano\" (palaa kokoonpanon oletusasetusten vaihtamiseksi). ⚙️"
+        },
+        "max_sunrise_time": {
+          "description": "Aseta viimeisin virtuaalinen auringonnousuaika (TT:MM:SS), aikaisempia auringonnousuja sallien. 🌅"
+        },
+        "separate_turn_on_commands": {
+          "description": "Käytä erillisiä \"light.turn_on\" -kutsuja värin ja kirkkauden määrittämiseksi, joita tarvitaan joissakin valotyypeissä. 🔀"
+        },
+        "entity_id": {
+          "description": "Kytkimen entiteettitunnus. 📝"
+        },
+        "turn_on_lights": {
+          "description": "Sytytetäänkö valot, jotka ovat tällä hetkellä pois päältä. 🔆"
+        },
+        "include_config_in_attributes": {
+          "description": "Näytä kaikki vaihtoehdot attribuutteina kotiavustajan kytkimellä, kun sen arvo on \"true\". 📝"
+        },
+        "sleep_transition": {
+          "description": "Siirtymän kesto, kun \"lepotila\" vaihdetaan sekunneiksi. 😴"
+        },
+        "max_brightness": {
+          "description": "Enimmäiskirkkausprosentti. 💡"
+        },
+        "min_brightness": {
+          "description": "Vähittäiskirkkausprosentti. 💡"
+        },
+        "sleep_rgb_color": {
+          "description": "RGB-väri lepotilassa (käytetään, kun `sleep_rgb_or_color_temp` on \"rgb_color\"). 🌈"
+        },
+        "sunset_time": {
+          "description": "Aseta kiinteä aika (TT:MM:SS) auringonlaskulle. 🌇"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Käytä joko `\"rgb_color\"` tai `\"color_temp\"` lepotilassa. 🌙"
+        },
+        "min_color_temp": {
+          "description": "Lämpimin värilämpötila kelvineissä. 🔥"
+        },
+        "prefer_rgb_color": {
+          "description": "Halutaanko RGB-värinsäätö mieluummin valon värilämpötilan sijaan, kun mahdollista. 🌈"
+        },
+        "take_over_control": {
+          "description": "Poista Adaptive Lighting käytöstä, jos toinen lähde kutsuu `light.turn_on`, kun valot ovat päällä ja niitä mukautetaan. Huomaa, että tämä kutsuu `homeassistant.update_entity` joka `interval`! 🔒"
+        },
+        "min_sunset_time": {
+          "description": "Aseta aikaisin virtuaalinen auringonlaskuaika (TT:MM:SS), myöhempiä auringonlaskuja sallien. 🌇"
+        },
+        "adapt_delay": {
+          "description": "Odotusaika (sekunteina) valon syttymisen ja Adaptive Lightingin muutosten käyttöönoton välillä. Saattaa auttaa välttämään välkkymistä. ⏲️"
+        }
+      },
+      "description": "Muuta haluamiasi asetuksia kytkimessä. Kaikki vaihtoehdot ovat samat kuin kokoonpanon kulussa."
+    },
+    "apply": {
+      "description": "Asettaa nykyiset Adaptiivisen Valaistuksen asetukset valoihin.",
+      "fields": {
+        "lights": {
+          "description": "Valo (tai lista valoista) joihin näitä asetuksia sovelletaan."
+        },
+        "transition": {
+          "description": "Valojen siirtymän kesto sekunneissa, kun valaistusta muutetaan."
+        },
+        "entity_id": {
+          "description": "Kytkimen `entity_id` ja käytettävät asetukset. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Mukautetaanko valon kirkkautta. 🌞"
+        },
+        "adapt_color": {
+          "description": "Mukautetaanko tukivalojen väriä. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Halutaanko RGB-värinsäätö mieluummin valon värilämpötilan sijaan, kun mahdollista. 🌈"
+        },
+        "turn_on_lights": {
+          "description": "Sytytetäänkö valot, jotka ovat tällä hetkellä pois päältä. 🔆"
+        }
+      }
+    },
+    "set_manual_control": {
+      "fields": {
+        "lights": {
+          "description": "Valojen entity_id(s), jos sitä ei ole määritetty, kaikki kytkimen valot valitaan. 💡"
+        },
+        "entity_id": {
+          "description": "Kytkimen `entity_id`, jolla valo määritetään `manuaalisesti ohjattavaksi`. 📝"
+        },
+        "manual_control": {
+          "description": "Lisätäänkö (\"true\") vai poistetaanko (\"false\") valo \"manual_control\"-luettelosta. 🔒"
+        }
+      },
+      "description": "Merkitse, onko valo 'manuaalisesti ohjattu'."
+    }
+  },
+  "title": "Adaptiivinen valaistus",
+  "options": {
+    "step": {
+      "init": {
+        "data_description": {
+          "interval": "Tiheys valojen mukauttamiseen sekunneissa. 🔄",
+          "transition": "Valojen siirtymän kesto sekunneissa, kun valaistusta muutetaan.",
+          "sleep_brightness": "Valojen kirkkausmäärä prosenteissa unitilassa (sleep mode).",
+          "sleep_color_temp": "Värilämpötila lepotilassa (käytetään, kun `sleep_rgb_or_color_temp` on `color_temp`) kelvineinä. 😴"
+        },
+        "description": "Määritä Adaptive Lighting -komponentti. Vaihtoehtojen nimet vastaavat YAML-asetuksia. Jos olet määrittänyt tämän merkinnän YAML:ssa, tässä ei näy vaihtoehtoja. Interaktiiviset kaaviot, jotka esittelevät parametrien vaikutuksia, on [tässä verkkosovelluksessa]({webapp_url}). Lisätietoja löytyy [virallisesta dokumentaatiosta]({docs_url}).",
+        "data": {
+          "lights": "lights: Luettelo ohjattavista valon entity_ids:stä (voi olla tyhjä). 🌟",
+          "min_brightness": "min_brightness: Vähittäiskirkkausprosentti. 💡",
+          "max_brightness": "max_brightness: Enimmäiskirkkausprosentti. 💡",
+          "min_color_temp": "min_color_temp: Lämpimin värilämpötila kelvineinä. 🔥",
+          "max_color_temp": "max_color_temp: Kylmin värilämpötila kelvineinä. ❄️"
+        },
+        "title": "Adaptive Lightingin vaihtoehdot",
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "prefer_rgb_color: valitaanko RGB-värien säätö valon värilämpötilan sijaan, kun mahdollista. 🌈",
+              "transition_until_sleep": "shift_until_sleep: Kun käytössä, Adaptive Lighting käsittelee lepoasetukset miniminä ja siirtyy näihin arvoihin auringonlaskun jälkeen. 🌙",
+              "take_over_control": "take_over_control: Poista mukautuva valaistus käytöstä, jos toinen lähde kutsuu `light.turn_on`, kun valot ovat päällä ja niitä mukautetaan. Huomaa, että tämä kutsuu `homeassistant.update_entity` joka `interval`! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: Havaitsee ja pysäyttää mukautukset ei-\"light.turn_on\" -tilanmuutoksille. Vaatii \"take_over_control\" käyttöönoton. 🕵️ Varoitus: ⚠️ Jotkut valot saatavat osoittaa virheellisesti 'on'-tilan, mikä voi johtaa valojen syttymiseen odottamatta. Poista tämä ominaisuus käytöstä, jos kohtaat tällaisia ongelmia.",
+              "only_once": "only_once: Mukauta valot vain, kun ne ovat päällä (\"true\") tai mukauta niitä jatkuvasti (\"false\"). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Kun valot sytytetään ensimmäisen kerran. Jos asetuksena on \"true\", Adaptive Lighting mukautuu vain, jos \"light.turn_on\" kutsutaan määrittelemättä väriä tai kirkkautta. ❌🌈 Tämä esimerkiksi estää mukautumisen näkymää aktivoitaessa. Jos \"false\", Adaptive Lighting mukautuu riippumatta siitä, onko alkuperäisessä \"service_data\"-arvossa väri tai kirkkaus. Vaatii \"take_over_control\":n käyttöönoton. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Käytä erillisiä `light.turn_on`-kutsuja värin ja kirkkauden määrittämiseksi, joita tarvitaan joissakin valotyypeissä. 🔀",
+              "skip_redundant_commands": "skip_redundant_commands: Ohita mukautuskomentojen lähettäminen, joiden kohdetila on jo yhtä suuri kuin valon tunnettu tila. Minimoi verkkoliikenteen ja parantaa mukautumisvastetta joissain tilanteissa. 📉 Poista käytöstä, jos fyysiset valotilat eivät ole synkronoitu kotiavustajan tallennetun tilan kanssa.",
+              "intercept": "intercept: sieppaa ja mukauta \"light.turn_on\"-kutsut mahdollistamaan välitön värin ja kirkkauden mukauttaminen. 🏎️ Poista käytöstä valot, jotka eivät tue \"light.turn_on\" värin ja kirkkauden kanssa.",
+              "multi_light_intercept": "multi_light_intercept: sieppaa ja mukauta light.turn_on-kutsut, jotka kohdistuvat useisiin valoihin. ➗⚠️ Tämä saattaa johtaa yksittäisen light.turn_on-kutsun jakamiseen useiksi kutsuiksi, esimerkiksi kun valot ovat eri kytkimissä. Vaadi `intercept`:n käyttöönotto.",
+              "include_config_in_attributes": "include_config_in_attributes: Näytä kaikki vaihtoehdot attribuutteina Kotiavustajan kytkimessä, kun asetuksena on \"true\". 📝"
+            },
+            "data_description": {
+              "initial_transition": "Ensimmäisen siirtymän kesto sekunneissa, kun valot kytketään 'off'-tilasta 'on'-tilaan.",
+              "sleep_rgb_or_color_temp": "Käytä joko `\"rgb_color\"` tai `\"color_temp\"` lepotilassa. 🌙",
+              "sleep_rgb_color": "RGB-väri lepotilassa (käytetään, kun `sleep_rgb_or_color_temp` on \"rgb_color\"). 🌈",
+              "sleep_transition": "Siirtymän kesto, kun \"lepotila\" vaihdetaan sekunneiksi. 😴",
+              "sunrise_time": "Aseta kiinteä aika (TT:MM:SS) auringonnousulle. 🌅",
+              "min_sunrise_time": "Aseta aikaisin virtuaalinen auringonnousuaika (TT:MM:SS), myöhempiä auringonnousuja sallien. 🌅",
+              "max_sunrise_time": "Aseta aikaisin virtuaalinen auringonnousuaika (TT:MM:SS), aikaisempia auringonnousuja sallien. 🌅",
+              "sunrise_offset": "Muuta auringonnousun aikaa positiivisella tai negatiivisella korjauksella määritettynä sekunneissa.",
+              "sunset_time": "Aseta kiinteä aika (TT:MM:SS) auringonlaskulle. 🌇",
+              "min_sunset_time": "Aseta aikaisin virtuaalinen auringonlaskuaika (TT:MM:SS), myöhempiä auringonlaskuja sallien. 🌅",
+              "max_sunset_time": "Aseta viimeisin virtuaalinen auringonlaskuaika (TT:MM:SS), jotta aikaisemmat auringonlaskut ovat mahdollisia. 🌇",
+              "sunset_offset": "Muuta auringonlaskun aikaa positiivisella tai negatiivisella korjauksella määritettynä sekunneissa.",
+              "brightness_mode": "Kirkkaus-moodi jota käytetään. Mahdolliset arvot ovat `default`, `linear`, and `tanh` (käyttää arvoja `brightness_mode_time_dark` ja `brightness_mode_time_light`).",
+              "brightness_mode_time_dark": "(Ohitetaan, jos `brightness_mode='default'`) Kesto sekunteina kirkkauden lisäämiseen/vähentämiseen auringonnousun/auringonlaskun jälkeen/ennen. 📈📉.",
+              "brightness_mode_time_light": "(Ohitetaan, jos `brightness_mode='default'`) Kesto sekunteina kirkkauden lisäämiseen/vähentämiseen auringonnousun/auringonlaskun jälkeen/ennen. 📈📉.",
+              "autoreset_control_seconds": "Resetoi manuaalisen ohjauksen automaattisesti määritetyn sekuntimäärän jälkeen. Aseta arvoon 0 jos et halua käyttää asetusta.",
+              "send_split_delay": "Viive (ms) `separate_turn_on_commands` välillä valoille, jotka eivät tue yhtäaikaista kirkkauden ja värilämpötilan säätöä.",
+              "adapt_delay": "Odotusaika (sekunteina) valon syttymisen ja Adaptive Lightingin muutosten käyttöönoton välillä. Saattaa auttaa välttämään välkkymistä. ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "Virheellinen vaihtoehto",
+      "entity_missing": "Kotiavustajasta puuttuu yksi tai useampi valittu valoentiteetti"
+    }
+  },
+  "config": {
+    "step": {
+      "user": {
+        "title": "Valitse nimi tälle Adaptiivisen Valaistuksen esiintymälle",
+        "description": "Jokainen esiintymä voi sisältää useita valoja!"
+      }
+    },
+    "abort": {
+      "already_configured": "Tämä laite on jo määritetty"
+    }
+  }
+}

custom_components/adaptive_lighting/translations/fr.json

@@ -4,10 +4,14 @@
     "step": {
       "user": {
         "title": "Choisissez un nom pour cette instance d'éclairage adaptatif",
-        "description": "Choisissez un nom pour cette instance. Vous pouvez configurer plusieurs instances d'éclairage adaptatif, chacune pouvant contrôler plusieurs lampes !",
+        "description": "Chaque instance peut contenir plusieurs lumières",
         "data": {
           "name": "Nom"
         }
+      },
+      "menu": {
+        "title": "Créer ou dupliquer",
+        "description": "Voulez-vous créer une nouvelle instance, ou dupliquer une existante ?"
       }
     },
     "abort": {
@@ -18,34 +22,206 @@
     "step": {
       "init": {
         "title": "Options d'éclairage adaptatif",
-        "description": "Tous les paramètres de l'instance d'éclairage adaptatif. Les noms des options correspondent aux paramètres YAML. Aucune option n'est affichée si l'entrée adaptive_lighting est définie dans votre configuration YAML.",
+        "description": "Configurer un composant d'éclairage adaptatif. Les noms correspondent aux paramètres YAML. Si vous avez défini cette entrée en YAML, aucune option n'apparaît ici. Pour les graphiques interactifs qui montrent les effets des paramètres, visiter [cette application web]({webapp_url}). Pour plus de détail, voir la [documentation]({docs_url})",
         "data": {
-          "lights": "lights : Les lampes à contrôler",
-          "initial_transition": "initial_transition : Transition (en secondes) lorsque l'état d'une lampe passe d'« éteinte » à « allumée ».",
-          "sleep_transition": "sleep_transition : Transition (en secondes) lorsque « sleep_state » est commuté.",
+          "lights": "lights : Liste d'\"entity_ids\" de lumières à controller (peu être vide). 🌟",
           "interval": "interval : Temps (en secondes) entre deux mises à jour du commutateur.",
-          "max_brightness": "max_brightness : Luminosité maximale des lampes (en pourcentage) au cours d'un cycle.",
-          "max_color_temp": "max_color_temp : Couleur la plus froide (en kelvins) du cycle de température de couleur.",
-          "min_brightness": "min_brightness : Luminosité minimale des lampes (en pourcentage) au cours d'un cycle.",
-          "min_color_temp": "min_color_temp : Couleur la plus chaude (en kelvins) du cycle de température de couleur.",
-          "only_once": "only_once : Adapter les lampes uniquement au moment où elles sont allumées.",
-          "prefer_rgb_color": "prefer_rgb_color : Utiliser « rgb_color » plutôt que « color_temp » lorsque cela est possible.",
-          "separate_turn_on_commands": "separate_turn_on_commands : Séparer les commandes pour chaque attribut (couleur, luminosité, etc.) de « light.turn_on » (nécessaire pour certaines lampes).",
+          "transition": "transition : Durée de la transition (en secondes) des changements appliqués aux lampes.",
+          "min_brightness": "min_brightness : Luminosité minimale en pourcentage. 💡",
+          "max_brightness": "max_brightness : Luminosité maximum (en pourcentage). 💡",
+          "min_color_temp": "min_color_temp : Couleur de température la plus chaude en kelvins. 🔥",
+          "max_color_temp": "max_color_temp : Couleur la plus froide (en Kelvins). ❄️",
           "sleep_brightness": "sleep_brightness : Luminosité (en pourcentage) du mode nuit.",
-          "sleep_color_temp": "sleep_color_temp : Température de couleur (en kelvins) du mode nuit.",
-          "sunrise_offset": "sunrise_offset : Décalage (en secondes [- : passé, + : futur]) du cycle par rapport au lever du soleil.",
-          "sunrise_time": "sunrise_time : Heure (HH:MM:SS) du lever du soleil. Si « None », utilise l'heure correspondant à votre emplacement.",
-          "sunset_offset": "sunset_offset : Décalage (en secondes [- : passé, + : futur]) du cycle par rapport au coucher du soleil.",
-          "sunset_time": "sunset_time : Heure (HH:MM:SS) du coucher du soleil. Si « None », utilise l'heure correspondant à votre emplacement.",
-          "take_over_control": "take_over_control : Si quelque chose d'autre que l'éclairage adaptatif appelle « light.turn_on » alors qu'une lampe est déjà allumée, cesser d'adapter cette lampe jusqu'à ce qu'elle (ou le commutateur) soit éteinte puis rallumée.",
-          "detect_non_ha_changes": "detect_non_ha_changes : Détecter tout changement de plus de 10 % appliqué aux lampes (même en dehors de HA). Nécessite que « take_over_control » soit activé. (Appelle « homeassistant.update_entity » tous les « interval » !)",
-          "transition": "transition : Durée de la transition (en secondes) des changements appliqués aux lampes."
+          "sleep_color_temp": "sleep_color_temp : Température de couleur (en kelvins) du mode nuit."
+        },
+        "data_description": {
+          "interval": "Fréquence d'adaptation des lumières, en secondes. 🔄",
+          "transition": "Durée de la transition des changements lumineux, en secondes. 🕑",
+          "sleep_brightness": "Pourcentage de luminosité des lumières en mode nuit. 😴",
+          "sleep_color_temp": "Température de couleur en mode nuit en Kelvin (utilisée lorsque \"sleep_rgb_or_color_temp\" est égaler à \"color_temp\") . 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition : Transition (en secondes) lorsque l'état d'une lampe passe d'« éteinte » à « allumée ».",
+              "prefer_rgb_color": "prefer_rgb_color : Indique s'il est préférable d'utiliser le réglage de couleur RBG plutôt que la température de couleur lorsque cela est possible. 🌈",
+              "sleep_transition": "sleep_transition : Transition (en secondes) lorsque « sleep_state » est commuté.",
+              "transition_until_sleep": "transition_until_sleep : Lorsque cela est activée, l'éclairage Adaptatif considérera les paramètres du mode nuit comme le minimum, effectuant la transition vers ces valeurs après le coucher du soleil. 🌙",
+              "sunrise_time": "sunrise_time : Heure (HH:MM:SS) du lever du soleil. Si « None », utilise l'heure correspondant à votre emplacement.",
+              "sunrise_offset": "sunrise_offset : Décalage (en secondes [- : passé, + : futur]) du cycle par rapport au lever du soleil.",
+              "sunset_time": "sunset_time : Heure (HH:MM:SS) du coucher du soleil. Si « None », utilise l'heure correspondant à votre emplacement.",
+              "sunset_offset": "sunset_offset : Décalage (en secondes [- : passé, + : futur]) du cycle par rapport au coucher du soleil.",
+              "take_over_control": "take_over_control : Désactive l'éclairage adaptatif si une autre source appelle \"light.turn_on\" pendant que la lumière est allumée ou adoptée. Notez que cela appelle \"homeassistant.update_entity\" chaque \"interval\"! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes : Détecter et arrête les changement d'états autre que \"light.turn_on\". Nécessite que \"take_over_control\" soit activé. 🕵️ Attention : ⚠️ Certaines lumière peuvent faussement indiqué un état \"on\", ce qui pourrait occasionner des lumières s'allumant de façon inattendu. Désactivez cette fonctionnalité si vous rencontrez de tels problème.",
+              "only_once": "only_once : Adapter les lampes uniquement au moment où elles sont allumées. 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Lors de l'allumage initiale des lumières. Si le paramètre est \"vrai\", AL s'adapte uniquement si l'on invoque \"light.turn_on\" sans préciser la couleur ou la luminosité. ❌🌈 Ceci, par exemple, empêche l'adaptation lors de l'activation d'une scène. Si \"false\", AL adapte indépendamment de la présence de couleur ou de luminosité dans le \"service_data\" initial. \"take_over_control\" doit être activé. 🕵",
+              "separate_turn_on_commands": "separate_turn_on_commands : Utiliser des appels \"light.turn_on\" séparés pour la couleur et la luminosité, nécessaires pour certains types de lumière. 🔀",
+              "skip_redundant_commands": "skip_redundant_commands : Évite d'envoyer des commandes d'adaptation lorsque l'état cible est déjà égal à l'état connu de la lumière. Minimise le trafic réseau et améliore la réactivité de l'adaptation dans certaines situations. 📉 Désactivez si les états physiques des lumières ne correspondent pas à l'état enregistré de Home Assistant.",
+              "intercept": "intercept : Intercepter et adapter les appels à \"light.turn_on\" pour permettre une adaptation instantanée de la couleur et de la luminosité. 🏎️ Désactivez cette option pour les lumières qui ne prennent pas en charge \"light.turn_on\" avec couleur et luminosité.",
+              "multi_light_intercept": "multi_light_intercept : Intercepte et adapte les appels à \"light.turn_on\" qui ciblent plusieurs lumières. ➗⚠️ Cela peut entraîner la division d'un seul appel \"light.turn_on\" en plusieurs appels, par exemple, lorsque les lumières sont dans différents interrupteurs. Nécessite que \"intercept\" soit activé.",
+              "include_config_in_attributes": "include_config_in_attributes : Afficher toutes les options en tant qu'attributs sur l'interrupteur dans Home Assistant lorsqu'il est défini sur \"true\". 📝"
+            },
+            "data_description": {
+              "initial_transition": "Durée de la première transition des lampes passent de \"off\" à \"on\" (en secondes). ⏲️",
+              "sleep_rgb_or_color_temp": "Utilisez soit \"rgb_color\" soit \"color_temp\" en mode nuit. 🌙",
+              "sleep_rgb_color": "Couleur RGB en mode nuit (utilisée lorsque \"sleep_rgb_or_color_temp\" est \"rgb_color\"). 🌈",
+              "sleep_transition": "Durée de la transition quand le \"mode nuit\" est déclenché. (en secondes) 😴",
+              "sunrise_time": "Définir une heure fixe (HH:MM:SS) pour le lever du soleil. 🌅",
+              "min_sunrise_time": "Définir l'heure virtuelle de lever du soleil la plus précoce (HH:MM:SS), permettant des levers de soleil tardifs. 🌅",
+              "max_sunrise_time": "Définir l'heure virtuelle de lever du soleil la plus tardive (HH:MM:SS), permettant des levers de soleil plus tôt. 🌅",
+              "sunrise_offset": "Ajuster l'heure du lever de soleil avec un décalage positif ou négatif en secondes. ⏰",
+              "sunset_time": "Définir une heure fixe (HH:MM:SS) pour le coucher du soleil. 🌇",
+              "min_sunset_time": "Définir l'heure virtuelle de coucher du soleil la plus précoce (HH:MM:SS), permettant des couchers de soleil tardifs. 🌇",
+              "max_sunset_time": "Définir l'heure virtuelle de coucher du soleil la plus tardive (HH:MM:SS), permettant des couchers de soleil plus précoces. 🌇",
+              "sunset_offset": "Réglez le l'heure de coucher du soleil avec un décalage positif ou négatif en quelques secondes. ⏰",
+              "brightness_mode": "Mode de luminosité à utiliser. Les valeurs possibles sont \"défaut\" , \"linear\" (linéaire) et \"tanh\" (tangente) utilise \"brightness_mode_time_dark\" et \"brightness_mode_time_light\". 📈",
+              "brightness_mode_time_dark": "(Ignoré si \"brightness_mode='default'\") La durée en secondes pour augmenter/diminuer progressivement la luminosité après/avant le lever/coucher du soleil. 📈📉.",
+              "brightness_mode_time_light": "(Ignoré si \"brightness_mode='default'\") La durée en secondes pour augmenter/diminuer progressivement la luminosité après/avant le lever/coucher du soleil. 📈📉.",
+              "autoreset_control_seconds": "Réinitialiser automatiquement la commande manuelle après un certain nombre de secondes. Définir à 0 pour désactiver. ⏲️",
+              "send_split_delay": "Délai (ms) entre \"separate_turn_on_commands\" pour les lumières qui ne supportent pas la commande de luminosité et le réglage de couleur en même temps. ⏲️",
+              "adapt_delay": "Temps d'attente (en secondes) entre l'allumage de la lumière et l'application des changements par l'Éclairage Adaptatif. Peut aider à éviter les scintillements. ⏲️"
+            }
+          }
         }
       }
     },
     "error": {
-      "option_error": "Option non valide",
-      "entity_missing": "Une lumière sélectionnée n’a pas été trouvée"
+      "option_error": "Option invalide",
+      "entity_missing": "Une ou plusieurs entités lumières sélectionnées sont manquantes de Home Assistant"
+    }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sleep_brightness": {
+          "description": "Pourcentage de luminosité des lumières en mode nuit. 😴"
+        },
+        "only_once": {
+          "description": "Adapter les lumières seulement quand elles sont allumées (\"vrai\") ou quel que soit leur état (\"faux\")."
+        },
+        "sunrise_offset": {
+          "description": "Ajustez l'heure de lever de soleil avec un décalage positif ou négatif en secondes. ⏰"
+        },
+        "max_color_temp": {
+          "description": "Température de couleur la plus froide en Kelvin. ❄️"
+        },
+        "send_split_delay": {
+          "description": "Délai (ms) entre \"separate_turn_on_commands\" pour les lumières qui ne supportent pas la commande de luminosité et le réglage de couleur en même temps. ⏲️"
+        },
+        "detect_non_ha_changes": {
+          "description": "detect_non_ha_changes : Détecter et arrête les changement d'états autre que \"light.turn_on\". Nécessite que \"take_over_control\" soit activé. 🕵️ Attention : ⚠️ Certaines lumière peuvent faussement indiqué un état \"on\", ce qui pourrait occasionner des lumières s'allumant de façon inattendu. Désactivez cette fonctionnalité si vous rencontrez de tels problème."
+        },
+        "autoreset_control_seconds": {
+          "description": "Réinitialiser automatiquement la commande manuelle après un certain nombre de secondes. Définir à 0 pour désactiver. ⏲️"
+        },
+        "sunset_offset": {
+          "description": "Ajustez l'heure de coucher de soleil avec un décalage positif ou négatif en secondes. ⏰"
+        },
+        "sleep_color_temp": {
+          "description": "Température de couleur en mode nuit en Kelvin (utilisé lorsque \"sleep_rgb_or_color_temp\" est défini sur \"color_temp\") . 😴"
+        },
+        "entity_id": {
+          "description": "ID de l'Entité de l'interrupteur. 📝"
+        },
+        "initial_transition": {
+          "description": "Durée de la première transition des lampes passant de \"off\" à \"on\" (en secondes). ⏲️"
+        },
+        "transition": {
+          "description": "Durée de la transition des changements lumineux, en secondes. 🕑"
+        },
+        "sleep_transition": {
+          "description": "Durée de la transition quand le \"mode nuit\" est déclenché en secondes. 😴"
+        },
+        "min_brightness": {
+          "description": "Pourcentage de luminosité minimum. 💡"
+        },
+        "sunrise_time": {
+          "description": "Définir une heure fixe (HH:MM:SS) pour le lever du soleil. 🌅"
+        },
+        "max_brightness": {
+          "description": "Pourcentage de luminosité maximale. 💡"
+        },
+        "take_over_control": {
+          "description": "Désactiver l'Éclairage Adaptatif si une autre source appelle \"light.turn_on\" lorsque les lumières sont allumées et en cours d'adaptation. Notez que cela appelle \"homeassistant.update_entity\" à chaque \"intervalles\" ! 🔒"
+        },
+        "use_defaults": {
+          "description": "Définit les valeurs par défaut non spécifiées dans cet appel de service. Options : \"current\" (par défaut, conserve les valeurs actuelles), \"factory\" (réinitialise aux valeurs par défaut documentées) ou \"configuration\" (revient aux valeurs par défaut de la configuration de l'interrupteur). ⚙️"
+        },
+        "sunset_time": {
+          "description": "Définir une heure fixe (HH:MM:SS) pour le coucher du soleil. 🌇"
+        },
+        "min_sunset_time": {
+          "description": "Définir l'heure virtuelle de coucher du soleil la plus précoce (HH:MM:SS), permettant des couchers de soleil tardifs. 🌇"
+        },
+        "max_sunrise_time": {
+          "description": "Définir l'heure virtuelle du lever du soleil la plus tardive (HH:MM:SS), permettant des levers de soleil plus tôt. 🌅"
+        },
+        "min_color_temp": {
+          "description": "Température de couleur la plus chaude en Kelvin. 🔥"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Utilisez soit \"rgb_color\" soit \"color_temp\" en mode nuit. 🌙"
+        },
+        "turn_on_lights": {
+          "description": "Indique s'il faut allumer les lumières qui sont actuellement éteintes. 🔆"
+        },
+        "include_config_in_attributes": {
+          "description": "Afficher toutes les options en tant qu'attributs sur l'interrupteur dans Home Assistant lorsqu'il est défini sur \"true\". 📝"
+        },
+        "sleep_rgb_color": {
+          "description": "Couleur RGB en mode nuit (utilisée lorsque `sleep_rgb_or_color_temp` est `rgb_color`). 🌈"
+        },
+        "adapt_delay": {
+          "description": "Temps d'attente (en secondes) entre l'allumage de la lumière et l'application des changements par l'Éclairage Adaptatif. Peut aider à éviter les scintillements. ⏲️"
+        },
+        "separate_turn_on_commands": {
+          "description": "Utilisez des appels distincts à \"light.turn_on\" pour la couleur et la luminosité, nécessaire pour certains types de lumières. 🔀"
+        },
+        "prefer_rgb_color": {
+          "description": "Indique s'il faut privilégier l'ajustement de la couleur RGB plutôt que la température de couleur de la lumière lorsque c'est possible. 🌈"
+        }
+      },
+      "description": "Changez les réglages que vous souhaitez dans le commutateur. Toutes les options ici sont les mêmes que dans le flow de configuration."
+    },
+    "apply": {
+      "description": "Applique les réglages d'éclairage adaptatif actuels aux lumières.",
+      "fields": {
+        "lights": {
+          "description": "Une lumière (ou une liste de lumières) à laquelle appliquer les réglages."
+        },
+        "transition": {
+          "description": "Durée de la transition des changements lumineux, en secondes. 🕑"
+        },
+        "entity_id": {
+          "description": "L'`entity_id` de l'interrupteur avec les paramètres à appliquer. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Indique s'il faut adapter la luminosité de la lumière. 🌞"
+        },
+        "turn_on_lights": {
+          "description": "Indique s'il faut allumer les lumières qui sont actuellement éteintes. 🔆"
+        },
+        "adapt_color": {
+          "description": "Indique s'il faut adapter la couleur sur les lumières compatibles. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Indique s'il faut privilégier l'ajustement de la couleur RGB plutôt que la température de couleur de la lumière lorsque c'est possible. 🌈"
+        }
+      }
+    },
+    "set_manual_control": {
+      "fields": {
+        "lights": {
+          "description": "entity_id(s) des lumières, si non spécifié, toutes les lumières de l'interrupteur sont sélectionnées. 💡"
+        },
+        "manual_control": {
+          "description": "Indique s'il faut ajouter (\"true\") ou retirer (\"false\") la lumière de la liste \"manual_control\". 🔒"
+        },
+        "entity_id": {
+          "description": "L'\"entity_id\" de l'interrupteur dans lequel (dé)marquer la lumière comme étant \"manuellement contrôlée\". 📝"
+        }
+      },
+      "description": "Indiquer si une lumière est \"contrôlée manuellement\"."
     }
   }
 }

custom_components/adaptive_lighting/translations/gl.json

@@ -0,0 +1,53 @@
+{
+  "options": {
+    "step": {
+      "init": {
+        "data_description": {
+          "interval": "Frecuencia para adaptar as luces, en segundos. 🔄",
+          "sleep_brightness": "Porcentaxe de brillo das luces en modo durmir. 😴"
+        },
+        "title": "Configuración de Iluminación Adaptativa",
+        "sections": {
+          "advanced": {
+            "data": {},
+            "data_description": {
+              "sunrise_offset": "Axusta a hora do amencer cun desfasamento positivo ou negativo en segundos. ⏰",
+              "sunset_offset": "Axusta a hora da posta de sol cun desfasamento positivo ou negativo en segundos. ⏰",
+              "send_split_delay": "Retraso (ms) entre `separate_turn_on_commands`"
+            }
+          }
+        },
+        "data": {}
+      }
+    }
+  },
+  "title": "Iluminación Adaptativa",
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sleep_brightness": {
+          "description": "Porcentaxe de brillo das luces en modo durmir. 😴"
+        },
+        "only_once": {
+          "description": "Adaptar luces só cando estean acesas (`true`) ou mantelas adaptándose (`false`). 🔄"
+        },
+        "sunrise_offset": {
+          "description": "Axusta a hora do amencer cun desfasamento positivo ou negativo en segundos. ⏰"
+        },
+        "sunset_offset": {
+          "description": "Axusta a hora da posta de sol cun desfasamento positivo ou negativo en segundos. ⏰"
+        },
+        "transition": {
+          "description": "Duración da transición cando as luces cambian, en segundos. 🕑"
+        }
+      }
+    }
+  },
+  "config": {
+    "step": {
+      "user": {
+        "title": "Escolle un nome para a instancia de Iluminación Dinámica"
+      }
+    }
+  }
+}

custom_components/adaptive_lighting/translations/hr.json

@@ -0,0 +1,38 @@
+{
+  "options": {
+    "step": {
+      "init": {
+        "title": "Opcije prilagodljivog osvjetljenja",
+        "data_description": {},
+        "data": {},
+        "sections": {
+          "advanced": {
+            "data": {
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Prilikom početnog paljenja svjetla. Ako je postavljeno na \"true\", AL se prilagođava samo ako se \"light.turn_on\" pozove bez navođenja boje ili svjetline. ❌🌈 Ovo npr. sprječava prilagodbu prilikom aktiviranja scene. Ako je \"false\", AL se prilagođava bez obzira na prisutnost boje ili svjetline u početnim \"service_data\". Potrebno je omogućiti `take_over_control`. 🕵️ "
+            },
+            "data_description": {
+              "sunrise_offset": "Podesite vrijeme izlaska sunca s pozitivnim ili negativnim pomakom u sekundama. ⏰",
+              "sunset_offset": "Podesite vrijeme izlaska sunca s pozitivnim ili negativnim pomakom u sekundama. ⏰"
+            }
+          }
+        }
+      }
+    }
+  },
+  "title": "prilagodi svjetlinu",
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "only_once": {
+          "description": "Prilagodi svjetla samo kada su uključena (true) ili ih neprestano prilagođavaj (false). 🔄"
+        },
+        "sunrise_offset": {
+          "description": "Podesite vrijeme izlaska sunca s pozitivnim ili negativnim pomakom u sekundama. ⏰"
+        },
+        "sunset_offset": {
+          "description": "Podesite vrijeme izlaska sunca s pozitivnim ili negativnim pomakom u sekundama. ⏰"
+        }
+      }
+    }
+  }
+}

custom_components/adaptive_lighting/translations/hu.json

@@ -0,0 +1,210 @@
+{
+  "options": {
+    "step": {
+      "init": {
+        "data_description": {
+          "interval": "Gyakoriság a lights illesztéséhez, másodpercekben. 🔄",
+          "transition": "Az transition időtartama, amikor a lights változnak, másodpercben. 🕑",
+          "sleep_brightness": "Az alvó üzemmódban lévő lights fényerejének százalékos értéke. 😴",
+          "sleep_color_temp": "Színhőmérséklet alvó üzemmódban (amikor a `sleep_rgb_or_color_temp` értéke `color_temp`) Kelvinben megadva. 😴"
+        },
+        "data": {
+          "lights": "lights: Az entity_id-k listája, amelyeket az AL vezéreljen (üresen is maradhat).🌟",
+          "min_brightness": "min_brightness: Minimális fényerő százalékban. 💡",
+          "max_brightness": "max_brightness: Maximális fényerő százalékban megadva. 💡",
+          "min_color_temp": "min_color_temp: A legmelegebb színhőmérséklet Kelvinben. 🔥",
+          "max_color_temp": "max_color_temp: A leghidegebb színhőmérséklet kelvinben. ❄️"
+        },
+        "title": "Adaptív világítás beállításai",
+        "description": "Egy Adaptív világítás komponens konfigurálása. Az opciók nevei a YAML-beállításokhoz igazodnak. Ha ezt a bejegyzést YAML-ben definiálta, itt nem jelennek meg beállítások. A paraméterek hatásait bemutató interaktív grafikonokért látogasson el [erre a webes alkalmazásra]({webapp_url}). További részletekért olvasd el a [hivatalos dokumentációt]({docs_url}).",
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "prefer_rgb_color: Lehetőség szerint az RGB színbeállítás előnyben részesítése a fény színhőmérsékletével szemben. 🌈",
+              "transition_until_sleep": "transition_until_sleep: Ha engedélyezve van, az Adaptív világítás az alvó mód beállításokat minimálisnak tekinti, és napnyugta után ezekre az értékekre vált át. 🌙",
+              "take_over_control": "take_over_control: Adaptív világítás kikapcsolása, amennyiben más forrásból érkező `Világítás: Bekapcsolás` szolgáltatás hívás történik, miközben a fények be vannak kapcsolva és illesztve vannak. Vegye figyelembe, hogy ez minden `interval`-ban meghívja a `homeassistant.update_entity`-t! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: `Világítás: Bekapcsolás`- szolgáltatás meghívástól eltérő állapotváltozások esetén észleli és leállítja az illesztéseket. A `take_over_control` beállítás engedélyezése szükséges. 🕵️ Vigyázat: ⚠️ Egyes lights tévesen jelezhetik a \"bekapcsolt\" állapotot, ami váratlanul bekapcsolódó lámpákhoz vezethet. Ha ilyen problémákat tapasztal, tiltsa le ezt a funkciót.",
+              "only_once": "only_once:  lights illesztése kizárólag, amikor azok be vannak kapcsolva (`igaz`) vagy tartsa folyamatosan illesztve őket (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Kizárólag a bekapcsoláskor érvényes. A beállítást \"igaz\"-ra állítva, az AL csak akkor végzi az illesztést, amennyiben a \"Világítás: Bekapcsolás\" szolgáltatás meghívása a szín és fényerő paraméterek megadása nélkül történik.❌🌈 Ez pl. alkalmas az illesztés felfüggesztésére egy jelenet aktiválásakor. \"Hamis\" beállítás esetén az AL elvégzi a kezdeti illesztést a szín és fényerő paraméterek meghívásától függetlenül. A használatához engedélyezve kell lennie a \"take_over_control\" beállításnak. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands:  Elkülönített `Világítás: Bekapcsolás` hívásokat használ a szín és a fényerő beállításához, ami néhány világítás típusnál szükséges. 🔀",
+              "skip_redundant_commands": "skip_redundant_commands: Az olyan adaptációs parancsok küldésének kihagyása, amelyek célállapota már megegyezik a fény ismert állapotával. Minimalizálja a hálózati forgalmat, és bizonyos helyzetekben javítja az adaptációs reakciókészséget. 📉Kapcsolja ki, ha a fizikai fényállapotok nem szinkronizálódnak a HA rögzített állapotával.",
+              "intercept": "elfogás: `Világítás: Bekapcsolás` szolgáltatás hívások elfogása és adaptálása a színek és a fényerő azonnali illesztésének lehetővé tétele érdekében. 🏎️ Letiltja az olyan lights esetében, amelyek nem támogatják a `Világítás: Bekapcsolás` szolgáltatás színnel és fényerővel történő szín- és fényerőszabályozását.",
+              "multi_light_intercept": "multi_light_intercept: `Világítás: Bekapcsolás` szolgáltatás hívások elfogása és adaptálása, amelyek több fényt céloznak meg. ➗⚠️ Ez azt eredményezheti, hogy egyetlen `Világítás: Bekapcsolás` szolgáltatás hívás több hívásra oszlik fel, pl. ha a lights különböző kapcsolókban vannak. Az `elfogás` engedélyezése szükséges.",
+              "include_config_in_attributes": "include_config_in_attributes: A kapcsoló összes opciójának attribútumként való megjelenítése a Home Assistantben, ha a beállítás értéke `igaz`. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Az első transition időtartama, amikor a lights \"kikapcsolt\" állapotból \"bekapcsolt\" állapotba váltanak, másodpercben. ⏲️",
+              "sleep_rgb_or_color_temp": "Az `\"rgb_color\" vagy a `\"color_temp\" használata alvó üzemmódban. 🌙",
+              "sleep_rgb_color": "RGB szín alvó üzemmódban (akkor érvényes, ha a `sleep_rgb_or_color_temp` értéke \"rgb_color\"). 🌈",
+              "sleep_transition": "Az transition időtartama az \"alvó üzemmód\" kapcsolásakor másodpercben. 😴",
+              "sunrise_time": "Állítson be egy fix időpontot (HH:MM:SS) a napfelkeltéhez. 🌅",
+              "min_sunrise_time": "Állítsa be a legkorábbi virtuális napfelkelte időpontját (HH:MM:SS), lehetővé téve a későbbi napfelkeltét. 🌅",
+              "max_sunrise_time": "A legkésőbbi virtuális napfelkelte időpontjának beállítása (HH:MM:SS), amely lehetővé teszi a korábbi napfelkeltét. 🌅",
+              "sunrise_offset": "A napfelkelte idejének beállítása pozitív vagy negatív eltolással másodpercekben. ⏰",
+              "sunset_time": "Állítson be egy fix időpontot (HH:MM:SS) a naplementéhez. 🌇",
+              "min_sunset_time": "Állítsa be a legkorábbi virtuális naplemente időpontját (HH:MM:SS), lehetővé téve a későbbi naplementéket. 🌇",
+              "max_sunset_time": "A legkésőbbi virtuális napnyugta időpontjának beállítása (HH:MM:SS), amely lehetővé teszi a korábbi naplementéket. 🌇",
+              "sunset_offset": "A naplemente idejének beállítása pozitív vagy negatív eltolással másodpercekben. ⏰",
+              "brightness_mode": "Használandó fényerő üzemmód. A lehetséges értékek: `default`, `linear` és `tanh` (a `brightness_mode_time_dark` és `brightness_mode_time_light` értékeket használja). 📈",
+              "brightness_mode_time_dark": "(Figyelmen kívül hagyva, ha `brightness_mode='default'`) A fényerő növelésének/csökkentésének időtartama másodpercben napfelkelte/napnyugta után/előtt. 📈📉.",
+              "brightness_mode_time_light": "(Figyelmen kívül hagyva, ha `brightness_mode='default'`) A fényerő növelésének/csökkentésének időtartama másodpercben napfelkelte/napnyugta után/előtt. 📈📉.",
+              "autoreset_control_seconds": "Automatikusan visszaállítja a kézi vezérlést néhány másodperc után. A letiltáshoz állítsa 0-ra. ⏲️",
+              "send_split_delay": "Késleltetés (ms-ban) a `separate_turn_on_commands` (különálló_bekapcsolási_parancsok) között olyan lights esetében, amelyek nem támogatják a fényerő és a szín egyidejű beállítását. ⏲️",
+              "adapt_delay": "Várakozási idő (másodpercben) a világítás bekapcsolása és az Adaptív világítás alkalmazása között. Segíthet elkerülni a villódzást. ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "Érvénytelen beállítás",
+      "entity_missing": "Egy vagy több kiválasztott világítás entitás hiányzik a Home Assistantból"
+    }
+  },
+  "title": "Adaptív világítás",
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "entity_id": {
+          "description": "A kapcsoló entitásazonosítója. 📝"
+        },
+        "max_brightness": {
+          "description": "Maximális fényerő százalékban megadva. 💡"
+        },
+        "max_color_temp": {
+          "description": "Leghidegebb színhőmérséklet Kelvinben megadva. ❄️"
+        },
+        "sleep_brightness": {
+          "description": "Az alvó üzemmódban lévő lights fényerejének százalékos értéke. 😴"
+        },
+        "detect_non_ha_changes": {
+          "description": "`Világítás: Bekapcsolás`- szolgáltatás meghívástól eltérő állapotváltozások esetén észleli és leállítja az illesztéseket. A `take_over_control` beállítás engedélyezése szükséges. 🕵️ Vigyázat: ⚠️ Egyes lights tévesen jelezhetik a \"bekapcsolt\" állapotot, ami váratlanul bekapcsolódó lámpákhoz vezethet. Ha ilyen problémákat tapasztal, tiltsa le ezt a funkciót."
+        },
+        "sunrise_offset": {
+          "description": "A napfelkelte idejének beállítása pozitív vagy negatív eltolással másodpercekben. ⏰"
+        },
+        "max_sunrise_time": {
+          "description": "A legkésőbbi virtuális napfelkelte időpontjának beállítása (HH:MM:SS), amely lehetővé teszi a korábbi napfelkeltét. 🌅"
+        },
+        "sleep_color_temp": {
+          "description": "Színhőmérséklet alvó üzemmódban (akkor használatos, ha a `sleep_rgb_or_color_temp` a `color_temp`-re van állítva) kelvinben. 😴"
+        },
+        "min_brightness": {
+          "description": "Minimális fényerő százalékban. 💡"
+        },
+        "min_color_temp": {
+          "description": "A legmelegebb színhőmérséklet Kelvinben. 🔥"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Az `\"rgb_color\" vagy a `\"color_temp\" használata alvó üzemmódban. 🌙"
+        },
+        "turn_on_lights": {
+          "description": "A jelenleg kikapcsolt fények bekapcsolása. 🔆"
+        },
+        "initial_transition": {
+          "description": "Az első transition időtartama, amikor a lights \"kikapcsolt\" állapotból \"bekapcsolt\" állapotba váltanak, másodpercben. ⏲️"
+        },
+        "sunrise_time": {
+          "description": "Állítson be egy fix időpontot (HH:MM:SS) a napfelkeltéhez. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "Az összes beállítás megjelenítése a kapcsoló attribútumaként a Home Assistantban, ha a beállítás `igaz`. 📝"
+        },
+        "sleep_rgb_color": {
+          "description": "RGB szín alvó üzemmódban (akkor érvényes, ha a `sleep_rgb_or_color_temp` értéke \"rgb_color\"). 🌈"
+        },
+        "take_over_control": {
+          "description": "Az Adaptív világítás letiltása, ha egy másik forrásból érkező `Világítás: Bekapcsolás` hívja, miközben a világítás be van kapcsolva és AL által illesztve van. Vegye figyelembe, hogy ez minden \"interval\"-ban meghívja a `homeassistant.update_entity`-t! 🔒"
+        },
+        "sleep_transition": {
+          "description": "Az transition időtartama az \"alvó üzemmód\" kapcsolásakor másodpercben. 😴"
+        },
+        "autoreset_control_seconds": {
+          "description": "Automatikusan visszaállítja a kézi vezérlést néhány másodperc után. A letiltáshoz állítsa 0-ra. ⏲️"
+        },
+        "adapt_delay": {
+          "description": "Várakozási idő (másodpercben) a világítás bekapcsolása és az Adaptív világítás alkalmazása között. Segíthet elkerülni a villódzást. ⏲️"
+        },
+        "only_once": {
+          "description": "A lights illesztése csak a bekapcsoláskor egy alkalommal (\"igaz\") vagy folyamatosan történjen a bekapcsolás után is (\"hamis\")."
+        },
+        "use_defaults": {
+          "description": "Beállítja az ebben a szolgáltatáshívásban meg nem adott alapértelmezett értékeket. Opciók: \"(alapértelmezett, megtartja az aktuális értékeket), \"gyári\" (visszaállítja a dokumentált alapértelmezett értékeket) vagy \"konfiguráció\" (visszaállítja a kapcsoló konfigurációjának alapértelmezett értékeit). ⚙️"
+        },
+        "separate_turn_on_commands": {
+          "description": "Elkülönített `Világítás: Bekapcsolás` szolgáltatás hívások használata a szín és a fényerő számára, ami néhány világítás típusnál szükséges. 🔀"
+        },
+        "prefer_rgb_color": {
+          "description": "Lehetőség szerint az RGB színbeállítás előnyben részesítése a fény színhőmérsékletével szemben. 🌈"
+        },
+        "sunset_offset": {
+          "description": "A naplemente idejének beállítása pozitív vagy negatív eltolással másodpercekben. ⏰"
+        },
+        "send_split_delay": {
+          "description": "Késleltetés (ms-ban) a `separate_turn_on_commands` (különálló_bekapcsolási_parancsok) között olyan lights esetében, amelyek nem támogatják a fényerő és a szín egyidejű beállítását. ⏲️"
+        },
+        "sunset_time": {
+          "description": "Állítson be egy fix időpontot (HH:MM:SS) a naplementéhez. 🌇"
+        },
+        "transition": {
+          "description": "Az transition időtartama, amikor a lights változnak, másodpercben. 🕑"
+        },
+        "min_sunset_time": {
+          "description": "Állítsa be a legkorábbi virtuális naplemente időpontját (HH:MM:SS), lehetővé téve a későbbi naplementéket. 🌇"
+        }
+      },
+      "description": "Módosítsa a kapcsolóban a kívánt beállításokat. Itt minden beállítás ugyanaz, mint a konfigurációs folyamban."
+    },
+    "set_manual_control": {
+      "description": "Jelölje meg, hogy egy lámpa „kézi vezérlésű”-e.",
+      "fields": {
+        "manual_control": {
+          "description": "A világítás hozzáadása (\"true\") vagy eltávolítása (\"false\") a \"manual_control\" listából. 🔒"
+        },
+        "entity_id": {
+          "description": "A kapcsoló `entity_id`-je, amelyben a lámpát \"kézi vezérlésűnek\" kell jelölni. 📝"
+        },
+        "lights": {
+          "description": "a lights entity_id-je(i), ha nincs megadva, a kapcsoló összes lights ki lesz választva. 💡"
+        }
+      }
+    },
+    "apply": {
+      "fields": {
+        "entity_id": {
+          "description": "Az alkalmazandó beállításokat tartalmazó kapcsoló `entity_id`-je. 📝"
+        },
+        "adapt_brightness": {
+          "description": "A világítás fényerejének beállítása. 🌞"
+        },
+        "turn_on_lights": {
+          "description": "A jelenleg kikapcsolt lights bekapcsolása. 🔆"
+        },
+        "adapt_color": {
+          "description": "A lights által támogatott színek beállítása. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Lehetőség szerint az RGB színbeállítás előnyben részesítése a fény színhőmérsékletével szemben. 🌈"
+        },
+        "lights": {
+          "description": "A világítás (vagy a világítások listája), amelyre a beállításokat alkalmazni kell.💡"
+        },
+        "transition": {
+          "description": "Az transition időtartama, amikor a lights változnak, másodpercben. 🕑"
+        }
+      },
+      "description": "Az aktuális Adaptív világítás beállításokat alkalmazza a lights-ra."
+    }
+  },
+  "config": {
+    "step": {
+      "user": {
+        "title": "Válasszon nevet az Adaptív világítás példánynak",
+        "description": "Minden integrációs tétel több lights-t is tartalmazhat!"
+      }
+    },
+    "abort": {
+      "already_configured": "Ez az eszköz már be van állítva"
+    }
+  }
+}

custom_components/adaptive_lighting/translations/id.json

@@ -0,0 +1,210 @@
+{
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sleep_brightness": {
+          "description": "Persentase kecerahan lampu dalam mode tidur. 😴"
+        },
+        "detect_non_ha_changes": {
+          "description": "Mendeteksi dan menghentikan adaptasi untuk perubahan status non-`light.turn_on`. Perlu mengaktifkan `take_over_control`. 🕵️ Perhatian: ⚠️ Beberapa lampu mungkin salah menunjukkan status 'hidup' yang dapat mengakibatkan lampu menyala secara tidak terduga. Nonaktifkan fitur ini jika Anda mengalami masalah seperti itu."
+        },
+        "sunrise_offset": {
+          "description": "Sesuaikan waktu matahari terbit dengan offset positif atau negatif dalam hitungan detik. ⏰"
+        },
+        "max_sunrise_time": {
+          "description": "Atur waktu matahari terbit virtual terkini (HH:MM:SS), memungkinkan matahari terbit lebih cepat. 🌅"
+        },
+        "sleep_color_temp": {
+          "description": "Suhu warna dalam mode tidur (digunakan ketika `sleep_rgb_or_color_temp` adalah `color_temp`) dalam Kelvin. 😴"
+        },
+        "min_brightness": {
+          "description": "Persentase kecerahan minimum. 💡"
+        },
+        "min_color_temp": {
+          "description": "Suhu warna terhangat dalam Kelvin. 🔥"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Gunakan `\"rgb_color\"` atau `\"color_temp\"` dalam mode tidur. 🌙"
+        },
+        "turn_on_lights": {
+          "description": "Kalau ingin menyalakan lampu yang sedang mati. 🔆"
+        },
+        "initial_transition": {
+          "description": "Durasi transisi pertama saat lampu berubah dari `mati` ke `hidup` dalam hitungan detik. ⏲️"
+        },
+        "entity_id": {
+          "description": "ID Entitas sakelar. 📝"
+        },
+        "sunrise_time": {
+          "description": "Tetapkan waktu tetap (HH:MM:SS) untuk matahari terbit. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "Tampilkan semua opsi sebagai atribut pada sakelar di Home Assistant ketika diatur ke `true`. 📝"
+        },
+        "max_brightness": {
+          "description": "Persentase kecerahan maksimum. 💡"
+        },
+        "sleep_rgb_color": {
+          "description": "Warna RGB dalam mode tidur (digunakan ketika `sleep_rgb_or_color_temp` adalah \"rgb_color\"). 🌈"
+        },
+        "take_over_control": {
+          "description": "Nonaktifkan Pencahayaan Adaptif jika sumber lain memanggil `light.turn_on` saat lampu menyala dan sedang diadaptasi. Perhatikan bahwa ini memanggil `homeassistant.update_entity` setiap `interval`! 🔒"
+        },
+        "sleep_transition": {
+          "description": "Durasi transisi ketika \"mode tidur\" diubah, dalam hitungan detik. 😴"
+        },
+        "autoreset_control_seconds": {
+          "description": "Secara otomatis mengatur ulang kontrol manual setelah beberapa detik. Setel ke 0 untuk menonaktifkan. ⏲️"
+        },
+        "adapt_delay": {
+          "description": "Waktu tunggu (detik) antara lampu menyala dan penerapan ubahan Pencahayaan Adaptif. Mungkin membantu untuk menghindari kedipan. ⏲️"
+        },
+        "only_once": {
+          "description": "Sesuaikan lampu hanya saat menyala (`true`) atau terus sesuaikan (`false`). 🔄"
+        },
+        "use_defaults": {
+          "description": "Menetapkan nilai bawaan yang tidak ditentukan dalam panggilan layanan ini. Opsi: \"current\" (bawaan, mempertahankan nilai saat ini), \"factory\" (direset ke nilai bawaan yang terdokumentasi), atau \"configuration\" (kembali ke nilai bawaan konfigurasi sakelar). ⚙️"
+        },
+        "separate_turn_on_commands": {
+          "description": "Gunakan panggilan `light.turn_on` terpisah untuk warna dan kecerahan, diperlukan untuk beberapa jenis lampu. 🔀"
+        },
+        "prefer_rgb_color": {
+          "description": "Kalau lebih memilih penyesuaian warna RGB dibandingkan suhu warna terang jika memungkinkan. 🌈"
+        },
+        "max_color_temp": {
+          "description": "Suhu warna terdingin dalam Kelvin. ❄️"
+        },
+        "sunset_offset": {
+          "description": "Sesuaikan waktu matahari terbenam dengan offset positif atau negatif dalam hitungan detik. ⏰"
+        },
+        "send_split_delay": {
+          "description": "Waktu tunda (ms) antara `separate_turn_on_commands` untuk lampu yang tidak mendukung pengaturan kecerahan dan warna secara bersamaan. ⏲️"
+        },
+        "sunset_time": {
+          "description": "Tetapkan waktu tetap (HH:MM:SS) untuk matahari terbenam. 🌇"
+        },
+        "transition": {
+          "description": "Durasi transisi saat lampu berganti, dalam hitungan detik. 🕑"
+        },
+        "min_sunset_time": {
+          "description": "Tetapkan waktu matahari terbenam virtual paling awal (HH:MM:SS), memungkinkan matahari terbenam di kemudian waktu. 🌇"
+        }
+      },
+      "description": "Ubah pengaturan apa pun yang Anda inginkan di sakelar. Semua opsi di sini sama seperti pada alur konfigurasi."
+    },
+    "apply": {
+      "fields": {
+        "entity_id": {
+          "description": "`eEntity_id` sakelar dengan pengaturan yang akan diterapkan. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Kalau ingin menyesuaikan kecerahan lampu. 🌞"
+        },
+        "turn_on_lights": {
+          "description": "Kalau ingin menyalakan lampu yang sedang mati. 🔆"
+        },
+        "adapt_color": {
+          "description": "Kalau ingin menyesuaikan warna pada lampu pendukung. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Kalau lebih memilih penyesuaian warna RGB dibandingkan suhu warna terang jika memungkinkan. 🌈"
+        },
+        "lights": {
+          "description": "Lampu (atau daftar lampu) untuk menerapkan pengaturan. 💡"
+        },
+        "transition": {
+          "description": "Durasi transisi saat lampu berganti, dalam hitungan detik. 🕑"
+        }
+      },
+      "description": "Menerapkan pengaturan Pencahayaan Adaptif saat ini ke lampu."
+    },
+    "set_manual_control": {
+      "fields": {
+        "manual_control": {
+          "description": "Kalau ingin menambahkan (\"true\") atau menghapus (\"false\") lampu dari daftar \"manual_control\". 🔒"
+        },
+        "entity_id": {
+          "description": "`entity_id` dari sakelar yang digunakan untuk membatalkan penandaan lampu sebagai `manually controlled`. 📝"
+        },
+        "lights": {
+          "description": "entity_id(s) lampu, jika tidak ditentukan, semua lampu di sakelar dipilih. 💡"
+        }
+      },
+      "description": "Tandai kalau lampu 'dikontrol secara manual'."
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "data_description": {
+          "interval": "Frekuensi untuk menyesuaikan lampu, dalam hitungan detik. 🔄",
+          "transition": "Durasi transisi saat lampu berganti, dalam hitungan detik. 🕑",
+          "sleep_brightness": "Persentase kecerahan lampu dalam mode tidur. 😴",
+          "sleep_color_temp": "Suhu warna dalam mode tidur (digunakan ketika `sleep_rgb_or_color_temp` adalah `color_temp`) dalam Kelvin. 😴"
+        },
+        "data": {
+          "lights": "lights: Daftar entity_ids  lampu yang akan dikontrol (boleh kosong). 🌟",
+          "min_brightness": "min_brightness: Persentase kecerahan minimum. 💡",
+          "max_brightness": "max_brightness: Persentase kecerahan maksimum. 💡",
+          "min_color_temp": "min_color_temp: Suhu warna terhangat dalam Kelvin. 🔥",
+          "max_color_temp": "max_color_temp: Suhu warna terdingin dalam Kelvin. ❄️"
+        },
+        "title": "Opsi Pencahayaan Adaptif",
+        "description": "Konfigurasikan komponen Pencahayaan Adaptif. Nama opsi selaras dengan pengaturan YAML. Jika Anda telah menentukan entri ini di YAML, tidak ada opsi yang akan muncul di sini. Untuk grafik interaktif yang menunjukkan efek parameter, kunjungi [aplikasi web ini]({webapp_url}). Untuk detail lebih lanjut, lihat [dokumentasi resmi]({docs_url}).",
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "prefer_rgb_color: Kalau lebih memilih penyesuaian warna RGB dibandingkan suhu warna terang jika memungkinkan. 🌈",
+              "transition_until_sleep": "transition_until_sleep: Jika diaktifkan, Pencahayaan Adaptif akan menganggap pengaturan tidur sebagai minimum, dan beralih ke nilai ini setelah matahari terbenam. 🌙",
+              "take_over_control": "take_over_control: Nonaktifkan Pencahayaan Adaptif jika sumber lain memanggil `light.turn_on` saat lampu menyala dan sedang diadaptasi. Perhatikan bahwa ini memanggil `homeassistant.update_entity` setiap `interval`! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: Mendeteksi dan menghentikan adaptasi untuk perubahan status non-`light.turn_on`. Perlu mengaktifkan `take_over_control`. 🕵️ Perhatian: ⚠️ Beberapa lampu mungkin salah menunjukkan status 'hidup' yang dapat mengakibatkan lampu menyala secara tidak terduga. Nonaktifkan fitur ini jika Anda mengalami masalah seperti itu.",
+              "only_once": "only_once: Sesuaikan lampu hanya saat menyala (`true`) atau terus sesuaikan (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Saat menyalakan lampu pada awalnya. Jika diatur ke `true`, AL hanya beradaptasi jika `light.turn_on` dipanggil tanpa menentukan warna atau kecerahan. ❌🌈 Misalnya, mencegah adaptasi ketika mengaktifkan scene. Jika `false`, AL akan beradaptasi tanpa menghiraukan keberadaan warna atau kecerahan dalam `service_data` awal. Perlu `take_over_control` diaktifkan. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Gunakan panggilan `light.turn_on` terpisah untuk warna dan kecerahan, diperlukan untuk beberapa jenis lampu. 🔀",
+              "skip_redundant_commands": "skip_redundant_commands: Lewati pengiriman perintah adaptasi yang status targetnya sudah sama dengan status cahaya yang diketahui. Meminimalkan lalu lintas jaringan dan meningkatkan respons adaptasi dalam beberapa situasi. 📉Nonaktifkan jika status cahaya fisik tidak sinkron dengan status rekaman HA.",
+              "intercept": "intercept: Cegat dan sesuaikan panggilan `light.turn_on` untuk mengaktifkan adaptasi warna dan kecerahan seketika. 🏎️ Nonaktifkan untuk lampu yang tidak mendukung `light.turn_on` dengan warna dan kecerahan.",
+              "multi_light_intercept": "multi_light_intercept: Cegat dan sesuaikan panggilan `light.turn_on` yang menargetkan banyak lampu. ➗⚠️ Hal ini dapat mengakibatkan satu panggilan `light.turn_on` terpecah menjadi beberapa panggilan, misalnya saat lampu berada di sakelar yang berbeda. Membutuhkan `intercept` untuk diaktifkan.",
+              "include_config_in_attributes": "include_config_in_attributes: Tampilkan semua opsi sebagai atribut pada sakelar di Home Assistant ketika diatur ke `true`. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Durasi transisi pertama saat lampu berubah dari `mati` ke `hidup` dalam hitungan detik. ⏲️",
+              "sleep_rgb_or_color_temp": "Gunakan `\"rgb_color\"` atau `\"color_temp\"` dalam mode tidur. 🌙",
+              "sleep_rgb_color": "Warna RGB dalam mode tidur (digunakan ketika `sleep_rgb_or_color_temp` adalah \"rgb_color\"). 🌈",
+              "sleep_transition": "Durasi transisi ketika \"mode tidur\" diubah, dalam hitungan detik. 😴",
+              "sunrise_time": "Tetapkan waktu tetap (HH:MM:SS) untuk matahari terbit. 🌅",
+              "min_sunrise_time": "Tetapkan waktu matahari terbit virtual paling awal (HH:MM:SS), memungkinkan matahari terbit di kemudian waktu. 🌅",
+              "max_sunrise_time": "Atur waktu matahari terbit virtual terkini (HH:MM:SS), memungkinkan matahari terbit lebih cepat. 🌅",
+              "sunrise_offset": "Sesuaikan waktu matahari terbit dengan offset positif atau negatif dalam hitungan detik. ⏰",
+              "sunset_time": "Tetapkan waktu tetap (HH:MM:SS) untuk matahari terbenam. 🌇",
+              "min_sunset_time": "Tetapkan waktu matahari terbenam virtual paling awal (HH:MM:SS), memungkinkan matahari terbenam di kemudian waktu. 🌇",
+              "max_sunset_time": "Atur waktu matahari terbenam virtual terkini (HH:MM:SS), memungkinkan matahari terbenam lebih cepat. 🌇",
+              "sunset_offset": "Sesuaikan waktu matahari terbenam dengan offset positif atau negatif dalam hitungan detik. ⏰",
+              "brightness_mode": "Mode kecerahan untuk digunakan. Nilai yang memungkinkan adalah `default`, `linear`, dan `tanh` (menggunakan `brightness_mode_time_dark` dan `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(Diabaikan jika `brightness_mode='default'`) Durasi dalam hitungan detik untuk meningkatkan/menurunkan kecerahan sebelum/sesudah matahari terbit/terbenam. 📈📉",
+              "brightness_mode_time_light": "(Ignored if `brightness_mode='default'`) Durasi dalam hitungan detik untuk meningkatkan/menurunkan kecerahan setelah/sebelum matahari terbit/terbenam. 📈📉.",
+              "autoreset_control_seconds": "Secara otomatis mengatur ulang kontrol manual setelah beberapa detik. Setel ke 0 untuk menonaktifkan. ⏲️",
+              "send_split_delay": "Waktu tunda (ms) antara `separate_turn_on_commands` untuk lampu yang tidak mendukung pengaturan kecerahan dan warna secara bersamaan. ⏲️",
+              "adapt_delay": "Waktu tunggu (detik) antara lampu menyala dan penerapan ubahan Pencahayaan Adaptif. Mungkin membantu untuk menghindari kedipan. ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "Opsi tidak valid",
+      "entity_missing": "Satu atau lebih entitas cahaya yang dipilih hilang dari Home Assistant"
+    }
+  },
+  "title": "Pencahayaan Adaptif",
+  "config": {
+    "step": {
+      "user": {
+        "description": "Setiap instance dapat berisi banyak lampu!",
+        "title": "Pilih nama untuk instance Pencahayaan Adaptif"
+      }
+    },
+    "abort": {
+      "already_configured": "Perangkat ini sudah dikonfigurasi"
+    }
+  }
+}

custom_components/adaptive_lighting/translations/it.json

@@ -1,52 +1,224 @@
 {
-    "title": "Illuminazione Adattiva",
-    "config": {
-      "step": {
-        "user": {
-          "title": "Scegli un nome per l'istanza di Illuminazione Adattiva",
-          "description": "Scegli un nome per questa istanza. Puoi eseguire più istanze di Illuminazione adattiva, ognuna delle quali può contenere più luci!",
-          "data": {
-            "name": "Nome"
-          }
+  "title": "Illuminazione Adattiva",
+  "config": {
+    "step": {
+      "user": {
+        "title": "Scegli un nome per l'istanza di Illuminazione Adattiva",
+        "description": "Scegli un nome per questa istanza. Puoi eseguire più istanze di Illuminazione adattiva, ognuna delle quali può contenere più luci!",
+        "data": {
+          "name": "Nome"
         }
-      },
-      "abort": {
-        "already_configured": "Questo dispositivo è già stato configurato"
       }
     },
-    "options": {
-      "step": {
-        "init": {
-          "title": "Opzioni Illuminazione Adattiva",
-          "description": "Tutte le opzioni per il componente Illuminazione Adattiva. I nomi delle opzioni corrispondono con le impostazioni YAML. Non sono mostrate opzioni se hai la voce adaptive-lighting definita nella tua configurazione YAML.",
-          "data": {
-            "lights": "luci",
-            "initial_transition": "initial_transition: Quando le luci vengono accese (off -> on). (secondi)",
-            "sleep_transition": "sleep_transition: Quando 'sleep_state' cambia. (secondi)",
-            "interval": "interval: Tempo tra i cambiamenti dello switch. (secondi)",
-            "max_brightness": "max_brightness: Luminosità massima delle luci durante un ciclo. (%)",
-            "max_color_temp": "max_color_temp: Gradazione più fredda del ciclo di temperatura del colore. (Kelvin)",
-            "min_brightness": "min_brightness: Luminosità minima delle luci durante un ciclo. (%)",
-            "min_color_temp": "min_color_temp: Gradazione più calda del ciclo di temperatura del colore. (Kelvin)",
-            "only_once": "only_once: Adatta le luci solo quando vengono accese.",
-            "prefer_rgb_color": "prefer_rgb_color: Usa 'rgb_color' al posto di 'color_temp' quando possibile.",
-            "separate_turn_on_commands": "separate_turn_on_commands: Separa i comandi per ogni attributo (color, brightness, etc.) in 'light.turn_on' (richiesto per alcune luci).",
-            "sleep_brightness": "sleep_brightness: Impostazione della luminosità per la modalità notturna. (%)",
-            "sleep_color_temp": "sleep_color_temp: Impostazione della temperatura colore per la modalità notturna. (Kelvin)",
-            "sunrise_offset": "sunrise_offset: Imposta quanto anticipare(-) o ritardare(+) l'alba nel ciclo (+/- secondi)",
-            "sunrise_time": "sunrise_time: Imposta manualmente l'ora dell'alba, se 'None', usa l'ora effettiva dell'alba alla tua posizione (HH:MM:SS)",
-            "sunset_offset": "sunset_offset: Imposta quanto anticipare(-) o ritardare(+) il tramonto nel ciclo (+/- secondi)",
-            "sunset_time": "sunset_time: Imposta manualmente l'ora del tramonto, se 'None', usa l'ora effettiva del tramonto alla tua posizione (HH:MM:SS)",
-            "take_over_control": "take_over_control: Se viene chiamato il servizio 'lights.turn_on' (non da Illuminazione Adattiva) quando una luce è già accesa, interrompi l'adattamento della luce finquando essa o l'interruttore non vengono riaccesi (off -> on.)",
-            "detect_non_ha_changes": "detect_non_ha_changes: rileva tutti i cambiamenti >10% applicati alle luci (anche fuori da HA), richiede che 'take_over_control' sia abilitato (chiama 'homeassistant.update_entity' ad ogni 'intervallo'!)",
-            "transition": "Tempo di transizione quando viene applicata una modifica alle luci (secondi)",
-            "adapt_delay": "Tempo di attesa tra l'accensione della luce, e Illuminazione Adattiva che applica le modifiche allo stato della luce. Potrebbe evitare sfarfallii."
+    "abort": {
+      "already_configured": "Questo dispositivo è già stato configurato"
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "title": "Opzioni Illuminazione Adattiva",
+        "description": "Tutte le opzioni per il componente Illuminazione Adattiva. I nomi delle opzioni corrispondono con le impostazioni YAML. Non sono mostrate opzioni se hai la voce adaptive-lighting definita nella tua configurazione YAML.",
+        "data": {
+          "lights": "luci",
+          "interval": "interval: Tempo tra i cambiamenti dello switch. (secondi)",
+          "transition": "Tempo di transizione quando viene applicata una modifica alle luci (secondi)",
+          "min_brightness": "min_brightness: Luminosità minima delle luci durante un ciclo. (%)",
+          "max_brightness": "max_brightness: Luminosità massima delle luci durante un ciclo. (%)",
+          "min_color_temp": "min_color_temp: Gradazione più calda del ciclo di temperatura del colore. (Kelvin)",
+          "max_color_temp": "max_color_temp: Gradazione più fredda del ciclo di temperatura del colore. (Kelvin)",
+          "sleep_brightness": "sleep_brightness: Impostazione della luminosità per la modalità notturna. (%)",
+          "sleep_color_temp": "sleep_color_temp: Impostazione della temperatura colore per la modalità notturna. (Kelvin)"
+        },
+        "data_description": {
+          "interval": "Frequenza di adattamento delle luci, espressa in secondi. 🔄",
+          "transition": "Durata della transizione quando le luci cambiano, espressa in secondi. 🕑",
+          "sleep_brightness": "Luminosità percentuale delle luci in modalità notturna. 😴",
+          "sleep_color_temp": "Temperatura colore per la modalità notturna (utilizzata quando `sleep_rgb_or_color_temp` vale `color_temp`), espressa in Kelvin. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition: Quando le luci vengono accese (off -> on). (secondi)",
+              "prefer_rgb_color": "prefer_rgb_color: Usa 'rgb_color' al posto di 'color_temp' quando possibile.",
+              "sleep_transition": "sleep_transition: Quando 'sleep_state' cambia. (secondi)",
+              "transition_until_sleep": "transition_until_sleep: Quando abilitato, Adaptive Lighting tratterà le impostazioni di sleep come valori minimi, facendo la transizione a questi valori dopo il tramonto. 🌙",
+              "sunrise_time": "sunrise_time: Imposta manualmente l'ora dell'alba, se 'None', usa l'ora effettiva dell'alba alla tua posizione (HH:MM:SS)",
+              "sunrise_offset": "sunrise_offset: Imposta quanto anticipare(-) o ritardare(+) l'alba nel ciclo (+/- secondi)",
+              "sunset_time": "sunset_time: Imposta manualmente l'ora del tramonto, se 'None', usa l'ora effettiva del tramonto alla tua posizione (HH:MM:SS)",
+              "sunset_offset": "sunset_offset: Imposta quanto anticipare(-) o ritardare(+) il tramonto nel ciclo (+/- secondi)",
+              "take_over_control": "take_over_control: Se viene chiamato il servizio 'lights.turn_on' (non da Illuminazione Adattiva) quando una luce è già accesa, interrompi l'adattamento della luce finquando essa o l'interruttore non vengono riaccesi (off -> on.)",
+              "detect_non_ha_changes": "detect_non_ha_changes: rileva tutti i cambiamenti >10% applicati alle luci (anche fuori da HA), richiede che 'take_over_control' sia abilitato (chiama 'homeassistant.update_entity' ad ogni 'intervallo'!)",
+              "only_once": "only_once: Adatta le luci solo quando vengono accese.",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Quando accendi le luci la prima volta. Se impostato su `true`, AL adatta solo se `light.turn_on è invocato senza specificare il colore o la luminosità. ❌🌈 Questo, per esempio, previene l'adattamento quando si attiva una scena. Se `false`, AL adatta indipendentemente dalla presenza di colore o luminosità nei `service_data` iniziali. Necessita che `take_over_control` sia abilitato. 🕵️ ",
+              "separate_turn_on_commands": "separate_turn_on_commands: Separa i comandi per ogni attributo (color, brightness, etc.) in 'light.turn_on' (richiesto per alcune luci).",
+              "adapt_delay": "Tempo di attesa tra l'accensione della luce, e Illuminazione Adattiva che applica le modifiche allo stato della luce. Potrebbe evitare sfarfallii.",
+              "skip_redundant_commands": "skip_redundant_commands: Salta l'invio di comandi di adattamento rivolti ad entità in cui lo stato desiderato è identico allo stato attuale. Minimizza il traffico sulla rete e migliora la responsività dell'adattamento in alcune situazioni. 📉 Disabilitalo se lo stato reale delle luci va fuori sincrono con quello registrato da HA.",
+              "intercept": "intercept: Intercetta e adatta alle chiamate a`light.turn_on` per abilitare adattamenti istantanei di colore e luminosità. 🏎️ Disabilita per quelle luci che non supportano l'impostazione di luci e colori a seguito dell'evento `light.turn_on`.",
+              "multi_light_intercept": "multi_light_intercept: Intercetta e adatta le chiamate a `light.turn_on` destinate a più luci. ➗⚠️ Questo potrebbe causare la divisione della singola chiamata `light.turn_on`in più chiamate, ad esempio quando le luci sono su switch diversi. Richiede che l'opzione `intercept` sia abilitata.",
+              "include_config_in_attributes": "include_config_in_attributes: Quando impostato come `true`,   mostra tutte le opzioni come attributi dello switch in Home Assistant. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Durata della prima transizione quando le luci passano dallo stato `off` a `on`, espressa in secondi. ⏲️",
+              "sleep_rgb_or_color_temp": "Usa uno tra `\"rgb_color\"` or`\"color_temp\"` in modalità notturna. 🌙",
+              "sleep_rgb_color": "Colore RGB in modalità notturna (usato quando  `sleep_rgb_or_color_temp` è impostato su \"rgb_color\"). 🌈",
+              "sleep_transition": "Durata della transizione al passaggio da/verso la modalità luce notturna, espressa in secondi. 😴",
+              "sunrise_time": "Imposta un orario fisso (HH:MM:SS) per l'alba. 🌅",
+              "min_sunrise_time": "Imposta il minimo orario per l'alba (HH:MM:SS), per eventualmente ritardarla. 🌅",
+              "max_sunrise_time": "Imposta l'orario massimo per l'alba (HH:MM:SS), in modo da eventualmente anticiparla. 🌅",
+              "sunrise_offset": "Regola il momento dell'alba con un offset positivo o negativo. ⏰",
+              "sunset_time": "Imposta un orario fisso (HH:MM:SS) per  il tramonto. 🌇",
+              "min_sunset_time": "Imposta il minimo orario per il tramonto (HH:MM:SS), per eventualmente ritardarlo. 🌅",
+              "max_sunset_time": "Imposta il massimo orario per il tramonto (HH:MM:SS), in modo da eventualmente anticiparlo. 🌇",
+              "sunset_offset": "Modifica l'orario del tramonto con un offset in secondi positivo o negativo. ⏰",
+              "brightness_mode": "Modalità per la luminosità da utilizzare. I valori possibili sono `default`, `linear`, and `tanh` (usa`brightness_mode_time_dark` e `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "La durata, espressa in secondi, della variazione di luminosità durante le albe/tramonti (ignorato se `brightness_mode='default'`). 📈📉",
+              "brightness_mode_time_light": "La durata, espressa in secondi, della variazione di luminosità durante le albe/tramonti (ignorato se `brightness_mode='default'`). 📈📉",
+              "autoreset_control_seconds": "Rimuovi automaticamente  il colore impostato manualmente dopo un certo numero di secondi. Imposta  0 per disabilitare. ⏲️",
+              "send_split_delay": "Ritardo (ms) tra  i comandi,  per le luci che hanno `separate_turn_on_commands` e che non supportano l'impostazione simultanea di luminosità e  colore. ⏲️",
+              "adapt_delay": "Tempo di attesa (in secondi) tra l'accensione della luce e i cambiamenti indotti da Illuminazione Adattativa. Può contribuire a ridurre lo sfarfallio. ⏲️"
+            }
           }
         }
-      },
-      "error": {
-        "option_error": "Opzione non valida",
-        "entity_missing": "Non è stata trovata una luce selezionata"
       }
+    },
+    "error": {
+      "option_error": "Opzione non valida",
+      "entity_missing": "Non è stata trovata una luce selezionata"
+    }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "only_once": {
+          "description": "Adatta le luci solo nel momento in cui vengono accese ('true') o continua ad adattarle ('false'). 🔄"
+        },
+        "sunrise_offset": {
+          "description": "Modifica l'orario dell'alba con un offset in secondi positivo o negativo."
+        },
+        "sleep_brightness": {
+          "description": "Luminosità percentuale delle luci in modalità notturna. 😴"
+        },
+        "detect_non_ha_changes": {
+          "description": "Individua e arresta l'adattamento per i cambiamenti di stato diversi da `light.turn_on`. Richiede che `take_over_control` sia abilitato. 🕵️ Avvertenza: ⚠️ Alcune luci potrebbero riportare erroneamente lo stato di 'on', il che potrebbe causarne accensione inaspettata. Disabilita questa opzione se riscontri questa casistica."
+        },
+        "max_sunrise_time": {
+          "description": "Imposta l'orario massimo per l'alba (HH:MM:SS), in modo da eventualmente anticiparla. 🌅"
+        },
+        "sleep_color_temp": {
+          "description": "Temperatura colore per la modalità notturna (utilizzata quando `sleep_rgb_or_color_temp` vale `color_temp`), espressa in Kelvin. 😴"
+        },
+        "min_brightness": {
+          "description": "Minima luminosità, in percentuale.💡"
+        },
+        "min_color_temp": {
+          "description": "Temperatura colore più calda, espressa in Kelvin.🔥"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Usa uno tra `\"rgb_color\"` or`\"color_temp\"` in modalità notturna. 🌙"
+        },
+        "turn_on_lights": {
+          "description": "Seleziona per accedere le luci, qualora fossero spente. 🔆"
+        },
+        "initial_transition": {
+          "description": "Durata della prima transizione quando le luci passano dallo stato `off` a `on`, espressa in secondi. ⏲️"
+        },
+        "entity_id": {
+          "description": "ID entità dello switch. 📝"
+        },
+        "sunrise_time": {
+          "description": "Imposta un orario fisso (HH:MM:SS) per l'alba. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "Quando impostato su `true`,  tutte le opzioni saranno visibili come attributi dello switch in Home Assistant. 📝"
+        },
+        "max_brightness": {
+          "description": "Massima luminosità, in percentuale.💡"
+        },
+        "sleep_rgb_color": {
+          "description": "Colore RGB in modalità notturna (usato quando  `sleep_rgb_or_color_temp` è impostato su \"rgb_color\"). 🌈"
+        },
+        "take_over_control": {
+          "description": "Disattiva Illuminazione Adattativa se un'altra sorcente chiama `light.turn_on` mentre le luci sono accese e soggette all'adattamento. Tieni conto che questo comporterà una chiamata a `homeassistant.update_entity` ad ogni `interval`! 🔒"
+        },
+        "sleep_transition": {
+          "description": "Durata della transizione al passaggio da/verso la modalità luce notturna, espressa in secondi. 😴"
+        },
+        "autoreset_control_seconds": {
+          "description": "Rimuovi automaticamente  il colore impostato manualmente dopo un certo numero di secondi. Imposta  0 per disabilitare. ⏲️"
+        },
+        "adapt_delay": {
+          "description": "Tempo di attesa (in secondi) tra l'accensione della luce e i cambiamenti indotti da Illuminazione Adattativa. Può contribuire a ridurre lo sfarfallio. ⏲️"
+        },
+        "use_defaults": {
+          "description": "Imposta ai valori predefiniti non specificati nella chiamata al servizio. Opzioni possibili: \"current\" (predefinito, mantiene i valori correnti), \"factory\" (reimposta su un valore predefinito documentato) p \"configuration\" (reimposta sui valori predefiniti dello switch). ⚙️"
+        },
+        "separate_turn_on_commands": {
+          "description": "Usa chiamate distinte a `light.turn_on` per il colore e per la luminosità, necessario per alcuni tipi di luci. 🔀"
+        },
+        "prefer_rgb_color": {
+          "description": "Seleziona per preferire gli aggiustamenti di colore mediante RGB piuttosto che tramite temperatura colore, dove possibile. 🌈"
+        },
+        "max_color_temp": {
+          "description": "Temperatura colore più fredda, espressa in Kelvin. ❄️"
+        },
+        "sunset_offset": {
+          "description": "Modifica l'orario del tramonto con un offset positivo o negativo in secondi. ⏰"
+        },
+        "send_split_delay": {
+          "description": "Ritardo (ms) tra  i comandi,  per le luci che hanno `separate_turn_on_commands` e che non supportano l'impostazione simultanea di luminosità e  colore. ⏲️"
+        },
+        "sunset_time": {
+          "description": "Imposta un orario fisso (HH:MM:SS) per  il tramonto. 🌇"
+        },
+        "transition": {
+          "description": "Durata della transizione quando le luci cambiano, espressa in secondi. 🕑"
+        },
+        "min_sunset_time": {
+          "description": "Imposta il minimo orario per il tramonto (HH:MM:SS), per eventualmente ritardarlo. 🌅"
+        }
+      },
+      "description": "Cambia tutte le impostazioni che desideri nello switch. Le opzioni sono le stesse presenti nella procedura di configurazione."
+    },
+    "apply": {
+      "fields": {
+        "entity_id": {
+          "description": "L'`entity_id` dello switch a cui si applicano le impostazioni.📝"
+        },
+        "adapt_brightness": {
+          "description": "Seleziona per adattare la luminosità della luce. 🌞"
+        },
+        "turn_on_lights": {
+          "description": "Seleziona per accedere le luci, qualora fossero spente. 🔆"
+        },
+        "adapt_color": {
+          "description": "Seleziona per adattare il colore, per le luci che lo supportano. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Seleziona per preferire gli aggiustamenti di colore mediante RGB piuttosto che tramite temperatura colore, dove possibile. 🌈"
+        },
+        "lights": {
+          "description": "Una luce (o un insieme di luci) a cui applicare le impostazioni. 💡"
+        },
+        "transition": {
+          "description": "Durata della transizione quando le luci cambiano, espressa in secondi. 🕑"
+        }
+      },
+      "description": "Applica le impostazioni correnti di Illuminazione Adattativa alle luci."
+    },
+    "set_manual_control": {
+      "fields": {
+        "manual_control": {
+          "description": "Seleziona per aggiungere (\"true\") o rimuovere (\"false\") la luce dalla lista di quelle controllate manualmente . 🔒"
+        },
+        "entity_id": {
+          "description": "L'`entity_id` dello switch che controlla se  la luce deve operare in modalità manualmente controllata.📝"
+        },
+        "lights": {
+          "description": "entity_id delle luci, se non specificato, tutte le luci nello switch sono selezionate. 💡"
+        }
+      },
+      "description": "Evidenzia quando una luce è controllata manualmente."
     }
   }
+}

custom_components/adaptive_lighting/translations/ja.json

@@ -0,0 +1,48 @@
+{
+  "title": "明るさの自動調整",
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sunrise_offset": {
+          "description": "日の出時間を基準に秒単位で正値もしくは負値で調整する。⏰"
+        },
+        "only_once": {
+          "description": "一度だけ明るさを自動調整するには（`true`）、常に自動調整し続ける場合は（`false`）。"
+        },
+        "sunset_offset": {
+          "description": "日の入時間を基準に秒単位で正値もしくは負値で調整する。⏰"
+        },
+        "entity_id": {
+          "description": "スイッチのエンティティID。 📝"
+        }
+      }
+    },
+    "apply": {
+      "fields": {
+        "lights": {
+          "description": "適応する照明（か照明のリスト）の設定。 💡"
+        }
+      }
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "data": {},
+        "data_description": {},
+        "title": "明るさの自動調整オプション",
+        "sections": {
+          "advanced": {
+            "data": {
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: 最初に照明オンにするとき。`true`を設定すると、AL(適応型照明）は調色や明るさを指定せずや`light.turn_on`をしたときのみ適応します。❌🌈 例えば、適応型照明をシーンを有効にするときにしないようにする。`false`であれば、`service_data`に最初から、ALはシーンの状態に関係なく調色や明るさを適応する。`take_over_control`を有効にすることが必要。🕵️ "
+            },
+            "data_description": {
+              "sunrise_offset": "日の出時間を基準に秒単位で正値もしくは負値で調整する。⏰",
+              "sunset_offset": "日の入時間を基準に秒単位で正値もしくは負値で調整する。⏰"
+            }
+          }
+        }
+      }
+    }
+  }
+}

custom_components/adaptive_lighting/translations/ko.json

@@ -0,0 +1,277 @@
+{
+  "title": "적응형 조명",
+  "config": {
+    "step": {
+      "user": {
+        "title": "적응형 조명 인스턴스 이름 선택",
+        "description": "각 인스턴스는 여러 조명을 포함할 수 있습니다!",
+        "data": {
+          "name": "이름"
+        }
+      }
+    },
+    "abort": {
+      "already_configured": "이 장치는 이미 구성되었습니다"
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "title": "적응형 조명 옵션",
+        "description": "적응형 조명 구성요소를 구성합니다. 옵션 이름은 YAML 설정과 일치합니다. 이 항목을 YAML에서 정의한 경우 여기에 옵션이 표시되지 않습니다. 매개변수 효과를 시연하는 인터랙티브 그래프는 [이 웹 앱]({webapp_url})에서 확인할 수 있습니다. 자세한 내용은 [공식 문서]({docs_url})를 참조하세요.",
+        "data": {
+          "lights": "조명: 제어될 조명 entity_ids의 목록 (비어 있을 수 있음). 🌟",
+          "interval": "간격",
+          "transition": "전환",
+          "min_brightness": "최소 밝기: 밝기 최소 퍼센트. 💡",
+          "max_brightness": "최대 밝기: 밝기 최대 퍼센트. 💡",
+          "min_color_temp": "최소 색온도: 켈빈으로 표시된 가장 따뜻한 색온도. 🔥",
+          "max_color_temp": "최대 색온도: 켈빈으로 표시된 가장 차가운 색온도. ❄️",
+          "sleep_brightness": "수면 밝기",
+          "sleep_color_temp": "수면 색온도"
+        },
+        "data_description": {
+          "interval": "조명을 조정하는 빈도, 초 단위. 🔄",
+          "transition": "조명이 변경될 때 전환 기간, 초 단위. 🕑",
+          "sleep_brightness": "수면 모드에서 조명의 밝기 퍼센트. 😴",
+          "sleep_color_temp": "수면 모드에서 색온도 (sleep_rgb_or_color_temp가 `color_temp`일 때 사용) 켈빈 단위. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "초기 전환",
+              "prefer_rgb_color": "RGB 색상 선호: 가능할 경우 색온도 조정보다 RGB 색상 조정을 선호하는지 여부. 🌈",
+              "sleep_rgb_or_color_temp": "수면 rgb_or_color_temp",
+              "sleep_rgb_color": "수면 RGB 색상",
+              "sleep_transition": "수면 전환",
+              "transition_until_sleep": "수면까지 전환: 활성화되면, 적응형 조명은 수면 설정을 최소값으로 취급하고 일몰 후 이 값으로 전환합니다. 🌙",
+              "sunrise_time": "일출 시간",
+              "min_sunrise_time": "최소 일출 시간",
+              "max_sunrise_time": "최대 일출 시간",
+              "sunrise_offset": "일출 오프셋",
+              "sunset_time": "일몰 시간",
+              "min_sunset_time": "최소 일몰 시간",
+              "max_sunset_time": "최대 일몰 시간",
+              "sunset_offset": "일몰 오프셋",
+              "brightness_mode": "밝기 모드",
+              "brightness_mode_time_dark": "어두울 때 밝기 모드 시간",
+              "brightness_mode_time_light": "밝을 때 밝기 모드 시간",
+              "take_over_control": "제어 인계: 다른 소스가 조명이 켜져 있고 조정 중일 때 `light.turn_on`을 호출하면 적응형 조명을 비활성화합니다. 이는 매 `간격`마다 `homeassistant.update_entity`를 호출합니다! 🔒",
+              "detect_non_ha_changes": "비HA 변경 감지: `light.turn_on`이 아닌 상태 변경을 감지하고 조정을 중단합니다. `take_over_control`이 활성화되어 있어야 합니다. 🕵️ 주의: ⚠️ 일부 조명은 잘못된 '켜짐' 상태를 나타낼 수 있으며, 이로 인해 조명이 예상치 못하게 켜질 수 있습니다. 이러한 문제가 발생하면 이 기능을 비활성화하세요.",
+              "autoreset_control_seconds": "자동 제어 리셋 초",
+              "only_once": "한 번만: 조명을 켤 때만 조정 (`true`) 또는 계속해서 조정 (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "초기 켜짐 시 조정만: 조명을 처음 켤 때. `true`로 설정하면 `light.turn_on`이 색상이나 밝기를 지정하지 않고 호출될 때만 AL이 조정합니다. ❌🌈 예를 들어, 장면을 활성화할 때 조정을 방지합니다. `false`로 설정하면, AL은 초기 `service_data`에 색상이나 밝기의 존재 여부와 관계없이 조정합니다. `take_over_control`이 활성화되어 있어야 합니다. 🕵️",
+              "separate_turn_on_commands": "분리된 켜기 명령 사용: 일부 조명 유형에 필요한 색상과 밝기에 대해 별도의 `light.turn_on` 호출을 사용합니다. 🔀",
+              "send_split_delay": "분할 전송 지연",
+              "adapt_delay": "조정 지연",
+              "skip_redundant_commands": "중복 명령 건너뛰기: 목표 상태가 이미 조명의 알려진 상태와 동일한 조정 명령을 보내지 않습니다. 네트워크 트래픽을 최소화하고 일부 상황에서 조정 반응성을 향상시킵니다. 📉 물리적 조명 상태가 HA의 기록된 상태와 동기화되지 않는 경우 비활성화하세요.",
+              "intercept": "가로채기: 색상과 밝기의 즉각적인 조정을 가능하게 하기 위해 `light.turn_on` 호출을 가로챕니다. 🏎️ 색상과 밝기를 지원하지 않는 조명에 대해 비활성화합니다.",
+              "multi_light_intercept": "다중 조명 가로채기: 여러 조명을 대상으로 하는 `light.turn_on` 호출을 가로채고 조정합니다. ➗⚠️ 이는 단일 `light.turn_on` 호출을 여러 호출로 분할할 수 있음을 의미합니다. 예를 들어, 조명이 다른 스위치에 있을 때. `intercept`가 활성화되어 있어야 합니다.",
+              "include_config_in_attributes": "속성에 구성 포함: `true`로 설정하면 Home Assistant에서 스위치의 모든 옵션을 속성으로 표시합니다. 📝"
+            },
+            "data_description": {
+              "initial_transition": "조명이 `off`에서 `on`으로 바뀔 때 첫 번째 전환의 지속 시간, 초 단위. ⏲️",
+              "sleep_rgb_or_color_temp": "수면 모드에서 `\"rgb_color\"` 또는 `\"color_temp\"` 사용. 🌙",
+              "sleep_rgb_color": "수면 모드에서 RGB 색상 (sleep_rgb_or_color_temp가 \"rgb_color\"일 때 사용). 🌈",
+              "sleep_transition": "\"수면 모드\"가 전환될 때 전환 기간, 초 단위. 😴",
+              "sunrise_time": "일출 시간을 고정된 시간 (HH:MM:SS)으로 설정. 🌅",
+              "min_sunrise_time": "가장 이른 가상 일출 시간 (HH:MM:SS)을 설정하여 더 늦은 일출을 허용. 🌅",
+              "max_sunrise_time": "가장 늦은 가상 일출 시간 (HH:MM:SS)을 설정하여 더 일찍 일출을 허용. 🌅",
+              "sunrise_offset": "양수 또는 음수 오프셋(초)으로 일출 시간을 조정. ⏰",
+              "sunset_time": "일몰 시간을 고정된 시간 (HH:MM:SS)으로 설정. 🌇",
+              "min_sunset_time": "가장 이른 가상 일몰 시간 (HH:MM:SS)을 설정하여 더 늦은 일몰을 허용. 🌇",
+              "max_sunset_time": "가장 늦은 가상 일몰 시간 (HH:MM:SS)을 설정하여 더 일찍 일몰을 허용. 🌇",
+              "sunset_offset": "양수 또는 음수 오프셋(초)으로 일몰 시간을 조정. ⏰",
+              "brightness_mode": "사용할 밝기 모드. 가능한 값은 `default`, `linear`, `tanh` (uses `brightness_mode_time_dark` and `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(`brightness_mode='default'`인 경우 무시됨) 일출/일몰 전/후에 밝기를 높이거나 낮추는 데 걸리는 시간, 초 단위. 📈📉",
+              "brightness_mode_time_light": "(`brightness_mode='default'`인 경우 무시됨) 일출/일몰 후/전에 밝기를 높이거나 낮추는 데 걸리는 시간, 초 단위. 📈📉.",
+              "autoreset_control_seconds": "특정 초 후에 수동 제어를 자동으로 재설정. 0으로 설정하면 비활성화됩니다. ⏲️",
+              "send_split_delay": "`separate_turn_on_commands`에 대한 호출 사이의 지연 시간(밀리초)으로, 밝기와 색상을 동시에 설정하지 않는 조명에 대한 지연. ⏲️",
+              "adapt_delay": "조명을 켠 후 적응형 조명이 변경 사항을 적용하기까지의 대기 시간(초). 깜박임을 피하는 데 도움이 될 수 있습니다. ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "잘못된 옵션",
+      "entity_missing": "선택한 하나 이상의 조명 엔티티가 Home Assistant에서 누락됨"
+    }
+  },
+  "services": {
+    "apply": {
+      "name": "적용",
+      "description": "현재 적응형 조명 설정을 조명에 적용합니다.",
+      "fields": {
+        "entity_id": {
+          "description": "설정을 적용할 스위치의 `entity_id`. 📝",
+          "name": "entity_id"
+        },
+        "lights": {
+          "description": "설정을 적용할 조명(또는 조명 목록). 💡",
+          "name": "lights"
+        },
+        "transition": {
+          "description": "조명 변경 시 전환 기간, 초 단위. 🕑",
+          "name": "transition"
+        },
+        "adapt_brightness": {
+          "description": "조명의 밝기를 조정할지 여부. 🌞",
+          "name": "adapt_brightness"
+        },
+        "adapt_color": {
+          "description": "지원하는 조명의 색상을 조정할지 여부. 🌈",
+          "name": "adapt_color"
+        },
+        "prefer_rgb_color": {
+          "description": "가능할 경우 색온도 조정보다 RGB 색상 조정을 선호하는지 여부. 🌈",
+          "name": "prefer_rgb_color"
+        },
+        "turn_on_lights": {
+          "description": "현재 꺼져 있는 조명을 켤지 여부. 🔆",
+          "name": "turn_on_lights"
+        }
+      }
+    },
+    "set_manual_control": {
+      "name": "수동 제어 설정",
+      "description": "조명이 '수동 제어됨'으로 표시되었는지 여부를 표시합니다.",
+      "fields": {
+        "entity_id": {
+          "description": "`수동 제어됨`으로 (표시 해제)할 스위치의 `entity_id`. 📝",
+          "name": "entity_id"
+        },
+        "lights": {
+          "description": "조명의 entity_id(들), 지정하지 않으면 스위치의 모든 조명이 선택됩니다. 💡",
+          "name": "lights"
+        },
+        "manual_control": {
+          "description": "\"수동 제어\" 목록에서 조명을 추가(\"true\") 또는 제거(\"false\")할지 여부. 🔒",
+          "name": "manual_control"
+        }
+      }
+    },
+    "change_switch_settings": {
+      "name": "스위치 설정 변경",
+      "description": "스위치에서 원하는 모든 설정을 변경하세요. 여기에 있는 모든 옵션은 구성 흐름에서와 같습니다.",
+      "fields": {
+        "entity_id": {
+          "description": "스위치의 Entity ID. 📝",
+          "name": "entity_id"
+        },
+        "use_defaults": {
+          "description": "이 서비스 호출에서 지정되지 않은 기본값을 설정합니다. 옵션: \"현재\"(기본값, 현재 값을 유지), \"공장\"(문서화된 기본값으로 재설정), 또는 \"구성\"(스위치 구성 기본값으로 되돌림). ⚙️",
+          "name": "use_defaults"
+        },
+        "include_config_in_attributes": {
+          "description": "`true`로 설정하면 Home Assistant에서 스위치의 모든 옵션을 속성으로 표시합니다. 📝",
+          "name": "include_config_in_attributes"
+        },
+        "turn_on_lights": {
+          "description": "현재 꺼져 있는 조명을 켤지 여부. 🔆",
+          "name": "turn_on_lights"
+        },
+        "initial_transition": {
+          "description": "조명이 `off`에서 `on`으로 바뀔 때 첫 번째 전환의 지속 시간, 초 단위. ⏲️",
+          "name": "initial_transition"
+        },
+        "sleep_transition": {
+          "description": "\"수면 모드\"가 전환될 때 전환 기간, 초 단위. 😴",
+          "name": "sleep_transition"
+        },
+        "max_brightness": {
+          "description": "최대 밝기 퍼센트. 💡",
+          "name": "max_brightness"
+        },
+        "max_color_temp": {
+          "description": "켈빈으로 표시된 가장 차가운 색온도. ❄️",
+          "name": "max_color_temp"
+        },
+        "min_brightness": {
+          "description": "최소 밝기 퍼센트. 💡",
+          "name": "min_brightness"
+        },
+        "min_color_temp": {
+          "description": "켈빈으로 표시된 가장 따뜻한 색온도. 🔥",
+          "name": "min_color_temp"
+        },
+        "only_once": {
+          "description": "조명을 켤 때만 조정 (`true`) 또는 계속해서 조정 (`false`). 🔄",
+          "name": "only_once"
+        },
+        "prefer_rgb_color": {
+          "description": "가능할 경우 색온도 조정보다 RGB 색상 조정을 선호하는지 여부. 🌈",
+          "name": "prefer_rgb_color"
+        },
+        "separate_turn_on_commands": {
+          "description": "일부 조명 유형에 필요한 색상과 밝기에 대해 별도의 `light.turn_on` 호출을 사용합니다. 🔀",
+          "name": "separate_turn_on_commands"
+        },
+        "send_split_delay": {
+          "description": "밝기와 색상을 동시에 설정하지 않는 조명에 대한 `separate_turn_on_commands` 호출 사이의 지연 시간(밀리초). ⏲️",
+          "name": "send_split_delay"
+        },
+        "sleep_brightness": {
+          "description": "수면 모드에서 조명의 밝기 퍼센트. 😴",
+          "name": "sleep_brightness"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "수면 모드에서 `\"rgb_color\"` 또는 `\"color_temp\"` 사용. 🌙",
+          "name": "sleep_rgb_or_color_temp"
+        },
+        "sleep_rgb_color": {
+          "description": "수면 모드에서 RGB 색상 (sleep_rgb_or_color_temp가 \"rgb_color\"일 때 사용). 🌈",
+          "name": "sleep_rgb_color"
+        },
+        "sleep_color_temp": {
+          "description": "수면 모드에서 색온도 (sleep_rgb_or_color_temp가 `color_temp`일 때 사용) 켈빈 단위. 😴",
+          "name": "sleep_color_temp"
+        },
+        "sunrise_offset": {
+          "description": "양수 또는 음수 오프셋(초)으로 일출 시간을 조정. ⏰",
+          "name": "sunrise_offset"
+        },
+        "sunrise_time": {
+          "description": "일출 시간을 고정된 시간 (HH:MM:SS)으로 설정. 🌅",
+          "name": "sunrise_time"
+        },
+        "sunset_offset": {
+          "description": "양수 또는 음수 오프셋(초)으로 일몰 시간을 조정. ⏰",
+          "name": "sunset_offset"
+        },
+        "sunset_time": {
+          "description": "일몰 시간을 고정된 시간 (HH:MM:SS)으로 설정. 🌇",
+          "name": "sunset_time"
+        },
+        "max_sunrise_time": {
+          "description": "가장 늦은 가상 일출 시간 (HH:MM:SS)을 설정하여 더 일찍 일출을 허용. 🌅",
+          "name": "max_sunrise_time"
+        },
+        "min_sunset_time": {
+          "description": "가장 이른 가상 일몰 시간 (HH:MM:SS)을 설정하여 더 늦은 일몰을 허용. 🌇",
+          "name": "min_sunset_time"
+        },
+        "take_over_control": {
+          "description": "다른 소스가 조명이 켜져 있고 조정 중일 때 `light.turn_on`을 호출하면 적응형 조명을 비활성화합니다. 이는 매 `간격`마다 `homeassistant.update_entity`를 호출합니다! 🔒",
+          "name": "take_over_control"
+        },
+        "detect_non_ha_changes": {
+          "description": "`light.turn_on`이 아닌 상태 변경을 감지하고 조정을 중단합니다. `take_over_control`이 활성화되어 있어야 합니다. 🕵️ 주의: ⚠️ 일부 조명은 잘못된 '켜짐' 상태를 나타낼 수 있으며, 이로 인해 조명이 예상치 못하게 켜질 수 있습니다. 이러한 문제가 발생하면 이 기능을 비활성화하세요.",
+          "name": "detect_non_ha_changes"
+        },
+        "transition": {
+          "description": "조명이 변경될 때 전환 기간, 초 단위. 🕑",
+          "name": "transition"
+        },
+        "adapt_delay": {
+          "description": "조명을 켠 후 적응형 조명이 변경 사항을 적용하기까지의 대기 시간(초). 깜박임을 피하는 데 도움이 될 수 있습니다. ⏲️",
+          "name": "adapt_delay"
+        },
+        "autoreset_control_seconds": {
+          "description": "특정 초 후에 수동 제어를 자동으로 재설정. 0으로 설정하면 비활성화됩니다. ⏲️",
+          "name": "autoreset_control_seconds"
+        }
+      }
+    }
+  }
+}

custom_components/adaptive_lighting/translations/nb.json

@@ -1,50 +1,222 @@
 {
-   "title":"Adaptiv Belysning",
-   "config":{
-      "step":{
-         "user":{
-            "title":"Velg et navn",
-            "description":"Velg et navn for denne konfigurasjonen for adaptiv belysning - hver konfigurasjon kan inneholde flere lyskilder!",
-            "data":{
-               "name":"Navn"
-            }
-         }
-      },
-      "abort":{
-         "already_configured":"Denne enheten er allerede konfigurert!"
+  "title": "Adaptiv Belysning",
+  "config": {
+    "step": {
+      "user": {
+        "title": "Velg et navn",
+        "description": "Velg et navn for denne konfigurasjonen for adaptiv belysning - hver konfigurasjon kan inneholde flere lyskilder!",
+        "data": {
+          "name": "Navn"
+        }
       }
-   },
-   "options":{
-      "step":{
-         "init":{
-            "title":"Adaptiv Belysning Innstillinger",
-            "description":"Alle innstillinger for en adaptiv belysning konfigurasjon. Innstillingene er identiske med innstillingene for YAML konfigurasjon. Ingen innstillinger vises dersom du har definert adaptive_lighting i din YAML konfigurasjon.",
-            "data":{
-               "lights":"Lys / Lyskilder",
-               "initial_transition":"'initial_transition': overgangen (i sekunder) når lysene skrus av eller på - eller når 'sleep_state' endres",
-               "interval":"'interval': tiden mellom oppdateringer (i sekunder)",
-               "max_brightness":"'max_brightness': den høyeste lysstyrken (i prosent) på lysene i løpet av en syklus",
-               "max_color_temp":"'max_color_temp': den høyeste fargetemperaturen (i kelvin) på lysene i løpet av en syklus",
-               "min_brightness":"'min_brightness': den laveste lysstyrken (i prosent) på lysene i løpet av en syklus",
-               "min_color_temp":"'min_color_temp': den laveste fargetemperaturen (i kelvin) på lysene i løpet av en syklus",
-               "only_once":"'only_once': anvend innstillingene for adaptiv belysning kun når lysene skrus av eller på",
-               "prefer_rgb_color":"'prefer_rgb_color': benytt rgb i stedet for fargetemperatur dersom det er mulig",
-               "separate_turn_on_commands":"'separate_turn_on_commands': separer kommandone i 'light.turn_on' for hver attributt (farge, lysstyrke, osv.). Dette kan være nødvendig for enkelte typer lys / lyskilder",
-               "sleep_brightness":"'sleep_brightness': lysstyrken på lysene (i prosent) når 'sleep_mode' (søvnmodus) er aktiv",
-               "sleep_color_temp":"'sleep_color_temp': fargetemperaturen på lysene (i kelvin) når 'sleep_mode' (søvnmodus) er aktiv",
-               "sunrise_offset":"'sunrise_offset': hvor lenge før (-) eller etter (+) tidspunktet solen står opp (lokalt) skal defineres som soloppgang (i sekunder)",
-               "sunrise_time":"'sunrise_time': definer tidspunktet for soloppgang manuelt (i følgende format: TT:MM:SS)",
-               "sunset_offset":"'sunset_offset': hvor lenge før (-) eller etter (+) tidspunktet solen går ned (lokalt) skal defineres som solnedgang (i sekunder)",
-               "sunset_time":"'sunset_time': definer tidspunktet for solnedgang manuelt (i følgende format: TT:MM:SS - f. eks: '20:30:00' vil definere tidspunktet for solnegang som halv-ni på kvelden)",
-               "take_over_control":"'take_over_control': dersom en annen tjeneste enn adaptiv belysning skrur lysene av eller på, vil automatisk adaptering av lyset stoppes inntil lyset (eller den tilhørende bryteren for adaptiv belysning) blir slått av - og på igjen",
-               "detect_non_ha_changes":"'detect_non_ha_changes': registrerer alle endringer i lysstyrke over 10% med opprinnelse utenfor Home Assistant - krever at 'take_over_control' er aktivert (OBS: tilkaller 'homeassistant.update_entity' ved hvert 'interval'!)",
-               "transition":"'transition': varigheten (i sekunder) på overgangen når lysene oppdateres "
+    },
+    "abort": {
+      "already_configured": "Denne enheten er allerede konfigurert!"
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "title": "Adaptiv Belysning Innstillinger",
+        "description": "Alle innstillinger for en adaptiv belysning konfigurasjon. Innstillingene er identiske med innstillingene for YAML konfigurasjon. Ingen innstillinger vises dersom du har definert adaptive_lighting i din YAML konfigurasjon.",
+        "data": {
+          "lights": "Lys / Lyskilder",
+          "interval": "'interval': tiden mellom oppdateringer (i sekunder)",
+          "transition": "'transition': varigheten (i sekunder) på overgangen når lysene oppdateres ",
+          "min_brightness": "'min_brightness': den laveste lysstyrken (i prosent) på lysene i løpet av en syklus",
+          "max_brightness": "'max_brightness': den høyeste lysstyrken (i prosent) på lysene i løpet av en syklus",
+          "min_color_temp": "'min_color_temp': den laveste fargetemperaturen (i kelvin) på lysene i løpet av en syklus",
+          "max_color_temp": "'max_color_temp': den høyeste fargetemperaturen (i kelvin) på lysene i løpet av en syklus",
+          "sleep_brightness": "'sleep_brightness': lysstyrken på lysene (i prosent) når 'sleep_mode' (søvnmodus) er aktiv",
+          "sleep_color_temp": "'sleep_color_temp': fargetemperaturen på lysene (i kelvin) når 'sleep_mode' (søvnmodus) er aktiv"
+        },
+        "data_description": {
+          "interval": "Frekvens til å tilpasse lys, i sekunder.",
+          "transition": "Varighet på overgang når lysene  endres, i sekunder.",
+          "sleep_brightness": "Lysstyrkeprosent på lysene i sove modus.",
+          "sleep_color_temp": "Fargetemperatur i sove modus (brukes når `sleep_rgb_or_color_temp` er `color_temp`) i Kelvin."
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "'initial_transition': overgangen (i sekunder) når lysene skrus av eller på - eller når 'sleep_state' endres",
+              "prefer_rgb_color": "'prefer_rgb_color': benytt rgb i stedet for fargetemperatur dersom det er mulig",
+              "transition_until_sleep": "transition_until_sleep: Når aktivert, Adaptive lightning vil behandle sove innstillingene som minimum, bevege seg til disse verdiene etter solnedgang.",
+              "sunrise_time": "'sunrise_time': definer tidspunktet for soloppgang manuelt (i følgende format: TT:MM:SS)",
+              "sunrise_offset": "'sunrise_offset': hvor lenge før (-) eller etter (+) tidspunktet solen står opp (lokalt) skal defineres som soloppgang (i sekunder)",
+              "sunset_time": "'sunset_time': definer tidspunktet for solnedgang manuelt (i følgende format: TT:MM:SS - f. eks: '20:30:00' vil definere tidspunktet for solnegang som halv-ni på kvelden)",
+              "sunset_offset": "'sunset_offset': hvor lenge før (-) eller etter (+) tidspunktet solen går ned (lokalt) skal defineres som solnedgang (i sekunder)",
+              "take_over_control": "'take_over_control': dersom en annen tjeneste enn adaptiv belysning skrur lysene av eller på, vil automatisk adaptering av lyset stoppes inntil lyset (eller den tilhørende bryteren for adaptiv belysning) blir slått av - og på igjen",
+              "detect_non_ha_changes": "'detect_non_ha_changes': registrerer alle endringer i lysstyrke over 10% med opprinnelse utenfor Home Assistant - krever at 'take_over_control' er aktivert (OBS: tilkaller 'homeassistant.update_entity' ved hvert 'interval'!)",
+              "only_once": "'only_once': anvend innstillingene for adaptiv belysning kun når lysene skrus av eller på",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_on: Når lysene skrues på. Hvis satt til \"sann\", AL vil bare  hvis \"light.turn_on\" er aktivert uten spesifisert farge og styrke.  Dette f.eks. forhindrer aktivering når en scene aktiveres. Hvis \"false\", AL  vil aktivere uansett om farge og stryke er satt av i opprinnelig \"service_data\". Trenger \"take_over_control\" er aktivert. ",
+              "separate_turn_on_commands": "'separate_turn_on_commands': separer kommandone i 'light.turn_on' for hver attributt (farge, lysstyrke, osv.). Dette kan være nødvendig for enkelte typer lys / lyskilder",
+              "skip_redundant_commands": "skip_redundant_commands:  Dropp sending av tilpassnings kommandoer hvor målets tilstand allerede er lik den kjente tilstanden til lyset. Minimerer nettverk trafikk og forbedrer tilpasningens responsitivitet i noen situasjoner. Skru av hvis fysisk tilstand til lyset er ute av synkronisering med HA´s registrere tilstand.",
+              "intercept": "Bryt: Bryt og tilpass `light.turn_on` kall for å aktivere umiddelbar farge og styrke tilpassning. Deaktiver for lys som ikke støtter `light.turn_on` med farge og styrke.",
+              "multi_light_intercept": "multi_light_incept:  Avskjære og tilpasse \"light.turn_on\" kall til flere lyskilder. Dette kan medføre oppsplitting av et enkelt \"light.turn_on\" kall til flere kall, f.eks når lys tilhører flere brytere. Dette krever at \"intercept\" er aktivert.",
+              "include_config_in_attributes": "include_config_in_attributes: Vis alle valg som attributes på bryteren i Home Assistant når satt til `true`."
+            },
+            "data_description": {
+              "initial_transition": "Varighet på første overgang når lysene endres fra `off` til `on` i sekunder.",
+              "sleep_rgb_or_color_temp": "Bruk enten `\"rgb_color\"` eller `\"color_temp\"` i sove modus.",
+              "sleep_rgb_color": "RGB farger i sove modus (brukes når \"sleep_rgb_or_color_temp\" er \"rgb_color\")",
+              "sleep_transition": "Varighet på overgang når \"sleep mode\" er aktivert i sekunder.",
+              "sunrise_time": "Sett et fast tidspunkt (TT:MM:SS) for soloppgang.",
+              "min_sunrise_time": "Sett tidligste virituelle tidspunkt for soloppgang (TT:MM:SS), muliggjør for senere soloppganger",
+              "max_sunrise_time": "Sett det seneste virituelle tidspunktet for soloppgang (TT:MM:SS), muliggjør for tidligere soloppganger.",
+              "sunrise_offset": "Juster soloppgang tidspunkt med en positiv eller negativ forskyvning i sekunder. ⏰",
+              "sunset_time": "Sett et fast tidspunkt (TT:MM:SS) for solnedgang.",
+              "min_sunset_time": "Sett det tidligste virituelle tidspunktet for solnedgang (TT:MM:SS), muliggjør for senere solnedgang.",
+              "max_sunset_time": "Sett det seneste virituelle tidspunktet for solnedgang (TT:MM:SS), muliggjør for tidligere solnedgang.",
+              "sunset_offset": "Juster soloppgang tidspunkt med en positiv eller negativ forskyvning i sekunder. ⏰",
+              "brightness_mode": "Hvilken lysstyrke moduse skal brukes. Mulige verdier er `default`, `linear`, and `tanh` (bruker `brightness_mode_time_dark` og `brightness_mode_time_light`).",
+              "brightness_mode_time_dark": "(Ignorere hvis `brightness_mode='default'`) Varigheten i sekunder for å justere opp/ned lysstyrken før/etter soloppgang/solnedgang.",
+              "brightness_mode_time_light": "(Ignorere hvis `brightness_mode='default'`) Varigheten i sekunder for å justere opp/ned lysstyrken før/etter soloppgang/solnedgang.",
+              "autoreset_control_seconds": "Automatisk reset manuell kontroll etter et gitt antall sekunder. Sett til 0 for å skru av.",
+              "send_split_delay": "Forsinkelse (ms) mellom `separate_turn_on_commands` for lys som ikke støtter simultane styrke og farge innstillinger.",
+              "adapt_delay": "Ventetid (sekunder) mellom at lyset skrues på og Adaptive Lightning sender endringer. Kan hjelpe til for å unngå blinking."
             }
-         }
-      },
-      "error":{
-         "option_error":"En eller flere valgte innstillinger er ugyldige",
-         "entity_missing": "Et utvalgt lys ble ikke funnet"
+          }
+        }
       }
-   }
+    },
+    "error": {
+      "option_error": "En eller flere valgte innstillinger er ugyldige",
+      "entity_missing": "Et utvalgt lys ble ikke funnet"
+    }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sunrise_offset": {
+          "description": "Juster soloppgang tidspunkt med en positiv eller negativ forskyvning i sekunder.  ⏰"
+        },
+        "only_once": {
+          "description": "Tilpass lys kun når dei er skrudd på (`true`) eller fortsett å tilpasse dei (`false`)"
+        },
+        "sunset_offset": {
+          "description": "Juster soloppgang tidspunkt med en positiv eller negativ forskyvning i sekunder. ⏰"
+        },
+        "use_defaults": {
+          "description": "Sett  default verdier ikke spesifisert i dette service kallet. Muligheter: \"current\" (default, fortsetter med nåværende verdier), \"factory\" (nullstiller til dokumenterte defaults), eller \"configuration\" (går tilbake til bryter defaults)."
+        },
+        "include_config_in_attributes": {
+          "description": "Vis alle muligheter som valg på bryteren i Home Assistant når satt til \"true\"."
+        },
+        "initial_transition": {
+          "description": "Varighet på første overgang når lysene endres fra `off` til `on` i sekunder."
+        },
+        "entity_id": {
+          "description": "Bryterens Entity ID."
+        },
+        "sleep_transition": {
+          "description": "Varighet på overgang når \"sleep mode\" er aktivert i sekunder."
+        },
+        "max_brightness": {
+          "description": "Maksimal lysstyrke prosent."
+        },
+        "separate_turn_on_commands": {
+          "description": "Bruk separat `light.turn_on` kall for farge og styrke, nødvendig for noen typer lys."
+        },
+        "min_color_temp": {
+          "description": "Varmeste farge temperatur i Kelvin."
+        },
+        "prefer_rgb_color": {
+          "description": "Foretrekke RGB farge inntsillinger over  lysets fargetemperatur innstilling når mulig."
+        },
+        "max_color_temp": {
+          "description": "Kaldeste farge temperatur i Kelvin."
+        },
+        "min_brightness": {
+          "description": "Minste lysstyrke prosent."
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Bruk enten `\"rgb_color\"` eller `\"color_temp\"` i sove modus."
+        },
+        "sleep_brightness": {
+          "description": "Lysstyrkeprosent på lysene i sove modus."
+        },
+        "send_split_delay": {
+          "description": "Forsinkelse (ms) mellom `separate_turn_on_commands` for lys som ikke støtter simultane styrke og farge innstillinger."
+        },
+        "sleep_rgb_color": {
+          "description": "RGB farger i sove modus (brukes når \"sleep_rgb_or_color_temp\" er \"rgb_color\")"
+        },
+        "sleep_color_temp": {
+          "description": "Fargetemperatur i sove modus (brukes når `sleep_rgb_or_color_temp` er `color_temp`) i Kelvin."
+        },
+        "sunrise_time": {
+          "description": "Sett et fast tidspunkt (TT:MM:SS) for soloppgang."
+        },
+        "sunset_time": {
+          "description": "Set et fast tidspunkt (TT:MM:SS) for solnedgang"
+        },
+        "max_sunrise_time": {
+          "description": "Sett det seneste virituelle tidspunktet for soloppgang (TT:MM:SS), muliggjør for tidligere soloppganger."
+        },
+        "min_sunset_time": {
+          "description": "Sett det tidligeste virituelle tidspunktet for solnedgang (TT:MM:SS), muliggjør for senere solnedgang."
+        },
+        "detect_non_ha_changes": {
+          "description": "Detekterer og stopper tilpasningen for ikke-`light.turn_on` tilstander . Trenger  `take_over_control` aktivert. Advarsel: Noen lys kan gi falske signal om  'on' tilstand, som kan medføre at lysene  skrur seg på av seg selv. Skru av denne funksjonen om dette inntreffer."
+        },
+        "autoreset_control_seconds": {
+          "description": "Automatisk reset manuell kontroll etter et gitt antall sekunder. Sett til 0 for å skru av."
+        },
+        "transition": {
+          "description": "Varighet på overgang når lysene  endres, i sekunder."
+        },
+        "adapt_delay": {
+          "description": "Ventetid (sekunder) mellom at lyset skrues på og Adaptive Lightning sender endringer. Kan hjelpe til for å unngå blinking."
+        },
+        "turn_on_lights": {
+          "description": "Skru på lys som fortiden er skrudd av."
+        },
+        "take_over_control": {
+          "description": "Skrur av Adaptive Lightning hvis en annen kilde kaller `light.turn_on` mens lysene er på og blir styrt. Merk  at dette kaller `homeassistant.update_entity` hvert eneste`interval`!"
+        }
+      },
+      "description": "Endre hvilken som helst innstilling i bryteren. Alle valg er det samme som i konfigurasjons prosessen."
+    },
+    "apply": {
+      "fields": {
+        "lights": {
+          "description": "Et lys (eller ei liste av lys) instillingene skal påvirke. 💡"
+        },
+        "entity_id": {
+          "description": "\"entity_id\" på bryteren hvor innstillingene skal legges til."
+        },
+        "transition": {
+          "description": "Varighet på overgang når lysene  endres, i sekunder."
+        },
+        "adapt_brightness": {
+          "description": "Om å tilpasse styrken til lyset."
+        },
+        "adapt_color": {
+          "description": "Om å tilpasse fargen på støttelysene."
+        },
+        "prefer_rgb_color": {
+          "description": "Foretrekke RGB farge inntsillinger over  lysets fargetemperatur innstilling når mulig."
+        },
+        "turn_on_lights": {
+          "description": "Skru på lys som fortiden er skrudd av."
+        }
+      },
+      "description": "Aktiver nåværende Adaptive Lighting innstillinger til lysene."
+    },
+    "set_manual_control": {
+      "fields": {
+        "entity_id": {
+          "description": "\"entity_id\" på bryteren som skal (u)markeres med at lyset er \"manuelt kontrollert\""
+        },
+        "manual_control": {
+          "description": "Enten å legge til (\"true\") eller fjerne (\"false\") lys fra \"manual_control\" listen."
+        },
+        "lights": {
+          "description": "entity_id(s) til lysene, hvis ikke spesifisert, alle lys i bryteren som er valgt."
+        }
+      },
+      "description": "Marker om et lys er 'manually controlled'"
+    }
+  }
 }

custom_components/adaptive_lighting/translations/nl.json

@@ -4,10 +4,17 @@
     "step": {
       "user": {
         "title": "Kies een naam voor de adaptieve verlichting integratie",
-        "description": "Kies een naam voor deze integratie. U kunt verschillende integratie van Adaptieve verlichting uitvoeren, elk van deze kan meerdere lichten bevatten!",
+        "description": "Elk exemplaar kan meerdere lichten bevatten!",
         "data": {
           "name": "Naam"
         }
+      },
+      "menu": {
+        "data": {
+          "action": "Actie"
+        },
+        "title": "Maak of dupliceer",
+        "description": "Wil je een nieuwe instantie aanmaken of een bestaande dupliceren?"
       }
     },
     "abort": {
@@ -18,34 +25,73 @@
     "step": {
       "init": {
         "title": "Adaptieve verlichting instellingen",
-        "description": "Alle instellingen voor een Adaptieve verlichting component. De optienamen komen overeen met de YAML-instellingen. Er worden geen opties weergegeven als u het item adaptive_lighting hebt gedefinieerd in uw YAML-configuratie.",
+        "description": "Alle instellingen voor een Adaptieve verlichting component. De optienamen komen overeen met de YAML-instellingen. Er worden geen opties weergegeven als u het item `adaptive_lighting` hebt gedefinieerd in uw YAML-configuratie.\nVoor een demonstratie met interactieve grafieken, parameters en effecten, bezoek [deze web applicatie]({webapp_url}). Voor verdere details, bekijk de [officiële documentatie]({docs_url}).",
         "data": {
-          "lights": "Lichten",
-          "initial_transition": "initial_transition: Wanneer lichten van 'uit' naar 'aan' gaan. (seconden)",
-          "sleep_transition": "sleep_transition: Wanneer 'sleep_state' verandert. (seconden)",
+          "lights": "Lampen: lijst van `light` entiteiten om te bedienen (kan leeg zijn). 🌟",
           "interval": "interval: Tijd tussen switch-updates. (seconden)",
-          "max_brightness": "max_brightness: Hoogste helderheid van lichten tijdens een cyclus. (%)",
-          "max_color_temp": "max_color_temp: Koudste tint van de kleurtemperatuurcyclus. (kelvin)",
-          "min_brightness": "min_brightness: Laagste helderheid van lichten tijdens een cyclus. (%)",
-          "min_color_temp": "min_color_temp, Warmste tint van de kleurtemperatuurcyclus. (kelvin)",
-          "only_once": "only_once: pas de verlichting alleen aan wanneer u ze aanzet.",
-          "prefer_rgb_color": "prefer_rgb_color: Gebruik waar mogelijk 'rgb_color' in plaats van 'color_temp'.",
-          "separate_turn_on_commands": "separate_turn_on_commands: Scheid de commando's voor elk attribuut (kleur, helderheid, enz.) in 'light.turn_on' (vereist voor sommige lampen).",
-          "send_split_delay": "send_split_delay: wacht tussen commando's (milliseconden), wanneer separate_turn_on_commands wordt gebruikt. Kan ervoor zorgen dat beide commando's correct door de lamp worden afgehandeld.",
-          "sleep_brightness": "sleep_brightness, helderheidsinstelling voor slaapstand. (%)",
-          "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp, gebruik 'rgb_color' of 'color_temp'",
-          "sleep_rgb_color": "sleep_rgb_color, in RGB",
-          "sleep_color_temp": "sleep_color_temp: Kleurtemperatuurinstelling voor slaapstand. (kelvin)",
-          "sunrise_offset": "sunrise_offset: Hoe lang voor(-) of na(+) zonsopgang uitvoeren (+/- seconden)",
-          "sunrise_time": "sunrise_time: Handmatige wijziging van de zonsopgangstijd, indien 'Geen', wordt de werkelijke zonsopgangstijd op uw locatie gebruikt (UU:MM:SS)",
-          "max_sunrise_time": "max_sunrise_time: handmatige aanpassing van de maximale zonsopgangstijd, indien 'Geen', wordt de werkelijke zonsopgangstijd op uw locatie gebruikt (UU:MM:SS)",
-          "sunset_offset": "sunset_offset: Hoe lang voor(-) of na(+) zonsondergang uitvoeren (+/- seconden)",
-          "sunset_time": "sunset_time: handmatige onderdrukking van de zonsondergangstijd, indien 'Geen', wordt de werkelijke zonsopgangstijd op uw locatie gebruikt (UU:MM:SS)",
-          "min_sunset_time": "min_sunset_time: handmatige onderdrukking van de minimale zonsondergangstijd, indien 'Geen', wordt de werkelijke zonsondergangstijd op uw locatie gebruikt (UU:MM:SS)",
-          "take_over_control": "take_over_control: Als iets anders dan Adaptive Lighting 'light.turn_on' roept wanneer een lamp al aan is, stop dan met het aanpassen van het licht totdat het (of de schakelaar) uit -> aan gaat.",
-          "detect_non_ha_changes": "detect_non_ha_changes: detecteert alle >10% wijzigingen aan de lichten (ook buiten HA), vereist dat 'take_over_control' is ingeschakeld (heet 'homeassistant.update_entity' elke 'interval'!)",
           "transition": "Overgangstijd bij het aanbrengen van een wijziging op de lichten (seconden)",
-          "adapt_delay": "adapt_delay: wachttijd tussen het inschakelen van het licht (seconden) en het aanbrengen van wijzigingen in de lichtstatus door Adaptieve verlichting. Kan flikkering voorkomen."
+          "min_brightness": "min_brightness: Laagste helderheid van lichten tijdens een cyclus. (%)",
+          "max_brightness": "max_brightness: Hoogste helderheid van lichten tijdens een cyclus. (%)",
+          "min_color_temp": "min_color_temp, Warmste tint van de kleurtemperatuurcyclus. (Kelvin)",
+          "max_color_temp": "max_color_temp: Koudste tint van de kleurtemperatuurcyclus. (kelvin)",
+          "sleep_brightness": "sleep_brightness, helderheidsinstelling voor slaapstand. (%)",
+          "sleep_color_temp": "sleep_color_temp: Kleurtemperatuurinstelling voor slaapstand. (kelvin)"
+        },
+        "data_description": {
+          "interval": "Frequentie om de lampen aan te passen, in seconden. 🔄",
+          "transition": "Duur van de overgang, in seconden, als lampen aanpassen. 🕑",
+          "sleep_brightness": "Helderheidspercentage van lampen in slaapstand. 😴",
+          "sleep_color_temp": "Kleurtemperatuur in slaapmodus (gebruikt wanneer `sleep_rgb_or_color_temp` gelijk is aan `color_temp`) in Kelvin. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition: Wanneer lichten van 'uit' naar 'aan' gaan. (seconden)",
+              "prefer_rgb_color": "prefer_rgb_color: Gebruik waar mogelijk 'rgb_color' in plaats van 'color_temp'.",
+              "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp, gebruik 'rgb_color' of 'color_temp'",
+              "sleep_rgb_color": "sleep_rgb_color, in RGB",
+              "sleep_transition": "sleep_transition: Wanneer 'sleep_state' verandert. (seconden)",
+              "transition_until_sleep": "transition_until_sleep: Wanneer ingeschakeld, zal Adaptieve verlichting de slaapinstellingen behandelen als het minimum, overgaand naar deze waarden na zonsondergang. 🌙",
+              "sunrise_time": "sunrise_time: Handmatige wijziging van de zonsopgangstijd, indien 'Geen', wordt de werkelijke zonsopgangstijd op uw locatie gebruikt (UU:MM:SS)",
+              "max_sunrise_time": "max_sunrise_time: handmatige aanpassing van de maximale zonsopgangstijd, indien 'Geen', wordt de werkelijke zonsopgangstijd op uw locatie gebruikt (UU:MM:SS)",
+              "sunrise_offset": "sunrise_offset: Hoe lang voor(-) of na(+) zonsopgang uitvoeren (+/- seconden)",
+              "sunset_time": "sunset_time: handmatige onderdrukking van de zonsondergangstijd, indien 'Geen', wordt de werkelijke zonsopgangstijd op uw locatie gebruikt (UU:MM:SS)",
+              "min_sunset_time": "min_sunset_time: handmatige onderdrukking van de minimale zonsondergangstijd, indien 'Geen', wordt de werkelijke zonsondergangstijd op uw locatie gebruikt (UU:MM:SS)",
+              "sunset_offset": "sunset_offset: Hoe lang voor(-) of na(+) zonsondergang uitvoeren (+/- seconden)",
+              "take_over_control": "take_over_control: Als iets anders dan Adaptieve verlichting 'light.turn_on' roept wanneer een lamp al aan is, stop dan met het aanpassen van het licht totdat het (of de schakelaar) uit -> aan gaat.",
+              "detect_non_ha_changes": "detect_non_ha_changes: Detecteert en stopt aanpassingen voor`light.turn_on` statuswijzigingen. Vereist dat`take_over_control` is ingeschakeld. 🕵️ Voorzichtig: ⚠️ Sommige lampen kunnen een 'aan' status vals aangeven, wat kan leiden tot onverwacht inschakelen van lampen. Schakel deze functie uit als je dergelijke problemen tegenkomt.",
+              "only_once": "only_once: pas de verlichting alleen aan wanneer u ze aanzet.",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Bij het initieel inschakelen van de lampen. Als dit op `true` is ingesteld, past Av alleen aan als `light.turn_on` wordt aangeroepen zonder een kleur of helderheid te specificeren. ❌🌈 Dit voorkomt bijvoorbeeld aanpassing bij het activeren van een scène. Als het `false` is, past Av aan ongeacht de aanwezigheid van kleur of helderheid in de initiële `service_data`. `take_over_control` moet ingeschakeld zijn. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Scheid de commando's voor elk attribuut (kleur, helderheid, enz.) in 'light.turn_on' (vereist voor sommige lampen).",
+              "send_split_delay": "send_split_delay: wacht tussen commando's (milliseconden), wanneer separate_turn_on_commands wordt gebruikt. Kan ervoor zorgen dat beide commando's correct door de lamp worden afgehandeld.",
+              "adapt_delay": "adapt_delay: wachttijd tussen het inschakelen van het licht (seconden) en het aanbrengen van wijzigingen in de lichtstatus door Adaptieve verlichting. Kan flikkering voorkomen.",
+              "skip_redundant_commands": "skip_redundant_commands: Sla het verzenden van aanpassingscommando's over waarvan de doelstatus al gelijk is aan de bekende status van de lamp. Minimaliseert netwerkverkeer en verbetert de responsiviteit van de aanpassing in sommige situaties. 📉Schakel uit als de fysieke lichtstatus niet meer synchroon loopt met de door HA geregistreerde status.",
+              "intercept": "intercept: Onderschep en pas `light.turn_on` oproepen aan om directe kleur- en helderheidsaanpassing mogelijk te maken. 🏎️ Schakel uit voor lampen die `light.turn_on` niet ondersteunen met kleur en helderheid.",
+              "multi_light_intercept": "multi_light_intercept: Onderschep en pas `light.turn_on` oproepen aan die gericht zijn op meerdere lampen. ➗⚠️ Dit kan resulteren in het opsplitsen van een enkele `light.turn_on` call in meerdere calls, bijvoorbeeld wanneer lampen zich in verschillende schakelaars bevinden. Vereist dat `intercept` is ingeschakeld.",
+              "include_config_in_attributes": "include_config_in_attributes: Toon alle opties als attributen op de schakelaar in Home Assistant wanneer ingesteld op `true`. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Duur van de eerste overgang wanneer de lampen van `uit` naar `aan`gaan, in seconden. ⏲️",
+              "sleep_rgb_or_color_temp": "Gebruik één van beide `\"rgb_color\"` of `\"color_temp\"` in slaapstand. 🌙",
+              "sleep_rgb_color": "RGB kleur in slaapstand (wordt gebruikt wanneer `sleep_rgb_or_color_temp` gelijk is aan \"rgb_color\"). 🌈",
+              "sleep_transition": "Duur van de overgang in seconden, als slaapstand wordt geactiveerd. 😴",
+              "sunrise_time": "Stel een vaste tijd (HH:MM:SS) in voor zonsopkomst. 🌅",
+              "min_sunrise_time": "Stel de tijd (HH:MM:SS) in voor de meest vroege virtuele zonsopkomst, maakt latere zonsopkomsten mogelijk. 🌅",
+              "max_sunrise_time": "Stel de tijd (HH:MM:SS) in voor de laatste virtuele zonsopkomst, maakt eerdere zonsopkomsten mogelijk. 🌅",
+              "sunrise_offset": "Pas de zonsopkomsttijd aan met een positieve of negatieve offset in seconden. ⏰",
+              "sunset_time": "Stel een vaste tijd (HH:MM:SS) in voor zonsondergang. 🌇",
+              "min_sunset_time": "Stel de tijd (HH:MM:SS) in voor de meest vroege virtuele zonsondergang, maakt latere zonsondergangen mogelijk. 🌇",
+              "max_sunset_time": "Stel de tijd (HH:MM:SS) in voor de laatste virtuele zonsondergang, maakt eerdere zonsondergangen mogelijk. 🌇",
+              "sunset_offset": "Pas de tijd van zonsondergang aan met een positieve of negatieve verschuiving in seconden. ⏰",
+              "brightness_mode": "Helderheidsmodus om te gebruiken. Mogelijke waarden zijn `default`, `linear` en `tanh` (gebruikt `brightness_mode_time_dark` en `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(Negeer wanneer `brightness_mode='default'`) De duur in seconden van oplopende/aflopende helderheid na/voor zonsopkomst/zonsondergang. 📈📉.",
+              "brightness_mode_time_light": "(Negeer wanneer `brightness_mode='default'`) De duur in seconden van oplopende/aflopende helderheid na/voor zonsopkomst/zonsondergang. 📈📉.",
+              "take_over_control_mode": "De adaptie pauzeermodus wanneer andere bronnen de helderheid en/of kleur van lampen veranderen. `pause_all` pauzeert altijd verandering van zowel helderheid als kleur. `pause_changed` pauzeert alleen de verandering van de extern veranderde eigenschappen en blijft onveranderde eigenschappen aanpassen, bijv. doorgaan met kleur veranderen als alleen helderheid extern is veranderd.",
+              "autoreset_control_seconds": "Herstel de handmatige bediening automatisch na een aantal seconden. Stel in op 0 om uit te schakelen.",
+              "send_split_delay": "Vertraging (ms) tussen `separate_turn_on_commands` voor lampen die geen gelijktijdige helderheids- en kleurinstelling ondersteunen. ⏲️",
+              "adapt_delay": "Wachttijd in (seconden) tussen het aanzetten van de lamp en het toepassen van Adaptieve verlichting veranderingen. Het kan helpen om knipperen tegen te gaan. ⏲️"
+            }
+          }
         }
       }
     },
@@ -53,5 +99,142 @@
       "option_error": "Ongeldige optie",
       "entity_missing": "Een of meer geselecteerde lichtentiteiten ontbreken in Home Assistant"
     }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "only_once": {
+          "description": "Pas lampen alleen aan wanneer ze zijn ingeschakeld (`true`) of blijf ze aanpassen (`false`). 🔄"
+        },
+        "sunrise_offset": {
+          "description": "Pas de tijd van zonsopkomst aan met een positieve of negatieve verschuiving in seconden. ⏰"
+        },
+        "sunset_offset": {
+          "description": "Pas de tijd van zonsondergang aan met een positieve of negatieve offset in seconden. ⏰"
+        },
+        "sleep_transition": {
+          "description": "Duur van de overgang in seconden, als slaapstand wordt geactiveerd. 😴"
+        },
+        "entity_id": {
+          "description": "entiteit_id van de schakelaar. 📝"
+        },
+        "transition": {
+          "description": "Duur van de overgang in seconden, als lampen aanpassen. 🕑"
+        },
+        "autoreset_control_seconds": {
+          "description": "Herstel de handmatige bediening na een aantal seconden. Stel in op 0 om uit te schakelen."
+        },
+        "sleep_brightness": {
+          "description": "Helderheidspercentage van lampen in slaapmodus. 😴"
+        },
+        "sleep_color_temp": {
+          "description": "Kleurtemperatuur in slaapmodus (gebruikt wanneer `sleep_rgb_or_color_temp` `color_temp` is) in Kelvin. 😴"
+        },
+        "max_color_temp": {
+          "description": "Koudste kleurtemperatuur in Kelvin. ❄️"
+        },
+        "initial_transition": {
+          "description": "Duur van de eerste overgang wanneer de lampen van `uit` naar `aan`gaan, in seconden. ⏲️"
+        },
+        "take_over_control": {
+          "description": "Schakel Adaptieve verlichting uit als een andere bron `light.turn_on` aanroept terwijl de lampen aan zijn en worden aangepast. Let op dit roept`homeassistant.update_entity` elke `interval`aan."
+        },
+        "detect_non_ha_changes": {
+          "description": "Detecteert en stopt aanpassingen voor niet-`light.turn_on` state veranderingen. `take_over_control` moet actief zijn. 🕵️ Let op:⚠️Sommige lampen kunnen incorrect een 'on' state weergeven, wat resulteert in lampen die onverwacht aan gaan. Schakel deze feature uit wanneer deze fout zich voordoet."
+        },
+        "max_sunrise_time": {
+          "description": "Stel de tijd (HH:MM:SS) in voor de laatste virtuele zonsopkomst, maakt eerdere zonsopkomsten mogelijk. 🌅"
+        },
+        "min_brightness": {
+          "description": "Minimale helderheid in procenten. 💡"
+        },
+        "min_color_temp": {
+          "description": "Meest warme kleurtemperatuur ins Kelvin. 🔥"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Gebruik één van beide `\"rgb_color\"` of `\"color_temp\"` in slaapstand. 🌙"
+        },
+        "turn_on_lights": {
+          "description": "Of de lampen moeten worden aangezet die momenteel uit zijn.🔆"
+        },
+        "sunrise_time": {
+          "description": "Stel een vaste tijd (HH:MM:SS) in voor zonsopkomst. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "Toon alle opties als attributen bij de schakelaar in Home Assistant wanneer ingesteld op `true`. 📝"
+        },
+        "max_brightness": {
+          "description": "Maximale helderheid in procenten. 💡"
+        },
+        "sleep_rgb_color": {
+          "description": "RGB kleur in slaapstand (wordt gebruikt wanneer `sleep_rgb_or_color_temp` gelijk is aan \"rgb_color\"). 🌈"
+        },
+        "adapt_delay": {
+          "description": "Wachttijd in (seconden) tussen het aanzetten van de lamp en het toepassen van Adaptieve verlichting veranderingen. Het kan helpen om knipperen tegen te gaan. ⏲️"
+        },
+        "use_defaults": {
+          "description": "Stelt niet gespecificeerde waarden in voor deze service call. Opties: \"current\" (standaard, behoudt huidige waarden), \"factory\" (herstelt de gedocumenteerde standaardwaarden), of \"configuration\" (zet instellingen terug naar de standaardwaarden in de configuratie ). ⚙️"
+        },
+        "separate_turn_on_commands": {
+          "description": "Gebruik aparte `light.turn_on` calls voor kleur en helderheid, dit is nodig voor bepaalde lampen. 🔀"
+        },
+        "prefer_rgb_color": {
+          "description": "Geef de voorkeur aan RGB kleuren boven de kleurtemperatuur van de lamp wanneer mogelijk. 🌈"
+        },
+        "send_split_delay": {
+          "description": "Vertraging (ms) tussen `separate_turn_on_commands` voor lampen die geen gelijktijdige helderheids- en kleurinstelling ondersteunen. ⏲️"
+        },
+        "sunset_time": {
+          "description": "Stel een vaste tijd (HH:MM:SS) in voor zonsondergang. 🌇"
+        },
+        "min_sunset_time": {
+          "description": "Stel de tijd (HH:MM:SS) in voor de meest vroege virtuele zonsondergang, maakt latere zonsondergangen mogelijk. 🌇"
+        },
+        "take_over_control_mode": {
+          "description": "De adaptie pauzeermodus wanneer andere bronnen de helderheid en/of kleur van lampen veranderen. `pause_all` pauzeert altijd verandering van zowel helderheid als kleur. `pause_changed` pauzeert alleen de verandering van de extern veranderde eigenschappen en blijft onveranderde eigenschappen aanpassen, bijv. doorgaan met kleur veranderen als alleen helderheid extern is veranderd."
+        }
+      },
+      "description": "Wijzig alle gewenste instellingen in de schakelaar. Alle opties hier zijn hetzelfde als in de configuratie."
+    },
+    "apply": {
+      "fields": {
+        "lights": {
+          "description": "Een lamp (of een lijst van lampen) waarop de instellingen worden toegepast."
+        },
+        "transition": {
+          "description": "Duur van de overgang in seconden, als lampen aanpassen. 🕑"
+        },
+        "entity_id": {
+          "description": "De `entity_id` van de schakelaar met de toe te passen instellingen. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Of de helderheid van het licht moet worden aangepast. 🌞"
+        },
+        "turn_on_lights": {
+          "description": "Of de lampen moeten worden aangezet die momenteel uit zijn.🔆"
+        },
+        "adapt_color": {
+          "description": "Aanpassen aan de kleur van de omringende verlichting. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Geef de voorkeur aan RGB kleuren boven de kleurtemperatuur van de lamp wanneer mogelijk. 🌈"
+        }
+      },
+      "description": "Past de huidige Adaptieve verlichting instellingen toe op de lampen."
+    },
+    "set_manual_control": {
+      "fields": {
+        "lights": {
+          "description": "entiteit_id(s) van de lamp(en), indien niets wordt gespecificeerd, worden alle lampen in de schakelaar geselecteerd. 💡"
+        },
+        "manual_control": {
+          "description": "Of de lamp moet worden toegevoegd (`\"true\"`) of verwijderd (`\"false\"`) van de `manual_control` lijst. 🔒"
+        },
+        "entity_id": {
+          "description": "De `entity_id` van de schakelaar waarvan het licht moet worden (on)gemarkeerd als  `manually controlled`. 📝"
+        }
+      },
+      "description": "Geef aan of een lamp 'manually controlled' is."
+    }
   }
 }

custom_components/adaptive_lighting/translations/pl.json

@@ -3,8 +3,8 @@
   "config": {
     "step": {
       "user": {
-        "title": "Wybierz nazwę grupy dla Adaptacyjnego oświetlenia",
-        "description": "Wybierz nazwę dla grupy. Możesz użyć wiele grup Adaptacyjnego oświetlenia, każda może mieć dowolną konfigurację świateł!",
+        "title": "Wybierz nazwę dla tej instancji Adaptacyjnego oświetlenia",
+        "description": "Każda instancja może zawierać wiele świateł.",
         "data": {
           "name": "Nazwa"
         }
@@ -17,35 +17,207 @@
   "options": {
     "step": {
       "init": {
-        "title": "Adaptacyjne oświetlenie opcje",
-        "description": "Wszystkie ustawienia dla Adaptacyjnego oświetlenia. Nazwy opcji odpowiadają ustawieniom YAML. Żadne opcje nie są wyświetlane, jeśli masz wpis adaptive_lighting zdefiniowany w konfiguracji YAML.",
+        "title": "Opcje adaptacyjnego oświetlenia",
+        "description": "Konfiguracja komponentu Adaptacyjnego oświetlenia. Nazwy opcji odpowiadają ustawieniom YAML. Żadne opcje nie są wyświetlane, jeśli są zdefiniowane w konfiguracji YAML. Aby zobaczyć interaktywne wykresy demonstrujące działanie parametrów odwiedź [tą aplikację webową]({webapp_url}). Aby zobaczyć więcej szczegółów odwiedź [oficjalną dokumentację]({docs_url}).",
         "data": {
-          "lights": "światła",
-          "initial_transition": "initial_transition: When lights turn 'off' to 'on'. (sekund)",
-          "sleep_transition": "sleep_transition: When 'sleep_state' changes. (sekund)",
+          "lights": "lights: Lista `entity_id`, które mają być kontrolowane (może być pusta). 🌟",
           "interval": "interval: Time between switch updates. (sekund)",
-          "max_brightness": "max_brightness: Highest brightness of lights during a cycle. (%)",
-          "max_color_temp": "max_color_temp: Coldest hue of the color temperature cycle. (Kelvin)",
-          "min_brightness": "min_brightness: Lowest brightness of lights during a cycle. (%)",
-          "min_color_temp": "min_color_temp, Warmest hue of the color temperature cycle. (Kelvin)",
-          "only_once": "only_once: Only adapt the lights when turning them on.",
-          "prefer_rgb_color": "prefer_rgb_color: Use 'rgb_color' rather than 'color_temp' when possible.",
-          "separate_turn_on_commands": "separate_turn_on_commands: Separate the commands for each attribute (color, brightness, etc.) in 'light.turn_on' (required for some lights).",
+          "transition": "Transition time when applying a change to the lights (sekund)",
+          "min_brightness": "min_brightness: Minimalna jasność (w procentach). 💡",
+          "max_brightness": "max_brightness: Maksymalna jasność (w procentach). 💡",
+          "min_color_temp": "min_color_temp: Najcieplejsza temperatura barwowa (w Kelwinach). 🔥",
+          "max_color_temp": "max_color_temp: Najzimniejsza temperatura barwowa (w Kelwinach). ❄️",
           "sleep_brightness": "sleep_brightness, Brightness setting for Sleep Mode. (%)",
-          "sleep_color_temp": "sleep_color_temp: Color temperature setting for Sleep Mode. (Kelvin)",
-          "sunrise_offset": "sunrise_offset: How long before(-) or after(+) to define the sunrise point of the cycle (+/- sekund)",
-          "sunrise_time": "sunrise_time: Manual override of the sunrise time, if 'None', it uses the actual sunrise time at your location (HH:MM:SS)",
-          "sunset_offset": "sunset_offset: How long before(-) or after(+) to define the sunset point of the cycle (+/- sekund)",
-          "sunset_time": "sunset_time: Manual override of the sunset time, if 'None', it uses the actual sunset time at your location (HH:MM:SS)",
-          "take_over_control": "take_over_control: If anything but Adaptive Lighting calls 'light.turn_on' when a light is already on, stop adapting that light until it (or the switch) toggles off -> on.",
-          "detect_non_ha_changes": "detect_non_ha_changes: detects all >10% changes made to the lights (also outside of HA), requires 'take_over_control' to be enabled (calls 'homeassistant.update_entity' every 'interval'!)",
-          "transition": "Transition time when applying a change to the lights (sekund)"
+          "sleep_color_temp": "sleep_color_temp: Color temperature setting for Sleep Mode. (Kelvin)"
+        },
+        "data_description": {
+          "interval": "Częstotliwość adaptacji świateł w sekundach. 🔄",
+          "transition": "Długość przejścia do nowego stanu (w sekundach). 🕑",
+          "sleep_brightness": "Jasność świateł w trybie spania (w procentach). 😴",
+          "sleep_color_temp": "Temperatura barwowa w trybie spania (używane gdy `sleep_rgb_or_color_temp` jest `color_temp`) (w Kelwinach). 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition: When lights turn 'off' to 'on'. (sekund)",
+              "prefer_rgb_color": "prefer_rgb_color: Czy w miarę możliwości preferować regulację kolorów RGB zamiast regulacji temperatury barwowej światła. 🌈",
+              "sleep_transition": "sleep_transition: When 'sleep_state' changes. (sekund)",
+              "transition_until_sleep": "transition_until_sleep: Gdy włączone, Adaptacyjne oświetlenie będzie traktowało ustawienia spania jako minimalne i przejdzie do nich po zachodzie słońca. 🌙",
+              "sunrise_time": "sunrise_time: Manual override of the sunrise time, if 'None', it uses the actual sunrise time at your location (HH:MM:SS)",
+              "sunrise_offset": "sunrise_offset: How long before(-) or after(+) to define the sunrise point of the cycle (+/- sekund)",
+              "sunset_time": "sunset_time: Manual override of the sunset time, if 'None', it uses the actual sunset time at your location (HH:MM:SS)",
+              "sunset_offset": "sunset_offset: How long before(-) or after(+) to define the sunset point of the cycle (+/- sekund)",
+              "take_over_control": "take_over_control: Wyłącz adaptowanie oświetlenia, kiedy inna usługa wywoła `light.turn_on`, gdy oświetlenie jest już włączone. Zauważ, że to wywołuje `homeassistant.update_entity` co`interval`! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: Wykrywa i zatrzymuje adaptacje oświetlenia przy zmianach nie pochodzących od `light.turn_on`. Wymaga aktywnego `take_over_control`. 🕵️ Uwaga: ⚠️ Niektóre światła mogą błędnie wskazywać stan \"on\", co może powodować nieoczekiwane włączanie się świateł. Wyłącz to ustawienie, jeżeli doświadczasz takich objawów.",
+              "only_once": "only_once: Adaptuj światło tylko podczas włączenia (`true`) lub adaptuj cały czas (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Gdy włączone (`true`) to adaptacyjne oświetlenie zastosuje adaptacje tylko jeżeli `light.turn_on` jest wywołane bez konkretnego koloru lub jasności. ❌🌈 To ustawienie zapobiega między innymi adaptacji, gdy aktywowana jest scena. Gdy wyłączone (`false`), adaptacyjne oświetlenie zastosuje adaptacje niezależnie czy `service_data` zawiera kolor lub jasność. Potrzebuje włączonej opcji `take_over_control`. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Używaj oddzielnych wywołań `light.turn_on` dla koloru i jasności, wymagane dla niektórych typów świateł. 🔀",
+              "skip_redundant_commands": "skip_redundant_commands: Pomiń wysyłanie polecenia adaptacji, jeżeli stan światła jest taki sam jak docelowy stan adaptacji. Minimalizuje to ruch sieciowy oraz w niektórych przypadkach poprawia szybkość działania. 📉 Wyłącz, jeżeli faktyczny stan światła się nie pokrywa z tym który widnieje w Home Assistant.",
+              "intercept": "intercept: Przechwyć i zaadaptuj wywołanie `light.turn_on`, aby błyskawicznie dostosować kolor i jasność. 🏎️ Wyłącz dla świateł, które nie akceptują wywołania `light.turn_on` zawierającego kolor i jasność.",
+              "multi_light_intercept": "multi_light_intercept: Przechwyć i zaadaptuj wywołanie `light.turn_on`, które dotyczą wielu świateł. ➗⚠️ Może to powodować rozdzielenie pojedynczego wywołania `light.turn_on` na wiele wywołań, na przykład gdy światła są przypisane do rożnych instancji. Wymaga włączonej opcji `intercept`.",
+              "include_config_in_attributes": "include_config_in_attributes: Gdy włączone (`true`) pokaż ustawienia jako atrybuty w encji przełącznika w Home Assistant. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Długość pierwszego przejścia, gdy światło zostanie przełączone z `off` na `on` (w sekundach). ⏲️",
+              "sleep_rgb_or_color_temp": "Użyj `\"rgb_color\"` albo `\"color_temp\"` w trybie spania. 🌙",
+              "sleep_rgb_color": "Kolor RGB w trybie spania (używane, gdy `sleep_rgb_or_color_temp` jest `rgb_color`). 🌈",
+              "sleep_transition": "Długość przejścia, gdy nastąpi włączenie/wyłączenie \"trybu spania\" (w sekundach). 😴",
+              "sunrise_time": "Ustaw stały czas wschodu słońca (HH:MM:SS). 🌅",
+              "min_sunrise_time": "Ustaw czas najwcześniejszego wirtualnego wschodu słońca (HH:MM:SS), pozwala na opóźnienie wschodu słońca. 🌅",
+              "max_sunrise_time": "Ustaw czas najpóźniejszego wirtualnego wschodu słońca (HH:MM:SS), pozwala na przyspieszenie wschodu słońca. 🌅",
+              "sunrise_offset": "Dostosuj czas wschodu słońca - przesunięcie o +/- sekund. ⏰",
+              "sunset_time": "Ustaw stały czas zachodu słońca (HH:MM:SS). 🌇",
+              "min_sunset_time": "Ustaw czas najwcześniejszego wirtualnego zachodu słońca (HH:MM:SS), pozwala na opóźnienie zachodu słońca. 🌇",
+              "max_sunset_time": "Ustaw czas najpóźniejszego wirtualnego zachodu słońca (HH:MM:SS), pozwala na przyspieszenie zachodu słońca. 🌇",
+              "sunset_offset": "Dostosuj czas zachodu słońca - przesunięcie o +/- sekund. ⏰",
+              "brightness_mode": "Tryb ustawiania jasności. Dostępne opcje to `default`, `linear` i `tanh` (używa `brightness_mode_time_dark` i `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(Pomijany, gdy `brightness_mode='default'`). Czas w sekundach, kiedy jasność będzie zwiększana przed wschodem słońca/zmniejszana po zachodzie słońca. 📈📉",
+              "brightness_mode_time_light": "(Pomijany, gdy `brightness_mode='default'`). Czas w sekundach, kiedy jasność będzie zwiększana po wschodzie słońca/zmniejszana przed zachodem słońca. 📈📉",
+              "autoreset_control_seconds": "Czas, po którym manualna kontrola zostanie wyłączona (w sekundach). Ustaw 0, aby wyłączyć. ⏲️",
+              "send_split_delay": "Opóźnienie (w ms) pomiędzy `separate_turn_on_commands` dla świateł, które nie akceptują jednoczesnego ustawiania jasności i koloru. ⏲️",
+              "adapt_delay": "Czas (w sekundach) pomiędzy włączeniem światła, a rozpoczęciem adaptowania przez Adaptacyjne oświetlenie. Może pomóc zredukować migotanie. ⏲️"
+            }
+          }
         }
       }
     },
     "error": {
-      "option_error": "Błędne opcje",
-      "entity_missing": "Nie znaleziono wybranego światła"
+      "option_error": "Błędna opcja",
+      "entity_missing": "Jednego lub więcej wybranych świateł nie można znaleźć w Home Assistant"
+    }
+  },
+  "services": {
+    "apply": {
+      "description": "Stosuje bieżące ustawienia Adaptacyjnego oświetlenia do świateł.",
+      "fields": {
+        "entity_id": {
+          "description": "`entity_id` przełącznika, którego ustawienia mają być zastosowane. 📝"
+        },
+        "lights": {
+          "description": "Światło (albo lista świateł), do których mają być zastosowane ustawienia. 💡"
+        },
+        "transition": {
+          "description": "Długość przejścia do nowego stanu (w sekundach). 🕑"
+        },
+        "adapt_color": {
+          "description": "Czy adaptować kolor światła. 🌈"
+        },
+        "adapt_brightness": {
+          "description": "Czy adaptować jasność światła. 🌞"
+        },
+        "prefer_rgb_color": {
+          "description": "Czy w miarę możliwości preferować regulację kolorów RGB zamiast temperatury barwowej światła. 🌈"
+        },
+        "turn_on_lights": {
+          "description": "Czy włączyć światła, które są aktualnie wyłączone? 🔆"
+        }
+      }
+    },
+    "set_manual_control": {
+      "description": "Zaznacza czy światło jest \"ręcznie sterowane\".",
+      "fields": {
+        "entity_id": {
+          "description": "`entity_id` encji przełącznika, w której należy zaznaczyć/odznaczyć flagę `ręczne sterowanie`. 📝"
+        },
+        "lights": {
+          "description": "`entity_id` świateł, dla których należy odznaczyć flagę `ręczne sterowanie`. 💡Gdy lista będzie pusta wszystkie światła będą brane pod uwagę."
+        },
+        "manual_control": {
+          "description": "Czy dodać (\"true\"), czy usunąć (\"false\") światło z listy \"ręczne sterowanie\". 🔒"
+        }
+      }
+    },
+    "change_switch_settings": {
+      "description": "Zmienia dowolny parametr w przełączniku. Wszystkie opcje są takie same jak w konfiguracji.",
+      "fields": {
+        "entity_id": {
+          "description": "ID encji przełącznika. 📝"
+        },
+        "use_defaults": {
+          "description": "Jak mają się zmienić ustawienia, które nie są wyszczególnione w tym wywołaniu. Opcje: \"current\" (domyślne, pozostawia obecne ustawienia), \"factory\" (przywraca ustawienia z dokumentacji), albo \"configuration\" (przywraca wartości z konfiguracji przełącznika). ⚙️"
+        },
+        "include_config_in_attributes": {
+          "description": "Gdy włączone (`true`) pokaż ustawienia jako atrybuty w encji przełącznika w Home Assistant."
+        },
+        "sleep_transition": {
+          "description": "Długość przejścia, gdy nastąpi włączenie/wyłączenie \"trybu spania\" (w sekundach). 😴"
+        },
+        "max_brightness": {
+          "description": "Maksymalna jasność (w procentach). 💡"
+        },
+        "turn_on_lights": {
+          "description": "Czy włączyć światła, które są aktualnie wyłączone? 🔆"
+        },
+        "initial_transition": {
+          "description": "Długość pierwszego przejścia, gdy światło zostanie przełączone z `off` na `on` (w sekundach). ⏲️"
+        },
+        "min_sunset_time": {
+          "description": "Ustaw czas najwcześniejszego wirtualnego zachodu słońca (HH:MM:SS), pozwala na opóźnienie zachodu słońca. 🌇"
+        },
+        "take_over_control": {
+          "description": "Wyłącz adaptowanie oświetlenia, kiedy inna usługa wywoła `light.turn_on`, gdy oświetlenie jest już włączone. Zauważ, że to wywołuje `homeassistant.update_entity` co `interval`! 🔒"
+        },
+        "transition": {
+          "description": "Długość przejścia do nowego stanu (w sekundach). 🕑"
+        },
+        "autoreset_control_seconds": {
+          "description": "Czas, po którym manualna kontrola zostanie wyłączona (w sekundach). Ustaw 0 aby wyłączyć. ⏲️"
+        },
+        "adapt_delay": {
+          "description": "Czas (w sekundach) pomiędzy włączeniem światła, a rozpoczęciem adaptowania przez Adaptacyjne oświetlenie. Może pomóc zredukować migotanie. ⏲️"
+        },
+        "max_color_temp": {
+          "description": "Najzimniejsza temperatura barwowa (w Kelwinach). ❄️"
+        },
+        "min_brightness": {
+          "description": "Minimalna jasność (w procentach). 💡"
+        },
+        "min_color_temp": {
+          "description": "Najcieplejsza temperatura barwowa (w Kelwinach). 🔥"
+        },
+        "only_once": {
+          "description": "Adaptuj światło tylko podczas włączania (`true`) lub adaptuj cały czas (`false`). 🔄"
+        },
+        "prefer_rgb_color": {
+          "description": "Czy w miarę możliwości preferować regulację kolorów RGB zamiast temperatury barwowej światła. 🌈"
+        },
+        "separate_turn_on_commands": {
+          "description": "Używaj oddzielnych wywołań `light.turn_on` dla koloru i jasności, wymagane dla niektórych typów świateł. 🔀"
+        },
+        "send_split_delay": {
+          "description": "Opóźnienie (w ms) pomiędzy `separate_turn_on_commands` dla świateł, które nie akceptują jednoczesnego ustawiania jasności i koloru. ⏲️"
+        },
+        "sleep_brightness": {
+          "description": "Jasność świateł w trybie spania (w procentach). 😴"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Użyj `\"rgb_color\"` albo `\"color_temp\"` w trybie spania. 🌙"
+        },
+        "sleep_rgb_color": {
+          "description": "Kolor RGB w trybie spania (używane, gdy `sleep_rgb_or_color_temp` jest `rgb_color`). 🌈"
+        },
+        "sleep_color_temp": {
+          "description": "Temperatura barwowa w trybie spania (używane gdy `sleep_rgb_or_color_temp` jest `color_temp`) (w Kelwinach). 😴"
+        },
+        "sunrise_offset": {
+          "description": "Dostosuj czas wschodu słońca - przesunięcie o +/- sekund. ⏰"
+        },
+        "sunrise_time": {
+          "description": "Ustaw stały czas wschodu słońca (HH:MM:SS). 🌅"
+        },
+        "sunset_offset": {
+          "description": "Dostosuj czas zachodu słońca - przesunięcie o +/- sekund. ⏰"
+        },
+        "sunset_time": {
+          "description": "Ustaw stały czas zachodu słońca (HH:MM:SS). 🌇"
+        },
+        "max_sunrise_time": {
+          "description": "Ustaw czas najpóźniejszego wirtualnego wschodu słońca (HH:MM:SS), pozwala na przyspieszenie wschodu słońca. 🌅"
+        },
+        "detect_non_ha_changes": {
+          "description": "Wykrywa i zatrzymuje adaptacje oświetlenia przy zmianach nie pochodzących od `light.turn_on`. Wymaga aktywnego `take_over_control`. 🕵️ Uwaga: ⚠️ Niektóre światła mogą błędnie wskazywać stan \"on\", co może powodować nieoczekiwane włączanie się świateł. Wyłącz to ustawienie, jeżeli doświadczasz takich objawów."
+        }
+      }
     }
   }
 }

custom_components/adaptive_lighting/translations/pt-BR.json

@@ -8,6 +8,13 @@
         "data": {
           "name": "Nome"
         }
+      },
+      "menu": {
+        "data": {
+          "action": "Ação"
+        },
+        "description": "Você deseja criar uma nova instância ou duplicar uma já existente?",
+        "title": "Criar ou Duplicar"
       }
     },
     "abort": {
@@ -21,25 +28,58 @@
         "description": "Todas as configurações de um componente de iluminação adaptativa. Os nomes das opções correspondem às configurações de YAML. Nenhuma opção será exibida se você tiver a entrada adaptive_lighting definida em sua configuração YAML.",
         "data": {
           "lights": "luzes",
-          "initial_transition": "initial_transition: Quando as luzes mudam de 'off' para 'on'. (segundos)",
-          "sleep_transition": "sleep_transition: Quando 'sleep_state' muda. (segundos)",
           "interval": "interval: Tempo entre as atualizações do switch. (segundos)",
-          "max_brightness": "max_brightness: Maior brilho das luzes durante um ciclo. (%)",
-          "max_color_temp": "max_color_temp: Matiz mais frio do ciclo de temperatura de cor. (Kelvin)",
+          "transition": "Tempo de transição ao aplicar uma mudança nas luzes (segundos)",
           "min_brightness": "min_brightness: Menor brilho das luzes durante um ciclo. (%)",
+          "max_brightness": "max_brightness: Maior brilho das luzes durante um ciclo. (%)",
           "min_color_temp": "min_color_temp, matiz mais quente do ciclo de temperatura de cor. (Kelvin)",
-          "only_once": "only_once: Apenas adapte as luzes ao ligá-las.",
-          "prefer_rgb_color": "prefer_rgb_color: Use 'rgb_color' em vez de 'color_temp' quando possível.",
-          "separate_turn_on_commands": "separar_turn_on_commands: Separe os comandos para cada atributo (cor, brilho, etc.) em 'light.turn_on' (necessário para algumas luzes).",
+          "max_color_temp": "max_color_temp: Matiz mais frio do ciclo de temperatura de cor. (Kelvin)",
           "sleep_brightness": "sleep_brightness, configuração de brilho para o modo de suspensão. (%)",
-          "sleep_color_temp": "sleep_color_temp: configuração de temperatura de cor para o modo de suspensão. (Kelvin)",
-          "sunrise_offset": "sunrise_offset: Quanto tempo antes (-) ou depois (+) para definir o ponto do nascer do sol do ciclo (+/- segundos)",
-          "sunrise_time": "sunrise_time: substituição manual do horário do nascer do sol, se 'Nenhum', ele usa o horário real do nascer do sol em sua localização (HH:MM:SS)",
-          "sunset_offset": "Sunset_offset: Quanto tempo antes (-) ou depois (+) para definir o ponto de pôr do sol do ciclo (+/- segundos)",
-          "sunset_time": "sunset_time: substituição manual do horário do pôr do sol, se 'Nenhum', ele usa o horário real do nascer do sol em sua localização (HH:MM:SS)",
-          "take_over_control": "take_over_control: Se qualquer coisa, exceto Adaptive Lighting, chamar 'light.turn_on' quando uma luz já estiver acesa, pare de adaptar essa luz até que ela (ou o interruptor) desligue -> ligue.",
-          "detect_non_ha_changes": "detect_non_ha_changes: detecta todas as alterações > 10% feitas nas luzes (também fora do HA), requer que 'take_over_control' seja ativado (chama 'homeassistant.update_entity' a cada 'intervalo'!)",
-          "transition": "Tempo de transição ao aplicar uma mudança nas luzes (segundos)"
+          "sleep_color_temp": "sleep_color_temp: configuração de temperatura de cor para o modo de suspensão. (Kelvin)"
+        },
+        "data_description": {
+          "interval": "Frequência, em segundos, para adaptar as luzes. 🔄",
+          "transition": "Duração da transição, em segundos, quando as luzes mudam. 🕑",
+          "sleep_brightness": "Porcentagem do brilho das luzes no modo dormir. 😴",
+          "sleep_color_temp": "Temperatura de Cor no modo dormir (usado quando `sleep_rgb_or_color_temp` é `color_temp`) em Kelvin. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition: Quando as luzes mudam de 'off' para 'on'. (segundos)",
+              "prefer_rgb_color": "prefer_rgb_color: Use 'rgb_color' em vez de 'color_temp' quando possível.",
+              "sleep_transition": "sleep_transition: Quando 'sleep_state' muda. (segundos)",
+              "transition_until_sleep": "transition_until_sleep: Quando ativada, a Iluminação Adaptativa considerará as configurações de sono como o valor mínimo, transicionando para esses valores após o pôr do sol. 🌙",
+              "sunrise_time": "sunrise_time: substituição manual do horário do nascer do sol, se 'Nenhum', ele usa o horário real do nascer do sol em sua localização (HH:MM:SS)",
+              "sunrise_offset": "sunrise_offset: Quanto tempo antes (-) ou depois (+) para definir o ponto do nascer do sol do ciclo (+/- segundos)",
+              "sunset_time": "sunset_time: substituição manual do horário do pôr do sol, se 'Nenhum', ele usa o horário real do nascer do sol em sua localização (HH:MM:SS)",
+              "sunset_offset": "Sunset_offset: Quanto tempo antes (-) ou depois (+) para definir o ponto de pôr do sol do ciclo (+/- segundos)",
+              "take_over_control": "take_over_control: Se qualquer coisa, exceto Adaptive Lighting, chamar 'light.turn_on' quando uma luz já estiver acesa, pare de adaptar essa luz até que ela (ou o interruptor) desligue -> ligue.",
+              "detect_non_ha_changes": "detect_non_ha_changes: detecta todas as alterações > 10% feitas nas luzes (também fora do HA), requer que 'take_over_control' seja ativado (chama 'homeassistant.update_entity' a cada 'intervalo'!)",
+              "only_once": "only_once: Apenas adapte as luzes ao ligá-las.",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Ao ligar as luzes inicialmente. Se definido como `true`, a Iluminação Adaptativa se adapta somente se o comando `light.turn_on` for chamado sem especificar cor ou brilho. ❌🌈 Isso, por exemplo, impede a adaptação ao ativar uma cena. Se false, a Iluminação Adaptativa se adapta independentemente da presença de cor ou brilho nos dados iniciais do `service_data`. Precisa de `take_over_control` ativado. 🕵️",
+              "separate_turn_on_commands": "separar_turn_on_commands: Separe os comandos para cada atributo (cor, brilho, etc.) em 'light.turn_on' (necessário para algumas luzes).",
+              "skip_redundant_commands": "skip_redundant_commands: Deixar de enviar comandos de adaptação cujo estado alvo já seja igual ao estado atual da luz. Minimiza o tráfego de rede e melhora a responsividade da adaptação em algumas situações. 📉Desative se os estados físicos das luzes podem ficar diferentes do estado registrado no HA.",
+              "intercept": "intercept: Interceptar e adaptar os chamados `light.turn_on` para ativar a adaptação instantânea de cor e brilho. 🏎️ Desative para luzes que não suportam `light.turn_on` com cor e brilho.",
+              "multi_light_intercept": "multi_light_intercept: Interceptar e adaptar chamadas de 'light.turn_on' que visem múltiplas luzes. ➗⚠️ Isso pode resultar na divisão de uma única chamada de 'light.turn_on' em múltiplas chamadas, por exemplo, quando as luzes estão em interruptores diferentes. Exige que 'intercept' esteja ativado.",
+              "include_config_in_attributes": "include_config_in_attributes: Mostra todas as opções como atributos no interruptor do Home Assistant quando está definido para `true`. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Duração da primeira transição, em segundos, quando as luzes alternarem de 'desligado' para 'ligado'. ⏲️",
+              "sleep_rgb_or_color_temp": "Use `\"rgb_color\"` ou `\"color_temp\"` no modo dormir. 🌙",
+              "sleep_transition": "Duração da transição em segundos quando o modo dormir é alterado. 😴",
+              "sunrise_time": "Define um horário fixo (HH:MM:SS) para o nascer do sol. 🌅",
+              "min_sunrise_time": "Defina o horário virtual mais cedo do nascer do sol (HH:MM:SS), permitindo nasceres do sol mais tarde. 🌅",
+              "max_sunrise_time": "Defina o horário virtual mais recente do nascer do sol (HH:MM:SS), permitindo nasceres do sol mais cedo. 🌅",
+              "sunrise_offset": "Ajusta o horário do nascer do sol com um deslocamento positivo ou negativo em segundos. ⏰",
+              "sunset_time": "Definir um horário fixo (HH:MM:SS) para o pôr do sol. 🌇",
+              "min_sunset_time": "Defina o horário virtual mais cedo do pôr do sol (HH:MM:SS), permitindo pores do sol mais tarde. 🌇",
+              "max_sunset_time": "Defina o horário virtual mais recente do pôr do sol (HH:MM:SS), permitindo pores do sol mais cedo. 🌇",
+              "sunset_offset": "Ajusta o horário do pôr do sol com um deslocamento positivo ou negativo em segundos. ⏰",
+              "autoreset_control_seconds": "Redefine automaticamente o controle manual após um período de tempo definido em segundos. Defina 0 para desabilitar. ⏲️",
+              "adapt_delay": "Tempo de espera (segundos) entre a luz ligar e a aplicação das mudanças da iluminação adaptativa. Pode ajudar a evitar que a luz pisque. ⏲️"
+            }
+          }
         }
       }
     },
@@ -47,5 +87,106 @@
       "option_error": "Opção inválida",
       "entity_missing": "Uma luz selecionada não foi encontrada"
     }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sleep_transition": {
+          "description": "Duração da transição em segundos quando o \"modo dormir\" é alternado. 😴"
+        },
+        "entity_id": {
+          "description": "ID da entidade do switch. 📝"
+        },
+        "max_brightness": {
+          "description": "Porcentagem máxima do brilho. 💡"
+        },
+        "autoreset_control_seconds": {
+          "description": "Redefine automaticamente o controle manual após um período de tempo definido em segundos. Defina 0 para desabilitar. ⏲️"
+        },
+        "transition": {
+          "description": "Duração da transição, em segundos, quando as luzes mudam. 🕑"
+        },
+        "sleep_brightness": {
+          "description": "Porcentagem do brilho das luzes no modo dormir. 😴"
+        },
+        "turn_on_lights": {
+          "description": "Se deve ligar as luzes que estão atualmente desligadas. 🔆"
+        },
+        "initial_transition": {
+          "description": "Duração da primeira transição, em segundos, quando as luzes alternarem de 'desligado' para 'ligado'. ⏲️"
+        },
+        "sunset_offset": {
+          "description": "Ajusta o horário do pôr do sol com um deslocamento positivo ou negativo em segundos. ⏰"
+        },
+        "sunrise_offset": {
+          "description": "Ajusta o horário do nascer do sol com um deslocamento positivo ou negativo em segundos. ⏰"
+        },
+        "sunset_time": {
+          "description": "Definir um horário fixo (HH:MM:SS) para o pôr do sol. 🌇"
+        },
+        "max_color_temp": {
+          "description": "Temperatura de cor mais fria em Kelvin. ❄️"
+        },
+        "sleep_color_temp": {
+          "description": "Temperatura de Cor no modo dormir (usado quando `sleep_rgb_or_color_temp` é `color_temp`) em Kelvin. 😴"
+        },
+        "sunrise_time": {
+          "description": "Define um horário fixo (HH:MM:SS) para o nascer do sol. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "Exibe todas as opções como atributos no interruptor no Home Assistant quando definido para `true`. 📝"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Use `\"rgb_color\"` ou `\"color_temp\"` no modo dormir. 🌙"
+        },
+        "adapt_delay": {
+          "description": "Tempo de espera (segundos) entre a luz ligar e a aplicação das mudanças da iluminação adaptativa. Pode ajudar a evitar que a luz pisque. ⏲️"
+        },
+        "separate_turn_on_commands": {
+          "description": "Usa chamada separada de `light.turn_on` para cor e brilho, necessário para alguns tipos de luz. 🔀"
+        },
+        "use_defaults": {
+          "description": "Define os valores padrão não especificados nessa chamada de serviço. Opções: \"current\" (padrão, mantém os valores atuais), \"factory\" (reinicia para os padrões documentados) ou \"configuration\" (retorna aos padrões de configuração do interruptor). ⚙️"
+        },
+        "max_sunrise_time": {
+          "description": "Defina o horário virtual mais recente do nascer do sol (HH:MM:SS), permitindo nasceres do sol mais cedo. 🌅"
+        },
+        "min_sunset_time": {
+          "description": "Defina o horário virtual mais cedo do pôr do sol (HH:MM:SS), permitindo pores do sol mais tarde. 🌇"
+        }
+      },
+      "description": "Altere quaisquer configurações que você quiser . Todas as opções aqui são as mesmas que no fluxo de configuração."
+    },
+    "apply": {
+      "fields": {
+        "turn_on_lights": {
+          "description": "Se deve ligar as luzes que estão atualmente desligadas. 🔆"
+        },
+        "lights": {
+          "description": "Uma luz (ou lista de luzes) para aplicar as configurações. 💡"
+        },
+        "transition": {
+          "description": "Duração da transição, em segundos, quando as luzes mudam. 🕑"
+        },
+        "entity_id": {
+          "description": "O 'entity_id' do interruptor com as configurações para aplicar. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Se deve adaptar o brilho da luz. 🌞"
+        },
+        "adapt_color": {
+          "description": "Se deve adaptar a cor das luzes que suportam este recurso.  🌈"
+        }
+      },
+      "description": "Aplica as configurações atuais de iluminação adaptativa nas luzes."
+    },
+    "set_manual_control": {
+      "description": "Marque se uma luz é 'controlada manualmente'.",
+      "fields": {
+        "lights": {
+          "description": "entity_id(s) das luzes, se não especificadas, todas as luzes do interruptor são selecionadas. 💡"
+        }
+      }
+    }
   }
 }

custom_components/adaptive_lighting/translations/pt.json

@@ -0,0 +1,100 @@
+{
+  "title": "Iluminação Adaptativa",
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sunrise_offset": {
+          "description": "Ajustar a hora do nascer do sol com um offset  positivo ou negativo em segundos. ⏰"
+        },
+        "only_once": {
+          "description": "Adaptar as luzes apenas quando estas estão ligadas (`true`) ou continuar a adaptá-las (`false`)."
+        },
+        "sunset_offset": {
+          "description": "Ajustar a hora do pôr do sol com um offset  positivo ou negativo em segundos. ⏰"
+        },
+        "turn_on_lights": {
+          "description": "Para ligar luzes que estão neste momento desligadas. 🔆"
+        },
+        "entity_id": {
+          "description": "ID Entidade do interruptor. 📝"
+        },
+        "sleep_transition": {
+          "description": "Duração da transição quando o \"modo dormir\" é alternado em segundos. 😴"
+        },
+        "autoreset_control_seconds": {
+          "description": "Reiniciar o controlo manual automaticamente após um número de segundos. Definir 0 para desativar. ⏲️"
+        },
+        "transition": {
+          "description": "Duração da transição quando as luzes mudam, em segundos. 🕑"
+        },
+        "max_color_temp": {
+          "description": "Cor mais fria em Kelvin. ❄️"
+        },
+        "sleep_brightness": {
+          "description": "Porcentagem do brilho da lâmpadas no modo \"sleep mode\"."
+        }
+      },
+      "description": "Muda alguma configuração que você quiser no interruptor. Todas as opções aqui são as mesmas que estão no processo de configuração."
+    },
+    "apply": {
+      "description": "Aplica as definições atuais da Iluminação Adaptativa às luzes.",
+      "fields": {
+        "lights": {
+          "description": "Uma luz (ou lista de luzes) para a qual serão aplicadas as definições.💡"
+        },
+        "transition": {
+          "description": "Duração da transição quando as luzes mudam, em segundos. 🕑"
+        }
+      }
+    }
+  },
+  "config": {
+    "abort": {
+      "already_configured": "Este dispositivo já está configurado"
+    },
+    "step": {
+      "user": {
+        "description": "Cada instância pode conter múltiplas luzes!",
+        "title": "Escolha um nome para a instância de Iluminação Adaptativa"
+      }
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "data_description": {
+          "transition": "Duração da transição quando as luzes mudam, em segundos. 🕑",
+          "sleep_brightness": "Porcentagem do brilho da lâmpadas no modo \"sleep mode\"."
+        },
+        "title": "Opções da Iluminação Adaptativa",
+        "description": "Configure um componente da Iluminação Adaptativa. O nome das opções são as mesmas que as do YML. Se você já definiu essa configuração no YAML, nenhuma opção vai aparecer aqui. Para acessar um gráfico que demonstra o efeito dos parâmetros, acesse [esse app]({webapp_url}). Para mais detalhes, veja a [documentação oficial]({docs_url}).",
+        "data": {
+          "lights": "lights: Lista das entity_ids das luzes para serem controladas (pode ser vazia). 🌟",
+          "min_brightness": "min_brightness: Percentagem minima de brilho. 💡",
+          "max_brightness": "max_brightness: Percentagem máxima de brilho. 💡",
+          "min_color_temp": "min_color_temp: Cor mais quente em Kelvin. 🔥",
+          "max_color_temp": "max_color_temp: Cor mais fria em Kelvin. ❄️"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "prefer_rgb_color: Quando possível escolher ajuste em RGB em vez de temperatura da cor. 🌈",
+              "transition_until_sleep": "transition_until_sleep: Quando ativado, Adaptive Lighting usará as definições do modo noturno como os mínimos, passando para esses valores no por do sol. 🌙",
+              "take_over_control": "take_over_control: Desativa Adaptive Lighting se alguma fonte chamar`light.turn_on` enquanto as luzes estiverem ligadas e a serem controladas. Tomar nota que esta opção chama o serviço `homeassistant.update_entity` a cada `interval`! 🔒"
+            },
+            "data_description": {
+              "sleep_transition": "Duração da transição quando o \"modo dormir\" é alternado em segundos. 😴",
+              "sunrise_offset": "Ajustar a hora do nascer do sol com um offset  positivo ou negativo em segundos. ⏰",
+              "sunset_offset": "Ajustar a hora do pôr do sol com um offset  positivo ou negativo em segundos. ⏰",
+              "brightness_mode": "Brilho que irá ser usado. Possíveis valores são `default`, `linear` e `tanh`(usa `brightness_mode_time_dark` e `brightness_mode_time_light`). 📈",
+              "autoreset_control_seconds": "Reiniciar o controlo manual automaticamente após um número de segundos. Definir 0 para desativar. ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "Opção inválida"
+    }
+  }
+}

custom_components/adaptive_lighting/translations/ro.json

@@ -0,0 +1,83 @@
+{
+  "config": {
+    "step": {
+      "user": {
+        "description": "Fiecare instanţă poate conţine mai multe lumini!",
+        "title": "Alege un nume pentru instanța de Iluminare Adaptivă"
+      }
+    },
+    "abort": {
+      "already_configured": "Acest dispozitiv este deja configurat"
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "data_description": {
+          "interval": "Frecvenţa adaptării luminilor, în secunde.",
+          "sleep_brightness": "Procentul luminozităţii luminilor în modul 'somn'."
+        },
+        "title": "Opţiuni Iluminare Adaptivă",
+        "data": {},
+        "sections": {
+          "advanced": {
+            "data": {
+              "adapt_only_on_bare_turn_on": "adaptează_doar_la_comanda_de_arpindere:  La aprinderea iniţială a luminilor. Dacă este activat, IA va adapta luminile doar dacă se invocă  'light.turn_on' fără a specifica culoarea sau luminozitatea. Aceasta, de exemplu, previne adaptarea atunci când se activează o scenă. Dacă este dezactivat,IA va adaptata luminile indiferent de prezența  valorilor culorii sau luminozității în service_data. Necesită activarea opţiunii 'preia_controlul. "
+            },
+            "data_description": {
+              "sunrise_offset": "Ajustați ora răsăritului cu un decalaj pozitiv sau negativ în secunde.⏰",
+              "sunset_offset": "Ajustați ora răsăritului cu un decalaj pozitiv sau negativ în secunde.",
+              "brightness_mode": "Mod de luminozitate de utilizat. Valorile posibile sunt: 'implicit', 'liniar' şi 'hiperbolic' ( ultilizează 'mod_luminozitate_timp_de_noapte' şi 'mod_luminozitate_timp_de_zi').",
+              "brightness_mode_time_light": "(Se ignoră dacă `modul_de_luminozitate='implicit'`) Durată în secunde a modificării luminozităţii în sus/jos cand poziţia sorelui este înainte sau după răsărit/apus.",
+              "autoreset_control_seconds": "Resetare automată al controlului manual după un număr de secunde. Setaţi la 0 pentru a dezactiva."
+            }
+          }
+        }
+      }
+    }
+  },
+  "title": "Iluminare Adaptivă",
+  "services": {
+    "apply": {
+      "description": "Aplicaţi luminilor setările curente ale Iluminiării Adaptive luminilor.",
+      "fields": {
+        "lights": {
+          "description": "O lumină (sau listă de lumini) pentru care să se aplice setările."
+        }
+      }
+    },
+    "change_switch_settings": {
+      "fields": {
+        "entity_id": {
+          "description": "Numele entităţii."
+        },
+        "sleep_brightness": {
+          "description": "Procentul luminozităţii luminilor în modul 'somn'."
+        },
+        "sleep_transition": {
+          "description": "Durata de tranziție (în secunde) atunci când modul de „somn” este activat."
+        },
+        "autoreset_control_seconds": {
+          "description": "Resetare automată al controlului manual după un număr de secunde. Setaţi la 0 pentru a dezactiva."
+        },
+        "only_once": {
+          "description": "Adaptează luminile doar la pornire ('activat') sau adaptează continuu ('dezactivat')."
+        },
+        "sunrise_offset": {
+          "description": "Ajustați ora răsăritului cu un decalaj pozitiv sau negativ în secunde.⏰"
+        },
+        "sunset_offset": {
+          "description": "Ajustați ora apusului cu un decalaj pozitiv sau negativ în secunde."
+        }
+      },
+      "description": "Schimbați orice setări dorită în comutator. Toate opțiunile de aici sunt la fel ca în fluxul de configurare."
+    },
+    "set_manual_control": {
+      "fields": {
+        "lights": {
+          "description": "Numele luminii (luminilor) , dacă nu sunt specificate, sunt selectate toate luminile ce aparţin de comutator."
+        }
+      }
+    }
+  }
+}

custom_components/adaptive_lighting/translations/ru.json

@@ -20,27 +20,74 @@
         "title": "Настройки Adaptive Lighting",
         "description": "Все настройки компонента Adaptive Lighting. Названия опций соответствуют настройкам в YAML. Параметры не отображаются, если в конфигурации YAML определена запись adaptive_lighting.",
         "data": {
-          "lights": "Осветительные приборы",
-          "initial_transition": "initial_transition: Начальный переход, когда свет переключается с 'off' на 'on'. (секунды)",
-          "sleep_transition": "sleep_transition: Когда прибор переходит в Режима Сна (Sleep Mode) и 'sleep_state' изменяется. (секунды)",
+          "lights": "Осветительные приборы: список источников света, которыми нужно управлять (может быть пустым). 🌟",
           "interval": "interval: Интервал между обновлениями переключателя. (секунды)",
-          "max_brightness": "max_brightness: Максимальная яркость света во время цикла. (%)",
-          "max_color_temp": "max_color_temp: Самый холодный оттенок цветовой температуры во время цикла. (Kelvin)",
-          "min_brightness": "min_brightness: Минимальная яркость света во время цикла. (%)",
-          "min_color_temp": "min_color_temp: Самый теплый оттенок цветовой температуры во время цикла. (Kelvin)",
-          "only_once": "only_once: Адаптировать свет только при включении.",
-          "prefer_rgb_color": "prefer_rgb_color: По возможности использовать 'rgb_color' вместо 'color_temp'.",
-          "separate_turn_on_commands": "separate_turn_on_commands: Раздельные команды для каждого атрибута (цвет, яркость и т.д.) в 'light.turn_on' (требуется для некоторых источников света).",
-          "sleep_brightness": "sleep_brightness: Настройка яркости для Режима Сна (Sleep Mode). (%)",
-          "sleep_color_temp": "sleep_color_temp: Настройка цветовой температуры для Режима Сна (Sleep Mode). (Kelvin)",
-          "sunrise_offset": "sunrise_offset: За сколько времени до (-) или после (+) переопределить время восхода во время цикла. (+/- секунды)",
-          "sunrise_time": "sunrise_time: Ручное изменение времени восхода солнца, если указано 'None', используется фактическое время восхода в Вашем местоположении. (ЧЧ:ММ:СС)",
-          "sunset_offset": "sunset_offset: За сколько времени до (-) или после (+) переопределить время заката во время цикла. (+/- секунды)",
-          "sunset_time": "sunset_time: Ручное изменение времени заката солнца,  если указано 'None', используется фактическое время заката в Вашем местоположении. (ЧЧ:ММ:СС)",
-          "take_over_control": "take_over_control: Если что-либо, кроме Adaptive Lighting, вызывает службу 'light.turn_on', когда свет уже включен, прекратить адаптацию этого осветительного прибора, пока он (или переключатель) не переключится off -> on.",
-          "detect_non_ha_changes": "detect_non_ha_changes: Обнаруживает все изменения на >10% примененные к освещению (также и из-за пределов Home Assistant), требует включения 'take_over_control' (вызывает 'homeassistant.update_entity' каждый 'interval'!)",
           "transition": "Время перехода при применении изменения к источникам света. (секунды)",
-          "adapt_delay": "Время ожидания между включением света и применением адаптации. Может помочь избежать мерцания. (секунды)"
+          "min_brightness": "min_brightness: Минимальная яркость света во время цикла. (%)",
+          "max_brightness": "max_brightness: Максимальная яркость света во время цикла. (%)",
+          "min_color_temp": "min_color_temp: Самый теплый оттенок цветовой температуры во время цикла. (Kelvin)",
+          "max_color_temp": "max_color_temp: Самый холодный оттенок цветовой температуры во время цикла. (Kelvin)",
+          "sleep_brightness": "sleep_brightness: Настройка яркости для Режима Сна (Sleep Mode). (%)",
+          "sleep_color_temp": "sleep_color_temp: Настройка цветовой температуры для Режима Сна (Sleep Mode). (Kelvin)"
+        },
+        "data_description": {
+          "interval": "Частота адаптации освещения в секундах. 🔄",
+          "transition": "Продолжительность перехода при смене освещения, в секундах. 🕑",
+          "sleep_brightness": "Процент яркости света в спящем режиме. 😴",
+          "sleep_color_temp": "Цветовая температура в спящем режиме (используется, когда параметр `sleep_rgb_or_color_temp` имеет значение `color_temp`) в Кельвинах. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition: Начальный переход, когда свет переключается с 'off' на 'on'. (секунды)",
+              "prefer_rgb_color": "prefer_rgb_color: По возможности использовать 'rgb_color' вместо 'color_temp'.",
+              "sleep_rgb_or_color_temp": "sleep_rgb_or_color_temp: Использовать либо 'rgb_color', либо 'color_temp' в режиме сна. 🌙",
+              "sleep_rgb_color": "sleep_rgb_color: Цвет RGB в режиме сна (используется при 'sleep_rgb_or_color_temp' как 'rgb_color'). 🌈",
+              "sleep_transition": "sleep_transition: Когда прибор переходит в Режима Сна (Sleep Mode) и 'sleep_state' изменяется. (секунды)",
+              "transition_until_sleep": "transition_until_sleep: когда включено, адаптивное освещение будет рассматривать настройки сна как минимальные, переходя к этим значениям после захода солнца. 🌙",
+              "sunrise_time": "sunrise_time: Ручное изменение времени восхода солнца, если указано 'None', используется фактическое время восхода в Вашем местоположении. (ЧЧ:ММ:СС)",
+              "min_sunrise_time": "min_sunrise_time: Самое раннее время виртуального восхода (ЧЧ:ММ:СС). 🌅",
+              "max_sunrise_time": "max_sunrise_time: Самое позднее время виртуального восхода (ЧЧ:ММ:СС). 🌅",
+              "sunrise_offset": "sunrise_offset: За сколько времени до (-) или после (+) переопределить время восхода во время цикла. (+/- секунды)",
+              "sunset_time": "sunset_time: Ручное изменение времени заката солнца,  если указано 'None', используется фактическое время заката в Вашем местоположении. (ЧЧ:ММ:СС)",
+              "min_sunset_time": "min_sunset_time: Самое раннее время виртуального заката (ЧЧ:ММ:СС). 🌇",
+              "max_sunset_time": "max_sunset_time: Самое позднее время виртуального заката (ЧЧ:ММ:СС). 🌇",
+              "sunset_offset": "sunset_offset: За сколько времени до (-) или после (+) переопределить время заката во время цикла. (+/- секунды)",
+              "brightness_mode": "brightness_mode: Режим яркости для использования (default, linear, tanh). 📈",
+              "take_over_control": "take_over_control: Если что-либо, кроме Adaptive Lighting, вызывает службу 'light.turn_on', когда свет уже включен, прекратить адаптацию этого осветительного прибора, пока он (или переключатель) не переключится off -> on.",
+              "detect_non_ha_changes": "detect_non_ha_changes: Обнаруживает все изменения на >10% примененные к освещению (также и из-за пределов Home Assistant), требует включения 'take_over_control' (вызывает 'homeassistant.update_entity' каждый 'interval'!)",
+              "autoreset_control_seconds": "autoreset_control_seconds: Автосброс ручного управления через X секунд. ⏲️",
+              "only_once": "only_once: Адаптировать свет только при включении.",
+              "adapt_only_on_bare_turn_on": "Adapt_only_on_bare_turn_on: При первоначальном включении света. Если установлено значение «true», AL адаптируется только в том случае, если «light.turn_on» вызывается без указания цвета или яркости. ❌🌈 Это, например, предотвращает адаптацию при активации сцены. Если false, AL адаптируется независимо от наличия цвета или яркости в исходных service_data. Требуется включить take_over_control. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Раздельные команды для каждого атрибута (цвет, яркость и т.д.) в 'light.turn_on' (требуется для некоторых источников света).",
+              "send_split_delay": "send_split_delay: Задержка между отдельными командами включения для источников света. ⏲️",
+              "adapt_delay": "Время ожидания между включением света и применением адаптации. Может помочь избежать мерцания. (секунды)",
+              "skip_redundant_commands": "Skip_redundant_commands: Пропустить отправку команд адаптации, целевое состояние которых уже равно известному состоянию источника света. Минимизирует сетевой трафик и улучшает скорость адаптации в некоторых ситуациях. 📉Отключите, если физические состояния освещения не синхронизируются с записанным состоянием HA.",
+              "intercept": "intercept: перехватывать и адаптировать вызовы `light.turn_on` для обеспечения мгновенной адаптации цвета и яркости. 🏎️ Отключите источники света, которые не поддерживают `light.turn_on` с цветом и яркостью.",
+              "multi_light_intercept": "multi_light_intercept: перехватывает и адаптирует вызовы `light.turn_on`, нацеленные на несколько источников света. ➗⚠️ Это может привести к разделению одного вызова `light.turn_on` на несколько вызовов, например, когда освещение включено в разные выключатели. Требуется, чтобы `перехват` был включен.",
+              "include_config_in_attributes": "include_config_in_attributes: отображать все параметры в качестве атрибутов на переключателе в Home Assistant, если установлено значение `true`. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Продолжительность первого перехода, когда освещение переключается с `выключено` на `включено` в секундах. ⏲️",
+              "sleep_rgb_or_color_temp": "Используйте либо `\"rgb_color\"`, либо `\"color_temp\"` в спящем режиме. 🌙",
+              "sleep_rgb_color": "Цвет RGB в спящем режиме (используется, когда параметр `sleep_rgb_or_color_temp` имеет значение \"rgb_color\"). 🌈",
+              "sleep_transition": "Длительность перехода при переключении \"спящего режима\" в секундах. 😴",
+              "sunrise_time": "Устанавливает фиксированное время (ЧЧ:ММ:СС) восхода солнца. 🌅",
+              "min_sunrise_time": "Устанавливает самое раннее время виртуального восхода солнца (ЧЧ:ММ:СС), чтобы обеспечить возможность более позднего восхода солнца. 🌅",
+              "max_sunrise_time": "Устанавливает последнее время виртуального восхода солнца (ЧЧ:ММ:СС), что позволит восходить раньше. 🌅",
+              "sunrise_offset": "Регулирует время восхода солнца с положительным или отрицательным смещением в секундах. ⏰",
+              "sunset_time": "Устанавливает фиксированное время (ЧЧ:ММ:СС) для заката. 🌇",
+              "min_sunset_time": "Устанавливает самое раннее время виртуального заката (ЧЧ:ММ:СС), чтобы обеспечить более поздние закаты. 🌇",
+              "max_sunset_time": "Устанавливает последнее время виртуального заката (ЧЧ:ММ:СС), чтобы обеспечить более ранние закаты. 🌇",
+              "sunset_offset": "Регулирует время заката с помощью положительного или отрицательного смещения в секундах. ⏰",
+              "brightness_mode": "Режим яркости для использования. Возможные значения: `default`, `linear` и `tanh` (используются `brightness_mode_time_dark` и `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(Игнорируется, если `brightness_mode='default'`) Продолжительность в секундах увеличения/уменьшения яркости до/после восхода/заката. 📈📉",
+              "brightness_mode_time_light": "(Игнорируется, если `brightness_mode='default'`) Продолжительность в секундах увеличения/уменьшения яркости после/до восхода/заката. 📈📉.",
+              "autoreset_control_seconds": "Автоматический сброс ручного управления через несколько секунд. Установите значение 0, чтобы отключить. ⏲️",
+              "send_split_delay": "Задержка (миллисекунды) между отдельными командами поворота для источников света, которые не поддерживают одновременную настройку яркости и цвета. ⏲️",
+              "adapt_delay": "Время ожидания (в секундах) между включением света и применением изменений адаптивного освещения. Возможно поможет избежать мерцания. ⏲️"
+            }
+          }
         }
       }
     },
@@ -48,5 +95,139 @@
       "option_error": "Ошибка в настройках!",
       "entity_missing": "Выбранный индикатор не найден"
     }
+  },
+  "services": {
+    "apply": {
+      "fields": {
+        "entity_id": {
+          "description": "`entity_id` переключателя с применяемыми настройками. 📝"
+        },
+        "lights": {
+          "description": "Источник света (или список источников света), к которому нужно применить настройки. 💡"
+        },
+        "adapt_brightness": {
+          "description": "Нужно ли адаптировать яркость света. 🌞"
+        },
+        "turn_on_lights": {
+          "description": "Включать ли свет, который в данный момент выключен. 🔆"
+        },
+        "adapt_color": {
+          "description": "Нужно ли адаптировать цвет, если поддерживается источником света. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Предпочитать ли настройку цвета RGB цветовой температуре света, когда это возможно. 🌈"
+        },
+        "transition": {
+          "description": "Длительность плавного перехода при смене освещения, в секундах. 🕑"
+        }
+      },
+      "description": "Применяет текущие настройки адаптивного освещения к источникам света."
+    },
+    "change_switch_settings": {
+      "fields": {
+        "max_sunrise_time": {
+          "description": "Устанавливает самое раннее время виртуального заката (ЧЧ:ММ:СС), чтобы обеспечить более поздние закаты. 🌇"
+        },
+        "min_brightness": {
+          "description": "Минимальный процент яркости. 💡"
+        },
+        "sunrise_time": {
+          "description": "Устанавливает фиксированное время (ЧЧ:ММ:СС) восхода солнца. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "Показывать все параметры в качестве атрибутов переключателя в Home Assistant, если установлено значение `true`. 📝"
+        },
+        "max_brightness": {
+          "description": "Максимальный процент яркости. 💡"
+        },
+        "sleep_rgb_color": {
+          "description": "Цвет RGB в спящем режиме (используется, когда параметр `sleep_rgb_or_color_temp` имеет значение \"rgb_color\"). 🌈"
+        },
+        "use_defaults": {
+          "description": "Устанавливает значения по умолчанию, не указанные в этом вызове службы. Варианты: \"current\" (по умолчанию, сохраняются текущие значения), \"factory\" (сброс к документированным настройкам по умолчанию) или \"configuration\" (возврат к настройкам конфигурации по умолчанию). ⚙️"
+        },
+        "sunset_time": {
+          "description": "Устанавливает фиксированное время (ЧЧ:ММ:СС) для заката. 🌇"
+        },
+        "min_sunset_time": {
+          "description": "Устанавливает самое раннее время виртуального заката (ЧЧ:ММ:СС), чтобы обеспечить более поздние закаты. 🌇"
+        },
+        "sleep_brightness": {
+          "description": "Процент яркости света в режиме сна. 😴"
+        },
+        "detect_non_ha_changes": {
+          "description": "Обнаруживает и останавливает адаптацию для изменений состояния, отличных от `light.turn_on`. Требуется включить `take_over_control`. 🕵️ Внимание: ⚠️ Некоторые индикаторы могут ошибочно указывать включенное состояние, что может привести к неожиданному включению света. Отключите эту функцию, если у вас возникнут такие проблемы."
+        },
+        "sunrise_offset": {
+          "description": "Отрегулируйте время восхода солнца с положительным или отрицательным смещением в секундах. ⏰"
+        },
+        "sleep_color_temp": {
+          "description": "Цветовая температура в режиме сна (используется, когда параметр «sleep_rgb_or_color_temp» имеет значение «color_temp») в Кельвинах. 😴"
+        },
+        "min_color_temp": {
+          "description": "Самая теплая цветовая температура в Кельвинах. 🔥"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Используйте либо «rgb_color», либо «color_temp» в режиме сна. 🌙"
+        },
+        "turn_on_lights": {
+          "description": "Включать ли свет, который в данный момент выключен. 🔆"
+        },
+        "initial_transition": {
+          "description": "Длительность первого плавного перехода, когда освещение переключается с «выключено» на «включено» в секундах. ⏲️"
+        },
+        "entity_id": {
+          "description": "Сущность `Entity ID` переключателя `switch`. 📝"
+        },
+        "take_over_control": {
+          "description": "Отключите адаптивное освещение, если другой источник вызывает `light.turn_on`, когда освещение включено и адаптируется. Обратите внимание, что это вызывает `homeassistant.update_entity` каждый `interval` интервал! 🔒"
+        },
+        "sleep_transition": {
+          "description": "Длительность плавного перехода при переключении «спящего режима» в секундах. 😴"
+        },
+        "autoreset_control_seconds": {
+          "description": "Автоматический сброс ручного управления через Х секунд. Установите значение 0, чтобы отключить. ⏲️"
+        },
+        "adapt_delay": {
+          "description": "Время ожидания (в секундах) между включением света и применением адаптивного освещения. Может помочь избежать мерцаний. ⏲️"
+        },
+        "only_once": {
+          "description": "Адаптировать освещение только тогда, когда оно включено («true») или продолжать его адаптировать («false»). 🔄"
+        },
+        "separate_turn_on_commands": {
+          "description": "Используйте отдельные вызовы `light.turn_on` для цвета и яркости, требуется для некоторых типов освещения. 🔀"
+        },
+        "prefer_rgb_color": {
+          "description": "Предпочитать ли настройку цвета RGB цветовой температуре света, когда это возможно. 🌈"
+        },
+        "max_color_temp": {
+          "description": "Самая холодная цветовая температура в Кельвинах. ❄️"
+        },
+        "sunset_offset": {
+          "description": "Отрегулируйте время заката с помощью положительного или отрицательного смещения в секундах. ⏰"
+        },
+        "send_split_delay": {
+          "description": "Задержка (мс) между отдельными командами поворота `separate_turn_on_commands` для источников света, которые не поддерживают одновременную настройку яркости и цвета. ⏲️"
+        },
+        "transition": {
+          "description": "Длительность плавного перехода при смене освещения, в секундах. 🕑"
+        }
+      },
+      "description": "Измените переключателями настройки, которые вам подходят. Все параметры здесь такие же, как и в процессе настройки."
+    },
+    "set_manual_control": {
+      "description": "Отметьте, контролируется ли свет вручную.",
+      "fields": {
+        "manual_control": {
+          "description": "Добавлять («true») или удалять («false») свет из списка «ручного упрваления». 🔒"
+        },
+        "entity_id": {
+          "description": "Сущность `entity_id` переключателя для выбора ручного управления `manually controlled`. 📝"
+        },
+        "lights": {
+          "description": "Сущность(и) `entity_id` источников света, если не указано, выбираются все источники света в переключателе. 💡"
+        }
+      }
+    }
   }
 }

custom_components/adaptive_lighting/translations/sk.json

@@ -0,0 +1,213 @@
+{
+  "options": {
+    "step": {
+      "init": {
+        "data": {
+          "lights": "svetlá: Zoznam svetiel (entity_id), ktoré majú byť ovládané (môže byť prázdny). 🌟",
+          "min_brightness": "min_brightness: Najnižší jas (v %). 💡",
+          "max_brightness": "max_brightness: Najvyšší jas (v %). 💡",
+          "min_color_temp": "min_color_temp: Najnižšia teplota svetla (v ˚K). 🔥",
+          "max_color_temp": "max_color_temp: Najvyššia teplota svetla (v ˚K). ❄️"
+        },
+        "data_description": {
+          "interval": "Frekvencia s akou prispôsobovať svetlá (v sekundách). 🔄",
+          "transition": "Trvanie prechodu, keď sú svetlá zmenené (v sekundách). ⏲️",
+          "sleep_brightness": "Jas svetiel pri režime spánku (v %). 😴",
+          "sleep_color_temp": "Teplota svetla (v ˚K) v režime spánku (pokiaľ `sleep_rgb_or_color_temp` je `color_temp`). 😴"
+        },
+        "title": "Nastavenia Adaptívneho osvetlenia",
+        "description": "Nastavte komponentu Adaptívneho osvetlenia. Názvy nastavení sú zhodné s názvami v súbore YAML. Ak ste túto položku nastavili už v YAML, tak tu sa nezobrazia žiadne možnosti nastavenia. Interaktívne grafy, ktoré zobrazujú vplyv nastavení, nájdete na [tejto webovej aplikácii]({webapp_url}). Ďalšie informácie nájdete v [oficiálnej dokumentácii]({docs_url}).",
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "prefer_rgb_color: Či preferovať nastavenie cez RGB než nastavením teploty svetla, ak je to možné. 🌈",
+              "transition_until_sleep": "transition_until_sleep: Keď je funkcia povolená, Adaptívne osvetlenie bude považovať nastavenia režimu spánku ako minimum, a na tieto hodnoty prejde po západe slnka. 🌙",
+              "take_over_control": "take_over_control: Ak sú svetlá zapnuté a prispôsobované a niečo zavolá službu `light.turn_on`, dôjde k vypnutiu Adaptívneho osvetlenia. Poznámka: Zapnutie tejto voľby spôsobí volanie služby `homeassistant.update_entity` každý `interval`! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: Deteguje a zastaví prispôbovanie pre zmeny mimo `light.turn_on`. Vyžaduje zapnutie `take_over_control`. 🕵️ Upozornenie: ⚠️ Niektoré svetlá môžu falošne indikovať zapnutý stav, čo spôsobí, že sa svetlo neočakávane zapne. Ak narazíte na tento problém, funkciu vypnite.",
+              "only_once": "only_once: Prispôsobiť svetlá iba pri zapnutí (`true`) alebo prispôsobovať ich priebežne (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Len pri čistom zapnutí svetiel. Pri nastavení `true` prispôsobí Adaptívne osvetlenie svetlá len pri zavolaní služby `light.turn_on` bez parametrov jasu alebo teploty svetla. ❌🌈 Napríklad: zamedzí to prispôsobovaniu ak je aktivovaná scéna. Pri nastavení `false` dôjde k prispôsobeniu nezávisle na tom či sú parametre jasu alebo teploty svetla prítomné v`service_data`. Vyžaduje zapnutie `take_over_control`. 🕵️ ",
+              "separate_turn_on_commands": "separate_turn_on_commands: Použiť samostatné volania služby `light.turn_on` pre nastavenie teploty svetla a jasu (môže byť potrebné pre niektoré typy svetiel). 🔀",
+              "skip_redundant_commands": "skip_redundant_commands: Preskočiť odoslanie prispôsobovacích príkazov, ktorých cieľový stav je zhodný s posledným známym stavom. Nastavenie minimalizuje sieťovú prevádzku a v niektorých prípadoch môže zlepšiť odozvu prispôsobovania. 📉 Vypnite, pokiaľ skutočný stav svetiel prestáva odpovedať stavu zaznamenanom v HA.",
+              "intercept": "intercept: Zachytiť a prispôsobiť volania `light.turn_on`, aby došlo k okamžitému prispôsobeniu jasu a teploty svetla. 🏎️ Vypnite pre svetlá, ktoré nepodporujú `light.turn_on` s teplotou svetla a jasom zároveň.",
+              "multi_light_intercept": "multi_light_intercept: Zachytiť a prispôsobiť volanie služby`light.turn_on`, ktoré ovlyvňuje viacero svetiel. ➗⚠️ Toto môže spôsobiť rozdelenie jedného volania `light.turn_on`na viacero volaní, napr. ak sú svetlá pod rôznymi prepínačmi adaptívneho osvetlenia. Vyžaduje zapnutie `intercept`.",
+              "include_config_in_attributes": "include_config_in_attributes: Zobraziť všetky nastavenia ako atribúty prepínača v Home Assistant. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Trvanie prvého prechodu, keď sú svetlá zapnuté z `off` na `on` (v sekundách). ⏲️",
+              "sleep_rgb_or_color_temp": "V režime spánku použiť `\"rgb_color\"` alebo `\"color_temp\"`. 🌙",
+              "sleep_rgb_color": "Farba svetla RGB v režime spánku (pokiaľ `sleep_rgb_or_color_temp` je `rgb_color `). 🌈",
+              "sleep_transition": "Trvanie prechodu do alebo z režimu spánku (v sekundách). 😴",
+              "sunrise_time": "Nastaviť pevný čas (HH:MM:SS) pre východ slnka. 🌅",
+              "min_sunrise_time": "Nastavte najskorší možný virtuálny východ slnka (HH:MM:SS). Umožňuje neskorší východ slnka. 🌅",
+              "max_sunrise_time": "Nastavte najneskorší možný virtuálny východ slnka (HH:MM:SS). Umožňuje skorší východ slnka. 🌅",
+              "sunrise_offset": "Upravte čas východu slnka o sekundy vpred alebo vzad. ⏰",
+              "sunset_time": "Nastaviť pevný čas (HH:MM:SS) pre západ slnka. 🌇",
+              "min_sunset_time": "Nastavte najskorší možný virtuálny západ slnka (HH:MM:SS). Umožňuje neskorší západ slnka. 🌅",
+              "max_sunset_time": "Nastavte najneskorší možný virtuálny západ slnka (HH:MM:SS). Umožňuje skorší západ slnka. 🌅",
+              "sunset_offset": "Upravte čas západu slnka o sekundy vpred alebo vzad. ⏰",
+              "brightness_mode": "Výber režimu jasu. Možné hodnotu sú `default`, `linear` a `tanh` (používa `brightness_mode_time_dark` a `brightness_mode_time_light`). 📈",
+              "brightness_mode_time_dark": "(Ignorované ak `brightness_mode='default'`) Čas na zvýšenie/zníženie jasu po udalosti/pred udalosťou východu/západu slnka. 📈📉",
+              "brightness_mode_time_light": "(Ignorovaný, ak `brightness_mode = 'predvolené') Trvanie v sekundách na rampu / vypnutie jasu po / pred východ slnka/sunset. 📈📉.",
+              "autoreset_control_seconds": "Automaticky ukončiť manuálne ovládanie po zadanom množtve sekúnd. Pre vypnutie nastavte 0. ⏲️",
+              "send_split_delay": "Pauza (v ms) medzi príkazmi pri zapnutom `separate_turn_on_commands` pre svetlá, ktoré nepodporujú súčasné nastavenie jasu a teploty svetla. ⏲️",
+              "adapt_delay": "Pauza (v sekundách) medzi zapnutím svetla a aplikáciou zmien Adaptívneho osvetlenia. Môže pomôcť zabrániť blikaniu. ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "Neplatné nastavenie",
+      "entity_missing": "V Home Assistant chýba jedno alebo viac vybraných svetiel"
+    }
+  },
+  "title": "Adaptívne osvetlenie",
+  "config": {
+    "step": {
+      "user": {
+        "description": "Každá inštancia môže obsahovať viacero svetiel!",
+        "title": "Vyberte názov inštancie Adaptívneho osvetlenia",
+        "data": {
+          "name": "Názov"
+        }
+      }
+    },
+    "abort": {
+      "already_configured": "Toto zariadenie už je nastavené"
+    }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sunrise_time": {
+          "description": "Nastaviť pevný čas (HH:MM:SS) pre východ slnka. 🌅"
+        },
+        "sunset_time": {
+          "description": "Nastaviť pevný čas (HH:MM:SS) pre západ slnka. 🌇"
+        },
+        "sleep_brightness": {
+          "description": "Jas svetiel pri režime spánku (v %). 😴"
+        },
+        "sunrise_offset": {
+          "description": "Upravte čas východu slnka o sekundy vpred alebo vzad. ⏰"
+        },
+        "max_sunrise_time": {
+          "description": "Nastavte najneskorší možný virtuálny východ slnka (HH:MM:SS). Umožňuje skorší východ slnka. 🌅"
+        },
+        "sleep_color_temp": {
+          "description": "Teplota svetla (v ˚K) v režime spánku (pokiaľ `sleep_rgb_or_color_temp` je `color_temp`). 😴"
+        },
+        "min_brightness": {
+          "description": "Najnižší jas (v %). 💡"
+        },
+        "min_color_temp": {
+          "description": "Najnižšia teplota svetla (v ˚K). 🔥"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "V režime spánku použiť `\"rgb_color\"` alebo `\"color_temp\"`. 🌙"
+        },
+        "turn_on_lights": {
+          "description": "Či sa majú zapnúť svetlá, ktoré sú momentálne vypnuté. 🔆"
+        },
+        "initial_transition": {
+          "description": "Trvanie prvého prechodu, keď sú svetlá zapnuté z `off` na `on` (v sekundách). ⏲️"
+        },
+        "entity_id": {
+          "description": "ID prepínača. 📝"
+        },
+        "include_config_in_attributes": {
+          "description": "Zobraziť všetky nastavenia ako atribúty prepínača v Home Assistant. 📝"
+        },
+        "max_brightness": {
+          "description": "Najvyšší jas (v %). 💡"
+        },
+        "sleep_rgb_color": {
+          "description": "Farba svetla RGB v režime spánku (pokiaľ `sleep_rgb_or_color_temp` je `rgb_color `). 🌈"
+        },
+        "take_over_control": {
+          "description": "Ak sú svetlá zapnuté a prispôsobované a niečo zavolá službu `light.turn_on`, dôjde k vypnutiu Adaptívneho osvetlenia. Poznámka: Zapnutie tejto voľby spôsobí volanie služby `homeassistant.update_entity` každý `interval`! 🔒"
+        },
+        "sleep_transition": {
+          "description": "Trvanie prechodu do alebo z režimu spánku (v sekundách). 😴"
+        },
+        "autoreset_control_seconds": {
+          "description": "Automaticky ukončiť manuálne ovládanie po zadanom množtve sekúnd. Pre vypnutie nastavte 0. ⏲️"
+        },
+        "adapt_delay": {
+          "description": "Pauza (v sekundách) medzi zapnutím svetla a aplikáciou zmien Adaptívneho osvetlenia. Môže pomôcť zabrániť blikaniu. ⏲️"
+        },
+        "only_once": {
+          "description": "Prispôsobiť svetlá len pri zapnutí (`true`) alebo prispôsobovať ich priebežne (`false`). 🔄"
+        },
+        "use_defaults": {
+          "description": "Stanovuje predvolené hodnoty nie sú uvedené v tomto servisnom hovore. Možnosti: \"current\" (predvolené, zachováva aktuálne hodnoty), \"chôdzky na zdokumentované predvolené nastavenia), alebo \"konfigurácia\" (odkazy prepínať predvolené nastavenia). ⚙️"
+        },
+        "separate_turn_on_commands": {
+          "description": "Použiť samostatné volania služby `light.turn_on` pre nastavenie teploty svetla a jasu (môže byť potrebné pre niektoré typy svetiel). 🔀"
+        },
+        "prefer_rgb_color": {
+          "description": "Či preferovať nastavenie cez RGB než nastavením teploty svetla, ak je to možné. 🌈"
+        },
+        "max_color_temp": {
+          "description": "Najvyššia teplota svetla (v ˚K). ❄️"
+        },
+        "sunset_offset": {
+          "description": "Upravte čas západu slnka o sekundy vpred alebo vzad. ⏰"
+        },
+        "send_split_delay": {
+          "description": "Pauza (v ms) medzi príkazmi pri zapnutom `separate_turn_on_commands` pre svetlá, ktoré nepodporujú súčasné nastavenie jasu a teploty svetla. ⏲️"
+        },
+        "transition": {
+          "description": "Trvanie prechodu, keď sú svetlá zmenené (v sekundách). ⏲️"
+        },
+        "min_sunset_time": {
+          "description": "Nastavte najskorší možný virtuálny západ slnka (HH:MM:SS). Umožňuje neskorší západ slnka. 🌅"
+        },
+        "detect_non_ha_changes": {
+          "description": "Detekuje a zastaví prispôsobovanie pre iné zmeny stavov než `light.turn_on`. Vyžaduje zapnuté `take_over_control`. 🕵️ Upozornenie: ⚠️ Niektoré svetlá môžu nesprávne indikovať stav 'on', čo môže spôsobiť neočakávané zapnutie svetiel. Vypnite toto nastavenie, ak sa takéto problémy objavia."
+        }
+      },
+      "description": "Zmeňte ľubovoľné nastavenie prepínača. Všetky možnosti sú rovnaké ako v config flow."
+    },
+    "apply": {
+      "fields": {
+        "entity_id": {
+          "description": "`entity_id` prepínača, na ktorý sa majú aplikovať zmeny. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Či prispôsobiť jas svetla. 🌞"
+        },
+        "turn_on_lights": {
+          "description": "Či sa majú zapnúť svetlá, ktoré sú momentálne vypnuté. 🔆"
+        },
+        "adapt_color": {
+          "description": "Či prispôsobiť teplotu svetla na podporovaných svetlách. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Či preferovať nastavenie cez RGB než nastavením teploty svetla, ak je to možné. 🌈"
+        },
+        "lights": {
+          "description": "Svetlo (alebo zoznam svetiel), na ktoré sa má nastavenie aplikovať. 💡"
+        },
+        "transition": {
+          "description": "Trvanie prechodu, keď sú svetlá zmenené (v sekundách). ⏲️"
+        }
+      },
+      "description": "Aplikuje na svetlá súčasné nastavenie Adaptívneho osvetlenia."
+    },
+    "set_manual_control": {
+      "fields": {
+        "manual_control": {
+          "description": "Či pridať (`true`) alebo odobrať (`false`) svetlo zo zoznamu \"manuálne ovládaných\". 🔒"
+        },
+        "entity_id": {
+          "description": "`entity_id` prepínača u ktorého sa majú svetlá o(d)značiť ako \"manuálne ovládané\". 📝"
+        },
+        "lights": {
+          "description": "subjekt_id(s) svietidiel, ak nie je špecifikované, všetky svetlá v prepínači sú vybrané. 💡"
+        }
+      },
+      "description": "Či označiť svetlo ako \"manuálne ovládané\"."
+    }
+  }
+}

custom_components/adaptive_lighting/translations/sl.json

@@ -0,0 +1,83 @@
+{
+  "options": {
+    "step": {
+      "init": {
+        "data": {
+          "lights": "lights: Seznam entity_id-jev luči za nadzor (lahko je prazen). 🌟",
+          "min_brightness": "min_brightness: Odstotek najmanjše svetlosti. 💡",
+          "max_brightness": "max_brightness: Odstotek največeje svetlosti. 💡",
+          "min_color_temp": "min_color_temp: Najtoplejša barvna temperatura v Kelvinih. 🔥",
+          "max_color_temp": "max_color_temp: Najhladnejša barvna temperatura v kelvinih. ❄️"
+        },
+        "data_description": {
+          "interval": "Pogostost prilagajanja luči, v sekundah. 🔄",
+          "transition": "Trajanje prehoda pri spreminjanju luči, v sekundah. 🕑",
+          "sleep_brightness": "Odstotek svetlosti luči v načinu spanja. 😴",
+          "sleep_color_temp": "Barvna temperatura v načinu spanja (uporabljena, ko je \"sleep_rgb_or_color_temp\" nastavljena na \"color_temp\") v Kelvinih. 😴"
+        },
+        "title": "Nastavitve prilagodljive osvetlitve",
+        "description": "Konfigurirajte komponento Adaptive Lighting. Imena možnosti so usklajena z nastavitvami v YAML. Če ste ta vnos definirali v YAML, tukaj ne bodo prikazane nobene možnosti. Za interaktivne grafe, ki ponazarjajo učinke parametrov, obiščite to [spletno aplikacijo]({webapp_url}). Za dodatne podrobnosti glejte [uradno dokumentacijo]({docs_url}).",
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "prefer_rgb_color: Ali v primeru možnosti raje uporabiti prilagoditev RGB barve kot barvno temperaturo luči. 🌈",
+              "transition_until_sleep": "transition_until_sleep: Če je omogočeno, bo Adaptive Lighting obravnaval nastavitve spanja kot minimalne vrednosti in bo po zahodu sonca prehajal na te vrednosti. 🌙",
+              "take_over_control": "take_over_control: Onemogoči Adaptive Lighting, če drug vir pokliče \"light.turn_on\", ko so luči prižgane in se prilagajajo. Opozorilo: to ob vsakem intervalu kliče \"homeassistant.update_entity\"! 🔒",
+              "detect_non_ha_changes": "„detect_non_ha_changes: Zazna in ustavi prilagoditve za spremembe stanja, ki niso posledica \"light.turn_on\". Zahteva omogočeno \"take_over_control\". 🕵️ Pozor: ⚠️ Nekatere luči lahko nepravilno poročajo, da so prižgane, kar lahko povzroči nepričakovano vklapljanje. Onemogočite to funkcijo, če naletite na takšne težave.",
+              "only_once": "only_once: Prilagodi luči samo ob vklopu (true) ali pa jih še naprej prilagajaj (false). 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: Ob začetnem vklopu luči. Če je nastavljeno na \"true\",  AL prilagodi samo, če je \"light.turn_on\" klic brez podanih parametrov barve ali jakosti. ❌🌈 S tem se npr. prepreči prilagajanje pri aktivaciji scene. Če je \"false\", AL prilagodi ne glede na prisotnost barve ali jakosti v začetnih \"service_data\". Zahteva omogočeno \"take_over_control\". 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Uporabi ločene klice \"light.turn_on\" za barvo in jakost, kar je potrebno za nekatere tipe luči. 🔀",
+              "skip_redundant_commands": "skip_redundant_commands: Preskoči pošiljanje prilagoditvenih ukazov, če je ciljano stanje že enako poznanemu stanju luči. Zmanjšuje omrežni promet in izboljšuje odzivnost prilagajanja v določenih situacijah. 📉 Onemogočite, če se fizična stanja luči ne ujemajo z zabeleženim stanjem v HA.",
+              "intercept": "intercept: Prestreza in prilagaja klice \"light.turn_on\" za takojšnjo prilagoditev barve in jakosti. 🏎️ Onemogočite za luči, ki ne podpirajo \"light.turn_on\" z barvo in svetlostjo.",
+              "multi_light_intercept": "multi_light_intercept: Prestreza in prilagaja klice \"light.turn_on\", ki ciljajo več luči. ➗⚠️ To lahko privede do razdelitve enega klica \"light.turn_on\" v več klicev, npr. ko so luči na različnih stikalih. Zahteva omogočeno \"intercept\".",
+              "include_config_in_attributes": "include_config_in_attributes: Ko je nastavljeno na \"true\", prikaže vse možnosti kot atribute stikala v Home Assistantu. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Trajanje prvega prehoda, ko se luči prižgejo (iz \"off\" v \"on\"), v sekundah. ⏲️",
+              "sleep_rgb_or_color_temp": "V načinu spanja uporabi  \"rgb_color\" ali \"color_temp\". 🌙",
+              "sleep_rgb_color": "RGB barva v načinu spanja (uporabljena, ko je \"sleep_rgb_or_color_temp\" nastavljeno na \"rgb_color\"). 🌈",
+              "sleep_transition": "Trajanje prehoda, ko se preklopi način spanja, v sekundah. 😴",
+              "sunrise_time": "Nastavi fiksni čas (HH:MM:SS) sončnega vzhoda. 🌅",
+              "min_sunrise_time": "Nastavi najzgodnejši navidezni sončni vzhod (HH:MM:SS), dovoljuje kasnejše vzhode. 🌅",
+              "max_sunrise_time": "Nastavi najkasnejši virtualni sončni vzhod (HH:MM:SS), dovoljuje zgodnejše vzhode. 🌅",
+              "sunrise_offset": "Prilagodite čas sončnega vzhoda z pozitivnim ali negativnim zamikom v sekundah. ⏰",
+              "sunset_time": "Nastavite fiksni čas (HH:MM:SS) za sončni zahod. 🌇",
+              "min_sunset_time": "Nastavite najzgodnejši navidezni čas sončnega zahoda (HH:MM:SS), dovoljuje kasnejše sončne zahode. 🌇",
+              "max_sunset_time": "Nastavite najpoznejši navidezni čas sončnega zahoda (HH:MM:SS), dovoljuje zgodnejše sončne zahode. 🌇",
+              "sunset_offset": "Prilagodite čas sončnega zahoda s pozitivnim ali negativnim zamikom v sekundah. ⏰",
+              "brightness_mode": "Način upravljanja svetlosti. Možne vrednosti so \"default\", \"linear\" in \"tanh\" (uporablja \"brightness_mode_time_dark\" in \"brightness_mode_time_light\"). 📈",
+              "brightness_mode_time_dark": "(Prezrto, če je \"brightness_mode='default'\") Trajanje v sekundah za postopno povečanje ali zmanjšanje svetlosti pred/po sončnem vzhodu/zahodu. 📈📉",
+              "brightness_mode_time_light": "(Prezrto, če je \"brightness_mode='default'\") Trajanje v sekundah za postopno povečanje ali zmanjšanje svetlosti po/pred sončnem vzhodu/zahodu. 📈📉",
+              "autoreset_control_seconds": "Samodejno ponastavi ročni nadzor po določenem številu sekund. Nastavite na 0, da onemogočite. ⏲️",
+              "send_split_delay": "Zamik (ms) med \"separate_turn_on_commands\" za luči, ki ne podpirajo hkratne nastavitve jakosti in barve. ⏲️"
+            }
+          }
+        }
+      }
+    }
+  },
+  "config": {
+    "step": {
+      "user": {
+        "title": "Izberite ime za instanco Adaptive Lighting",
+        "description": "Vsaka instanca lahko vsebuje več luči!"
+      }
+    },
+    "abort": {
+      "already_configured": "Naprava je že konfigurirana"
+    }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "only_once": {
+          "description": "Prilagajaj luči samo kadar so prižgane (\"true\") ali konstantno jih prilagajaj  (\"false\")"
+        },
+        "max_sunrise_time": {
+          "description": "Nastavite najpoznejši navidezni čas sončnega vzhoda (HH:MM:SS), dovoljuje zgodnejše sončne vzhode. 🌅"
+        }
+      }
+    }
+  },
+  "title": "Prilagodljiva osvetlitev"
+}

custom_components/adaptive_lighting/translations/sv.json

@@ -8,10 +8,17 @@
         "data": {
           "name": "Namn"
         }
+      },
+      "menu": {
+        "data": {
+          "action": "Åtgärd"
+        },
+        "title": "Skapa eller duplicera",
+        "description": "Vill du skapa en ny instans eller duplicera en befintlig?"
       }
     },
     "abort": {
-      "already_configured": "Enheten är redan konfiguerad"
+      "already_configured": "Den här enheten är redan konfiguerad"
     }
   },
   "options": {
@@ -21,27 +28,63 @@
         "description": "Alla inställningar för en Adaptiv Ljussättning komponent. Titeln på inställningarna är desamma som i YAML konfigurationen. Inga inställningar visas om enheten redan är konfigurerad i YAML.",
         "data": {
           "lights": "lights, ljuskällor",
-          "adapt_brightness": "adapt_brightness, Adaptiv ljusstyrka",
-          "adapt_color_temp": "adapt_color_temp, Justera färgtemperatur genom att använda 'color_temp' om möjligt",
-          "adapt_rgb_color": "adapt_rgb_color, Justera färgtemperatur genom att använda RGB/XY om möjligt",
-          "initial_transition": "initial_transition, när ljuskällorna går från 'av' till 'på' eller när 'sleep_state' ändras",
           "interval": "interval, Tid mellan uppdateringar i sekunder",
-          "max_brightness": "max_brightness, i procent %",
-          "max_color_temp": "max_color_temp, i Kelvin",
+          "transition": "transition, i sekunder",
           "min_brightness": "min_brightness, i %",
+          "max_brightness": "max_brightness, i procent %",
           "min_color_temp": "min_color_temp, i Kelvin",
-          "only_once": "only_once, Adaptivt justera endast ljuskällorna när de sätts från 'av' till 'på'",
-          "prefer_rgb_color": "prefer_rgb_color, Använd 'rgb_color' över 'color_temp' om möjligt",
-          "separate_turn_on_commands": "separate_turn_on_commands, for each attribute (color, brightness, etc.) in 'light.turn_on', required for some lights.",
+          "max_color_temp": "max_color_temp, i Kelvin",
           "sleep_brightness": "sleep_brightness, i %",
-          "sleep_color_temp": "sleep_color_temp, i Kelvin",
-          "sunrise_offset": "sunrise_offset, i +/- sekunder",
-          "sunrise_time": "sunrise_time, i 'HH:MM:SS' format (om 'None', används den faktiskta soluppgången för din position)",
-          "sunset_offset": "sunset_offset, i +/- sekunder",
-          "sunset_time": "sunset_time, i 'HH:MM:SS' format (om 'None', används den faktiskta solnedgången för din position)",
-          "take_over_control": "take_over_control, om något utöver 'Adaptiv Ljussättning' komponenten kallar på 'light.turn_on' när en ljuskälla redan är på, stängs den adaptiva justeringen av tills ljuskällan stängs av -> på igen, alternativt switchen för konfigurationen",
-          "detect_non_ha_changes": "detect_non_ha_changes, Upptäcker alla ändringar större än 5% gjorda på ljuskällorna som inte kommer från HA. Kräver att 'take_over_control' är påslaget.(Kallar på 'homeassistant.update_entity' vid varje 'interval'!)",
-          "transition": "transition, i sekunder"
+          "sleep_color_temp": "sleep_color_temp, i Kelvin"
+        },
+        "data_description": {
+          "interval": "Frekvens för att anpassa lamporna, i sekunder. 🔄",
+          "transition": "Dröjsmål för övergång när lampor ändras, i sekunder. 🕑",
+          "sleep_brightness": "Procent ljusstyrka för lampor i sovläge. 😴",
+          "sleep_color_temp": "Färgtemperatur i sovläge (används när `sleep_rgb_or_color_temp` är `color_temp`) i Kelvin. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition, när ljuskällorna går från 'av' till 'på' eller när 'sleep_state' ändras",
+              "prefer_rgb_color": "prefer_rgb_color, Använd 'rgb_color' över 'color_temp' om möjligt",
+              "transition_until_sleep": "transition_until_sleep: När aktiverat kommer Adaptive Lighting att behandla sömninställningarna som ett minimum och övergå till dessa värden efter solnedgången. 🌙",
+              "sunrise_time": "sunrise_time, i 'HH:MM:SS' format (om 'None', används den faktiskta soluppgången för din position)",
+              "sunrise_offset": "sunrise_offset, i +/- sekunder",
+              "sunset_time": "sunset_time, i 'HH:MM:SS' format (om 'None', används den faktiskta solnedgången för din position)",
+              "sunset_offset": "sunset_offset, i +/- sekunder",
+              "take_over_control": "take_over_control, om något utöver 'Adaptiv Ljussättning' komponenten kallar på 'light.turn_on' när en ljuskälla redan är på, stängs den adaptiva justeringen av tills ljuskällan stängs av -> på igen, alternativt switchen för konfigurationen",
+              "detect_non_ha_changes": "detect_non_ha_changes, Upptäcker alla ändringar större än 5% gjorda på ljuskällorna som inte kommer från HA. Kräver att 'take_over_control' är påslaget.(Kallar på 'homeassistant.update_entity' vid varje 'interval'!)",
+              "only_once": "only_once, Adaptivt justera endast ljuskällorna när de sätts från 'av' till 'på'",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: När lampor först tänds. Om satt till \"true\", anpassar AL endast om \"light.turn_on\" anropas utan att ange färg eller ljusstyrka. ❌🌈 Detta förhindrar t.ex. anpassning när en scen aktiveras. Om \"false\" anpassas AL oavsett förekomsten av färg eller ljusstyrka i den initiala \"service_data\". \"takeover_control\" måste vara aktiverat. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands, for each attribute (color, brightness, etc.) in 'light.turn_on', required for some lights.",
+              "skip_redundant_commands": "skip_redundant_commands: Hoppa över att skicka anpassningskommandon vars måltillstånd redan är lika med lampans kända tillstånd. Minimerar nätverkstrafik och förbättrar anpassningsförmågan i vissa situationer. 📉 Inaktivera om lampans tillstånd blir osynkroniserade med HA:s registrerade tillstånd.",
+              "intercept": "intercept: Fånga upp och anpassa `light.turn_on`-anrop för att möjliggöra omedelbar anpassning av färg och ljusstyrka. 🏎️ Inaktivera för lampor som inte stöder `light.turn_on` med färg och ljusstyrka.",
+              "multi_light_intercept": "multi_light_intercept: Fånga upp och anpassa \"light.turn_on\"-anrop som riktar sig mot flera lampor. ➗⚠️ Detta kan resultera i att ett enda `light.turn_on`-anrop delas upp i flera anrop, t.ex. när lamporna är kopplade till olika strömbrytare. Kräver att \"intercept\" är aktiverat.",
+              "include_config_in_attributes": "include_config_in_attributes: Visa alla alternativ som attribut på strömbrytaren i Home Assistant när den är inställd på \"true\". 📝"
+            },
+            "data_description": {
+              "initial_transition": "Den första övergångens varaktighet när lampan slås från ”av” till ”på” i sekunder. ⏲️",
+              "sleep_rgb_or_color_temp": "Använd antingen`\"rgb_color\"` eller `\"color_temp\"` i sovläge. 🌙",
+              "sleep_rgb_color": "RGB-färg i sovläge (används när \"sleep_rgb_or_color_temp\" är \"rgb_color\"). 🌈",
+              "sleep_transition": "Dröjsmål för övergång när \"sov läge\" slås på/av, i sekunder. 🕑",
+              "sunrise_time": "Ställ in en fast tid (TT:MM:SS) för soluppgången. 🌅",
+              "min_sunrise_time": "Ställ in den tidigaste virtuella soluppgångstiden (TT: MM: SS), vilket möjliggör senare soluppgångar. 🌅",
+              "max_sunrise_time": "Ställ in den senaste virtuella soluppgångstiden (TT: MM: SS), vilket möjliggör tidigare soluppgångar. 🌅",
+              "sunrise_offset": "Justera soluppgångstiden med positiv  och negativ förskutning is sekunder. ⏰",
+              "sunset_time": "Ställ in en fast tid (TT:MM:SS) för solnedgången. 🌇",
+              "min_sunset_time": "Ställ in den tidigaste virtuella solnedgångstiden (TT: MM: SS), vilket möjliggör senare solnedgångar. 🌇",
+              "max_sunset_time": "Ställ in den senaste virtuella solnedgångstiden (TT: MM: SS), vilket möjliggör tidigare solnedgångar. 🌇",
+              "sunset_offset": "Justera solnedgångstiden med positiv och negativ förskutning is sekunder. ⏰",
+              "brightness_mode": "Ljusstyrkeinställing att använda. Möjliga värden är \"default\", \"linear\" och \"tanh\" (använder \"brightness_mode_time_dark\" och \"brightness_mode_time_light\"). 📈",
+              "brightness_mode_time_dark": "(Ignoreras om `brightness_mode='default'`) Varaktigheten i sekunder för att öka/minska ljusstyrkan efter/före soluppgång/solnedgång. 📈📉.",
+              "brightness_mode_time_light": "(Ignoreras om `brightness_mode='default'`) Varaktigheten i sekunder för att öka/minska ljusstyrkan efter/före soluppgång/solnedgång. 📈📉.",
+              "take_over_control_mode": "Anpassningspausläget när andra källor ändrar ljusstyrka och/eller färg på belysningen. `pause_all` pausar alltid både ljusstyrka och färganpassning. `pause_changed` pausar endast anpassningen av de ändrade attributen och fortsätter att anpassa oförändrade attribut, t.ex. fortsätter färganpassningen när endast ljusstyrkan har ändrats.",
+              "autoreset_control_seconds": "Nollställ automatiskt manuell kontroll efter ett antal sekunder. Sätt till 0 för at avaktivera. ⏲️",
+              "send_split_delay": "Dröjsmål (ms) mellan `separate_turn_on_commands` för lampor som inte stödjer samtidiga ljussyrke och färg inställningar. ⏲️",
+              "adapt_delay": "Väntetid (sekunder) mellan lamptändning och Adaptiv Ljussättning tillämpar ändringar. Kan hjälpa till att undvika flimmer. ⏲️"
+            }
+          }
         }
       }
     },
@@ -49,5 +92,142 @@
       "option_error": "Ogiltlig inställning",
       "entity_missing": "Ett valt ljus hittades inte"
     }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sleep_brightness": {
+          "description": "Procent ljusstyrka för lampor i sovläge. 😴"
+        },
+        "sunrise_offset": {
+          "description": "Justera soluppgångstiden med positiv och negativ förskutning is sekunder. ⏰Justera soluppgångstiden med positiv  och negativ förskutning is sekunder. ⏰"
+        },
+        "sleep_color_temp": {
+          "description": "Färgtemperatur i sovläge (används när `sleep_rgb_or_color_temp` är `color_temp`) i Kelvin. 😴"
+        },
+        "entity_id": {
+          "description": "Enhets-ID för strömbrytaren. 📝"
+        },
+        "sleep_transition": {
+          "description": "Dröjsmål för övergång när \"sov läge\" slås på/av, i sekunder. 🕑"
+        },
+        "autoreset_control_seconds": {
+          "description": "Nollställ automatiskt manuell kontroll efter ett antal sekunder. Sätt till 0 för at avaktivera. ⏲️"
+        },
+        "only_once": {
+          "description": "Anpassa lampor endast när de slås på ('true') eller fortsätt anpassa dem ('false'). 🔄"
+        },
+        "max_color_temp": {
+          "description": "Kallaste färgtemperatur i Kelvin. ❄️"
+        },
+        "sunset_offset": {
+          "description": "Justera solnedgångstiden med positiv och negativ förskutning is sekunder. ⏰"
+        },
+        "send_split_delay": {
+          "description": "Dröjsmål (ms) mellan `separate_turn_on_commands` för lampor som inte stödjer samtidiga ljussyrke och färg inställningar. ⏲️"
+        },
+        "transition": {
+          "description": "Dröjsmål för övergång när lampor ändras, i sekunder. 🕑"
+        },
+        "max_sunrise_time": {
+          "description": "Ställ in den senaste virtuella soluppgångstiden (TT: MM: SS), vilket möjliggör tidigare soluppgångar. 🌅"
+        },
+        "min_brightness": {
+          "description": "Minimal ljusstyrka i procent. 💡"
+        },
+        "min_color_temp": {
+          "description": "Varmaste färgtemperaturen i Kelvin. 🔥"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Använd antingen`\"rgb_color\"` eller `\"color_temp\"` i sovläge. 🌙"
+        },
+        "turn_on_lights": {
+          "description": "Om att tända lampor som är för närvarande släckta. 🔆"
+        },
+        "initial_transition": {
+          "description": "Den första övergångens varaktighet när lampan slås från ”av” till ”på” i sekunder. ⏲️"
+        },
+        "sunrise_time": {
+          "description": "Ställ in en fast tid (TT:MM:SS) för soluppgången. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "Visa alla alternativ som attribut på strömbrytaren i Home Assistant när ”true”. 📝"
+        },
+        "max_brightness": {
+          "description": "Maximal ljusstyrka i procent. 💡"
+        },
+        "sleep_rgb_color": {
+          "description": "RGB-färg i sovläge (används när \"sleep_rgb_or_color_temp\" är \"rgb_color\"). 🌈"
+        },
+        "adapt_delay": {
+          "description": "Väntetid (sekunder) mellan lamptändning och Adaptiv Ljussättning tillämpar ändringar. Kan hjälpa till att undvika flimmer. ⏲️"
+        },
+        "separate_turn_on_commands": {
+          "description": "Använd separata `light.turn_on`anrop för färg och ljusstyrka, behövs för vissa lamptyper. 🔀"
+        },
+        "prefer_rgb_color": {
+          "description": "Om att föredra RGB-färgjustering framför ljusfärgtemperatur när det är möjligt. 🌈"
+        },
+        "sunset_time": {
+          "description": "Ställ in en fast tid (TT:MM:SS) för solnedgången. 🌇"
+        },
+        "min_sunset_time": {
+          "description": "Ställ in den tidigaste virtuella solnedgångstiden (TT: MM: SS), vilket möjliggör senare solnedgångar. 🌇"
+        },
+        "detect_non_ha_changes": {
+          "description": "Upptäcker och stoppar anpassningar för tillståndsändringar som inte är \"light.turn_on\". Behöver \"takeover_control\" aktiverat. 🕵️ Varning: ⚠️ Vissa lampor kan felaktigt indikera ett \"på\"-läge, vilket kan resultera i att lamporna tänds oväntat. Inaktivera den här funktionen om du stöter på sådana problem."
+        },
+        "take_over_control": {
+          "description": "Inaktivera Adaptive Ligting om en annan källa anropar 'light.turn_on' medan lamporna är tända och anpassas. Observera att detta anropar `homeassistant.update_entity` varje `intervall`! 🔒"
+        },
+        "use_defaults": {
+          "description": "Ställer in standardvärden som inte anges i detta serviceanrop. Alternativ: \"current\" (standard, behåller nuvarande värden), \"factory\" (återställer till dokumenterade standardinställningar) eller \"configuration\" (återgår till strömbrytarens standardinställningar). ⚙️"
+        },
+        "take_over_control_mode": {
+          "description": "Anpassningspausläget när andra källor ändrar ljusstyrka och/eller färg på belysningen. `pause_all` pausar alltid både ljusstyrka och färganpassning. `pause_changed` pausar endast anpassningen av de ändrade attributen och fortsätter att anpassa oförändrade attribut, t.ex. fortsätter färganpassningen när endast ljusstyrkan har ändrats."
+        }
+      },
+      "description": "Ändra vilka inställningar du vill ha i strömbrytaren. All dessa inställningar är likadana som i config flow."
+    },
+    "set_manual_control": {
+      "fields": {
+        "lights": {
+          "description": "Enhets-ID för lampor. Om inget anges väljs alla lampor i strömbrytaren. 💡"
+        },
+        "manual_control": {
+          "description": "Lägg till (\"true\") eller ta bort (\"false\") ljuset från listan \"manual_control\". 🔒"
+        },
+        "entity_id": {
+          "description": "Strömbrytarens ”entity_id\" i vilken lampan ska (av)markeras som \"manuellt styrd\". 📝"
+        }
+      },
+      "description": "Markera om en lampa är \"styrd manuellt\"."
+    },
+    "apply": {
+      "description": "Tillämpar nuvarande Adaptiv Ljussätting inställningar till lampor.",
+      "fields": {
+        "lights": {
+          "description": "En lampa (eller en lamplista) till vilka inställningarna tillämpas."
+        },
+        "transition": {
+          "description": "Dröjsmål för övergång när lampor ändras, i sekunder. 🕑"
+        },
+        "entity_id": {
+          "description": "\"entity_id\" för strömbrytaren med inställningarna som ska tillämpas. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Om lampans ljusstyrka ska anpassas. 🌞"
+        },
+        "turn_on_lights": {
+          "description": "Om att tända lampor som är för närvarande släckta. 🔆"
+        },
+        "adapt_color": {
+          "description": "Om färgen på lampor som stödjer ska anpassas. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Om att föredra RGB-färgjustering framför ljusfärgtemperatur när det är möjligt. 🌈"
+        }
+      }
+    }
   }
 }

custom_components/adaptive_lighting/translations/ta.json

@@ -0,0 +1,210 @@
+{
+  "services": {
+    "set_manual_control": {
+      "description": "ஒரு ஒளி 'கைமுறையாக கட்டுப்படுத்தப்பட்டதா' என்பதைக் குறிக்கவும்.",
+      "fields": {
+        "entity_id": {
+          "description": "சுவிட்சின் `நிறுவனம்_ஐடி`, இதில் (அன்) ஒளியை` கைமுறையாக கட்டுப்படுத்தப்படுகிறது 'என்று குறிக்கவும். ."
+        },
+        "lights": {
+          "description": "விளக்குகளின் entity_id (கள்), குறிப்பிடப்படாவிட்டால், சுவிட்சில் உள்ள அனைத்து விளக்குகளும் தேர்ந்தெடுக்கப்படுகின்றன. ."
+        },
+        "manual_control": {
+          "description": "\"கையேடு_ கன்ட்ரோல்\" பட்டியலிலிருந்து ஒளியை சேர்க்க வேண்டுமா அல்லது அகற்ற வேண்டுமா அல்லது அகற்ற வேண்டுமா அல்லது அகற்ற வேண்டுமா? ."
+        }
+      }
+    },
+    "change_switch_settings": {
+      "fields": {
+        "sunrise_offset": {
+          "description": "விநாடிகளில் நேர்மறை அல்லது எதிர்மறை ஆஃப்செட் மூலம் சூரிய தோன்றுகை நேரத்தை சரிசெய்யவும். ."
+        },
+        "sunrise_time": {
+          "description": "சூரிய உதயத்திற்கு ஒரு நிலையான நேரத்தை (HH: MM: SS) அமைக்கவும். ."
+        },
+        "entity_id": {
+          "description": "சுவிட்சின் நிறுவன ஐடி. ."
+        },
+        "use_defaults": {
+          "description": "இந்த பணி அழைப்பில் குறிப்பிடப்படாத இயல்புநிலை மதிப்புகளை அமைக்கிறது. விருப்பங்கள்: \"நடப்பு\" (இயல்புநிலை, தற்போதைய மதிப்புகளைத் தக்க வைத்துக் கொள்கிறது), \"தொழிற்சாலை\" (ஆவணப்படுத்தப்பட்ட இயல்புநிலைகளுக்கு மீட்டமைக்கிறது) அல்லது \"உள்ளமைவு\" (கட்டமைப்பு இயல்புநிலைகளை மாற்றுவதற்கு மாற்றுகிறது). ."
+        },
+        "include_config_in_attributes": {
+          "description": "`உண்மை` என அமைக்கப்பட்டிருக்கும் போது வீட்டு உதவியாளரின் சுவிட்சில் உள்ள அனைத்து விருப்பங்களையும் பண்புகளாகக் காட்டுங்கள். ."
+        },
+        "turn_on_lights": {
+          "description": "தற்போது முடக்கப்பட்ட விளக்குகளை இயக்க வேண்டுமா. ."
+        },
+        "initial_transition": {
+          "description": "விளக்குகள் `ஆஃப்` முதல்` ஆன் `வரை நொடிகளில் மாறும் போது முதல் மாற்றத்தின் காலம். ."
+        },
+        "sleep_transition": {
+          "description": "\"தூக்க பயன்முறை\" நொடிகளில் மாற்றப்படும்போது மாற்றத்தின் காலம். ."
+        },
+        "max_brightness": {
+          "description": "அதிகபட்ச ஒளி விழுக்காடு. ."
+        },
+        "max_color_temp": {
+          "description": "கெல்வினில் குளிரான வண்ண வெப்பநிலை. ."
+        },
+        "min_brightness": {
+          "description": "குறைந்தபட்ச ஒளி விழுக்காடு. ."
+        },
+        "min_color_temp": {
+          "description": "கெல்வினில் வெப்பமான வண்ண வெப்பநிலை. ."
+        },
+        "only_once": {
+          "description": "விளக்குகள் இயக்கப்படும்போது மட்டுமே (`உண்மை`) மாற்றியமைக்கும்போது அல்லது அவற்றைத் தழுவிக்கொள்ளுங்கள் (` பொய்`). ."
+        },
+        "prefer_rgb_color": {
+          "description": "முடிந்தவரை ஒளி வண்ண வெப்பநிலையை விட RGB வண்ண சரிசெய்தலை விரும்பலாமா. ."
+        },
+        "separate_turn_on_commands": {
+          "description": "சில ஒளி வகைகளுக்கு தேவைப்படும் வண்ணம் மற்றும் பிரகாசத்திற்கான தனித்தனி `லைட்.டர்ன்_ஓஎன்` அழைப்புகளைப் பயன்படுத்தவும். ."
+        },
+        "send_split_delay": {
+          "description": "ஒரே நேரத்தில் ஒளி மற்றும் வண்ண அமைப்பை ஆதரிக்காத விளக்குகளுக்கு `தனி_டர்ன்_ஆன்_காமண்ட்ச்` இடையே நேரந்தவறுகை (எம்.எச்). ."
+        },
+        "sleep_brightness": {
+          "description": "தூக்க பயன்முறையில் விளக்குகளின் ஒளி விழுக்காடு. ."
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "தூக்க பயன்முறையில் `\" rgb_color \"` அல்லது `\" Color_Temp \"key ஐப் பயன்படுத்தவும். ."
+        },
+        "sleep_rgb_color": {
+          "description": "தூக்க பயன்முறையில் RGB வண்ணம் (`SLEEP_RGB_OR_COLOR_TEMP`\" RGB_COLOR \"ஆக இருக்கும்போது பயன்படுத்தப்படுகிறது). ."
+        },
+        "sleep_color_temp": {
+          "description": "ச்லீப் பயன்முறையில் வண்ண வெப்பநிலை (கெல்வினில் `SLEEP_RGB_OR_COLOR_TEMP` என்பது` color_temp` ஆக இருக்கும்போது பயன்படுத்தப்படுகிறது). ."
+        },
+        "sunset_offset": {
+          "description": "வினாடிகளில் நேர்மறை அல்லது எதிர்மறை ஆஃப்செட் மூலம் சூரிய மறைவு நேரத்தை சரிசெய்யவும். ."
+        },
+        "sunset_time": {
+          "description": "சூரிய அச்தமனத்திற்கு ஒரு நிலையான நேரத்தை (HH: MM: SS) அமைக்கவும். ."
+        },
+        "max_sunrise_time": {
+          "description": "ஆரம்பகால சூரிய உதயத்தை அனுமதிக்கும் அண்மைக் கால மெய்நிகர் சூரிய தோன்றுகை நேரத்தை (HH: MM: SS) அமைக்கவும். ."
+        },
+        "min_sunset_time": {
+          "description": "ஆரம்பகால மெய்நிகர் சூரிய மறைவு நேரத்தை (HH: MM: SS) அமைக்கவும், பின்னர் சூரிய அச்தமனங்களை அனுமதிக்கிறது. ."
+        },
+        "take_over_control": {
+          "description": "விளக்குகள் இயக்கத்தில் இருக்கும்போது மற்றொரு சான்று `லைட்.டர்ன்_ஒன்` என்று அழைத்தால் தகவமைப்பு விளக்குகளை முடக்கு. இது `ஓமாசிச்டன்ட்.பிடேட்_என்டிட்டி` ஒவ்வொரு` இடைவெளியையும் 'என்று அழைக்கிறது என்பதை நினைவில் கொள்க! ."
+        },
+        "detect_non_ha_changes": {
+          "description": "`விளக்கு அல்லாத. டர்ன்_ஓஎன்` மாநில மாற்றங்களுக்கான தழுவல்களைக் கண்டறிந்து நிறுத்துகிறது. `Take_over_control` இயக்கப்பட்டது. 🕵œ எச்சரிக்கை: ⚠œ சில விளக்குகள் ஒரு 'ஆன்' நிலையை பொய்யாகக் குறிக்கக்கூடும், இதனால் விளக்குகள் எதிர்பாராத விதமாக இயக்கப்படலாம். இதுபோன்ற சிக்கல்களை நீங்கள் சந்தித்தால் இந்த அம்சத்தை முடக்கு."
+        },
+        "transition": {
+          "description": "விளக்குகள் மாறும்போது, நொடிகளில் மாற்றத்தின் காலம். ."
+        },
+        "adapt_delay": {
+          "description": "லைட் டர்ன் மற்றும் தகவமைப்பு விளக்குகள் இடையே காத்திருப்பு நேரம் (விநாடிகள்) மாற்றங்களைப் பயன்படுத்துகிறது. ஒளிரும் தவிர்க்க உதவலாம். ."
+        },
+        "autoreset_control_seconds": {
+          "description": "பல விநாடிகளுக்குப் பிறகு தானாகவே கையேடு கட்டுப்பாட்டை மீட்டமைக்கவும். முடக்க 0 என அமைக்கவும். ."
+        }
+      },
+      "description": "சுவிட்சில் நீங்கள் விரும்பும் எந்த அமைப்புகளையும் மாற்றவும். இங்குள்ள அனைத்து விருப்பங்களும் கட்டமைப்பு ஓட்டத்தில் உள்ளதைப் போலவே இருக்கும்."
+    },
+    "apply": {
+      "description": "தற்போதைய தகவமைப்பு லைட்டிங் அமைப்புகளை விளக்குகளுக்கு பயன்படுத்துகிறது.",
+      "fields": {
+        "entity_id": {
+          "description": "விண்ணப்பிக்க அமைப்புகளுடன் சுவிட்சின் `ENTITY_ID`. ."
+        },
+        "lights": {
+          "description": "அமைப்புகளைப் பயன்படுத்த ஒரு ஒளி (அல்லது விளக்குகளின் பட்டியல்). ."
+        },
+        "transition": {
+          "description": "விளக்குகள் மாறும்போது, நொடிகளில் மாற்றத்தின் காலம். ."
+        },
+        "adapt_brightness": {
+          "description": "ஒளியின் பிரகாசத்தை மாற்றியமைக்க வேண்டுமா. ."
+        },
+        "adapt_color": {
+          "description": "துணை விளக்குகளில் வண்ணத்தை மாற்றியமைக்க வேண்டுமா. ."
+        },
+        "prefer_rgb_color": {
+          "description": "முடிந்தவரை ஒளி வண்ண வெப்பநிலையை விட RGB வண்ண சரிசெய்தலை விரும்பலாமா. ."
+        },
+        "turn_on_lights": {
+          "description": "தற்போது முடக்கப்பட்ட விளக்குகளை இயக்க வேண்டுமா. ."
+        }
+      }
+    }
+  },
+  "title": "தகவமைப்பு விளக்குகள்",
+  "config": {
+    "step": {
+      "user": {
+        "title": "தகவமைப்பு விளக்கு உதாரணத்திற்கு ஒரு பெயரைத் தேர்வுசெய்க",
+        "description": "ஒவ்வொரு நிகழ்விலும் பல விளக்குகள் இருக்கலாம்!"
+      }
+    },
+    "abort": {
+      "already_configured": "இந்த சாதனம் ஏற்கனவே கட்டமைக்கப்பட்டுள்ளது"
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "title": "தகவமைப்பு விளக்கு விருப்பங்கள்",
+        "description": "தகவமைப்பு விளக்கு கூறுகளை உள்ளமைக்கவும். விருப்பப் பெயர்கள் YAML அமைப்புகளுடன் சீரமைக்கப்படுகின்றன. இந்த உள்ளீட்டை நீங்கள் YAML இல் வரையறுத்திருந்தால், இங்கே எந்த விருப்பங்களும் தோன்றாது. அளவுரு விளைவுகளை நிரூபிக்கும் ஊடாடும் வரைபடங்களுக்கு, [இந்த வலை பயன்பாடு]({webapp_url}) ஐப் பார்வையிடவும். மேலும் விவரங்களுக்கு, [அதிகாரப்பூர்வ ஆவணங்கள்]({docs_url}) ஐப் பார்க்கவும்.",
+        "data": {
+          "lights": "விளக்குகள்: கட்டுப்படுத்தப்பட வேண்டிய ஒளி நிறுவனம்_டுகளின் பட்டியல் (காலியாக இருக்கலாம்). .",
+          "min_brightness": "min_brightness: குறைந்தபட்ச ஒளி விழுக்காடு. .",
+          "max_brightness": "அதிகபட்ச பிரகாசம்: அதிகபட்ச ஒளி விழுக்காடு. .",
+          "min_color_temp": "min_color_temp: கெல்வினில் வெப்பமான வண்ண வெப்பநிலை. .",
+          "max_color_temp": "MAX_COLOR_TEMP: கெல்வினில் குளிரான வண்ண வெப்பநிலை. ."
+        },
+        "data_description": {
+          "interval": "விளக்குகளை மாற்றியமைக்க அதிர்வெண், நொடிகளில். .",
+          "transition": "விளக்குகள் மாறும்போது, நொடிகளில் மாற்றத்தின் காலம். .",
+          "sleep_brightness": "தூக்க பயன்முறையில் விளக்குகளின் ஒளி விழுக்காடு. .",
+          "sleep_color_temp": "ச்லீப் பயன்முறையில் வண்ண வெப்பநிலை (கெல்வினில் `SLEEP_RGB_OR_COLOR_TEMP` என்பது` color_temp` ஆக இருக்கும்போது பயன்படுத்தப்படுகிறது). ."
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "bey_rgb_color: முடிந்தவரை ஒளி வண்ண வெப்பநிலையை விட RGB வண்ண சரிசெய்தலை விரும்பலாமா. .",
+              "transition_until_sleep": "Transition_until_sleep: இயக்கப்பட்டால், தகவமைப்பு விளக்குகள் தூக்க அமைப்புகளை குறைந்தபட்சமாகக் கருதும், சூரிய அச்தமனத்திற்குப் பிறகு இந்த மதிப்புகளுக்கு மாறும். .",
+              "take_over_control": "Take_over_control: விளக்குகள் இயக்கத்தில் இருக்கும்போது மற்றொரு சான்று `லைட்.டர்ன்_ஓஎன்` என்று அழைத்தால் தகவமைப்பு விளக்குகளை முடக்கு. இது `ஓமாசிச்டன்ட்.பிடேட்_என்டிட்டி` ஒவ்வொரு` இடைவெளியையும் 'என்று அழைக்கிறது என்பதை நினைவில் கொள்க! .",
+              "detect_non_ha_changes": "கண்டறிதல்_நான்_ஆ_சேஞ்ச்ச்: `விளக்கு அல்லாத. டர்ன்_ஓஎன்` மாநில மாற்றங்களுக்கான தழுவல்களைக் கண்டறிந்து நிறுத்துகிறது. `Take_over_control` இயக்கப்பட்டது. 🕵œ எச்சரிக்கை: ⚠œ சில விளக்குகள் ஒரு 'ஆன்' நிலையை பொய்யாகக் குறிக்கக்கூடும், இதனால் விளக்குகள் எதிர்பாராத விதமாக இயக்கப்படலாம். இதுபோன்ற சிக்கல்களை நீங்கள் சந்தித்தால் இந்த அம்சத்தை முடக்கு.",
+              "only_once": "மட்டும்_இன்: விளக்குகள் இயக்கப்படும்போது மட்டுமே (`உண்மை`) மாற்றியமைக்கும்போது அல்லது அவற்றைத் தழுவிக்கொள்ளுங்கள் (` தவறு`). .",
+              "adapt_only_on_bare_turn_on": "சரிசெய்_only_on_bare_turn_on: ஆரம்பத்தில் விளக்குகளை இயக்கும்போது. `உண்மை` என அமைக்கப்பட்டால், வண்ணம் அல்லது பிரகாசத்தைக் குறிப்பிடாமல்` லைட்.டர்ன்_ஓஎன்` செயல்படுத்தப்பட்டால் மட்டுமே அல் மாற்றியமைக்கிறது. ❌🌈 இது எ.கா., ஒரு காட்சியைச் செயல்படுத்தும்போது தழுவலைத் தடுக்கிறது. `தவறு` என்றால், ஆரம்ப` சேவை_டா` இல் நிறம் அல்லது ஒளி இருப்பதைப் பொருட்படுத்தாமல் AL மாற்றியமைக்கிறது. `Take_over_control` இயக்கப்பட்டது. . 🕵️",
+              "separate_turn_on_commands": "தனித்தனி_டர்ன்_ஆன்_காமண்ட்ச்: சில ஒளி வகைகளுக்கு தேவைப்படும் வண்ணம் மற்றும் பிரகாசத்திற்கான தனித்தனி `லைட்.டர்ன்_ஓஎன்` அழைப்புகளைப் பயன்படுத்தவும். .",
+              "skip_redundant_commands": "Skip_redundant_commands: தழுவல் கட்டளைகளை அனுப்புவதைத் தவிர்க்கவும், அதன் இலக்கு நிலை ஏற்கனவே ஒளியின் அறியப்பட்ட நிலைக்கு சமம். பிணையம் போக்குவரத்தை குறைக்கிறது மற்றும் சில சூழ்நிலைகளில் தழுவல் மறுமொழியை மேம்படுத்துகிறது. ஆ இன் பதிவு செய்யப்பட்ட நிலையுடன் இயற்பியல் ஒளி நிலைகள் ஒத்திசைவிலிருந்து வெளியேறினால் அது காணக்கூடியது.",
+              "intercept": "இடைமறிப்பு: உடனடி வண்ணம் மற்றும் பிரகாசமான தழுவலை செயல்படுத்த `ஒளி. Color வண்ணம் மற்றும் பிரகாசத்துடன் `ஒளி.",
+              "multi_light_intercept": "Mulli_light_intect: பல விளக்குகளை குறிவைக்கும் `light.turn_on` அழைப்புகளை இடைமறிக்கவும் மாற்றவும். ➗⚠œ இது ஒரு `லைட்.டர்ன்_ஒன்` அழைப்பை பல அழைப்புகளாக பிரிக்கக்கூடும், எ.கா., விளக்குகள் வெவ்வேறு சுவிட்சுகளில் இருக்கும்போது. இயக்கப்பட வேண்டும் `இடைமறிப்பு` தேவை.",
+              "include_config_in_attributes": "அடங்கும்_கான்ஃபிக்_இன்_அட்ரிபியூட்: `உண்மை` என அமைக்கப்பட்டிருக்கும் போது வீட்டு உதவியாளரின் சுவிட்சில் உள்ள பண்புகளாக அனைத்து விருப்பங்களையும் காட்டுங்கள். ."
+            },
+            "data_description": {
+              "initial_transition": "விளக்குகள் `ஆஃப்` முதல்` ஆன் `வரை நொடிகளில் மாறும் போது முதல் மாற்றத்தின் காலம். .",
+              "sleep_rgb_or_color_temp": "தூக்க பயன்முறையில் `\" rgb_color \"` அல்லது `\" Color_Temp \"key ஐப் பயன்படுத்தவும். .",
+              "sleep_rgb_color": "தூக்க பயன்முறையில் RGB வண்ணம் (`SLEEP_RGB_OR_COLOR_TEMP`\" RGB_COLOR \"ஆக இருக்கும்போது பயன்படுத்தப்படுகிறது). .",
+              "sleep_transition": "\"தூக்க பயன்முறை\" நொடிகளில் மாற்றப்படும்போது மாற்றத்தின் காலம். .",
+              "sunrise_time": "சூரிய உதயத்திற்கு ஒரு நிலையான நேரத்தை (HH: MM: SS) அமைக்கவும். .",
+              "min_sunrise_time": "ஆரம்பகால மெய்நிகர் சூரிய உதய நேரத்தை (HH: MM: SS) அமைக்கவும், பின்னர் சூரிய உதயங்களை அனுமதிக்கிறது. .",
+              "max_sunrise_time": "ஆரம்பகால சூரிய உதயத்தை அனுமதிக்கும் அண்மைக் கால மெய்நிகர் சூரிய தோன்றுகை நேரத்தை (HH: MM: SS) அமைக்கவும். .",
+              "sunrise_offset": "விநாடிகளில் நேர்மறை அல்லது எதிர்மறை ஆஃப்செட் மூலம் சூரிய தோன்றுகை நேரத்தை சரிசெய்யவும். .",
+              "sunset_time": "சூரிய அச்தமனத்திற்கு ஒரு நிலையான நேரத்தை (HH: MM: SS) அமைக்கவும். .",
+              "min_sunset_time": "ஆரம்பகால மெய்நிகர் சூரிய மறைவு நேரத்தை (HH: MM: SS) அமைக்கவும், பின்னர் சூரிய அச்தமனங்களை அனுமதிக்கிறது. .",
+              "max_sunset_time": "முந்தைய சூரிய அச்தமனங்களை அனுமதிக்கும் அண்மைக் கால மெய்நிகர் சன்செட் நேரத்தை (HH: MM: SS) அமைக்கவும். .",
+              "sunset_offset": "விநாடிகளில் நேர்மறை அல்லது எதிர்மறை ஆஃப்செட் மூலம் சூரிய மறைவு நேரத்தை சரிசெய்யவும். .",
+              "brightness_mode": "பயன்படுத்த பிரகாசமான முறை. சாத்தியமான மதிப்புகள் `இயல்புநிலை`,` லீனியர்`, மற்றும் `டான்` (` பிரகாசம்_மோட்_ நேரம்_டார்க்` மற்றும் `பிரகாசம்_மோட்_மட்_லிட்` ஆகியவற்றைப் பயன்படுத்துகின்றன). .",
+              "brightness_mode_time_dark": ". .",
+              "brightness_mode_time_light": ". ..",
+              "autoreset_control_seconds": "பல விநாடிகளுக்குப் பிறகு தானாகவே கையேடு கட்டுப்பாட்டை மீட்டமைக்கவும். முடக்க 0 என அமைக்கவும். .",
+              "send_split_delay": "ஒரே நேரத்தில் ஒளி மற்றும் வண்ண அமைப்பை ஆதரிக்காத விளக்குகளுக்கு `தனி_டர்ன்_ஆன்_காமண்ட்ச்` இடையே நேரந்தவறுகை (எம்.எச்). .",
+              "adapt_delay": "லைட் டர்ன் மற்றும் தகவமைப்பு விளக்குகள் இடையே காத்திருப்பு நேரம் (விநாடிகள்) மாற்றங்களைப் பயன்படுத்துகிறது. ஒளிரும் தவிர்க்க உதவலாம். ."
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "தவறான விருப்பம்",
+      "entity_missing": "ஒன்று அல்லது அதற்கு மேற்பட்ட தேர்ந்தெடுக்கப்பட்ட ஒளி நிறுவனங்கள் வீட்டு உதவியாளரிடமிருந்து காணவில்லை"
+    }
+  }
+}

custom_components/adaptive_lighting/translations/tr.json

@@ -0,0 +1,210 @@
+{
+  "title": "Akıllı Aydınlatma",
+  "options": {
+    "step": {
+      "init": {
+        "title": "Akıllı Aydınlatma seçenekleri",
+        "data": {
+          "lights": "`lights`: Kontrol edilecek ışıkların entity_id listesi (boş bırakılabilir). 🌟",
+          "min_brightness": "min_brightness: Minimum parlaklık yüzdesi.💡",
+          "max_brightness": "`max_brightness`: Maksimum parlaklık yüzdesi. 💡",
+          "min_color_temp": "`min_color_temp`: En yüksek (sıcak) renk sıcaklığı (Kelvin cinsinden). 🔥",
+          "max_color_temp": "`max_color_temp`: En düşük renk sıcaklığı (Kelvin cinsinden). ❄️"
+        },
+        "data_description": {
+          "interval": "Işıkların uyarlanma sıklığı (saniye cinsinden). 🔄",
+          "transition": "Işıklar değişirken geçiş süresi (saniye cinsinden). 🕑",
+          "sleep_brightness": "Uyku modundayken ışıkların parlaklık yüzdesi 😴",
+          "sleep_color_temp": "Uyku modunda renk sıcaklığı ( `sleep_rgb_or_color_temp` `color_temp` olarak ayarlandığında kullanılır) Kelvin cinsinden. 😴"
+        },
+        "description": "Bir Adaptive Lighting bileşenini yapılandırın. Seçenek adları YAML ayarlarıyla uyumludur. Eğer bu girdiyi YAML’da tanımladıysanız, burada seçenekler görünmez.  \nParametrelerin etkilerini gösteren etkileşimli grafikler için [bu web uygulamasını]({webapp_url}) ziyaret edebilirsiniz. Daha fazla bilgi için [resmi dokümantasyona]({docs_url}) bakın.",
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "`prefer_rgb_color`: Mümkünse ışık renk sıcaklığı yerine RGB renk ayarını tercih edip etmeyeceğini belirler. 🌈",
+              "transition_until_sleep": "`transition_until_sleep`: Etkinleştirildiğinde, Adaptive Lighting uyku ayarlarını minimum değer olarak kabul eder ve gün batımından sonra bu değerlere geçiş yapar. 🌙",
+              "take_over_control": "`take_over_control`: Işıklar açıkken ve uyarlanırken başka bir kaynaktan `light.turn_on` çağrılırsa Adaptive Lighting’i devre dışı bırakır. Dikkat: Bu işlem her `interval` süresinde `homeassistant.update_entity` çağrısı yapar! 🔒",
+              "detect_non_ha_changes": "`detect_non_ha_changes`: `light.turn_on` dışındaki durum değişikliklerini algılar ve uyarlamayı durdurur. Bu ayarın çalışması için `take_over_control` etkin olmalıdır. 🕵️\nDikkat: ⚠️ Bazı ışıklar yanlışlıkla “açık” durumunu bildirebilir, bu da ışıkların beklenmedik şekilde açılmasına yol açabilir. Böyle bir durumla karşılaşırsanız bu özelliği devre dışı bırakın.",
+              "only_once": "`only_once`: Işıkları yalnızca açıldıklarında mı uyarlasın (`true`), yoksa sürekli uyarlamaya devam mı etsin (`false`). 🔄",
+              "adapt_only_on_bare_turn_on": "Işıklar açıldığında geçerlidir. `true` olarak ayarlanırsa, eklenti yalnızca `light.turn_on` işlemi renk veya parlaklık belirtilmeden çağrıldığında uyarlama yapar (örneğin sahne etkinleştirmelerinde uyarlama yapılmaz).  ❌🌈\n`false` olarak ayarlanırsa, renk veya parlaklık belirtilmiş olsa bile uyarlama yapılır. Bu ayarın çalışması için `take_over_control` etkin olmalıdır. 🕵️",
+              "separate_turn_on_commands": "`separate_turn_on_commands`: Renk ve parlaklık için ayrı `light.turn_on` çağrıları kullanır; bazı ışık türleri için gereklidir. 🔀",
+              "skip_redundant_commands": "`skip_redundant_commands`: Hedef durumu ışığın bilinen durumu ile aynı olan uyarlama komutlarını atlar. Ağ trafiğini azaltır ve bazı durumlarda uyarlamanın yanıt hızını artırır. 📉  \nFiziksel ışık durumları HA’daki kaydedilen durumla senkronize değilse devre dışı bırakın.",
+              "intercept": "`intercept`: `light.turn_on` çağrılarını yakalar ve renk ile parlaklığın anında uyarlanmasını sağlar. 🏎️ Renk ve parlaklığı desteklemeyen ışıklar için devre dışı bırakın.",
+              "multi_light_intercept": "`multi_light_intercept`: Birden fazla ışığı hedefleyen `light.turn_on` çağrılarını yakalar ve uyarlama yapar. ➗⚠️ Bu, örneğin ışıklar farklı anahtarlardaysa tek bir `light.turn_on` çağrısının birden fazla çağrıya bölünmesine yol açabilir. `intercept` etkin olmalıdır.",
+              "include_config_in_attributes": "`include_config_in_attributes`: `true` olarak ayarlandığında, tüm seçenekleri Home Assistant’ta anahtarın attribute’ları olarak gösterir. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Işıklar `off` durumundan `on` durumuna geçerken ilk geçişin süresi (saniye cinsinden). ⏲️",
+              "sleep_rgb_or_color_temp": "Uyku modunda `\"rgb_color\"` veya `\"color_temp\"` kullanın. 🌙",
+              "sleep_rgb_color": "Uyku modunda RGB renk ( `sleep_rgb_or_color_temp` \"rgb_color\" olarak ayarlandığında kullanılır). 🌈",
+              "sleep_transition": "“Uyku modu” açılıp kapatıldığında geçiş süresi (saniye cinsinden). 😴",
+              "sunrise_time": "Gün doğumu için sabit bir saat (SS:DD:YY) belirleyin. 🌅",
+              "min_sunrise_time": "En erken sanal gün doğumu saatini (SS:DD:YY) belirleyin; daha geç gün doğumlarına izin verir. 🌅",
+              "max_sunrise_time": "En geç sanal gün doğumu saatini (SS:DD:YY) belirleyin; daha erken gün doğumlarına izin verir. 🌅",
+              "sunrise_offset": "Gün doğumu saatini, saniye cinsinden pozitif veya negatif bir kaydırma ile ayarlayın. ⏰",
+              "sunset_time": "Gün batımı için sabit bir saat (SS:DD:YY) belirleyin. 🌇",
+              "min_sunset_time": "En erken sanal gün batımı saatini (SS:DD:YY) belirleyin; daha geç gün batımlarına izin verir. 🌇",
+              "max_sunset_time": "En geç sanal gün batımı saatini (SS:DD:YY) belirleyin; daha erken gün batımlarına izin verir. 🌇",
+              "sunset_offset": "Gün batımı saatini, saniye cinsinden pozitif veya negatif bir kaydırma ile ayarlayın. ⏰",
+              "brightness_mode": "Kullanılacak parlaklık modunu belirtir. Olası değerler: `default`, `linear` ve `tanh` (`brightness_mode_time_dark` ve `brightness_mode_time_light` ayarlarını kullanır). 📈",
+              "brightness_mode_time_dark": "(`brightness_mode='default'` ise göz ardı edilir) Gün doğumu/gün batımı öncesi/sonrası parlaklığı kademeli olarak artırma/azaltma süresi (saniye cinsinden). 📈📉",
+              "brightness_mode_time_light": "(`brightness_mode='default'` ise göz ardı edilir) Gün doğumu/gün batımı öncesi/sonrası parlaklığı kademeli olarak artırma/azaltma süresi (saniye cinsinden). 📈📉",
+              "autoreset_control_seconds": "Manuel kontrolü belirtilen saniye sonunda otomatik olarak sıfırlar. Devre dışı bırakmak için 0 olarak ayarlayın. ⏲️",
+              "send_split_delay": "Parlaklık ve renk ayarını aynı anda desteklemeyen ışıklar için `separate_turn_on_commands` arasındaki gecikme (ms). ⏲️",
+              "adapt_delay": "Işık açıldıktan sonra Adaptive Lighting’in değişiklikleri uygulamasına kadar bekleme süresi (saniye cinsinden). Titremeyi önlemeye yardımcı olabilir. ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "Geçersiz seçenek",
+      "entity_missing": "Seçilen bir veya birden fazla ışık entity’si Home Assistant’ta bulunamadı."
+    }
+  },
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "only_once": {
+          "description": "Işıkları yalnızca açıkken (`true`) uyarla, veya sürekli olarak uyarlamaya devam et (`false`).🔄"
+        },
+        "sunrise_offset": {
+          "description": "Gün doğumu saatini, saniye cinsinden pozitif veya negatif bir kaydırma ile ayarlayın. ⏰"
+        },
+        "sunset_offset": {
+          "description": "Gün batımı saatini, saniye cinsinden pozitif veya negatif bir kaydırma ile ayarlayın. ⏰"
+        },
+        "autoreset_control_seconds": {
+          "description": "Manuel kontrolü belirtilen saniye sonunda otomatik olarak sıfırlar. Devre dışı bırakmak için 0 olarak ayarlayın. ⏲️"
+        },
+        "sleep_brightness": {
+          "description": "Uyku modundayken ışıkların parlaklık yüzdesi 😴"
+        },
+        "max_color_temp": {
+          "description": "Kelvin cinsinden en düşük renk sıcaklığı. ❄️"
+        },
+        "sleep_color_temp": {
+          "description": "Uyku modunda renk sıcaklığı ( `sleep_rgb_or_color_temp` `color_temp` olarak ayarlandığında kullanılır) Kelvin cinsinden. 😴"
+        },
+        "send_split_delay": {
+          "description": "Parlaklık ve renk ayarını aynı anda desteklemeyen ışıklar için `separate_turn_on_commands` arasındaki gecikme (ms). ⏲️"
+        },
+        "detect_non_ha_changes": {
+          "description": "`light.turn_on` dışındaki durum değişikliklerini algılar ve uyarlamayı durdurur. Bu ayarın çalışması için `take_over_control` etkin olmalıdır. 🕵️  \nDikkat: ⚠️ Bazı ışıklar yanlışlıkla “açık” durumunu bildirebilir, bu da ışıkların beklenmedik şekilde açılmasına neden olabilir. Böyle bir durumda bu özelliği devre dışı bırakın."
+        },
+        "take_over_control": {
+          "description": "Işıklar açıkken ve uyarlanırken başka bir kaynaktan `light.turn_on` çağrılırsa Adaptive Lighting’i devre dışı bırakır. Dikkat: Bu işlem her `interval` süresinde `homeassistant.update_entity` çağrısı yapar! 🔒"
+        },
+        "initial_transition": {
+          "description": "Işıklar `off` durumundan `on` durumuna geçerken ilk geçişin süresi (saniye cinsinden). ⏲️"
+        },
+        "transition": {
+          "description": "Işıklar değişirken geçiş süresi (saniye cinsinden). 🕑"
+        },
+        "sleep_transition": {
+          "description": "“Uyku modu” açılıp kapatıldığında geçiş süresi (saniye cinsinden). 😴"
+        },
+        "entity_id": {
+          "description": "Anahtarın Entity ID’si. 📝"
+        },
+        "max_brightness": {
+          "description": "Maksimum parlaklık yüzdesi.💡"
+        },
+        "min_brightness": {
+          "description": "Minimum parlaklık yüzdesi.💡"
+        },
+        "sleep_rgb_color": {
+          "description": "Uyku modunda RGB renk ( `sleep_rgb_or_color_temp` \"rgb_color\" olarak ayarlandığında kullanılır). 🌈"
+        },
+        "sunrise_time": {
+          "description": "Gün doğumu için sabit bir saat (SS:DD:YY) belirleyin. 🌅"
+        },
+        "sunset_time": {
+          "description": "Gün batımı için sabit bir saat (SS:DD:YY) belirleyin. 🌇"
+        },
+        "use_defaults": {
+          "description": "Bu servis çağrısında belirtilmeyen varsayılan değerleri ayarlar. Seçenekler:  \n- `current` (varsayılan, mevcut değerleri korur)  \n- `factory` (belgelendirilmiş varsayılanlara sıfırlar)  \n- `configuration` (anahtar yapılandırma varsayılanlarına döner) ⚙️"
+        },
+        "min_sunset_time": {
+          "description": "En erken sanal gün batımı saatini (SS:DD:YY) belirleyin; daha geç gün batımlarına izin verir. 🌇"
+        },
+        "max_sunrise_time": {
+          "description": "En geç sanal gün doğumu saatini (SS:DD:YY) belirleyin; daha erken gün doğumlarına izin verir. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "`true` olarak ayarlandığında, tüm seçenekleri Home Assistant’ta anahtarın attribute’ları olarak gösterir. 📝"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Uyku modunda `\"rgb_color\"` veya `\"color_temp\"` kullanın. 🌙"
+        },
+        "separate_turn_on_commands": {
+          "description": "Renk ve parlaklık için ayrı `light.turn_on` çağrıları kullanın; bazı ışık türleri için gereklidir. 🔀"
+        },
+        "min_color_temp": {
+          "description": "En yüksek (sıcak) renk sıcaklığı (Kelvin cinsinden). 🔥"
+        },
+        "prefer_rgb_color": {
+          "description": "Mümkün olduğunda ışık renk sıcaklığı yerine RGB renk ayarını tercih edip etmeyeceğini belirler. 🌈"
+        },
+        "turn_on_lights": {
+          "description": "Şu anda kapalı olan ışıkların açılıp açılmayacağını belirler. 🔆"
+        },
+        "adapt_delay": {
+          "description": "Işık açıldıktan sonra Adaptive Lighting’in değişiklikleri uygulamasına kadar bekleme süresi (saniye cinsinden). Titremeyi önlemeye yardımcı olabilir. ⏲️"
+        }
+      },
+      "description": "Anahtardaki tüm ayarları dilediğiniz gibi değiştirebilirsiniz. Buradaki seçeneklerin hepsi, yapılandırma akışındakilerle aynıdır."
+    },
+    "apply": {
+      "fields": {
+        "lights": {
+          "description": "Ayarları bir veya birden fazla ışığa uygula.💡"
+        },
+        "transition": {
+          "description": "Işıklar değişirken geçiş süresi (saniye cinsinden). 🕑"
+        },
+        "entity_id": {
+          "description": "Uygulanacak ayarların bulunduğu anahtarın `entity_id`’si. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Işığın parlaklığının uyarlanıp uyarlanmayacağını belirler. 🌞"
+        },
+        "adapt_color": {
+          "description": "Destekleyen ışıklarda rengin uyarlanıp uyarlanmayacağını belirler. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Mümkün olduğunda ışık renk sıcaklığı yerine RGB renk ayarını tercih edip etmeyeceğini belirler. 🌈"
+        },
+        "turn_on_lights": {
+          "description": "Şu anda kapalı olan ışıkların açılıp açılmayacağını belirler. 🔆"
+        }
+      },
+      "description": "Şu anki Akıllı Işıklandırma ayarlarını ışıklara uygular."
+    },
+    "set_manual_control": {
+      "fields": {
+        "lights": {
+          "description": "Işıkların entity_id(leri). Belirtilmezse, anahtardaki tüm ışıklar seçilir. 💡"
+        },
+        "entity_id": {
+          "description": "Işığın “manuel olarak kontrol edildiğini” işaretlemek veya kaldırmak için kullanılacak anahtarın `entity_id`’si. 📝"
+        },
+        "manual_control": {
+          "description": "Işığı “manuel kontrol” listesinden eklemek (`true`) veya çıkarmak (`false`) için kullanılır. 🔒"
+        }
+      },
+      "description": "Bir ışığın 'manuel olarak kontrol' edilip edilmediğini işaretleyin."
+    }
+  },
+  "config": {
+    "step": {
+      "user": {
+        "title": "Akıllı ışıklandırma örneği için bir ad seçin.",
+        "description": "Her örnek birden fazla ışık içerebilir!"
+      }
+    },
+    "abort": {
+      "already_configured": "Bu cihaz zaten ayarlanmış."
+    }
+  }
+}

custom_components/adaptive_lighting/translations/uk.json

@@ -8,6 +8,13 @@
         "data": {
           "name": "Ім’я"
         }
+      },
+      "menu": {
+        "data": {
+          "action": "Дія"
+        },
+        "title": "Створити або дублювати",
+        "description": "Ви хочете створити новий екземпляр чи скопіювати існуючий?"
       }
     },
     "abort": {
@@ -21,24 +28,63 @@
         "description": "Всі налаштування компонента адаптивного освітлення. Назви опцій відповідають налаштуванням у YAML. Опції не відображаються, якщо ви вже визначили їх у компоненті adaptive_lighting вашої YAML-конфігурації.",
         "data": {
           "lights": "прилади",
-          "initial_transition": "initial_transition: Коли прилад вимикається (off), вмикається (on), або змінює 'sleep_state'. (секунди)",
           "interval": "interval: Час між оновленнями перемикача. (секунди)",
-          "max_brightness": "max_brightness: Найвища яскравість світла під час циклу. (%)",
-          "max_color_temp": "max_color_temp: Найхолодніший відтінок циклу кольорової температури. (Кельвін)",
+          "transition": "Час переходу, який застосовується до освітлення (секунди)",
           "min_brightness": "min_brightness: Найнижча яскравість світла під час циклу. (%)",
+          "max_brightness": "max_brightness: Найвища яскравість світла під час циклу. (%)",
           "min_color_temp": "min_color_temp: Найтепліший відтінок циклу кольорової температури. (%)",
-          "only_once": "only_once: Адаптувати світло лише після початкового увімкнення.",
-          "prefer_rgb_color": "prefer_rgb_color: Використовувати 'rgb_color' замість 'color_temp', коли можливо.",
-          "separate_turn_on_commands": "separate_turn_on_commands: Окремі команди для кожного атрибута (колір, яскравість, тощо.) в 'light.turn_on' (необхідні для деяких приладів).",
+          "max_color_temp": "max_color_temp: Найхолодніший відтінок циклу кольорової температури. (Кельвін)",
           "sleep_brightness": "sleep_brightness: Налаштування яскравості для Режиму сну. (%)",
-          "sleep_color_temp": "sleep_color_temp: Температура кольору для Режиму сну. (Кельвін)",
-          "sunrise_offset": "sunrise_offset: Як за довго до(-) або після(+) визначати точку сходу сонця для циклу (+/- секунд)",
-          "sunrise_time": "sunrise_time: Ручний перезапис часу сходу сонця, якщо 'None', тоді використовується час сходу сонця у вашій локації (HH:MM:SS)",
-          "sunset_offset": "sunset_offset: Як за довго до(-) або після(+) визначати точку заходу сонця для циклу (+/- секунд)",
-          "sunset_time": "sunset_time: Ручний перезапис часу заходу сонця, якщо 'None', тоді використовується час заходу сонця у вашій локації (HH:MM:SS)",
-          "take_over_control": "take_over_control: Якщо що-небудь, окрім Адаптивного освітлення, викликає 'light.turn_on', коли світло вже увімкнено, чи адаптувати освітлення допоки світло (або перемикач) перемкнеться (off -> on).",
-          "detect_non_ha_changes": "detect_non_ha_changes: виявляти всі зміни >10% до освітлення (включаючи ті, що зроблені поза HA), вимагає, щоб 'take_over_control' був включений (виклик 'homeassistant.update_entity' кожного оновлення 'interval'!)",
-          "transition": "Час переходу, який застосовується до освітлення (секунди)"
+          "sleep_color_temp": "sleep_color_temp: Температура кольору для Режиму сну. (Кельвін)"
+        },
+        "data_description": {
+          "interval": "Частота адаптації освітлення, у секундах. 🔄",
+          "transition": "Тривалість переходу, коли світло змінюється, у секундах. 🕑",
+          "sleep_brightness": "Відсоток яскравості світла в режимі сну. 😴",
+          "sleep_color_temp": "Колірна температура в режимі сну (використовується, коли `sleep_rgb_or_color_temp` має значення `color_temp`) у Кельвінах. 😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "initial_transition: Коли прилад вимикається (off), вмикається (on), або змінює 'sleep_state'. (секунди)",
+              "prefer_rgb_color": "prefer_rgb_color: Використовувати 'rgb_color' замість 'color_temp', коли можливо.",
+              "transition_until_sleep": "transition_until_sleep: Коли активовано, адаптивне освітлення буде ставитись до налаштування сну як мінімум, переходячи до цих значень після заходу сонця. 🌙",
+              "sunrise_time": "sunrise_time: Ручний перезапис часу сходу сонця, якщо 'None', тоді використовується час сходу сонця у вашій локації (HH:MM:SS)",
+              "sunrise_offset": "sunrise_offset: Як за довго до(-) або після(+) визначати точку сходу сонця для циклу (+/- секунд)",
+              "sunset_time": "sunset_time: Ручний перезапис часу заходу сонця, якщо 'None', тоді використовується час заходу сонця у вашій локації (HH:MM:SS)",
+              "sunset_offset": "sunset_offset: Як за довго до(-) або після(+) визначати точку заходу сонця для циклу (+/- секунд)",
+              "take_over_control": "take_over_control: Якщо що-небудь, окрім Адаптивного освітлення, викликає 'light.turn_on', коли світло вже увімкнено, чи адаптувати освітлення допоки світло (або перемикач) перемкнеться (off -> on).",
+              "detect_non_ha_changes": "detect_non_ha_changes: виявляти всі зміни >10% до освітлення (включаючи ті, що зроблені поза HA), вимагає, щоб 'take_over_control' був включений (виклик 'homeassistant.update_entity' кожного оновлення 'interval'!)",
+              "only_once": "only_once: Адаптувати світло лише після початкового увімкнення.",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: На початку вмикання світла. Якщо `true`, освітлення адаптується лише якщо `light.turn_on` викликано без вказання кольору чи яскравості. ❌🌈 Це, наприклад, запобігає адаптації, коли сцена активується. Якщо `false`, освітлення адаптується незалежно від наявності кольору чи яскравості у початковому `service_data`. Потребує ввімкнення `take_over_control`. 🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands: Окремі команди для кожного атрибута (колір, яскравість, тощо.) в 'light.turn_on' (необхідні для деяких приладів).",
+              "skip_redundant_commands": "skip_redundant_commands: Пропускати надсилання команд адаптації, цільовий стан яких вже дорівнює відомому стану освітлення. Мінімізує мережевий трафік і покращує швидкість реагування адаптації в деяких ситуаціях. 📉Вимкнути, якщо фізичний стан освітлення не синхронізується із записаним станом HA.",
+              "intercept": "intercept: Перехоплювати та адаптувати виклики увімкнення світла (`light.turn_on`), щоб увімкнути миттєву адаптацію кольору та яскравості. 🏎️ Вимкніть для світла, що не підтримує увімкнення світла (`light.turn_on`) з кольором та яскравістю.",
+              "multi_light_intercept": "multi_light_intercept: Перехоплення та адаптація викликів `light.turn_on`, які спрямовані на кілька світильників. ➗⚠️ Це може призвести до розділення одного виклику `light.turn_on` на кілька викликів, наприклад, коли світильники підключені до різних вимикачів. Потрібно ввімкнути `intercept`.",
+              "include_config_in_attributes": "Включити конфігурацію в атрибути (`include_config_in_attributes`): Показувати всі опції як атрибути на перемикачі в Home Assistant, якщо встановлено значення `true`. 📝"
+            },
+            "data_description": {
+              "initial_transition": "Тривалість першого переходу, коли світло перемикається зі стану вимкнено `off` на увімкнено `on`, у секундах. ⏲️",
+              "sleep_rgb_or_color_temp": "Використовуйте `\"rgb_color\"` або `\"color_temp\"` у режимі сну. 🌙",
+              "sleep_rgb_color": "Колір RGB у режимі сну (використовується, коли `sleep_rgb_or_color_temp` має значення \"rgb_color\"). 🌈",
+              "sleep_transition": "Тривалість переходу, коли режим сну \"sleep mode\" увімкнено, у секундах. 😴",
+              "sunrise_time": "Встановіть фіксований час (ГГ:ХХ:СС) для сходу сонця. 🌅",
+              "min_sunrise_time": "Встановіть найраніший час віртуального сходу сонця (ГГ:ХХ:СС), враховуючи пізніші сходи. 🌅",
+              "max_sunrise_time": "Встановіть найпізніший час віртуального сходу сонця (ГГ:ХХ:СС), враховуючи більш ранні сходи сонця. 🌅",
+              "sunrise_offset": "Змінити час сходу сонця на +/- секунд. ⏰",
+              "sunset_time": "Встановіть фіксований час (ГГ:ХХ:СС) для заходу сонця. 🌇",
+              "min_sunset_time": "Встановіть найраніший час віртуального заходу сонця (ГГ:ХХ:СС), враховуючи пізніші заходи сонця. 🌇",
+              "max_sunset_time": "Встановіть найновіший час віртуального заходу сонця (ГГ:ХХ:СС), враховуючи більш ранні заходи сонця. 🌇",
+              "sunset_offset": "Змінити час заходу сонця на +/- секунд. ⏰",
+              "brightness_mode": "Режим яскравості для використання. Можливі значення: default (стандартний) , linear (лінійний) та tanh (гіперболічний тангенс) (використовує значення brightness_mode_time_dark та brightness_mode_time_light).",
+              "brightness_mode_time_dark": "(Ігнорується, якщо `brightness_mode='default'`) Тривалість у секундах для збільшення/зменшення яскравості до/після сходу/заходу сонця. 📈📉",
+              "brightness_mode_time_light": "(Ігнорується, якщо brightness_mode='default') Тривалість у секундах для збільшення/зменшення яскравості після/до сходу/заходу сонця. 📈📉.",
+              "take_over_control_mode": "Режим призупинення адаптації, коли інші джерела змінюють яскравість та/або колір світла. `pause_all` завжди призупиняє адаптацію як яскравості, так і кольору. `pause_changed` призупиняє адаптацію лише змінених атрибутів та продовжує адаптацію незмінних атрибутів, наприклад, продовжує адаптацію кольору, коли змінювалася лише яскравість.",
+              "autoreset_control_seconds": "Самочинно скидати ручне керування після кількох секунд. Встановіть 0, щоб вимкнути.",
+              "send_split_delay": "Затримка (мс) між `separate_turn_on_commands` (окремі команди увімкнення)  для світла, що не підтримує одночасне налаштування яскравості та кольору. ⏲️",
+              "adapt_delay": "Час очікування (секунди) між увімкненням світла та застосуванням змін системою адаптивного освітлення. Може допомогти уникнути мерехтіння. ⏲️"
+            }
+          }
         }
       }
     },
@@ -46,5 +92,142 @@
       "option_error": "Хибна опція",
       "entity_missing": "Вибраного світла в домашньому помічнику не знайшли"
     }
+  },
+  "services": {
+    "apply": {
+      "description": "Застосовує поточні налаштування Адаптивного освітлення до світильників.",
+      "fields": {
+        "lights": {
+          "description": "Світильник (або список світильників), до яких буде застосовано налаштування. 💡"
+        },
+        "transition": {
+          "description": "Тривалість переходу, коли світло змінюється, у секундах. 🕑"
+        },
+        "entity_id": {
+          "description": "`entity_id` перемикача з налаштуваннями, які потрібно застосувати. 📝"
+        },
+        "adapt_brightness": {
+          "description": "Чи потрібно адаптувати яскравість світла. 🌞"
+        },
+        "adapt_color": {
+          "description": "Чи адаптувати колір допоміжних ламп. 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "Чи надавати перевагу налаштуванню кольору RGB над температурою кольору світла, коли це можливо. 🌈"
+        },
+        "turn_on_lights": {
+          "description": "Чи вмикати світло, яке наразі вимкнене. 🔆"
+        }
+      }
+    },
+    "change_switch_settings": {
+      "fields": {
+        "sunrise_offset": {
+          "description": "Змінити час сходу сонця на +/- секунд. ⏰"
+        },
+        "sunset_offset": {
+          "description": "Змінити час заходу сонця на +/- секунд. ⏰"
+        },
+        "autoreset_control_seconds": {
+          "description": "Самочинно скидати ручне керування після кількох секунд. Встановіть 0, щоб вимкнути."
+        },
+        "only_once": {
+          "description": "Приладжувати освітлення тільки тоді, коли воно ввімкнено (`true`) чи продовжувати завжди (`false`). 🔄"
+        },
+        "sleep_brightness": {
+          "description": "Відсоток яскравості світла в режимі сну. 😴"
+        },
+        "take_over_control": {
+          "description": "Вимкнути Адаптивне освітлення, якщо інше джерело викликає `light.turn_on`, коли світло увімкнене та адаптується. Зауважте, що це викликає `homeassistant.update_entity` щокожного заданого інтервалу `interval`! 🔒"
+        },
+        "entity_id": {
+          "description": "Ідентифікатор (ID) перемикача. 📝"
+        },
+        "initial_transition": {
+          "description": "Тривалість першого переходу, коли світло перемикається зі стану вимкнено `off` на увімкнено `on`, у секундах. ⏲️"
+        },
+        "sleep_transition": {
+          "description": "Тривалість переходу, коли режим сну \"sleep mode\" увімкнено, у секундах. 😴"
+        },
+        "max_color_temp": {
+          "description": "Найхолодніша колірна температура в Кельвінах. ❄️"
+        },
+        "max_brightness": {
+          "description": "Максимальний відсоток яскравості. 💡"
+        },
+        "min_brightness": {
+          "description": "Мінімальний відсоток яскравості. 💡"
+        },
+        "send_split_delay": {
+          "description": "Затримка (мс) між `separate_turn_on_commands` (окремі команди увімкнення)  для світла, що не підтримує одночасне налаштування яскравості та кольору. ⏲️"
+        },
+        "sleep_color_temp": {
+          "description": "Колірна температура в режимі сну (використовується, коли `sleep_rgb_or_color_temp` має значення `color_temp`) в Кельвінах. 😴"
+        },
+        "detect_non_ha_changes": {
+          "description": "Виявляє та припиняє адаптації для змін стану, що не є `light.turn_on`. Потребує увімкнення `take_over_control`. 🕵️ Обережно: ⚠️ Деякі лампи можуть хибно вказувати на стан \"увімкнено\", що може призвести до неочікуваного ввімкнення ламп. Вимкніть цю функцію, якщо ви зіткнетеся з такими проблемами."
+        },
+        "transition": {
+          "description": "Тривалість переходу, коли світло змінюється, у секундах. 🕑"
+        },
+        "sleep_rgb_color": {
+          "description": "Колір RGB у режимі сну (використовується, коли `sleep_rgb_or_color_temp` має значення \"rgb_color\"). 🌈"
+        },
+        "sunrise_time": {
+          "description": "Встановіть фіксований час (ГГ:ХХ:СС) для сходу сонця. 🌅"
+        },
+        "sunset_time": {
+          "description": "Встановіть фіксований час (ГГ:ХХ:СС) для заходу сонця. 🌇"
+        },
+        "use_defaults": {
+          "description": "Встановлює значення за замовчуванням, не вказані в цьому виклику служби. Параметри: «current» (за замовчуванням, зберігає поточні значення), «factory» (скидає до задокументованих значень за замовчуванням) або «configuration» (повертає до значень за замовчуванням конфігурації комутатора). ⚙️"
+        },
+        "min_sunset_time": {
+          "description": "Встановіть найраніший час віртуального заходу сонця (ГГ:ХХ:СС), враховуючи пізніші заходи сонця. 🌇"
+        },
+        "max_sunrise_time": {
+          "description": "Встановіть найпізніший час віртуального сходу сонця (ГГ:ХХ:СС), враховуючи більш ранні сходи сонця. 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "Показувати всі опції як атрибути перемикача в Домашньому помічнику, якщо встановлено значення `true`. 📝"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "Використовуйте `\"rgb_color\"` або `\"color_temp\"` у режимі сну. 🌙"
+        },
+        "separate_turn_on_commands": {
+          "description": "Використовуйте окремі виклики `light.turn_on` для кольору та яскравості, що необхідно для деяких типів освітлення. 🔀"
+        },
+        "adapt_delay": {
+          "description": "Час очікування (секунди) між увімкненням світла та застосуванням змін системою адаптивного освітлення. Може допомогти уникнути мерехтіння. ⏲️"
+        },
+        "min_color_temp": {
+          "description": "Найтепліша колірна температура в Кельвінах. 🔥"
+        },
+        "prefer_rgb_color": {
+          "description": "Чи надавати перевагу налаштуванню кольору RGB над температурою кольору світла, коли це можливо. 🌈"
+        },
+        "turn_on_lights": {
+          "description": "Чи вмикати світло, яке наразі вимкнене. 🔆"
+        },
+        "take_over_control_mode": {
+          "description": "Режим призупинення адаптації, коли інші джерела змінюють яскравість та/або колір світла. `pause_all` завжди призупиняє адаптацію як яскравості, так і кольору. `pause_changed` призупиняє адаптацію лише змінених атрибутів та продовжує адаптацію незмінних атрибутів, наприклад, продовжує адаптацію кольору, коли змінювалася лише яскравість."
+        }
+      },
+      "description": "Змініть будь-які налаштування, які ви бажаєте, у цьому перемикачі. Усі опції тут такі ж, як і в поточному конфігураційному файлі."
+    },
+    "set_manual_control": {
+      "description": "Позначте, чи світло \"керується вручну\".",
+      "fields": {
+        "lights": {
+          "description": "Ідентифікатор(и) світла (entity_id(s) of lights). Якщо не вказано, вибираються всі лампи у перемикачі. 💡"
+        },
+        "entity_id": {
+          "description": "`entity_id` перемикача, в якому потрібно (зняти) позначку світла як `керованого вручну`. 📝"
+        },
+        "manual_control": {
+          "description": "Додавати (\"true\") чи видаляти (\"false\") світло зі списку \"manual_control\". 🔒"
+        }
+      }
+    }
   }
 }

custom_components/adaptive_lighting/translations/ur.json

@@ -0,0 +1,210 @@
+{
+  "services": {
+    "change_switch_settings": {
+      "fields": {
+        "sleep_brightness": {
+          "description": "نیند کے موڈ میں روشنی کی چمک کا فیصد. 😴"
+        },
+        "detect_non_ha_changes": {
+          "description": "غیر light.turn_on ریاست کی تبدیلیوں کے لئے موافقت کا پتہ لگاتا ہے اور روکتا ہے۔ 'take_over_control' کو فعال کرنے کی ضرورت ہے۔ 🕵️ احتیاط: ⚠️ کچھ لائٹس غلط طور پر 'آن' حالت کی نشاندہی کر سکتی ہیں ، جس کے نتیجے میں لائٹس غیر متوقع طور پر آن ہوسکتی ہیں۔ اگر آپ کو اس طرح کے مسائل کا سامنا کرنا پڑتا ہے تو اس خصوصیت کو غیر فعال کریں۔"
+        },
+        "sunrise_offset": {
+          "description": "طلوع آفتاب کے وقت کو سیکنڈوں میں مثبت یا منفی آفسیٹ کے ساتھ ایڈجسٹ کریں۔ ⏰"
+        },
+        "max_sunrise_time": {
+          "description": "تازہ ترین مجازی طلوع آفتاب کا وقت (ایچ ایچ: ایم ایم: ایس ایس) سیٹ کریں ، جس سے قبل طلوع آفتاب کی اجازت ملتی ہے۔ 🌅"
+        },
+        "sleep_color_temp": {
+          "description": "کیلون میں نیند کے موڈ میں رنگ کا درجہ حرارت (جب 'sleep_rgb_or_color_temp' 'color_temp' ہوتا ہے) میں استعمال ہوتا ہے۔ 😴"
+        },
+        "min_brightness": {
+          "description": "کم سے کم چمک کا فیصد. 💡"
+        },
+        "min_color_temp": {
+          "description": "کیلون میں گرم ترین رنگ کا درجہ حرارت. 🔥"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "نیند کے موڈ میں \"rgb_color\" یا \"color_temp\" کا استعمال کریں۔ 🌙"
+        },
+        "turn_on_lights": {
+          "description": "کیا ان لائٹس کو آن کرنا ہے جو فی الحال بند ہیں۔ 🔆"
+        },
+        "initial_transition": {
+          "description": "پہلی منتقلی کا دورانیہ جب لائٹس سیکنڈوں میں 'بند' سے 'آن' میں تبدیل ہوجاتی ہیں۔ ⏲️"
+        },
+        "entity_id": {
+          "description": "سوئچ کی اینٹیٹی آئی ڈی۔ 📝"
+        },
+        "sunrise_time": {
+          "description": "طلوع آفتاب کے لئے ایک مقررہ وقت (ایچ ایچ: ایم ایم: ایس ایس) مقرر کریں۔ 🌅"
+        },
+        "include_config_in_attributes": {
+          "description": "'سچ' پر سیٹ ہونے پر ہوم اسسٹنٹ میں سوئچ پر تمام اختیارات بطور خصوصیات دکھائیں۔ 📝"
+        },
+        "max_brightness": {
+          "description": "زیادہ سے زیادہ چمک کا فیصد. 💡"
+        },
+        "sleep_rgb_color": {
+          "description": "نیند کے موڈ میں آر جی بی رنگ (جب 'sleep_rgb_or_color_temp' \"rgb_color\" ہوتا ہے تو استعمال کیا جاتا ہے). 🌈"
+        },
+        "take_over_control": {
+          "description": "اگر کوئی دوسرا ذریعہ 'light.turn_on' کا نام دیتا ہے تو ایڈاپٹو لائٹنگ کو غیر فعال کریں جب لائٹس آن ہیں اور اسے اپنایا جارہا ہے۔ نوٹ کریں کہ یہ ہر 'وقفے' کو 'homeassistant.update_entity' کہتا ہے! 🔒"
+        },
+        "sleep_transition": {
+          "description": "منتقلی کا دورانیہ جب \"نیند کا موڈ\" سیکنڈوں میں طے کیا جاتا ہے۔ 😴"
+        },
+        "autoreset_control_seconds": {
+          "description": "کئی سیکنڈ کے بعد دستی کنٹرول کو خود بخود ری سیٹ کریں۔ غیر فعال کرنے کے لئے 0 پر سیٹ کریں۔ ⏲️"
+        },
+        "adapt_delay": {
+          "description": "لائٹ آن ہونے اور ایڈاپٹو لائٹنگ کے درمیان انتظار کا وقت (سیکنڈ) تبدیلیاں لاگو کرتا ہے۔ جھلکنے سے بچنے میں مدد مل سکتی ہے۔ ⏲️"
+        },
+        "only_once": {
+          "description": "روشنیوں کو صرف اس وقت ڈھالیں جب وہ آن ہوں (`سچ`) یا انہیں ڈھالتے رہیں (`غلط`)۔ 🔄"
+        },
+        "use_defaults": {
+          "description": "اس سروس کال میں متعین نہ ہونے والی ڈیفالٹ اقدار سیٹ کرتا ہے۔ اختیارات: \"موجودہ\" (ڈیفالٹ، موجودہ اقدار کو برقرار رکھتا ہے)، \"فیکٹری\" (دستاویزی ڈیفالٹ میں ری سیٹ) ، یا \"کنفیگریشن\" (سوئچ کنفگ ڈیفالٹس پر واپس آجاتا ہے)۔ ⚙️"
+        },
+        "separate_turn_on_commands": {
+          "description": "رنگ اور چمک کے لئے علیحدہ 'light.turn_on' کا استعمال کریں ، جو کچھ روشنی کی اقسام کے لئے ضروری ہے۔ 🔀"
+        },
+        "prefer_rgb_color": {
+          "description": "جب ممکن ہو تو روشنی کے رنگ کے درجہ حرارت پر آر جی بی رنگ ایڈجسٹمنٹ کو ترجیح دیں یا نہیں۔ 🌈"
+        },
+        "max_color_temp": {
+          "description": "کیلون میں سرد ترین رنگ کا درجہ حرارت. ❄️"
+        },
+        "sunset_offset": {
+          "description": "غروب آفتاب کے وقت کو سیکنڈوں میں مثبت یا منفی آفسیٹ کے ساتھ ایڈجسٹ کریں۔ ⏰"
+        },
+        "send_split_delay": {
+          "description": "ان روشنیوں کے لئے 'separate_turn_on_commands' کے درمیان تاخیر (ایم ایس) جو بیک وقت چمک اور رنگ کی ترتیب کی حمایت نہیں کرتی ہیں۔ ⏲️"
+        },
+        "sunset_time": {
+          "description": "غروب آفتاب کے لئے ایک مقررہ وقت (ایچ ایچ: ایم ایم: ایس ایس) مقرر کریں۔ 🌇"
+        },
+        "transition": {
+          "description": "جب روشنیاں تبدیل ہوتی ہیں تو منتقلی کا دورانیہ ، سیکنڈوں میں۔ 🕑"
+        },
+        "min_sunset_time": {
+          "description": "سب سے پہلے مجازی غروب آفتاب کا وقت (ایچ ایچ: ایم ایم: ایس ایس) مقرر کریں ، جس سے بعد میں غروب آفتاب کی اجازت ملتی ہے۔ 🌇"
+        }
+      },
+      "description": "سوئچ میں آپ جو بھی ترتیبات چاہتے ہیں اسے تبدیل کریں۔ یہاں تمام اختیارات وہی ہیں جو کنفگ بہاؤ میں ہیں۔"
+    },
+    "apply": {
+      "fields": {
+        "entity_id": {
+          "description": "لاگو کرنے کے لئے ترتیبات کے ساتھ سوئچ کا 'entity_id'۔ 📝"
+        },
+        "adapt_brightness": {
+          "description": "کیا روشنی کی چمک کو ڈھالنا ہے۔ 🌞"
+        },
+        "turn_on_lights": {
+          "description": "کیا ان لائٹس کو آن کرنا ہے جو فی الحال بند ہیں۔ 🔆"
+        },
+        "adapt_color": {
+          "description": "کیا معاون لائٹس پر رنگ کو ڈھالنا ہے۔ 🌈"
+        },
+        "prefer_rgb_color": {
+          "description": "جب ممکن ہو تو روشنی کے رنگ کے درجہ حرارت پر آر جی بی رنگ ایڈجسٹمنٹ کو ترجیح دیں یا نہیں۔ 🌈"
+        },
+        "lights": {
+          "description": "ترتیبات کو لاگو کرنے کے لیے روشنی (یا لائٹس کی فہرست)۔ 💡"
+        },
+        "transition": {
+          "description": "جب روشنیاں تبدیل ہوتی ہیں تو منتقلی کا دورانیہ ، سیکنڈوں میں۔ 🕑"
+        }
+      },
+      "description": "روشنیوں پر موجودہ مطابقت پذیر روشنی کی ترتیبات کا اطلاق ہوتا ہے۔"
+    },
+    "set_manual_control": {
+      "fields": {
+        "manual_control": {
+          "description": "کیا روشنی کو \"manual_control\" کی فہرست سے شامل کرنا ہے (\"سچ\") یا (\"غلط\") ہٹانا ہے۔ 🔒"
+        },
+        "entity_id": {
+          "description": "سوئچ کا 'entity_id' جس میں روشنی کو 'دستی طور پر کنٹرول' کے طور پر نشان زد کرنا ہے۔ 📝"
+        },
+        "lights": {
+          "description": "لائٹس کے entity_id ، اگر واضح نہیں ہیں تو ، سوئچ میں موجود تمام لائٹس منتخب کی جاتی ہیں۔ 💡"
+        }
+      },
+      "description": "نشان لگائیں کہ آیا روشنی کو 'دستی طور پر کنٹرول' کیا جاتا ہے۔"
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "data_description": {
+          "interval": "روشنیوں کو سیکنڈوں میں ڈھالنے کی فریکوئنسی۔ 🔄",
+          "transition": "جب روشنیاں تبدیل ہوتی ہیں تو منتقلی کا دورانیہ ، سیکنڈوں میں۔ 🕑",
+          "sleep_brightness": "نیند کے موڈ میں روشنی کی چمک کا فیصد. 😴",
+          "sleep_color_temp": "کیلون میں نیند کے موڈ میں رنگ کا درجہ حرارت (جب 'sleep_rgb_or_color_temp' 'color_temp' ہوتا ہے) میں استعمال ہوتا ہے۔ 😴"
+        },
+        "data": {
+          "lights": "لائٹس: کنٹرول کی جانے والی روشنی کے entity_ids کی فہرست (خالی ہوسکتی ہے). 🌟",
+          "min_brightness": "min_brightness: کم سے کم چمک کا فیصد. 💡",
+          "max_brightness": "max_brightness: زیادہ سے زیادہ چمک کا فیصد. 💡",
+          "min_color_temp": "min_color_temp: کیلون میں گرم ترین رنگ کا درجہ حرارت. 🔥",
+          "max_color_temp": "max_color_temp: کیلون میں سرد ترین رنگ کا درجہ حرارت۔ ❄️"
+        },
+        "title": "مطابقت پذیر روشنی کے اختیارات",
+        "description": "ایک مطابقت پذیر لائٹنگ جزو تشکیل دیں۔ آپشن کے نام YAML کی ترتیبات کے ساتھ مطابقت رکھتے ہیں۔ اگر آپ نے YAML میں اس اندراج کی وضاحت کی ہے تو ، یہاں کوئی آپشن ظاہر نہیں ہوگا۔ انٹرایکٹو گراف کے لئے جو پیرامیٹر کے اثرات کو ظاہر کرتے ہیں ، ملاحظہ کریں [اس ویب ایپ]({webapp_url})۔ مزید تفصیلات کے لئے ، [سرکاری دستاویزات]({docs_url}) ملاحظہ کریں۔",
+        "sections": {
+          "advanced": {
+            "data": {
+              "prefer_rgb_color": "prefer_rgb_color: جب ممکن ہو تو روشنی کے رنگ کے درجہ حرارت پر آر جی بی رنگ ایڈجسٹمنٹ کو ترجیح دیں یا نہیں۔ 🌈",
+              "transition_until_sleep": "transition_until_sleep: جب فعال کیا جاتا ہے تو ، ایڈاپٹو لائٹنگ نیند کی ترتیبات کو کم سے کم تصور کرے گی ، غروب آفتاب کے بعد ان اقدار میں منتقل ہوگی۔ 🌙",
+              "take_over_control": "take_over_control: اگر کوئی دوسرا ذریعہ 'light.turn_on' کا نام دیتا ہے تو ایڈاپٹو لائٹنگ کو غیر فعال کریں جب لائٹس آن ہیں اور اسے اپنایا جارہا ہے۔ نوٹ کریں کہ یہ ہر 'وقفے' کو 'homeassistant.update_entity' کہتا ہے! 🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: غیر light.turn_on ریاست کی تبدیلیوں کے لئے موافقت کا پتہ لگاتا ہے اور روکتا ہے۔ 'take_over_control' کو فعال کرنے کی ضرورت ہے۔ 🕵️ احتیاط: ⚠️ کچھ لائٹس غلط طور پر 'آن' حالت کی نشاندہی کر سکتی ہیں ، جس کے نتیجے میں لائٹس غیر متوقع طور پر آن ہوسکتی ہیں۔ اگر آپ کو اس طرح کے مسائل کا سامنا کرنا پڑتا ہے تو اس خصوصیت کو غیر فعال کریں۔",
+              "only_once": "only_once: لائٹس کو صرف اس وقت ڈھالیں جب وہ آن ہوں ('سچ') یا انہیں اپناتے رہیں ('جھوٹ')۔ 🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on: شروع میں لائٹس آن کرتے وقت۔ اگر 'true' پر سیٹ کیا جاتا ہے، AL صرف اس صورت میں موافق ہوتا ہے جب رنگ یا چمک کی وضاحت کیے بغیر 'light.turn_on' کو مدعو کیا جاتا ہے۔ ❌🌈 یہ مثال کے طور پر، کسی منظر کو چالو کرتے وقت موافقت کو روکتا ہے۔ اگر 'غلط'، AL ابتدائی `سروس_ڈیٹا` میں رنگ یا چمک کی موجودگی سے قطع نظر موافقت کرتا ہے۔ 'ٹیک_اوور_کنٹرول' کو فعال کرنے کی ضرورت ہے۔ 🕵️ ",
+              "separate_turn_on_commands": "separate_turn_on_commands: رنگ اور چمک کے لئے الگ الگ 'light.turn_on' کا استعمال کریں، جو کچھ روشنی کی اقسام کے لئے ضروری ہے. 🔀",
+              "skip_redundant_commands": "skip_redundant_commands: موافقت کے احکامات بھیجنے سے گریز کریں جن کی ہدف کی حالت پہلے سے ہی روشنی کی معلوم حالت کے برابر ہے۔ نیٹ ورک ٹریفک کو کم سے کم کرتا ہے اور کچھ حالات میں موافقت کی ذمہ داری کو بہتر بناتا ہے۔ 📉اگر جسمانی روشنی کی حالت یں ایچ اے کی ریکارڈ شدہ حالت کے ساتھ مطابقت سے باہر ہوجاتی ہیں تو غیر فعال کریں۔",
+              "intercept": "انٹرسیپٹ: 'light.turn_on' کالز کو فوری طور پر رنگ اور چمک کے مطابقت پذیری کو قابل بنانے کے لئے روکیں اور اپنائیں۔ 🏎️ ایسی روشنیوں کو غیر فعال کریں جو رنگ اور چمک کے ساتھ 'light.turn_on' کی حمایت نہیں کرتی ہیں۔",
+              "multi_light_intercept": "multi_light_intercept: 'light.turn_on' کالز کو روکیں اور ان کے مطابق ڈھالیں جو متعدد روشنیوں کو نشانہ بناتی ہیں۔ ➗⚠️ اس کے نتیجے میں ایک ہی 'light.turn_on' کال کو متعدد کالز میں تقسیم کیا جاسکتا ہے ، مثال کے طور پر ، جب لائٹس مختلف سوئچوں میں ہوتی ہیں۔ 'انٹرسیپٹ' کو فعال کرنے کی ضرورت ہے۔",
+              "include_config_in_attributes": "include_config_in_attributes: 'سچ' پر سیٹ ہونے پر ہوم اسسٹنٹ میں سوئچ پر خصوصیات کے طور پر تمام اختیارات دکھائیں۔ 📝"
+            },
+            "data_description": {
+              "initial_transition": "پہلی منتقلی کا دورانیہ جب لائٹس سیکنڈوں میں 'بند' سے 'آن' میں تبدیل ہوجاتی ہیں۔ ⏲️",
+              "sleep_rgb_or_color_temp": "نیند کے موڈ میں \"rgb_color\" یا \"color_temp\" کا استعمال کریں۔ 🌙",
+              "sleep_rgb_color": "نیند کے موڈ میں آر جی بی رنگ (جب 'sleep_rgb_or_color_temp' \"rgb_color\" ہوتا ہے تو استعمال کیا جاتا ہے). 🌈",
+              "sleep_transition": "Duration of transition when \"sleep mode\" is toggled in seconds. 😴",
+              "sunrise_time": "طلوع آفتاب کے لئے ایک مقررہ وقت (ایچ ایچ: ایم ایم: ایس ایس) مقرر کریں۔ 🌅",
+              "min_sunrise_time": "ابتدائی مجازی طلوع آفتاب کا وقت (ایچ ایچ: ایم ایم: ایس ایس) مقرر کریں ، جس سے بعد میں طلوع آفتاب کی اجازت ملتی ہے۔ 🌅",
+              "max_sunrise_time": "تازہ ترین مجازی طلوع آفتاب کا وقت (ایچ ایچ: ایم ایم: ایس ایس) سیٹ کریں ، جس سے قبل طلوع آفتاب کی اجازت ملتی ہے۔ 🌅",
+              "sunrise_offset": "طلوع آفتاب کے وقت کو سیکنڈوں میں مثبت یا منفی آفسیٹ کے ساتھ ایڈجسٹ کریں۔ ⏰",
+              "sunset_time": "غروب آفتاب کے لئے ایک مقررہ وقت (ایچ ایچ: ایم ایم: ایس ایس) مقرر کریں۔ 🌇",
+              "min_sunset_time": "سب سے پہلے مجازی غروب آفتاب کا وقت (ایچ ایچ: ایم ایم: ایس ایس) مقرر کریں ، جس سے بعد میں غروب آفتاب کی اجازت ملتی ہے۔ 🌇",
+              "max_sunset_time": "تازہ ترین مجازی غروب آفتاب کا وقت (ایچ ایچ: ایم ایم: ایس ایس) سیٹ کریں ، جس سے قبل غروب آفتاب کی اجازت ملتی ہے۔ 🌇",
+              "sunset_offset": "غروب آفتاب کے وقت کو سیکنڈوں میں مثبت یا منفی آفسیٹ کے ساتھ ایڈجسٹ کریں۔ ⏰",
+              "brightness_mode": "استعمال کرنے کے لئے چمک کا موڈ۔ ممکنہ قدریں 'ڈیفالٹ'، 'لکیری' اور 'تن' ہیں ('brightness_mode_time_dark' اور 'brightness_mode_time_light' کا استعمال کرتی ہیں)۔ 📈",
+              "brightness_mode_time_dark": "(اگر 'brightness_mode='ڈیفالٹ') سورج طلوع ہونے سے پہلے / غروب آفتاب سے پہلے / بعد میں چمک کو بڑھانے کے لئے سیکنڈ میں دورانیہ۔ 📈📉",
+              "brightness_mode_time_light": "(اگر 'brightness_mode='ڈیفالٹ') سورج طلوع ہونے کے بعد / اس سے پہلے / غروب آفتاب سے پہلے چمک کو بڑھانے کے لئے سیکنڈوں میں دورانیہ۔ 📈📉.",
+              "autoreset_control_seconds": "کئی سیکنڈ کے بعد دستی کنٹرول کو خود بخود ری سیٹ کریں۔ غیر فعال کرنے کے لئے 0 پر سیٹ کریں۔ ⏲️",
+              "send_split_delay": "ان روشنیوں کے لئے 'separate_turn_on_commands' کے درمیان تاخیر (ایم ایس) جو بیک وقت چمک اور رنگ کی ترتیب کی حمایت نہیں کرتی ہیں۔ ⏲️",
+              "adapt_delay": "لائٹ آن ہونے اور ایڈاپٹو لائٹنگ کے درمیان انتظار کا وقت (سیکنڈ) تبدیلیاں لاگو کرتا ہے۔ جھلکنے سے بچنے میں مدد مل سکتی ہے۔ ⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "غیر قانونی آپشن",
+      "entity_missing": "ہوم اسسٹنٹ سے ایک یا ایک سے زیادہ منتخب لائٹ ادارے غائب ہیں"
+    }
+  },
+  "title": "مطابقت پذیر روشنی",
+  "config": {
+    "step": {
+      "user": {
+        "description": "ہر مثال میں متعدد روشنیاں ہوسکتی ہیں!",
+        "title": "ایڈاپٹو لائٹنگ مثال کے لئے ایک نام منتخب کریں"
+      }
+    },
+    "abort": {
+      "already_configured": "یہ آلہ پہلے ہی تشکیل دیا گیا ہے"
+    }
+  }
+}

custom_components/adaptive_lighting/translations/zh-Hans.json

@@ -0,0 +1,277 @@
+{
+  "title": "自适应照明",
+  "config": {
+    "step": {
+      "user": {
+        "title": "为自适应照明实例选择一个名称",
+        "description": "每个实例可以包含多个灯光！",
+        "data": {
+          "name": "名称"
+        }
+      }
+    },
+    "abort": {
+      "already_configured": "此设备已配置"
+    }
+  },
+  "options": {
+    "step": {
+      "init": {
+        "title": "自适应照明选项",
+        "description": "配置自适应照明组件。选项名称与YAML设置对齐。如果在YAML中定义了此条目，则此处不会显示任何选项。有关演示参数影响的交互式图表，请访问[此Web应用程序]({webapp_url})。有关更多详细信息，请参阅[官方文档]({docs_url})。",
+        "data": {
+          "lights": "lights：要控制的灯光实体ID列表（可以为空）。🌟",
+          "interval": "频率(interval)",
+          "transition": "过渡(transition)",
+          "min_brightness": "min_brightness：最小亮度百分比。💡",
+          "max_brightness": "max_brightness：最大亮度百分比。💡",
+          "min_color_temp": "min_color_temp：最暖的色温，以开尔文为单位。🔥",
+          "max_color_temp": "max_color_temp：最冷的色温，以开尔文为单位。❄️",
+          "sleep_brightness": "睡眠模式亮度(sleep_brightness)",
+          "sleep_color_temp": "睡眠模式中的色温(sleep_color_temp)"
+        },
+        "data_description": {
+          "interval": "调整灯光的频率，以秒为单位。🔄",
+          "transition": "灯光变化时的过渡持续时间，以秒为单位。🕑",
+          "sleep_brightness": "睡眠模式中的亮度百分比。😴",
+          "sleep_color_temp": "睡眠模式中的色温（当`sleep_rgb_or_color_temp`为`color_temp`时使用），以开尔文为单位。😴"
+        },
+        "sections": {
+          "advanced": {
+            "data": {
+              "initial_transition": "初始过渡(initial_transition)",
+              "prefer_rgb_color": "prefer_rgb_color：在可能时是否优先使用RGB颜色调整而不是灯光色温。🌈",
+              "sleep_rgb_or_color_temp": "睡眠模式RGB或色温(sleep_rgb_or_color_temp)",
+              "sleep_rgb_color": "睡眠模式中的RGB颜色(sleep_rgb_color)",
+              "sleep_transition": "睡眠模式过渡时间(sleep_transition)",
+              "transition_until_sleep": "transition_until_sleep：启用时，自适应照明将将睡眠设置视为最小值，在日落后过渡到这些值。🌙",
+              "sunrise_time": "日出时间(sunrise_time)",
+              "min_sunrise_time": "最早日出时间(min_sunrise_time)",
+              "max_sunrise_time": "最晚日出时间(max_sunrise_time)",
+              "sunrise_offset": "日出时间偏移(sunrise_offset)",
+              "sunset_time": "日落时间(sunset_time)",
+              "min_sunset_time": "最早日落时间(min_sunset_time)",
+              "max_sunset_time": "最晚日落时间(max_sunset_time)",
+              "sunset_offset": "日落时间偏移(sunset_offset)",
+              "brightness_mode": "亮度模式(brightness_mode)",
+              "brightness_mode_time_dark": "变暗时间(brightness_mode_time_dark)",
+              "brightness_mode_time_light": "变亮时间(brightness_mode_time_light)",
+              "take_over_control": "take_over_control: 如果在灯光处于开启并处于适应照明的状态时，另一个来源调用`light.turn_on`，则禁用自适应照明。请注意，这会在每个`interval`调用`homeassistant.update_entity`！🔒",
+              "detect_non_ha_changes": "detect_non_ha_changes: 检测非`light.turn_on`的状态更改，并停止自适应照明。需要启用`take_over_control`。🕵️ 注意：⚠️ 一些灯光可能错误地显示为“开启”状态，这可能会导致灯光意外打开。如果遇到此类问题，请禁用此功能。",
+              "autoreset_control_seconds": "自动重置时间(autoreset_control_seconds)",
+              "only_once": "only_once：仅在打开时调整灯光（`true`）或始终调整灯光（`false`）。🔄",
+              "adapt_only_on_bare_turn_on": "adapt_only_on_bare_turn_on：当首次打开灯光时。如果设置为`true`，仅在没有指定颜色或亮度的情况下，AL才进行适应。❌🌈 例如，这可以防止在激活场景时进行适应。如果为`false`，则不考虑初始`service_data`中是否存在颜色或亮度，AL都会适应。需要启用`take_over_control`。🕵️",
+              "separate_turn_on_commands": "separate_turn_on_commands：为某些灯光类型需要使用单独的`light.turn_on`调用来设置颜色和亮度。🔀",
+              "send_split_delay": "指令发送间隔延迟(send_split_delay)",
+              "adapt_delay": "自适应照明延迟(adapt_delay)",
+              "skip_redundant_commands": "skip_redundant_commands：跳过目标状态已经等于灯光已知状态的自适应命令。在某些情况下，可以减少网络流量并提高适应响应性。📉如果物理灯光状态与HA的记录状态不同步，请禁用此功能。",
+              "intercept": "intercept：拦截并适应`light.turn_on`调用，以实现即时的颜色和亮度适应。🏎️ 对于不支持使用颜色和亮度进行`light.turn_on`的灯光，禁用此功能。",
+              "multi_light_intercept": "multi_light_intercept：拦截和适应针对多个灯光的`light.turn_on`调用。➗⚠️ 这可能会将单个`light.turn_on`调用拆分为多个调用，例如当灯光位于不同的开关中时。需要启用`intercept`。",
+              "include_config_in_attributes": "include_config_in_attributes：在Home Assistant中将所有选项显示为开关的属性时，设置为`true`。📝"
+            },
+            "data_description": {
+              "initial_transition": "灯光从“关闭”到“开启”时的第一个过渡持续时间，以秒为单位。⏲️",
+              "sleep_rgb_or_color_temp": "在睡眠模式中使用“rgb_color”或“color_temp”。🌙",
+              "sleep_rgb_color": "睡眠模式中的RGB颜色（当`sleep_rgb_or_color_temp`为“rgb_color”时使用）。🌈",
+              "sleep_transition": "切换“睡眠模式”时的过渡持续时间，以秒为单位。😴",
+              "sunrise_time": "设置固定的日出时间（HH:MM:SS）。🌅",
+              "min_sunrise_time": "设置最早的虚拟日出时间（HH:MM:SS），允许更晚的日出。🌅",
+              "max_sunrise_time": "设置最晚的虚拟日出时间（HH:MM:SS），允许更早的日出。🌅",
+              "sunrise_offset": "以秒为单位的正负偏移调整日出时间。⏰",
+              "sunset_time": "设置固定的日落时间（HH:MM:SS）。🌇",
+              "min_sunset_time": "设置最早的虚拟日落时间（HH:MM:SS），允许更晚的日落。🌇",
+              "max_sunset_time": "设置最晚的虚拟日落时间（HH:MM:SS），允许更早的日落。🌇",
+              "sunset_offset": "以秒为单位的正负偏移调整日落时间。⏰",
+              "brightness_mode": "要使用的亮度模式。可能的值为`default`、`linear`和`tanh`（使用`brightness_mode_time_dark`和`brightness_mode_time_light`）。📈",
+              "brightness_mode_time_dark": "（如果`brightness_mode='default'`将被忽略）日出/日落之前/之后亮度逐渐增加/减少的持续时间，以秒为单位。📈📉",
+              "brightness_mode_time_light": "（如果`brightness_mode='default'`将被忽略）日出/日落之后/之前亮度逐渐增加/减少的持续时间，以秒为单位。📈📉。",
+              "autoreset_control_seconds": "在若干秒后自动重置手动控制。设置为0以禁用。⏲️",
+              "send_split_delay": "对于不支持同时设置亮度和颜色的灯光，`separate_turn_on_commands`之间的延迟时间（毫秒）。⏲️",
+              "adapt_delay": "灯光打开和自适应照明应用更改之间的等待时间（秒）。可能有助于避免闪烁。⏲️"
+            }
+          }
+        }
+      }
+    },
+    "error": {
+      "option_error": "无效的选项",
+      "entity_missing": "一个或多个选择的灯光实体在Home Assistant中不存在"
+    }
+  },
+  "services": {
+    "apply": {
+      "name": "应用",
+      "description": "将当前自适应照明设置应用于灯光。",
+      "fields": {
+        "entity_id": {
+          "description": "具有要应用设置的开关的`entity_id`。📝",
+          "name": "entity_id"
+        },
+        "lights": {
+          "description": "要应用设置的灯光（或灯光列表）。💡",
+          "name": "lights"
+        },
+        "transition": {
+          "description": "灯光变化时的过渡持续时间，以秒为单位。🕑",
+          "name": "transition"
+        },
+        "adapt_brightness": {
+          "description": "是否调整灯光的亮度。🌞",
+          "name": "adapt_brightness"
+        },
+        "adapt_color": {
+          "description": "是否在支持的灯光上调整颜色。🌈",
+          "name": "adapt_color"
+        },
+        "prefer_rgb_color": {
+          "description": "在可能时是否优先使用RGB颜色调整而不是灯光色温。🌈",
+          "name": "prefer_rgb_color"
+        },
+        "turn_on_lights": {
+          "description": "是否打开当前关闭的灯光。🔆",
+          "name": "turn_on_lights"
+        }
+      }
+    },
+    "set_manual_control": {
+      "name": "设置手动控制",
+      "description": "标记灯光是否为'手动控制'。",
+      "fields": {
+        "entity_id": {
+          "description": "要在其中（取消）标记灯光为“手动控制”的开关的`entity_id`。📝",
+          "name": "entity_id"
+        },
+        "lights": {
+          "description": "如果未指定，则为灯光的entity_id（s），如果未指定，则选择开关中的所有灯光。💡",
+          "name": "lights"
+        },
+        "manual_control": {
+          "description": "是否将灯光从“手动控制”列表中添加（“true”）或删除（“false”）。🔒",
+          "name": "manual_control"
+        }
+      }
+    },
+    "change_switch_settings": {
+      "name": "更改开关设置",
+      "description": "在开关中更改您想要的任何设置。此处的所有选项与配置流中的选项相同。",
+      "fields": {
+        "entity_id": {
+          "description": "开关的实体ID。📝",
+          "name": "entity_id"
+        },
+        "use_defaults": {
+          "description": "设置未在此服务调用中指定的默认值。选项：“current”（默认值，保留当前值）、“factory”（重置为文档默认值）或“configuration”（恢复到开关配置默认值）。⚙️",
+          "name": "use_defaults"
+        },
+        "include_config_in_attributes": {
+          "description": "在Home Assistant中将所有选项显示为开关的属性时，设置为`true`。📝",
+          "name": "include_config_in_attributes"
+        },
+        "turn_on_lights": {
+          "description": "是否打开当前关闭的灯光。🔆",
+          "name": "turn_on_lights"
+        },
+        "initial_transition": {
+          "description": "灯光从“关闭”到“开启”时的第一个过渡持续时间，以秒为单位。⏲️",
+          "name": "initial_transition"
+        },
+        "sleep_transition": {
+          "description": "切换“睡眠模式”时的过渡持续时间，以秒为单位。😴",
+          "name": "sleep_transition"
+        },
+        "max_brightness": {
+          "description": "最大亮度百分比。💡",
+          "name": "max_brightness"
+        },
+        "max_color_temp": {
+          "description": "最低的色温，以开尔文为单位。❄️",
+          "name": "max_color_temp"
+        },
+        "min_brightness": {
+          "description": "最小亮度百分比。💡",
+          "name": "min_brightness"
+        },
+        "min_color_temp": {
+          "description": "最高的色温，以开尔文为单位。🔥",
+          "name": "min_color_temp"
+        },
+        "only_once": {
+          "description": "仅在打开时调整灯光（`true`）或始终调整灯光（`false`）。🔄",
+          "name": "only_once"
+        },
+        "prefer_rgb_color": {
+          "description": "在可能时是否优先使用RGB颜色调整而不是灯光色温。🌈",
+          "name": "prefer_rgb_color"
+        },
+        "separate_turn_on_commands": {
+          "description": "为某些灯光类型需要使用单独的`light.turn_on`调用来设置颜色和亮度。🔀",
+          "name": "separate_turn_on_commands"
+        },
+        "send_split_delay": {
+          "description": "对于不支持同时设置亮度和颜色的灯光，`separate_turn_on_commands`之间的延迟时间（毫秒）。⏲️",
+          "name": "send_split_delay"
+        },
+        "sleep_brightness": {
+          "description": "睡眠模式中的亮度百分比。😴",
+          "name": "sleep_brightness"
+        },
+        "sleep_rgb_or_color_temp": {
+          "description": "在睡眠模式中使用“rgb_color”或“color_temp”。🌙",
+          "name": "sleep_rgb_or_color_temp"
+        },
+        "sleep_rgb_color": {
+          "description": "睡眠模式中的RGB颜色（当`sleep_rgb_or_color_temp`为“rgb_color”时使用）。🌈",
+          "name": "sleep_rgb_color"
+        },
+        "sleep_color_temp": {
+          "description": "睡眠模式中的色温（当`sleep_rgb_or_color_temp`为`color_temp`时使用），以开尔文为单位。😴",
+          "name": "sleep_color_temp"
+        },
+        "sunrise_offset": {
+          "description": "以秒为单位的正负偏移调整日出时间。⏰",
+          "name": "sunrise_offset"
+        },
+        "sunrise_time": {
+          "description": "设置固定的日出时间（HH:MM:SS）。🌅",
+          "name": "sunrise_time"
+        },
+        "sunset_offset": {
+          "description": "以正负偏移秒调整日落时间。⏰",
+          "name": "sunset_offset"
+        },
+        "sunset_time": {
+          "description": "设置固定的日落时间（HH:MM:SS）。🌇",
+          "name": "sunset_time"
+        },
+        "max_sunrise_time": {
+          "description": "设置最晚的虚拟日出时间（HH:MM:SS），允许更早的日出。🌅",
+          "name": "max_sunrise_time"
+        },
+        "min_sunset_time": {
+          "description": "设置最早的虚拟日落时间（HH:MM:SS），允许更晚的日落。🌇",
+          "name": "min_sunset_time"
+        },
+        "take_over_control": {
+          "description": "如果其他来源在灯光处于打开和正在适应状态时调用`light.turn_on`，则禁用自适应照明。请注意，这会每个`interval`调用`homeassistant.update_entity`！🔒",
+          "name": "take_over_control"
+        },
+        "detect_non_ha_changes": {
+          "description": "检测并停止对非`light.turn_on`状态更改的适应。需要启用`take_over_control`。🕵️ 注意：⚠️ 一些灯光可能错误地显示为“开启”状态，这可能导致灯光意外打开。如果遇到此类问题，请禁用此功能。",
+          "name": "detect_non_ha_changes"
+        },
+        "transition": {
+          "description": "灯光变化时的过渡持续时间，以秒为单位。🕑",
+          "name": "transition"
+        },
+        "adapt_delay": {
+          "description": "灯光打开和自适应照明应用更改之间的等待时间（秒）。可能有助于避免闪烁。⏲️",
+          "name": "adapt_delay"
+        },
+        "autoreset_control_seconds": {
+          "description": "在若干秒后自动重置手动控制。设置为0以禁用。⏲️",
+          "name": "autoreset_control_seconds"
+        }
+      }
+    }
+  }
+}

custom_components/adaptive_lighting/translations/zh_Hant.json

@@ -0,0 +1 @@
+{}

docs/CNAME

@@ -0,0 +1 @@
+adaptive-lighting.nijho.lt

docs/advanced/brightness-modes.md

@@ -0,0 +1,122 @@
+---
+icon: lucide/trending-up
+---
+
+# Brightness Modes
+
+Enhance your control over brightness transitions during sunrise and sunset with the `brightness_mode` option.
+
+## Available Modes
+
+Adaptive Lighting supports three brightness modes:
+
+| Mode | Description |
+|------|-------------|
+| `default` | Standard behavior based on sun position |
+| `linear` | Linear ramp between min/max brightness |
+| `tanh` | Smooth S-curve using hyperbolic tangent |
+
+## Detailed Explanation
+
+<!-- CODE:START -->
+<!-- print(include_section("../../README.md", "brightness-modes", strip_heading=True)) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+<details markdown="1">
+<summary>Enhance your control over brightness transitions during sunrise and sunset with <code>brightness_mode</code> (click here to learn more 🧠).</summary>
+
+With Adaptive Lighting, you can set a `brightness_mode` to specify how the brightness changes during sunrise and sunset. The `brightness_mode` can be set to `"default"` ([as illustrated in other graphs above](#high_brightness-brightness)), `"linear"`, or `"tanh"`. If you choose to deviate from the `"default"` mode, you can adjust `brightness_mode_time_dark` and `brightness_mode_time_light` to further customize the lighting transitions.
+
+When `brightness_mode` is set to `"linear"`:
+
+- During **_sunset_**, the brightness begins to gradually decrease from `max_brightness` starting at `time=sunset_time - brightness_mode_time_light`, until it reaches `min_brightness` at `time=sunset_time + brightness_mode_time_dark`.
+- During **_sunrise_**, the brightness begins to gradually increase from `min_brightness` starting at `time=sunrise_time - brightness_mode_time_dark`, until it reaches `max_brightness` at `time=sunrise_time + brightness_mode_time_light`.
+
+When `brightness_mode` is set to `"tanh"`, it uses the smooth transition of a [hyperbolic tangent function](https://mathworld.wolfram.com/HyperbolicTangent.html):
+
+- During **_sunset_**, the brightness starts to decrease from 95% of `max_brightness` starting at `time=sunset_time - brightness_mode_time_light`, until it reaches 5% of `min_brightness` at `time=sunset_time + brightness_mode_time_dark`.
+- During **_sunrise_**, the brightness starts to increase from 5% of `min_brightness` starting at `time=sunrise_time - brightness_mode_time_dark`, until it reaches 95% of `max_brightness` at `time=sunrise_time + brightness_mode_time_light`.
+</details>
+
+Notice the values of `brightness_mode_time_light` and `brightness_mode_time_dark` in the text box.
+![image](https://github.com/basnijholt/adaptive-lighting/assets/6897215/15143580-13cd-4ab2-a603-89f2b7830afd)
+![image](https://github.com/basnijholt/adaptive-lighting/assets/6897215/f61fdac9-6d47-48c9-84ed-cbb451d5de5d)
+![image](https://github.com/basnijholt/adaptive-lighting/assets/6897215/e5fc5d27-3c37-4e3d-93d1-6e7cf4b48e7c)
+![image](https://github.com/basnijholt/adaptive-lighting/assets/6897215/3dcbdc42-63c4-49df-8651-d2fae53dd08d)
+
+> Check out the interactive webapp on https://basnijholt.github.io/adaptive-lighting/ to play with the parameters and see how the brightness changes!
+
+<!-- OUTPUT:END -->
+
+## Configuration Parameters
+
+When using `linear` or `tanh` modes, you can fine-tune the transition with these parameters:
+
+| Parameter | Default | Description |
+|-----------|---------|-------------|
+| `brightness_mode_time_dark` | 900 (15 min) | Duration to ramp brightness before/after sunrise/sunset |
+| `brightness_mode_time_light` | 3600 (1 hour) | Duration to ramp brightness after/before sunrise/sunset |
+
+## Example Configurations
+
+### Quick Transition (Linear)
+
+```yaml
+adaptive_lighting:
+  - name: "Quick transitions"
+    lights:
+      - light.living_room
+    brightness_mode: linear
+    brightness_mode_time_dark: 600    # 10 minutes
+    brightness_mode_time_light: 1800  # 30 minutes
+```
+
+### Smooth Transition (Tanh)
+
+```yaml
+adaptive_lighting:
+  - name: "Smooth transitions"
+    lights:
+      - light.bedroom
+    brightness_mode: tanh
+    brightness_mode_time_dark: 1200   # 20 minutes
+    brightness_mode_time_light: 3600  # 1 hour
+```
+
+## Graphs
+
+These graphs show how brightness changes throughout the day based on calculated values:
+
+<!-- CODE:START -->
+<!-- print(include_section("../../README.md", "graphs", strip_heading=True)) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+These graphs were generated using the values calculated by the Adaptive Lighting sensor/switch(es).
+
+### :sunny: Sun Position
+![cl_percent|690x131](https://community-home-assistant-assets.s3.dualstack.us-west-2.amazonaws.com/original/3X/6/5/657ff98beb65a94598edeb4bdfd939095db1a22c.PNG)
+
+### :thermometer: Color Temperature
+![cl_color_temp|690x129](https://community-home-assistant-assets.s3.dualstack.us-west-2.amazonaws.com/original/3X/5/9/59e84263cbecd8e428cb08777a0413672c48dfcd.PNG)
+
+### :high_brightness: Brightness
+![cl_brightness|690x130](https://community-home-assistant-assets.s3.dualstack.us-west-2.amazonaws.com/original/3X/5/8/58ebd994b62a8b1abfb3497a5288d923ff4e2330.PNG)
+
+### While using `transition_until_sleep: true`
+![image](https://user-images.githubusercontent.com/2219836/228949675-f9699624-8abc-466c-bb04-250ce0f495b8.png)
+
+<!-- OUTPUT:END -->
+
+## Interactive Simulator
+
+The best way to understand brightness modes is to experiment with the interactive simulator:
+
+<div style="text-align: center; margin: 2rem 0;">
+  <a href="../simulator/" class="simulator-link">
+    Try the Simulator
+  </a>
+</div>
+
+Adjust the `brightness_mode`, `brightness_mode_time_dark`, and `brightness_mode_time_light` parameters to see how they affect the brightness curve in real-time.

docs/advanced/manual-control.md

@@ -0,0 +1,201 @@
+---
+icon: lucide/hand
+---
+
+# Manual Control
+
+Adaptive Lighting is designed to work seamlessly with manual adjustments, detecting when you or another source changes light settings and pausing adaptation accordingly.
+
+## How It Works
+
+<!-- CODE:START -->
+<!-- print(include_section("../../README.md", "manual-control", strip_heading=True)) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+Adaptive Lighting is designed to automatically detect when you or another source (e.g., automation) manually changes light settings 🕹️.
+When this occurs, the affected light is marked as "manually controlled," and Adaptive Lighting will not make further adjustments until the light is turned off and back on or reset using the `adaptive_lighting.set_manual_control` service call.
+This feature is available when `take_over_control` is enabled.
+
+Additionally, enabling `detect_non_ha_changes` allows Adaptive Lighting to detect all state changes, including those made outside of Home Assistant, by comparing the light's state to its previously used settings.
+The `adaptive_lighting.manual_control` event is fired when a light is marked as "manually controlled," allowing for integration with automations 🤖.
+
+With `expand_light_groups: false`, manual control belongs to the group. A direct member change cannot pause adaptation for only that member; use group-level manual control or enable expansion for individual tracking.
+Explicit member targets in Adaptive Lighting services stay individual targets and do not mark or command the whole group.
+Changing expansion at runtime discards tracking and pending adaptation for targets no longer used by any profile.
+
+The Adaptive Lighting switch exposes these read-only attributes for its lights:
+
+- `manual_control`: lights with any attribute marked as manually controlled.
+- `manual_control_brightness`: lights with brightness marked as manually controlled.
+- `manual_control_color`: lights with color marked as manually controlled.
+
+These lists report manual-control flags. Actual adaptation also depends on `take_over_control_mode` and the brightness/color adaptation switches. For example, under the default `pause_all` mode, manually changing only brightness leaves `manual_control_color` empty while pausing both brightness and color adaptation. Under `pause_changed`, color can continue adapting.
+
+The attributes are absent when the Adaptive Lighting switch is off. Use a fallback when checking them in templates:
+
+```jinja
+{{ 'light.bedroom' in (state_attr('switch.adaptive_lighting_bedroom', 'manual_control_brightness') or []) }}
+```
+
+> ⚠️ **_Caution: Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Disable `detect_non_ha_changes` if you encounter such issues._**
+
+<!-- OUTPUT:END -->
+
+## Configuration Options
+
+### take_over_control
+
+When enabled (default: `true`), Adaptive Lighting detects `light.turn_on` service calls that specify brightness or color values. If such a call is detected for a light that's already on, that light is marked as "manually controlled".
+
+```yaml
+adaptive_lighting:
+  - name: "With manual control detection"
+    lights:
+      - light.living_room
+    take_over_control: true  # default
+```
+
+### take_over_control_mode
+
+Controls how adaptation pauses when manual changes are detected:
+
+| Mode | Behavior |
+|------|----------|
+| `pause_all` | Pause both brightness and color adaptation (default) |
+| `pause_changed` | Only pause adaptation of the changed attribute |
+
+```yaml
+adaptive_lighting:
+  - name: "Selective pause"
+    lights:
+      - light.living_room
+    take_over_control: true
+    take_over_control_mode: pause_changed  # Only pause changed attributes
+```
+
+### detect_non_ha_changes
+
+When enabled, Adaptive Lighting detects state changes made outside of Home Assistant by comparing the light's current state to its previously applied settings.
+
+> [!WARNING]
+> **Use with caution.** Some lights may falsely report an "on" state, which could result in lights turning on unexpectedly. Disable this option if you encounter such issues.
+
+```yaml
+adaptive_lighting:
+  - name: "Detect external changes"
+    lights:
+      - light.living_room
+    take_over_control: true
+    detect_non_ha_changes: true
+```
+
+### autoreset_control_seconds
+
+Automatically resets the manual control flag after a specified number of seconds. Set to `0` to disable (default).
+
+```yaml
+adaptive_lighting:
+  - name: "Auto-reset after 2 hours"
+    lights:
+      - light.living_room
+    take_over_control: true
+    autoreset_control_seconds: 7200  # 2 hours
+```
+
+### adapt_only_on_bare_turn_on
+
+When enabled, Adaptive Lighting only adapts lights when `light.turn_on` is called without specifying brightness or color. This is useful when you want scenes to work without interference.
+
+```yaml
+adaptive_lighting:
+  - name: "Respect scenes"
+    lights:
+      - light.living_room
+    take_over_control: true
+    adapt_only_on_bare_turn_on: true
+```
+
+### manual_control_on_external_turn_on
+
+When enabled, a turn-on without a state-change context matching the latest recorded Home Assistant `light.turn_on` is treated as manual control. This pauses brightness and color adaptation until manual control resets, rather than skipping just the first adjustment. The usual off/on, explicit reset, and configured timeout rules apply. A later unmatched turn-on marks the light manually controlled again.
+
+Manual-control flags are shared by profiles controlling the same light. Use the same turn-on policy on those profiles; mixed policies can allow an earlier profile to adapt before another marks the light manually controlled.
+
+Enable this if you want turn-ons from physical controls or native scenes to preserve their brightness and color. To adapt unmatched turn-ons, leave this disabled and enable `detect_non_ha_changes`.
+
+Its advantage over simply disabling `detect_non_ha_changes` is that the two behaviors are decoupled: you can keep `detect_non_ha_changes: true` to catch manual dimming of lights that are *already on*, while leaving unmatched turn-ons untouched.
+
+Adaptive Lighting cannot identify every physical versus Home Assistant source. Some integrations replace or omit the service context when they publish device state. In that case, even a Home Assistant turn-on does not match and this option treats it as external.
+
+```yaml
+adaptive_lighting:
+  - name: "Respect physical switches and Lutron scenes"
+    lights:
+      - light.living_room
+    take_over_control: true
+    detect_non_ha_changes: true      # still catch manual changes to already-on lights
+    manual_control_on_external_turn_on: true   # leave unmatched off→on events unchanged
+```
+
+## Checking Manual Control Status
+
+You can see which lights are marked as manually controlled by checking the switch attributes:
+
+1. Go to **Developer Tools** → **States**
+2. Find your Adaptive Lighting switch (e.g., `switch.adaptive_lighting_living_room`)
+3. Look at the `manual_control` attribute - it lists all manually controlled lights
+
+## Resetting Manual Control
+
+### Via Service Call
+
+```yaml
+service: adaptive_lighting.set_manual_control
+data:
+  entity_id: switch.adaptive_lighting_living_room
+  lights:
+    - light.floor_lamp
+  manual_control: false  # Resume adaptation
+```
+
+### By Turning Light Off and On
+
+Simply turning a light off and then back on will reset its manual control status.
+
+### Via Automation
+
+See [Automation Examples](../automation-examples.md) for automation recipes that automatically reset manual control.
+
+## Events
+
+When a light is marked as manually controlled, Adaptive Lighting fires an event:
+
+**Event type:** `adaptive_lighting.manual_control`
+
+**Event data:**
+```yaml
+entity_id: light.living_room
+switch: switch.adaptive_lighting_living_room
+```
+
+You can use this event to trigger automations:
+
+```yaml
+automation:
+  - alias: "Notify on manual control"
+    trigger:
+      platform: event
+      event_type: adaptive_lighting.manual_control
+    action:
+      - service: notify.mobile_app
+        data:
+          message: "{{ trigger.event.data.entity_id }} was manually adjusted"
+```
+
+## Best Practices
+
+1. **Use Zigbee groups** when controlling multiple bulbs together - this ensures consistent manual control detection
+2. **Set reasonable autoreset times** if you want lights to eventually resume adaptation
+3. **Use `pause_changed` mode** if you only adjust brightness or color individually
+4. **Disable `detect_non_ha_changes`** if you experience unexpected light turn-ons

docs/advanced/sleep-mode.md

@@ -0,0 +1,57 @@
+---
+icon: lucide/moon
+---
+
+# Sleep Mode
+
+Sleep mode is a special operating mode that sets your lights to minimal brightness and very warm color, perfect for winding down at night without disrupting your circadian rhythm.
+
+## Activating Sleep Mode
+
+Each Adaptive Lighting configuration creates a sleep mode switch:
+
+```
+switch.adaptive_lighting_sleep_mode_<name>
+```
+
+Turn it on to activate sleep mode:
+
+```yaml
+service: switch.turn_on
+target:
+  entity_id: switch.adaptive_lighting_sleep_mode_living_room
+```
+
+Sleep mode stays active until this switch is turned off. It does not turn off
+automatically at sunrise, and Home Assistant restores its previous state after a
+restart. Use an automation, such as the sleep-mode blueprint linked under
+Automation Examples, when you want the switch to follow a schedule or helper.
+
+If lights unexpectedly use `sleep_brightness` or `sleep_color_temp` during the
+day, first check that the sleep-mode switch is off. While the main Adaptive
+Lighting switch is on, it reports the current calculated `brightness_pct` and
+`color_temp_kelvin` targets, including the sleep settings while sleep mode is on.
+You can compare these attributes with the physical light state. They are `None`
+when the main switch is off. In debug logs,
+`initial_sleep=True` describes an internal delay before sending a command; it does
+not mean that sleep mode is active.
+
+## Configuration Options
+
+Sleep mode is configured through the main Adaptive Lighting configuration. See the [Configuration](../configuration.md) page for the full options table. The sleep-related options are:
+
+| Option | Default | Description |
+|--------|---------|-------------|
+| `sleep_brightness` | 1 | Brightness percentage in sleep mode |
+| `sleep_rgb_or_color_temp` | `color_temp` | Use `rgb_color` or `color_temp` in sleep mode |
+| `sleep_color_temp` | 1000 | Color temperature in Kelvin for sleep mode |
+| `sleep_rgb_color` | `[255, 56, 0]` | RGB color for sleep mode |
+| `sleep_transition` | 1 | Transition duration in seconds |
+| `transition_until_sleep` | false | Gradually transition to sleep settings after sunset |
+
+## Automation Examples
+
+See [Automation Examples](../automation-examples.md) for sleep mode automation recipes, including:
+
+- Toggle sleep mode using an `input_boolean`
+- Set sunrise/sunset based on alarm time

docs/assets/stylesheets/extra.css

@@ -0,0 +1,46 @@
+/* Adaptive Lighting Documentation Custom Styles */
+
+/* Hero section on index page */
+.md-content__inner > h1:first-child {
+  font-size: 2.5rem;
+  margin-bottom: 0.5rem;
+}
+
+/* Logo in header - make it slightly larger */
+.md-header__button.md-logo img {
+  height: 1.8rem;
+}
+
+/* Simulator link button styling */
+.simulator-link {
+  display: inline-block;
+  padding: 0.75rem 1.5rem;
+  background: linear-gradient(135deg, var(--md-primary-fg-color), var(--md-accent-fg-color));
+  color: white !important;
+  text-decoration: none;
+  border-radius: 2rem;
+  font-weight: 600;
+  font-size: 1.1rem;
+  transition: transform 0.2s ease, box-shadow 0.2s ease;
+  box-shadow: 0 4px 15px rgba(0, 0, 0, 0.2);
+}
+
+.simulator-link:hover {
+  transform: translateY(-2px);
+  box-shadow: 0 6px 20px rgba(0, 0, 0, 0.3);
+  text-decoration: none;
+}
+
+/* Code block improvements */
+.highlight code {
+  font-size: 0.85rem;
+}
+
+/* Table improvements */
+.md-typeset table:not([class]) {
+  font-size: 0.8rem;
+}
+
+.md-typeset table:not([class]) th {
+  font-weight: 700;
+}

docs/automation-examples.md

@@ -0,0 +1,471 @@
+---
+icon: lucide/bot
+---
+
+# Automation Examples
+
+Real-world automation examples showing how to integrate Adaptive Lighting with your Home Assistant setup.
+
+<!-- CODE:START -->
+<!-- from adaptive_lighting.docs_gen import _transform_readme_links -->
+<!-- print(_transform_readme_links(include_section("../README.md", "automation-examples", strip_heading=True))) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+Replace every entity ID below with the IDs from your Home Assistant instance. Fresh Adaptive Lighting profiles use child IDs such as `switch.adaptive_lighting_living_room_sleep_mode`; profiles created before the device-based entity change may retain older IDs.
+
+Blocks that begin with `- alias` are entries for `automations.yaml`. Blocks with a top-level `script:` or `adaptive_lighting:` key are complete `configuration.yaml` examples. If your configuration uses `script: !include scripts.yaml`, omit that outer key and place its contents in `scripts.yaml`.
+
+Five examples also have blueprints with selectors, so you can configure them without editing YAML:
+
+| Blueprint | Purpose | Import |
+| --- | --- | --- |
+| [Sleep mode](https://github.com/basnijholt/adaptive-lighting/blob/main/blueprints/automation/sleep_mode.yaml) | Synchronize several profiles with one sleep-mode helper. | [![Import blueprint](https://my.home-assistant.io/badges/blueprint_import.svg)](https://my.home-assistant.io/redirect/blueprint_import/?blueprint_url=https%3A%2F%2Fgithub.com%2Fbasnijholt%2Fadaptive-lighting%2Fblob%2Fmain%2Fblueprints%2Fautomation%2Fsleep_mode.yaml) |
+| [Minimum brightness](https://github.com/basnijholt/adaptive-lighting/blob/main/blueprints/automation/turn_off_at_minimum.yaml) | Turn one light off when its target crosses down to the minimum. | [![Import blueprint](https://my.home-assistant.io/badges/blueprint_import.svg)](https://my.home-assistant.io/redirect/blueprint_import/?blueprint_url=https%3A%2F%2Fgithub.com%2Fbasnijholt%2Fadaptive-lighting%2Fblob%2Fmain%2Fblueprints%2Fautomation%2Fturn_off_at_minimum.yaml) |
+| [Pause at minimum](https://github.com/basnijholt/adaptive-lighting/blob/main/blueprints/automation/manual_control_at_minimum.yaml) | Pause brightness through manual control, using its existing reset behavior. | [![Import blueprint](https://my.home-assistant.io/badges/blueprint_import.svg)](https://my.home-assistant.io/redirect/blueprint_import/?blueprint_url=https%3A%2F%2Fgithub.com%2Fbasnijholt%2Fadaptive-lighting%2Fblob%2Fmain%2Fblueprints%2Fautomation%2Fmanual_control_at_minimum.yaml) |
+| [Schedule profile](https://github.com/basnijholt/adaptive-lighting/blob/main/blueprints/automation/schedule_profile.yaml) | Apply brightness and color temperature from Schedule helper blocks. | [![Import blueprint](https://my.home-assistant.io/badges/blueprint_import.svg)](https://my.home-assistant.io/redirect/blueprint_import/?blueprint_url=https%3A%2F%2Fgithub.com%2Fbasnijholt%2Fadaptive-lighting%2Fblob%2Fmain%2Fblueprints%2Fautomation%2Fschedule_profile.yaml) |
+| [Daylight limit](https://github.com/basnijholt/adaptive-lighting/blob/main/blueprints/automation/daylight_limit.yaml) | Lower maximum brightness in strong daylight. | [![Import blueprint](https://my.home-assistant.io/badges/blueprint_import.svg)](https://my.home-assistant.io/redirect/blueprint_import/?blueprint_url=https%3A%2F%2Fgithub.com%2Fbasnijholt%2Fadaptive-lighting%2Fblob%2Fmain%2Fblueprints%2Fautomation%2Fdaylight_limit.yaml) |
+
+Click a blueprint's import badge, confirm the import in Home Assistant, then create an automation and select your entities. You can also copy its source link into **Settings → Automations & scenes → Blueprints → Import Blueprint**. Read the matching example below for setup and behavior. Each blueprint is tested through Home Assistant alongside its YAML example. The built-in manual-control timeout needs no automation; the scripts below remain useful as actions in your own automations.
+
+`change_switch_settings` updates a profile while its main switch is off, but lights are adapted only while that switch is on. It preserves manual-control flags, so manually controlled lights remain paused.
+
+<details markdown="1">
+<summary>Automatically reset manual control after one hour.</summary>
+
+Use the built-in timeout so every new manual change renews a single timer for that light:
+
+```yaml
+adaptive_lighting:
+  - name: "Living Room"
+    lights:
+      - light.living_room
+    autoreset_control_seconds: 3600
+```
+
+This is a top-level `configuration.yaml` example. The timer clears manual control and immediately readapts a light when both it and the Adaptive Lighting switch are on.
+
+</details>
+
+<details markdown="1">
+<summary>Toggle multiple Adaptive Lighting switches to "sleep mode" using an <code>input_boolean.sleep_mode</code>.</summary>
+
+Also available as a [blueprint](https://github.com/basnijholt/adaptive-lighting/blob/main/blueprints/automation/sleep_mode.yaml). Select an input boolean and the sleep-mode switches it should control.
+
+```yaml
+- alias: "Adaptive lighting: toggle 'sleep mode'"
+  mode: restart
+  trigger:
+    - platform: state
+      entity_id: input_boolean.sleep_mode
+    - platform: homeassistant
+      event: start  # apply the helper's restored state
+  variables:
+    sleep_mode: "{{ states('input_boolean.sleep_mode') }}"
+  conditions:
+    - condition: template
+      value_template: "{{ sleep_mode in ['on', 'off'] }}"
+  actions:
+    - action: "switch.turn_{{ sleep_mode }}"
+      target:
+        entity_id:
+          - switch.adaptive_lighting_living_room_sleep_mode
+          - switch.adaptive_lighting_bedroom_sleep_mode
+```
+
+</details>
+
+<details markdown="1">
+<summary>Turn a light off when its adaptive brightness target reaches the minimum.</summary>
+
+Prefer a form over editing YAML? Import the [blueprint](https://github.com/basnijholt/adaptive-lighting/blob/main/blueprints/automation/turn_off_at_minimum.yaml) in Home Assistant under **Settings → Automations & scenes → Blueprints → Import Blueprint**. Select your profile, its matching adapt brightness switch, one light managed by that profile, and its minimum brightness percentage. Create one automation per light. If you change the profile's minimum later, update the automation too. The blueprint and YAML example below have the same behavior.
+
+The Adaptive Lighting switch already exposes its calculated `brightness_pct` target. Use its state changes to choose a power policy in an automation; no custom event is needed. This example assumes `min_brightness: 1`. Change `minimum_pct` to match your profile, and replace the switch and light entity IDs with your own.
+
+The comparison uses the same rounded 0–255 brightness as an adaptation command. Comparing floating-point percentages for exact equality can miss the minimum between updates. This detects the calculated target reaching its minimum command, not the bulb finishing a transition or reaching its physical dimming limit.
+
+```yaml
+- alias: "Adaptive lighting: turn off at minimum brightness"
+  mode: single
+  triggers:
+    - trigger: state
+      entity_id: switch.adaptive_lighting_living_room
+      attribute: brightness_pct
+  conditions:
+    - condition: state
+      entity_id:
+        - switch.adaptive_lighting_living_room
+        - switch.adaptive_lighting_living_room_adapt_brightness
+      state: "on"
+    - condition: template
+      value_template: >-
+        {% set minimum_pct = 1 %}
+        {% set minimum = (minimum_pct * 255 / 100) | round(0) %}
+        {% set before = trigger.from_state.attributes.get('brightness_pct')
+                        if trigger.from_state else none %}
+        {% set after = trigger.to_state.attributes.get('brightness_pct')
+                       if trigger.to_state else none %}
+        {{ is_number(before) and is_number(after)
+           and (before | float * 255 / 100) | round(0) > minimum
+           and (after | float * 255 / 100) | round(0) <= minimum }}
+    - condition: state
+      entity_id: light.living_room
+      state: "on"
+    - condition: template
+      value_template: >-
+        {{ 'light.living_room' not in
+           (state_attr('switch.adaptive_lighting_living_room', 'manual_control') or []) }}
+  actions:
+    - action: light.turn_off
+      target:
+        entity_id: light.living_room
+```
+
+This runs once when a valid target crosses down into the minimum range. It skips lights currently marked as manually controlled, does not repeatedly turn them off while the target remains low, and does not turn them back on later. Startup or re-enabling the profile while already at the minimum is not a new crossing. Sleep mode can also cause a crossing if its brightness is at or below the chosen minimum. Changing sleep mode clears manual control by default; set `reset_manual_control_on_sleep_mode_change: false` if you want to preserve it. For a bedtime-only policy, trigger directly on the sleep-mode switch changing to `on` instead.
+
+</details>
+
+<details markdown="1">
+<summary>Pause brightness at the minimum using manual control.</summary>
+
+Use the [blueprint](https://github.com/basnijholt/adaptive-lighting/blob/main/blueprints/automation/manual_control_at_minimum.yaml) to mark an individual light's brightness as manually controlled when the calculated target reaches its minimum. The light stays on and the adaptation switches stay enabled. Set `take_over_control_mode: pause_changed` on the profile to keep adapting color; the default `pause_all` pauses both attributes.
+
+Select the profile, its adapt-brightness switch, and a light managed by it. Match the minimum percentage to the profile's `min_brightness`. This YAML example assumes `min_brightness: 1`; change `minimum_pct` and the entity IDs to match your setup.
+
+```yaml
+- alias: "Adaptive lighting: pause brightness at minimum"
+  mode: single
+  variables:
+    minimum_pct: 1
+    minimum: "{{ (minimum_pct * 255 / 100) | round(0) }}"
+  triggers:
+    - trigger: state
+      entity_id: switch.adaptive_lighting_living_room
+      attribute: brightness_pct
+  conditions:
+    - condition: state
+      entity_id:
+        - switch.adaptive_lighting_living_room
+        - switch.adaptive_lighting_living_room_adapt_brightness
+      state: "on"
+    - condition: template
+      value_template: >-
+        {% set before = trigger.from_state.attributes.get('brightness_pct')
+                        if trigger.from_state else none %}
+        {% set after = trigger.to_state.attributes.get('brightness_pct')
+                       if trigger.to_state else none %}
+        {{ is_number(before) and is_number(after)
+           and (before | float * 255 / 100) | round(0) > minimum
+           and (after | float * 255 / 100) | round(0) <= minimum }}
+    - condition: state
+      entity_id: light.living_room
+      state: "on"
+    - condition: template
+      value_template: >-
+        {{ 'light.living_room' not in
+           (state_attr('switch.adaptive_lighting_living_room', 'manual_control_brightness') or []) }}
+  actions:
+    - variables:
+        light_session: "{{ states.light.living_room.last_changed.isoformat() }}"
+        profile_session: "{{ states.switch.adaptive_lighting_living_room.last_changed.isoformat() }}"
+        brightness_session: "{{ states.switch.adaptive_lighting_living_room_adapt_brightness.last_changed.isoformat() }}"
+    - wait_template: >-
+        {% set target = state_attr('switch.adaptive_lighting_living_room', 'brightness_pct') %}
+        {{ not is_state('light.living_room', 'on')
+           or not is_state('switch.adaptive_lighting_living_room', 'on')
+           or not is_state('switch.adaptive_lighting_living_room_adapt_brightness', 'on')
+           or states.light.living_room.last_changed.isoformat() != light_session
+           or states.switch.adaptive_lighting_living_room.last_changed.isoformat() != profile_session
+           or states.switch.adaptive_lighting_living_room_adapt_brightness.last_changed.isoformat() != brightness_session
+           or not is_number(target) or (target | float * 255 / 100) | round(0) > minimum
+           or 'light.living_room' in
+               (state_attr('switch.adaptive_lighting_living_room', 'manual_control_brightness') or [])
+           or (state_attr('light.living_room', 'brightness') | float(256)) <= minimum }}
+      timeout: "00:05:00"
+      continue_on_timeout: false
+    - condition: template
+      value_template: >-
+        {% set target = state_attr('switch.adaptive_lighting_living_room', 'brightness_pct') %}
+        {{ is_state('light.living_room', 'on')
+           and is_state('switch.adaptive_lighting_living_room', 'on')
+           and is_state('switch.adaptive_lighting_living_room_adapt_brightness', 'on')
+           and states.light.living_room.last_changed.isoformat() == light_session
+           and states.switch.adaptive_lighting_living_room.last_changed.isoformat() == profile_session
+           and states.switch.adaptive_lighting_living_room_adapt_brightness.last_changed.isoformat() == brightness_session
+           and is_number(target) and (target | float * 255 / 100) | round(0) <= minimum
+           and (state_attr('light.living_room', 'brightness') | float(256)) <= minimum
+           and 'light.living_room' not in
+               (state_attr('switch.adaptive_lighting_living_room', 'manual_control_brightness') or []) }}
+    - action: adaptive_lighting.set_manual_control
+      data:
+        entity_id: switch.adaptive_lighting_living_room
+        lights: light.living_room
+        manual_control: >-
+          {{ true if 'light.living_room' in
+             (state_attr('switch.adaptive_lighting_living_room', 'manual_control_color') or [])
+             else 'brightness' }}
+```
+
+The comparison uses the rounded 0–255 target, so it does not depend on sampling an exact floating-point minimum. It waits up to five minutes for the light to report that minimum before marking manual control, so the final dimming command can complete. Reported brightness does not prove physical fade completion. If the light, profile, or adapt-brightness switch is toggled, the target rises, brightness is marked manually controlled elsewhere, or brightness never reaches the minimum, the attempt is abandoned. Lights that cannot report the configured minimum will not be paused. Existing manual color flags are preserved, and lights whose brightness is already manually controlled are left alone. Manual-control state is shared for lights managed by multiple profiles, so their existing takeover policies still apply.
+
+The usual resets apply: turning the light off, the configured `autoreset_control_seconds` timeout, clearing manual control through its service, and existing profile/sleep-switch reset behavior. After a reset, normal adaptation can increase brightness again. This runs once per downward crossing; resetting while the target remains at its minimum does not immediately mark the light again. Startup at the minimum is not a crossing either.
+
+This pauses further dimming as well as brightening. To pause brightness immediately after a brightness change made through Home Assistant, use `take_over_control_mode: pause_changed` with `take_over_control: true`; that needs no additional automation.
+
+</details>
+
+<details markdown="1">
+<summary>Set sunrise and sunset from an alarm.</summary>
+
+Call this script from your alarm automation. It sets one Adaptive Lighting profile's sunrise to the current time and its sunset to 12 hours later on the local clock.
+
+```yaml
+script:
+  set_adaptive_lighting_alarm_times:
+    alias: "Adaptive lighting: set times from alarm"
+    variables:
+      alarm_time: '{{ now().strftime("%H:%M:%S") }}'
+    sequence:
+      - action: adaptive_lighting.change_switch_settings
+        data:
+          entity_id: switch.adaptive_lighting_alarm_lights
+          sunrise_time: "{{ alarm_time }}"
+          sunset_time: >
+            {{ (strptime(alarm_time, "%H:%M:%S") + timedelta(hours=12))
+               .strftime("%H:%M:%S") }}
+```
+
+</details>
+
+<details markdown="1">
+<summary>Use a Schedule helper as a step-based custom lighting profile.</summary>
+
+Also available as a [blueprint](https://github.com/basnijholt/adaptive-lighting/blob/main/blueprints/automation/schedule_profile.yaml). Select the main profile switch and your Schedule helper.
+
+Create a [Schedule helper](https://www.home-assistant.io/integrations/schedule/) named `Adaptive Lighting Profile`. Add time blocks with Additional data like this:
+
+```yaml
+brightness_pct: 20
+color_temp_kelvin: 2500
+```
+
+Use different values for each block. The automation below applies the active block whenever the schedule state or its attributes change. Setting both brightness limits and both color temperature limits to the same value keeps each block at its setpoint. Outside a block, the configured Adaptive Lighting settings are restored.
+
+```yaml
+- alias: "Adaptive lighting: apply scheduled profile"
+  triggers:
+    - trigger: state
+      entity_id: schedule.adaptive_lighting_profile
+    - trigger: homeassistant
+      event: start
+  actions:
+    - choose:
+        - conditions:
+            - condition: state
+              entity_id: schedule.adaptive_lighting_profile
+              state: "on"
+          sequence:
+            - action: adaptive_lighting.change_switch_settings
+              data:
+                entity_id: switch.adaptive_lighting_living_room
+                min_brightness: >
+                  {{ state_attr('schedule.adaptive_lighting_profile', 'brightness_pct') | int(1) }}
+                max_brightness: >
+                  {{ state_attr('schedule.adaptive_lighting_profile', 'brightness_pct') | int(1) }}
+                min_color_temp: >
+                  {{ state_attr('schedule.adaptive_lighting_profile', 'color_temp_kelvin') | int(2000) }}
+                max_color_temp: >
+                  {{ state_attr('schedule.adaptive_lighting_profile', 'color_temp_kelvin') | int(2000) }}
+      default:
+        - action: adaptive_lighting.change_switch_settings
+          data:
+            entity_id: switch.adaptive_lighting_living_room
+            use_defaults: configuration
+  mode: restart
+```
+
+This creates step changes at block boundaries. It does not interpolate between schedule points. Runtime settings also reset when Home Assistant restarts, so the startup trigger reapplies the active block. The default branch restores every configured setting; restore only the four fields explicitly if other automations also change runtime settings.
+
+</details>
+
+<details markdown="1">
+<summary>Reduce daytime brightness when an illuminance sensor detects strong daylight.</summary>
+
+Also available as a [blueprint](https://github.com/basnijholt/adaptive-lighting/blob/main/blueprints/automation/daylight_limit.yaml). Select the profile and sensor, then set the lux thresholds and brightness limits. The high lux threshold must exceed the low threshold; the blueprint does nothing if they are reversed or equal.
+
+Keep a low configured `min_brightness` for late night and let an automation lower `max_brightness` while the room has ample daylight. Use a sensor that is not significantly affected by the controlled lights to avoid a feedback loop.
+
+```yaml
+- alias: "Adaptive lighting: limit brightness in daylight"
+  triggers:
+    - trigger: numeric_state
+      entity_id: sensor.living_room_illuminance
+      above: 300
+    - trigger: numeric_state
+      entity_id: sensor.living_room_illuminance
+      below: 200
+    - trigger: homeassistant
+      event: start
+      id: startup
+  actions:
+    - if:
+        - condition: trigger
+          id: startup
+      then:
+        - wait_template: >
+            {{ is_number(states('sensor.living_room_illuminance')) }}
+          timeout: "00:05:00"
+          continue_on_timeout: false
+    - choose:
+        - conditions:
+            - condition: numeric_state
+              entity_id: sensor.living_room_illuminance
+              above: 300
+          sequence:
+            - action: adaptive_lighting.change_switch_settings
+              data:
+                entity_id: switch.adaptive_lighting_living_room
+                max_brightness: 30
+        - conditions:
+            - condition: numeric_state
+              entity_id: sensor.living_room_illuminance
+              below: 200
+          sequence:
+            - action: adaptive_lighting.change_switch_settings
+              data:
+                entity_id: switch.adaptive_lighting_living_room
+                max_brightness: 100
+  mode: restart
+```
+
+The separate 200 and 300 lux thresholds add hysteresis. After a restart, the automation waits for a numeric sensor state before evaluating it. If the initial value is between the thresholds, Adaptive Lighting keeps its configured maximum. Replace `30` and `100` with your desired daytime limit and normal maximum.
+
+`min_brightness` and `max_brightness` are the solar-midnight and daytime endpoints of the brightness curve. Setting `min_brightness` higher than `max_brightness` is supported and creates an inverted curve that is brighter at night and dimmer during the day. If you only want a daytime limit, keep the reduced maximum at or above the configured minimum.
+
+</details>
+
+<details markdown="1">
+<summary>Turn on Hue-controlled lights with the current Adaptive Lighting values.</summary>
+
+For a Hue button exposed to Home Assistant, call this script from the button automation. It turns on the listed lights directly with the current Adaptive Lighting brightness and color.
+
+```yaml
+script:
+  living_room_adaptive_lighting:
+    alias: "Living room: adaptive lighting"
+    sequence:
+      - action: adaptive_lighting.apply
+        data:
+          entity_id: switch.adaptive_lighting_living_room
+          lights:
+            - light.living_room_ceiling
+            - light.living_room_table
+          turn_on_lights: true
+          transition: 0
+```
+
+This requires Home Assistant to receive the button event. The one-shot `apply` call works while the main Adaptive Lighting switch is off, turns on the listed lights, and applies values even if a light is marked as manually controlled. It leaves the profile switch and manual-control state unchanged.
+
+Adaptive Lighting does not update scenes stored on the Hue Bridge, so scenes activated only inside Hue cannot use this script and retain Hue's operation when Home Assistant is unavailable.
+
+</details>
+
+<details markdown="1">
+<summary>Use a fixed RGB stage before sleep mode.</summary>
+
+This script starts sleep mode with a fixed dim red color, waits 30 minutes, and then restores the configured Adaptive Lighting settings. The main profile switch and the light must already be on.
+
+```yaml
+script:
+  adaptive_lighting_bedtime:
+    alias: "Adaptive lighting: bedtime"
+    mode: restart
+    sequence:
+      - action: adaptive_lighting.change_switch_settings
+        data:
+          entity_id: switch.adaptive_lighting_bedroom
+          sleep_rgb_or_color_temp: rgb_color
+          sleep_rgb_color: [255, 56, 0]
+          sleep_brightness: 20
+      - action: switch.turn_on
+        target:
+          entity_id: switch.adaptive_lighting_bedroom_sleep_mode
+      - delay: "00:30:00"
+      - action: adaptive_lighting.change_switch_settings
+        data:
+          entity_id: switch.adaptive_lighting_bedroom
+          use_defaults: configuration
+```
+
+The light must support RGB color. The first stage uses a fixed brightness rather than following the normal brightness curve. When sleep mode changes from off to on, the default `reset_manual_control_on_sleep_mode_change: true` returns manually controlled lights to Adaptive Lighting control so they receive the stage. If you disable that option, manually controlled lights remain paused. Restoring configuration defaults resets every runtime setting on this Adaptive Lighting switch, so restore only the sleep fields explicitly if other automations also change runtime settings.
+
+Stopping this script or reloading scripts during the delay prevents the final action, leaving the runtime overrides active. To recover, call `adaptive_lighting.change_switch_settings` for the profile with `use_defaults: configuration`. A Home Assistant restart reloads the configured settings.
+
+</details>
+
+<details markdown="1">
+<summary>Run a fixed virtual day across midnight.</summary>
+
+Fixed virtual sunrise and sunset times can cross midnight. This configuration ramps an indoor garden from its minimum at 16:00 to its maximum at 22:00, then back to its minimum at 04:00.
+
+```yaml
+adaptive_lighting:
+  - name: "Indoor Garden"
+    lights:
+      - light.indoor_garden
+    sunrise_time: "16:00:00"
+    sunset_time: "04:00:00"
+    min_brightness: 10
+    max_brightness: 100
+    brightness_mode: linear
+    brightness_mode_time_dark: 0
+    brightness_mode_time_light: 21600  # 6 hours
+```
+
+Adaptive Lighting changes brightness and color while a light is on; it does not manage the light's power schedule. This separate automation turns the example light on and off:
+
+```yaml
+- alias: "Indoor garden: power schedule"
+  triggers:
+    - trigger: time
+      at: "16:00:00"
+      id: turn_on
+    - trigger: time
+      at: "04:00:00"
+      id: turn_off
+    - trigger: homeassistant
+      event: start
+      id: startup
+  actions:
+    - choose:
+        - conditions:
+            - condition: trigger
+              id: turn_on
+          sequence:
+            - action: light.turn_on
+              target:
+                entity_id: light.indoor_garden
+        - conditions:
+            - condition: trigger
+              id: startup
+            - condition: time
+              after: "16:00:00"
+              before: "04:00:00"
+          sequence:
+            - action: light.turn_on
+              target:
+                entity_id: light.indoor_garden
+      default:
+        - action: light.turn_off
+          target:
+            entity_id: light.indoor_garden
+```
+
+Use `min_sunrise_time`, `max_sunrise_time`, `min_sunset_time`, or `max_sunset_time` instead when you want to constrain astronomical sunrise or sunset to an earliest or latest time rather than replace it.
+
+</details>
+
+<!-- OUTPUT:END -->
+
+> [!TIP]
+> **Have a useful automation?** Share your automation examples by [opening an issue](https://github.com/basnijholt/adaptive-lighting/issues) or submitting a pull request to the README.

docs/configuration.md

@@ -0,0 +1,147 @@
+---
+icon: lucide/settings
+---
+
+# Configuration
+
+Adaptive Lighting supports configuration through both YAML and the Home Assistant UI, with identical option names in both methods.
+
+## Basic Configuration
+
+The simplest setup uses the Home Assistant UI. Go to **Settings** → **Devices & Services** → **Add Integration** → **Adaptive Lighting**. No `adaptive_lighting:` entry is needed in `configuration.yaml`.
+
+## YAML Configuration
+
+Alternatively, you can specify lights and options in `configuration.yaml`:
+
+```yaml
+adaptive_lighting:
+  - name: "Living Room"
+    lights:
+      - light.living_room_ceiling
+      - light.living_room_lamp
+```
+
+## All Options
+
+All configuration options are listed below with their default values. These options work identically in both YAML and the UI.
+
+<!-- CODE:START -->
+<!-- from adaptive_lighting._docs_helpers import generate_config_markdown_table -->
+<!-- print(generate_config_markdown_table()) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+| Variable name                               | Description                                                                                                                                                                                                                                                                                                                                                                                   | Default        | Type                                    |
+|:--------------------------------------------|:----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|:---------------|:----------------------------------------|
+| `lights`                                    | List of light entity_ids to be controlled (may be empty). 🌟                                                                                                                                                                                                                                                                                                                                  | `[]`           | list of `entity_id`s                    |
+| `interval`                                  | Frequency to adapt the lights, in seconds. 🔄                                                                                                                                                                                                                                                                                                                                                 | `90`           | `int > 0`                               |
+| `transition`                                | Duration of transition when lights change, in seconds. 🕑                                                                                                                                                                                                                                                                                                                                     | `45`           | `float` 0-6553                          |
+| `initial_transition`                        | Duration of the first transition when lights turn from `off` to `on` in seconds. ⏲️                                                                                                                                                                                                                                                                                                           | `1`            | `float` 0-6553                          |
+| `min_brightness`                            | Minimum brightness percentage. 💡                                                                                                                                                                                                                                                                                                                                                             | `1`            | `int` 1-100                             |
+| `max_brightness`                            | Maximum brightness percentage. 💡                                                                                                                                                                                                                                                                                                                                                             | `100`          | `int` 1-100                             |
+| `min_color_temp`                            | Warmest color temperature in Kelvin. 🔥                                                                                                                                                                                                                                                                                                                                                       | `2000`         | `int` 1000-10000                        |
+| `max_color_temp`                            | Coldest color temperature in Kelvin. ❄️                                                                                                                                                                                                                                                                                                                                                       | `5500`         | `int` 1000-10000                        |
+| `prefer_rgb_color`                          | Whether to prefer RGB color adjustment over light color temperature when possible. 🌈                                                                                                                                                                                                                                                                                                         | `False`        | `bool`                                  |
+| `sleep_brightness`                          | Brightness percentage of lights in sleep mode. 😴                                                                                                                                                                                                                                                                                                                                             | `1`            | `int` 1-100                             |
+| `sleep_rgb_or_color_temp`                   | Use either `"rgb_color"` or `"color_temp"` in sleep mode. 🌙                                                                                                                                                                                                                                                                                                                                  | `color_temp`   | one of `['color_temp', 'rgb_color']`    |
+| `sleep_color_temp`                          | Color temperature in sleep mode (used when `sleep_rgb_or_color_temp` is `color_temp`) in Kelvin. 😴                                                                                                                                                                                                                                                                                           | `1000`         | `int` 1000-10000                        |
+| `sleep_rgb_color`                           | RGB color in sleep mode (used when `sleep_rgb_or_color_temp` is "rgb_color"). 🌈                                                                                                                                                                                                                                                                                                              | `[255, 56, 0]` | RGB color                               |
+| `sleep_transition`                          | Duration of transition when "sleep mode" is toggled in seconds. 😴                                                                                                                                                                                                                                                                                                                            | `1`            | `float` 0-6553                          |
+| `transition_until_sleep`                    | When enabled, Adaptive Lighting will treat sleep settings as the minimum, transitioning to these values after sunset. 🌙                                                                                                                                                                                                                                                                      | `False`        | `bool`                                  |
+| `sunrise_time`                              | Set a fixed time (HH:MM:SS) for sunrise. 🌅                                                                                                                                                                                                                                                                                                                                                   | `None`         | `str`                                   |
+| `min_sunrise_time`                          | Set the earliest virtual sunrise time (HH:MM:SS), allowing for later sunrises. 🌅                                                                                                                                                                                                                                                                                                             | `None`         | `str`                                   |
+| `max_sunrise_time`                          | Set the latest virtual sunrise time (HH:MM:SS), allowing for earlier sunrises. 🌅                                                                                                                                                                                                                                                                                                             | `None`         | `str`                                   |
+| `sunrise_offset`                            | Adjust sunrise time with a positive or negative offset in seconds. ⏰                                                                                                                                                                                                                                                                                                                         | `0`            | `int`                                   |
+| `sunset_time`                               | Set a fixed time (HH:MM:SS) for sunset. 🌇                                                                                                                                                                                                                                                                                                                                                    | `None`         | `str`                                   |
+| `min_sunset_time`                           | Set the earliest virtual sunset time (HH:MM:SS), allowing for later sunsets. 🌇                                                                                                                                                                                                                                                                                                               | `None`         | `str`                                   |
+| `max_sunset_time`                           | Set the latest virtual sunset time (HH:MM:SS), allowing for earlier sunsets. 🌇                                                                                                                                                                                                                                                                                                               | `None`         | `str`                                   |
+| `sunset_offset`                             | Adjust sunset time with a positive or negative offset in seconds. ⏰                                                                                                                                                                                                                                                                                                                          | `0`            | `int`                                   |
+| `brightness_mode`                           | Brightness mode to use. Possible values are `default`, `linear`, and `tanh` (uses `brightness_mode_time_dark` and `brightness_mode_time_light`). 📈                                                                                                                                                                                                                                           | `default`      | one of `['default', 'linear', 'tanh']`  |
+| `brightness_mode_time_dark`                 | (Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness before/after sunrise/sunset. 📈📉                                                                                                                                                                                                                                                             | `900`          | `int`                                   |
+| `brightness_mode_time_light`                | (Ignored if `brightness_mode='default'`) The duration in seconds to ramp up/down the brightness after/before sunrise/sunset. 📈📉.                                                                                                                                                                                                                                                            | `3600`         | `int`                                   |
+| `take_over_control`                         | Pause adaptation of individual lights and hand over (manual) control to other sources that issue `light.turn_on` calls for lights that are on. 🔒                                                                                                                                                                                                                                             | `True`         | `bool`                                  |
+| `take_over_control_mode`                    | The adaptation pausing mode when other sources change brightness and/or color of lights. `pause_all` always pauses both brightness and color adaptation. `pause_changed` pauses the adaptation of only the changed attributes and continues adapting unchanged attributes, e.g., continues color adaptation when only brightness was changed.                                                 | `pause_all`    | one of `['pause_all', 'pause_changed']` |
+| `detect_non_ha_changes`                     | Detects and halts adaptations for non-`light.turn_on` state changes. Needs `take_over_control` enabled. 🕵️ Caution: ⚠️ Some lights might falsely indicate an 'on' state, which could result in lights turning on unexpectedly. Note that this calls `homeassistant.update_entity` every `interval`! Disable this feature if you encounter such issues.                                        | `False`        | `bool`                                  |
+| `autoreset_control_seconds`                 | Automatically reset the manual control after a number of seconds. Set to 0 to disable. ⏲️                                                                                                                                                                                                                                                                                                     | `0`            | `int` 0-31536000                        |
+| `only_once`                                 | Adapt lights only when they are turned on (`true`) or keep adapting them (`false`). 🔄                                                                                                                                                                                                                                                                                                        | `False`        | `bool`                                  |
+| `adapt_only_on_bare_turn_on`                | When turning lights on initially. If set to `true`, AL adapts only if `light.turn_on` is invoked without specifying color or brightness. ❌🌈 This e.g., prevents adaptation when activating a scene and marks the light as manually controlled. If `false`, AL adapts regardless of the presence of color or brightness in the initial `service_data`. Needs `take_over_control` enabled. 🕵️ | `False`        | `bool`                                  |
+| `manual_control_on_external_turn_on`        | Treat turn-ons without a matching Home Assistant `light.turn_on` context as manual control. Normal manual-control resets apply. Still allows `detect_non_ha_changes` for already-on lights. Needs `take_over_control` enabled. 🕵️                                                                                                                                                             | `False`        | `bool`                                  |
+| `reset_manual_control_on_sleep_mode_change` | Reset manual control when the sleep mode switch is toggled. Set to `false` to preserve manual control across sleep mode changes. 😴                                                                                                                                                                                                                                                           | `True`         | `bool`                                  |
+| `separate_turn_on_commands`                 | Use separate `light.turn_on` calls for color and brightness, needed for some light types. 🔀                                                                                                                                                                                                                                                                                                  | `False`        | `bool`                                  |
+| `send_split_delay`                          | Delay (ms) between `separate_turn_on_commands` for lights that don't support simultaneous brightness and color setting. ⏲️                                                                                                                                                                                                                                                                    | `0`            | `int` 0-10000                           |
+| `adapt_delay`                               | Wait time (seconds) between light turn on and Adaptive Lighting applying changes. Might help to avoid flickering. ⏲️                                                                                                                                                                                                                                                                          | `0`            | `float > 0`                             |
+| `skip_redundant_commands`                   | Skip sending adaptation commands whose target state already equals the light's known state. Minimizes network traffic and improves the adaptation responsivity in some situations. 📉Disable if physical light states get out of sync with HA's recorded state.                                                                                                                               | `False`        | `bool`                                  |
+| `intercept`                                 | Intercept and adapt `light.turn_on` calls to enabling instantaneous color and brightness adaptation. 🏎️ Disable for lights that do not support `light.turn_on` with color and brightness.                                                                                                                                                                                                     | `True`         | `bool`                                  |
+| `multi_light_intercept`                     | Intercept and adapt `light.turn_on` calls that target multiple lights. ➗⚠️ This might result in splitting up a single `light.turn_on` call into multiple calls, e.g., when lights are in different switches. Requires `intercept` to be enabled.                                                                                                                                             | `True`         | `bool`                                  |
+| `include_config_in_attributes`              | Show all options as attributes on the switch in Home Assistant when set to `true`. 📝                                                                                                                                                                                                                                                                                                         | `False`        | `bool`                                  |
+| `expand_light_groups`                       | Expand light groups to their members (`true`, default). Set `false` to send commands to the group and track manual control for the group. Explicit member targets in services stay individual targets.                                                                                                                                                                                        | `True`         | `bool`                                  |
+
+<!-- OUTPUT:END -->
+
+## Full Configuration Example
+
+<!-- CODE:START -->
+<!-- from adaptive_lighting.docs_gen import _transform_readme_links -->
+<!-- print(_transform_readme_links(include_section("../README.md", "config-example-full"))) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+Full example:
+
+```yaml
+# Example configuration.yaml entry
+adaptive_lighting:
+- name: "default"
+  lights: []
+  prefer_rgb_color: false
+  transition: 45
+  initial_transition: 1
+  interval: 90
+  min_brightness: 1
+  max_brightness: 100
+  min_color_temp: 2000
+  max_color_temp: 5500
+  sleep_brightness: 1
+  sleep_color_temp: 1000
+  sunrise_time: "08:00:00"  # override the sunrise time
+  sunrise_offset:
+  sunset_time:
+  sunset_offset: 1800  # in seconds or '00:30:00'
+  take_over_control: true
+  detect_non_ha_changes: false
+  only_once: false
+
+```
+
+<!-- OUTPUT:END -->
+
+## Multiple Configurations
+
+You can create multiple Adaptive Lighting configurations for different areas or use cases:
+
+```yaml
+adaptive_lighting:
+  - name: "Daytime Spaces"
+    lights:
+      - light.living_room
+      - light.kitchen
+      - light.office
+    min_brightness: 30
+    max_brightness: 100
+
+  - name: "Bedroom"
+    lights:
+      - light.bedroom_ceiling
+      - light.bedroom_lamp
+    min_brightness: 5
+    max_brightness: 80
+    sleep_brightness: 1
+    sleep_color_temp: 1000
+```
+
+## Related Topics
+
+- [Brightness Modes](advanced/brightness-modes.md) - Detailed explanation of brightness calculation modes
+- [Sleep Mode](advanced/sleep-mode.md) - Sleep mode configuration
+- [Manual Control](advanced/manual-control.md) - How manual control detection works

docs/getting-started.md

@@ -0,0 +1,102 @@
+---
+icon: lucide/rocket
+---
+
+# Getting Started
+
+This guide will help you install and configure Adaptive Lighting for the first time.
+
+## Prerequisites
+
+- [Home Assistant](https://www.home-assistant.io/) 2025.9.0 or newer
+- [HACS](https://hacs.xyz/) (Home Assistant Community Store) installed
+
+## Installation
+
+### Via HACS (Recommended)
+
+1. Open HACS in your Home Assistant instance
+2. Click on **Integrations**
+3. Click the **+ Explore & Download Repositories** button
+4. Search for "Adaptive Lighting"
+5. Click **Download**
+6. Restart Home Assistant
+
+Or use this button to open HACS directly:
+
+[![Open your Home Assistant instance and open the Adaptive Lighting integration inside the Home Assistant Community Store.](https://my.home-assistant.io/badges/hacs_repository.svg)](https://my.home-assistant.io/redirect/hacs_repository/?owner=basnijholt&repository=adaptive-lighting&category=integration)
+
+### Manual Installation
+
+1. Download the latest release from [GitHub](https://github.com/basnijholt/adaptive-lighting/releases)
+2. Extract the `adaptive_lighting` folder to your `config/custom_components/` directory
+3. Restart Home Assistant
+
+## Configuration
+
+Choose one of two configuration methods:
+
+=== "Via UI"
+
+    1. Go to **Settings** → **Devices & Services**
+    2. Click **+ Add Integration**
+    3. Search for "Adaptive Lighting"
+    4. Follow the setup wizard to name your Adaptive Lighting instance
+    5. Find Adaptive Lighting and click **Configure**
+    6. Select your lights and adjust the settings
+
+    No `adaptive_lighting:` entry is needed in `configuration.yaml`.
+
+=== "Via YAML"
+
+    Instances configured through YAML must be edited in YAML.
+
+    ```yaml
+    adaptive_lighting:
+      - name: "Living Room"
+        lights:
+          - light.living_room_ceiling
+          - light.living_room_lamp
+        min_brightness: 20
+        max_brightness: 100
+        min_color_temp: 2200
+        max_color_temp: 5500
+    ```
+
+    Restart Home Assistant after changing the YAML configuration.
+
+## Basic YAML Configuration Example
+
+Here's a simple configuration to get you started:
+
+```yaml
+adaptive_lighting:
+  - name: "Main Lights"
+    lights:
+      - light.living_room
+      - light.bedroom
+      - light.kitchen
+    transition: 30
+    min_brightness: 10
+    max_brightness: 100
+    min_color_temp: 2000
+    max_color_temp: 5500
+```
+
+## Verifying Installation
+
+After configuration, you should see new switches in Home Assistant:
+
+- `switch.adaptive_lighting_main_lights`
+- `switch.adaptive_lighting_sleep_mode_main_lights`
+- `switch.adaptive_lighting_adapt_brightness_main_lights`
+- `switch.adaptive_lighting_adapt_color_main_lights`
+
+Turn on `switch.adaptive_lighting_main_lights` to start adapting your lights!
+
+## Next Steps
+
+- [Configuration Reference](configuration.md) - Explore all available options
+- [Services](services.md) - Learn about service calls for automations
+- [Automation Examples](automation-examples.md) - See real-world automation recipes
+- [Troubleshooting](troubleshooting.md) - Common issues and solutions

docs/index.md

@@ -0,0 +1,74 @@
+---
+icon: lucide/sun
+---
+
+# Adaptive Lighting
+
+**Enhance Your Home's Atmosphere with Smart, Sun-Synchronized Lighting**
+
+<div style="text-align: center; margin: 2rem 0;">
+  <img src="assets/logo.png" alt="Adaptive Lighting Logo" width="200" />
+</div>
+
+[Adaptive Lighting](https://github.com/basnijholt/adaptive-lighting) is a custom component for [Home Assistant](https://www.home-assistant.io/) that intelligently adjusts the brightness and color of your lights based on the sun's position, while still allowing for manual control.
+
+<div style="text-align: center; margin: 2rem 0;">
+  <a href="https://my.home-assistant.io/redirect/hacs_repository/?owner=basnijholt&repository=adaptive-lighting&category=integration" class="md-button md-button--primary">
+    Install via HACS
+  </a>
+  <a href="simulator/" class="md-button">
+    Try the Simulator
+  </a>
+</div>
+
+By automatically adapting the settings of your lights throughout the day, Adaptive Lighting helps maintain your natural circadian rhythm, which can lead to improved sleep, mood, and overall well-being. Experience cooler color temperatures at noon, gradually transitioning to warmer colors at sunset and sunrise.
+
+## Features
+
+<!-- CODE:START -->
+<!-- from adaptive_lighting.docs_gen import _transform_readme_links -->
+<!-- print(_transform_readme_links(include_section("../README.md", "features", strip_heading=True))) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+When initially turning on a light that is controlled by Adaptive Lighting, the `light.turn_on` service call is intercepted, and the light's brightness and color are automatically adjusted based on the sun's position.
+After that, the light's brightness and color are automatically adjusted at a regular interval.
+
+Adaptive Lighting provides four switches (using "living_room" as an example component name):
+
+- `switch.adaptive_lighting_living_room`: Turn Adaptive Lighting on or off and view current light settings through its attributes.
+- `switch.adaptive_lighting_sleep_mode_living_room`: Activate "sleep mode" 😴 and set custom sleep_brightness and sleep_color_temp.
+- `switch.adaptive_lighting_adapt_brightness_living_room`: Enable or disable brightness adaptation 🔆 for supported lights.
+- `switch.adaptive_lighting_adapt_color_living_room`: Enable or disable color adaptation 🌈 for supported lights.
+
+<!-- OUTPUT:END -->
+
+## Quick Start
+
+1. **Install via HACS**: Search for "Adaptive Lighting" in the [Home Assistant Community Store](https://hacs.xyz/)
+2. **Add the integration**: Go to **Settings** → **Devices & Services** → **Add Integration** → **Adaptive Lighting**, then name your instance
+3. **Configure**: Open Adaptive Lighting, click **Configure**, select your lights, and adjust the settings. No YAML entry is needed.
+
+[Get Started →](getting-started.md){ .md-button .md-button--primary }
+[View All Options →](configuration.md){ .md-button }
+
+## How It Works
+
+Adaptive Lighting provides four switches for each configuration (using "living_room" as an example):
+
+| Switch | Purpose |
+|--------|---------|
+| `switch.adaptive_lighting_living_room` | Main on/off control |
+| `switch.adaptive_lighting_sleep_mode_living_room` | Activate sleep mode |
+| `switch.adaptive_lighting_adapt_brightness_living_room` | Enable/disable brightness adaptation |
+| `switch.adaptive_lighting_adapt_color_living_room` | Enable/disable color adaptation |
+
+## Interactive Simulator
+
+Visualize how Adaptive Lighting will work with your settings using the interactive simulator:
+
+<div style="text-align: center; margin: 2rem 0;">
+  <a href="simulator/" class="simulator-link">
+    Try the Interactive Simulator
+  </a>
+</div>

docs/overrides/partials/integrations/analytics/custom.html

@@ -0,0 +1,6 @@
+<!-- Privacy-friendly analytics by Plausible -->
+<script async src="https://plausible.nijho.lt/js/pa-yNpTS2silFzWxGYjHM_Bk.js"></script>
+<script>
+  window.plausible=window.plausible||function(){(plausible.q=plausible.q||[]).push(arguments)},plausible.init=plausible.init||function(i){plausible.o=i||{}};
+  plausible.init()
+</script>

docs/run_markdown_code_runner.py

@@ -0,0 +1,71 @@
+#!/usr/bin/env python3
+# ruff: noqa: T201, S603, S607
+"""Update all markdown files that use markdown-code-runner for auto-generation.
+
+Run from repo root: uv run python docs/run_markdown_code_runner.py
+"""
+
+from __future__ import annotations
+
+import subprocess
+import sys
+from pathlib import Path
+
+
+def find_markdown_files_with_code_blocks(docs_dir: Path) -> list[Path]:
+    """Find all markdown files containing markdown-code-runner markers."""
+    files_with_code = []
+    for md_file in docs_dir.rglob("*.md"):
+        content = md_file.read_text()
+        if "<!-- CODE:START -->" in content:
+            files_with_code.append(md_file)
+    return sorted(files_with_code)
+
+
+def run_markdown_code_runner(files: list[Path], repo_root: Path) -> bool:
+    """Run markdown-code-runner on all files. Returns True if all succeeded."""
+    if not files:
+        print("No files with CODE:START markers found.")
+        return True
+
+    print(f"Found {len(files)} file(s) with auto-generated content:")
+    for f in files:
+        print(f"  - {f.relative_to(repo_root)}")
+    print()
+
+    all_success = True
+    for file in files:
+        rel_path = file.relative_to(repo_root)
+        print(f"Updating {rel_path}...", end=" ", flush=True)
+        result = subprocess.run(
+            ["markdown-code-runner", str(file)],
+            check=False,
+            capture_output=True,
+            text=True,
+        )
+        if result.returncode == 0:
+            print("✓")
+        else:
+            print("✗")
+            print(f"  Error: {result.stderr}")
+            all_success = False
+
+    return all_success
+
+
+def main() -> int:
+    """Main entry point."""
+    repo_root = Path(__file__).parent.parent
+
+    # Process docs/ files and README.md
+    files = find_markdown_files_with_code_blocks(repo_root / "docs")
+    readme = repo_root / "README.md"
+    if readme.exists() and "<!-- CODE:START -->" in readme.read_text():
+        files.append(readme)
+
+    success = run_markdown_code_runner(files, repo_root)
+    return 0 if success else 1
+
+
+if __name__ == "__main__":
+    sys.exit(main())

docs/see-also.md

@@ -0,0 +1,73 @@
+---
+icon: lucide/external-link
+---
+
+# See Also
+
+Resources, tutorials, and related projects for Adaptive Lighting.
+
+## Tutorials & Articles
+
+<!-- CODE:START -->
+<!-- from adaptive_lighting.docs_gen import _transform_readme_links -->
+<!-- print(_transform_readme_links(include_section("../README.md", "see-also", strip_heading=True))) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+- [*Sleep better with Adaptive Lighting in Home Assistant*](https://wartner.io/sleep-better-with-adaptive-lightning-in-home-assistant/) by Florian Wartner on 2023-02-23 (blog post 📜)
+- [*Automatic smart light brightness and color based on the sun*](https://www.youtube.com/watch?v=Rg3zI1Oyk3c) by Home Automation Guy on 2022-08-31 (YouTube video 📺)
+- [*Adaptive Lighting Blew My Mind in Home Assistant - How to set it up*](https://www.youtube.com/watch?v=c1cnccmgl3k) by Smart Home Junkie on 2022-06-26 (YouTube video 📺)
+
+<!-- OUTPUT:END -->
+
+## Interactive Tools
+
+### Adaptive Lighting Simulator
+
+Visualize how different settings affect your lighting throughout the day:
+
+<div style="text-align: center; margin: 2rem 0;">
+  <a href="../simulator/" class="simulator-link">
+    Open the Simulator
+  </a>
+</div>
+
+The simulator lets you:
+
+- Adjust all configuration parameters in real-time
+- See how brightness and color temperature change throughout the day
+- Visualize the effects of different `brightness_mode` settings
+- Test sleep mode transitions
+
+## Related Projects
+
+### Circadian Lighting
+
+Adaptive Lighting was initially inspired by [hass-circadian_lighting](https://github.com/claytonjn/hass-circadian_lighting) by @claytonjn, but has since been entirely rewritten and expanded with many new features.
+
+## Official Documentation
+
+- [Home Assistant Documentation (PR Preview)](https://deploy-preview-14877--home-assistant-docs.netlify.app/integrations/adaptive_lighting/)
+- [Home Assistant Community Store (HACS)](https://hacs.xyz/)
+
+## Community
+
+- [Home Assistant Community Forums](https://community.home-assistant.io/)
+- [Home Assistant Discord](https://discord.gg/home-assistant)
+- [Reddit r/homeassistant](https://www.reddit.com/r/homeassistant/)
+
+## Contributing
+
+Interested in contributing to Adaptive Lighting?
+
+- [GitHub Repository](https://github.com/basnijholt/adaptive-lighting)
+- [Issue Tracker](https://github.com/basnijholt/adaptive-lighting/issues)
+- [Translation via Weblate](https://hosted.weblate.org/engage/adaptive-lighting/)
+
+### Translation
+
+Help translate Adaptive Lighting into your language on [Hosted Weblate](https://hosted.weblate.org/engage/adaptive-lighting/). No programming knowledge required!
+
+<a href="https://hosted.weblate.org/engage/adaptive-lighting/">
+<img src="https://hosted.weblate.org/widget/adaptive-lighting/multi-auto.svg" alt="Translation status" />
+</a>

docs/services.md

@@ -0,0 +1,203 @@
+---
+icon: lucide/zap
+---
+
+# Services
+
+Adaptive Lighting provides three services for programmatic control, allowing you to integrate with automations and scripts.
+
+## adaptive_lighting.apply
+
+Applies the current Adaptive Lighting settings to lights on demand. Useful for forcing an immediate update or applying settings to lights that aren't in the regular adaptation cycle.
+Provide a switch in `entity_id`, a list of `lights`, or both.
+
+### Parameters
+
+<!-- CODE:START -->
+<!-- from adaptive_lighting._docs_helpers import generate_apply_markdown_table -->
+<!-- print(generate_apply_markdown_table()) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+| Service data attribute   | Description                                                                           | Required   | Type                 |
+|:-------------------------|:--------------------------------------------------------------------------------------|:-----------|:---------------------|
+| `entity_id`              | The `entity_id` of the switch with the settings to apply. 📝                          | ❌         | list of `entity_id`s |
+| `lights`                 | A light (or list of lights) to apply the settings to. 💡                              | ❌         | list of `entity_id`s |
+| `transition`             | Duration of transition when lights change, in seconds. 🕑                             | ❌         | `float` 0-6553       |
+| `adapt_brightness`       | Whether to adapt the brightness of the light. 🌞                                      | ❌         | bool                 |
+| `adapt_color`            | Whether to adapt the color on supporting lights. 🌈                                   | ❌         | bool                 |
+| `prefer_rgb_color`       | Whether to prefer RGB color adjustment over light color temperature when possible. 🌈 | ❌         | bool                 |
+| `turn_on_lights`         | Whether to turn on lights that are currently off. 🔆                                  | ❌         | bool                 |
+
+<!-- OUTPUT:END -->
+
+### Example Usage
+
+```yaml
+# Apply current settings to specific lights
+service: adaptive_lighting.apply
+data:
+  entity_id: switch.adaptive_lighting_living_room
+  lights:
+    - light.floor_lamp
+    - light.desk_lamp
+  turn_on_lights: false
+```
+
+```yaml
+# Force apply with custom transition
+service: adaptive_lighting.apply
+data:
+  entity_id: switch.adaptive_lighting_bedroom
+  transition: 5
+  adapt_brightness: true
+  adapt_color: true
+```
+
+---
+
+## adaptive_lighting.set_manual_control
+
+Marks or unmarks a light as "manually controlled". When a light is marked as manually controlled, Adaptive Lighting will not adjust it until the manual control flag is cleared.
+Provide a switch in `entity_id`, a list of `lights`, or both.
+
+### Parameters
+
+<!-- CODE:START -->
+<!-- from adaptive_lighting._docs_helpers import generate_set_manual_control_markdown_table -->
+<!-- print(generate_set_manual_control_markdown_table()) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+| Service data attribute   | Description                                                                                                                                                            | Required   | Type                                     |
+|:-------------------------|:-----------------------------------------------------------------------------------------------------------------------------------------------------------------------|:-----------|:-----------------------------------------|
+| `entity_id`              | The `entity_id` of the switch in which to (un)mark the light as being `manually controlled`. 📝                                                                        | ❌         | list of `entity_id`s                     |
+| `lights`                 | entity_id(s) of lights, if not specified, all lights in the switch are selected. 💡                                                                                    | ❌         | list of `entity_id`s                     |
+| `manual_control`         | Whether to add ("true") or remove ("false") all adapted attributes of the light from the "manual_control" list, or the name of an attribute for selective addition. 🔒 | ❌         | bool or one of `['brightness', 'color']` |
+
+<!-- OUTPUT:END -->
+
+### Example Usage
+
+```yaml
+# Remove manual control from a light (resume adaptation)
+service: adaptive_lighting.set_manual_control
+data:
+  entity_id: switch.adaptive_lighting_living_room
+  lights:
+    - light.floor_lamp
+  manual_control: false
+```
+
+```yaml
+# Mark a light as manually controlled (pause adaptation)
+service: adaptive_lighting.set_manual_control
+data:
+  entity_id: switch.adaptive_lighting_living_room
+  lights:
+    - light.floor_lamp
+  manual_control: true
+```
+
+```yaml
+# Only pause brightness adaptation, continue color adaptation
+service: adaptive_lighting.set_manual_control
+data:
+  entity_id: switch.adaptive_lighting_living_room
+  lights:
+    - light.floor_lamp
+  manual_control: brightness
+```
+
+---
+
+## adaptive_lighting.change_switch_settings
+
+<!-- CODE:START -->
+<!-- from adaptive_lighting.docs_gen import _transform_readme_links -->
+<!-- print(_transform_readme_links(include_section("../README.md", "change-switch-settings", strip_heading=True))) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+`adaptive_lighting.change_switch_settings` (new in 1.7.0) Change any of the above configuration options of Adaptive Lighting (such as `sunrise_time` or `prefer_rgb_color`) with a service call directly from your script/automation.
+
+> [!WARNING]
+> These settings will **not** be written to your config and will be reset on restart of Home Assistant! You can see the current settings in the `switch.adaptive_lighting_XXX` attributes if `include_config_in_attributes` is enabled.
+
+| Service data attribute                                    | Required | Description                                                                                                                                                                                                                                                                                                  |
+| --------------------------------------------------------- | -------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| `use_defaults`                                            | ❌        | (default: `current` for current settings) Choose from `factory`, `configuration`, or `current` to reset variables not being set with this service call. `current` leaves them as they are, `configuration` resets to initial startup values, `factory` resets to default values listed in the documentation. |
+| **all other keys** (except the ones in the table below ⚠️) | ❌        | See the table below for disallowed keys.                                                                                                                                                                                                                                                                     |
+
+The following keys are disallowed:
+
+| **DISALLOWED** service data | Description                                                                                     |
+| --------------------------- | ----------------------------------------------------------------------------------------------- |
+| `entity_id`                 | You cannot change the switch's `entity_id`, as it has already been registered.                  |
+| `lights`                    | You may call `adaptive_lighting.apply` with your lights or create a new config instead.         |
+| `name`                      | You can rename your switch's display name in Home Assistant's UI.                               |
+| `interval`                  | The interval is used only once when the config loads. A config change and restart are required. |
+
+<!-- OUTPUT:END -->
+
+### Example Usage
+
+```yaml
+# Temporarily change color temperature range
+service: adaptive_lighting.change_switch_settings
+data:
+  entity_id: switch.adaptive_lighting_living_room
+  min_color_temp: 2500
+  max_color_temp: 4000
+```
+
+```yaml
+# Override sunrise time for the day
+service: adaptive_lighting.change_switch_settings
+data:
+  entity_id: switch.adaptive_lighting_bedroom
+  sunrise_time: "07:00:00"
+  use_defaults: current
+```
+
+```yaml
+# Reset to configuration defaults
+service: adaptive_lighting.change_switch_settings
+data:
+  entity_id: switch.adaptive_lighting_living_room
+  use_defaults: configuration
+```
+
+---
+
+## Events
+
+Adaptive Lighting also fires events that you can use in automations.
+
+### adaptive_lighting.manual_control
+
+Fired when a light is marked as "manually controlled" due to a detected manual change.
+
+**Event Data:**
+
+| Attribute | Description |
+|-----------|-------------|
+| `entity_id` | The light that was marked as manually controlled |
+| `switch` | The Adaptive Lighting switch entity |
+
+### Example Automation
+
+```yaml
+automation:
+  - alias: "Log manual control events"
+    trigger:
+      platform: event
+      event_type: adaptive_lighting.manual_control
+    action:
+      - service: notify.mobile_app
+        data:
+          title: "Adaptive Lighting"
+          message: "{{ trigger.event.data.entity_id }} was manually controlled"
+```
+
+See [Automation Examples](automation-examples.md) for more use cases.

docs/troubleshooting.md

@@ -0,0 +1,133 @@
+---
+icon: lucide/life-buoy
+---
+
+# Troubleshooting
+
+This guide covers common issues and their solutions when using Adaptive Lighting.
+
+## Enable Debug Logging
+
+<!-- CODE:START -->
+<!-- from adaptive_lighting.docs_gen import _transform_readme_links -->
+<!-- print(_transform_readme_links(include_section("../README.md", "troubleshooting-intro", strip_heading=True))) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+Encountering issues? Enable debug logging in your `configuration.yaml`:
+
+```yaml
+logger:
+  default: warning
+  logs:
+    custom_components.adaptive_lighting: debug
+```
+
+After the issue occurs, create a new issue report with the log (`/config/home-assistant.log`).
+
+For support, use Home Assistant's **Download diagnostics** action on the
+Adaptive Lighting config entry. The download is an on-demand snapshot of the
+profile's current switches and currently tracked light targets. It does not
+refresh group membership or predict targets a disabled profile would use after
+being enabled. It does not create live sensors; existing switch attributes
+remain the interface for automations.
+The reported last adaptation values are the shared manager's latest retained
+value for each attribute. They can come from different commands and do not
+represent one sent command or the current desired state.
+
+<!-- OUTPUT:END -->
+
+## Common Problems & Solutions
+
+<!-- CODE:START -->
+<!-- from adaptive_lighting.docs_gen import _transform_readme_links -->
+<!-- print(_transform_readme_links(include_section("../README.md", "common-problems", strip_heading=True))) -->
+<!-- CODE:END -->
+<!-- OUTPUT:START -->
+<!-- ⚠️ This content is auto-generated by `markdown-code-runner`. -->
+#### :bulb: Lights Only Adapt After Reloading
+
+If lights stop adapting after you turn them on with a physical switch or a Zigbee-bound remote, check the Adaptive Lighting switch's `manual_control` attribute. With `take_over_control: true` and `detect_non_ha_changes: false`, a turn-on without a matching Home Assistant `light.turn_on` call marks the light as manually controlled. Reloading clears that state, but the next physical turn-on can trigger it again.
+
+To adapt these turn-ons while still detecting later manual changes, enable `detect_non_ha_changes` and leave `manual_control_on_external_turn_on` disabled. This requires the light integration to report its state reliably. If you want Adaptive Lighting to keep adapting regardless of manual changes, disable `take_over_control` along with the options that require it: `detect_non_ha_changes`, `adapt_only_on_bare_turn_on`, and `manual_control_on_external_turn_on`.
+
+This explains the physical-switch case in [#1056](https://github.com/basnijholt/adaptive-lighting/issues/1056), but not every report in that thread. If the light is not listed in `manual_control`, include diagnostics and debug logs from the failed turn-on when reporting it. Lights returning from `unavailable` after a power cut are a separate case from an `off` to `on` state change.
+
+#### :bulb: Lights Not Responding or Turning On by Themselves
+
+Adaptive Lighting sends more commands to lights than a typical human user would. If your light control network is unhealthy, you may experience:
+
+- Laggy manual commands (e.g., turning lights on or off).
+- Unresponsive lights.
+- Home Assistant reporting incorrect light states, causing Adaptive Lighting to inadvertently turn lights back on.
+
+Most issues that appear to be caused by Adaptive Lighting are actually due to unrelated problems.
+Addressing these issues will significantly improve your Home Assistant experience.
+
+In case lights are suddenly turning on by themselves, this is most likely due to the light incorrectly reporting an "on" state to Home Assistant, leading to an undesired Adaptive Lighting action.
+To prevent adapting in cases *where the state of the light is suddenly "on" and only adapt if there is an associated `light.turn_on` service call*, set `detect_non_ha_changes: false`.
+
+To keep detecting manual changes to lights that are already on while leaving unmatched `off` to `on` state events unchanged, enable `manual_control_on_external_turn_on`. Matching uses the exact context of the most recently recorded `light.turn_on` call. Some integrations replace or omit that context, so Adaptive Lighting cannot distinguish every physical versus Home Assistant turn-on source.
+
+#### :signal_strength: WiFi Networks
+
+Ensure your light bulbs have a strong WiFi connection. If the signal strength is less than -70dBm, the connection may be weak and prone to dropping messages.
+
+#### :spider_web: Zigbee, Z-Wave, and Other Mesh Networks
+
+Mesh networks typically require powered devices to act as routers, relaying messages back to the central coordinator (the radio connected to Home Assistant).
+Most modern lights function as routers, very early models may not.
+If devices become unresponsive or fail to respond to commands, Adaptive Lighting can exacerbate the issue.
+Use network maps (available in ZHA, zigbee2mqtt, deCONZ, and ZWaveJS UI) to evaluate your network health.
+Smart plugs can be an affordable way to add more routers to your network.
+
+For most Zigbee networks, **using groups is essential for optimal performance**.
+For example, if you want to use Adaptive Lighting in a hallway with six bulbs, adding each bulb individually to the Adaptive Lighting configuration could overwhelm the network with commands.
+Instead, create a group in your Zigbee software (not a regular Home Assistant group) and add that single group to the Adaptive Lighting configuration.
+This sends a single broadcast command to adjust all bulbs, improving response times and keeping the bulbs in sync.
+
+As a rule of thumb, if you always control lights together (e.g., bulbs in a ceiling fixture), they should be in a Zigbee group.
+Expose only the group (not individual bulbs) in Home Assistant Dashboards and external systems like Google Home or Apple HomeKit.
+
+> :warning: **If you control lights individually, `manual_control` cannot behave correctly! If you need to control lights individually as well, use a [Home Assistant Light Group](https://www.home-assistant.io/integrations/group/).**
+
+When mixing group types, avoid nesting: do not add integration-level groups (e.g., Zigbee2MQTT groups) to a [Home Assistant Light Group](https://www.home-assistant.io/integrations/group/) that is managed by Adaptive Lighting, and do not nest Home Assistant Light Groups inside each other.
+Adaptive Lighting cannot expand an integration-level group into its member lights, and nested groups make it unpredictable which entity Adaptive Lighting tracks and adapts, which can prevent lights from being adapted at all (see [#1378](https://github.com/basnijholt/adaptive-lighting/issues/1378)).
+Instead, add the individual light entities or a single Zigbee group directly to the Adaptive Lighting configuration.
+Also note that bulbs turned on via a Zigbee group broadcast may briefly flash their last (cached) brightness and color before the adapted values arrive; this happens inside the bulbs and cannot be prevented by Home Assistant or Adaptive Lighting.
+
+#### :rainbow: Light Colors Not Matching
+
+Bulbs from different manufacturers or models may have varying color temperature specifications. For instance, if you have two Adaptive Lighting configurations—one with only Philips Hue White Ambiance bulbs and another with a mix of Philips Hue White Ambiance and Sengled bulbs—the Philips Hue bulbs may appear to have different color temperatures despite having identical settings.
+
+To resolve this:
+
+1.  Include only bulbs of the same make and model in a single Adaptive Lighting configuration.
+2.  Rearrange bulbs so that different color temperatures are not visible simultaneously.
+
+#### :bulb: Bulb-Specific Issues
+
+These lights are known to exhibit disadvantageous behaviour due to firmware bugs, insufficient functionality, or hardware limitations:
+
+- [Sengled Z01-A19NAE26](https://www.zigbee2mqtt.io/devices/Z01-A19NAE26.html#sengled-z01-a19nae26)
+  - Unexpected turn-ons: If Adaptive Lighting sends a long transition time (like the default 45 seconds), and the bulb is turned off during that time, it may turn back on after approximately 10 seconds to continue the transition command. Since the bulb is turning itself on, there will be no obvious trigger in Home Assistant or other logs indicating the cause of the light turning on. To fix this, set a much shorter `transition` time, such as 1 second.
+  - Heat sensitivity: Additionally, these bulbs may perform poorly in enclosed "dome" style ceiling lights, particularly when hot. While most LEDs (even non-smart ones) state in the fine print that they do not support working in enclosed fixtures, in practice, more expensive bulbs like Philips Hue generally perform better. To resolve this issue, move the problematic bulbs to open-air fixtures.
+- Ikea Tradfri bulbs/drivers (and related Ikea smart light products)
+  - Unsupported simultaneous transition of brightness and color: When receiving such a command, they switch the brightness instantly and only transition the color. To get smooth transitions of both brightness and color, enable `separate_turn_on_commands`.
+  - Unresponsiveness during color transitions: No other commands are processed during an ongoing color transition, e.g., turn-off commands are ignored and lights stay on despite being reported as off to Home Assistant. The default config with long transitions thus results in long periods of unresponsiveness. To work around this, disable transitions by setting `transition` to `0`, and increase the adaptation frequency by setting `interval` to a short time, e.g., `15` seconds, to retain the impression of smooth continuous adaptations. Keeping the `initial_transition` is recommended for a smooth fade-in (lights are usually not turned off momentarily after being turned on, in which case a short period of unresponsiveness is tolerable).
+- [Lonsonho ZB-RGBCW](https://www.zigbee2mqtt.io/devices/ZB-RGBCW.html#lonsonho-zb-rgbcw)
+  - Some Zigbee2MQTT/eWeLight firmware combinations do not turn the bulb on when the initial `light.turn_on` call includes brightness or color, although later adjustments work. Disable `intercept` for affected bulbs.
+
+<!-- OUTPUT:END -->
+
+## Getting Help
+
+If you're still having issues:
+
+1. Enable debug logging and capture the relevant logs
+2. Open an issue on [GitHub](https://github.com/basnijholt/adaptive-lighting/issues)
+3. Include:
+   - Your configuration (redact sensitive info)
+   - Debug logs
+   - Home Assistant version
+   - Description of expected vs actual behavior

hacs.json

@@ -1,5 +1,5 @@
 {
     "name": "Adaptive Lighting",
     "render_readme": true,
-    "homeassistant": "2022.11.0"
+    "homeassistant": "2025.9.0"
 }

pyproject.toml

@@ -0,0 +1,66 @@
+[build-system]
+requires = ["hatchling"]
+build-backend = "hatchling.build"
+
+[project]
+name = "adaptive-lighting"
+version = "1.32.0"
+description = "Automatically adjust brightness and color of lights based on the sun position"
+readme = "README.md"
+license = "Apache-2.0"
+requires-python = ">=3.12"
+
+[dependency-groups]
+docs = [
+    "astral",
+    "homeassistant",
+    "markdown-code-runner>=2.7.0",
+    "markdown-gfm-admonition",
+    "pandas",
+    "shinylive",
+    "tabulate",
+    "ulid-transform",
+    "voluptuous",
+    "zensical",
+]
+dev = [
+    "mypy",
+    "pre-commit",
+    "ruff",
+]
+
+[tool.hatch.build.targets.wheel]
+packages = ["custom_components/adaptive_lighting"]
+
+[tool.ruff]
+target-version = "py312"
+line-length = 88
+
+[tool.ruff.lint]
+select = [
+    "E",      # pycodestyle errors
+    "W",      # pycodestyle warnings
+    "F",      # Pyflakes
+    "I",      # isort
+    "UP",     # pyupgrade
+    "RUF",    # Ruff-specific rules
+    "B",      # flake8-bugbear
+    "C4",     # flake8-comprehensions
+    "SIM",    # flake8-simplify
+]
+ignore = [
+    "E501",   # line too long (handled by formatter)
+]
+
+[tool.ruff.lint.isort]
+known-first-party = ["adaptive_lighting"]
+
+[tool.mypy]
+python_version = "3.12"
+warn_return_any = true
+warn_unused_configs = true
+ignore_missing_imports = true
+
+[tool.pytest.ini_options]
+testpaths = ["tests"]
+asyncio_mode = "auto"